St. PETER’S UNIVERSITY
St. Peter’s Institute of Higher Education and Research
(Declared Under Section 3 of the UGC Act, 1956)
AVADI, CHENNAI – 600 054
TAMIL NADU
B. Sc (INTERIOR DISEGN)
(Code No.321)
(Effective From 2009 – 2010)
(Distance Education)
Regulations and Syllabus
(I &II& III YEAR)
St. PETER’S INSTITUTE OF DISTANCE EDUCATION
Recognized by Distance Education Council and
Joint Committee of UGC – AICTE - DEC, New Delhi
(Ref. F. No. DEC/SPU/CHN/TN/Recog/09/14 dated 02.04.2009 and
Ref.F.No.DEC/Recog/2009/3169 dated 09.09.2009)
St. PETER’S UNIVERSITY
St. PETER’S INSTITUTE OF DISTANCE EDUCATION
Chennai – 600 054.
Code No. – 321
B.Sc. (INTERIOR DESIGN)
(Distance Education)
Regulations and Syllabus
(Effective from 2009 – 2010)
1. Eligibility: Candidates who have passed the Higher Secondary
Examination conducted by the Government of Tamilnadu, or any other
examination recognized as equivalent thereto are eligible for admission to
Three Year B.Sc Programme in interior design.
2. Duration: Three Years.
3. Medium: English is the medium of instruction and examination.
4. Methodology: The methodology of distance education includes the supply
of self-instructional study materials in print format and in CD, face-to-face
instruction for theory and practicals for a limited period during week ends
and on holidays, provision of virtual class in phased manner, dissemination of
information over e-mail, Student - Support Service at various Centres of the
University, Continuous Assessment and End Assessment conducted by the
University at various parts of India.
5. Weightage for Continuous and End Assessment: There is no
weightage for Continuous Assessment unless the ratio is specifically
mentioned in the scheme of Examinations. The End Assessment (EA) has
100% weightage.
6. Credit System: Credit system be followed with 36 credits for each Year
and each credit is equivalent to 25-30 hours of effective study provided in
the Time Table of the formal system.
2
7. Scheme of Examinations
First Year
Code No
Course Title
Theory
109UTMT01 Tamil
109UHITO1 Hindi
109UEHT02 English
109UIDT03 Elements of Designs and Decorating Styles
109UIDT04 Floor , Ceiling Wall, Windows and Doors
109UIDT05 Planning For Space, Colour and Lighting
109UIDP01 Practical – Interior Design
Record
Total
Credit
6
6
6
6
6
6
36
Marks
EA Total
100 100
100
100
100
100
90
10
600
100
100
100
100
100
600
Second Year
Code No
209UIDT01
209UIDT02
209UIDT03
209UIDT04
209UIDT05
209UIDP01
Course Title
Theory
Construction Techniques
Interior Furnishings
Interior Design Management
Elements Of Service and Building Protection
Elements Of Decorative Materials
Practical- II
Record
Total
Credit
6
6
6
6
6
6
36
Marks
EA Total
100 100
100 100
100 100
100 100
100 100
90
100
10
600 600
Third Year
Code No
309UIDT01
309UIDT02
309UIDT03
309UIDT04
309UIDT05
309UIDP01
Course Title
Theory
Principles of Interior Designing
Interior Design Studio and Building Systems
Technology
Interior Design and Applied Art – Major Art
Communication Graphics Design and
Applied Arts on Textiles
Drawing Sculpture and Painting Interior
Design
Practical III – Interior Design Studio and
Building Systems Technology
Record
Total
3
Credit
6
6
Marks
EA Total
100 100
100 100
6
6
100
100
100
100
6
100
100
6
90
100
36
10
600
600
BACHELOR OF SCIENCE IN INTERIOR DESIGN
First Year
109UIDT03-Elements of Designs and Decorating Styles
UNIT - 01
POINT - NOTHINGNESS OF THE POINT - THINGS COME OUT OF NOTHING ABSTRACT
POINT
UNIT - 02
LINE - DEFINITION - TYPES OF LINES - STRAIGHT LINES - VERTICAL LINES –
HORIZONTAL
LINES - DIAGONAL LINES - ZIGZAG LINES
UNIT - 03
PLANES / SHAPES - NATURAL SHAPES - ABSTRACT SHAPES - GEOMETRIC SHAPES
–
FORM - FORM AND SHAPES
UNIT - 04
SIZE - TEXTURE - TYPES OF TEXTURE - VISUAL BALANCE - TEXTILE TEXTURE
UNIT - 05
COLOR - CLASSIFICATION OF COLORS - PRIMARY COLORS - SECONDARY COLORS
–
TERTIARY COLORS - CHARACTERISTICS OF COLORS
UNIT - 06
PATTERN - NATURALIST MOTIFS - GEOMETRICAL MOTIFS - UNITY GROUPING REPORTING – GRID
UNIT - 07
BALANCE - CLASSIFICATION
ASYMMETRICAL
BALANCE
OF
BALANCE
-
SYMMETRICAL
BALANCE
–
UNIT - 08
MONOTONY - TYPES OF MONOTONY - MONOTONY OF SHAPE - MONOTONY
COLORS -GEOMETRICAL - CONTRAST BY SHAPE - CONTRAST BY COLOR
UNIT - 09
EMPHASIS - DEFINITION - PRINCIPLES OF EMPHASIS - WHAT TO EMPHASIS - HOW
TO EMPHASIS - HOW MUCH OF EMPHASIS - EMPHASIS IN INTERIOR DESIGN
UNIT - 10
RHYTHM - METHODS OF RHYTHM - RHYTHM THROUGH REPETITION - RHYTHM
THROUGH A PROGRESSION OF SIZES - RHYTHMIC THROUGH A CONTINUOUS LINE
MOVEMENT
UNIT - 11
HARMONY - DEFINITION - PRINCIPLES OF HARMONY - REPETITION - CONTRAST TRANSITION - PROPORTION - PRINCIPLES OF PROPORTION – SCALES
UNIT - 12
DECORATING STYLE - SELECTION - PROCESSING - USING PROPERTIES - WALL
PAPER
DESIGN - COLORING STYLE
4
BACHELOR OF SCIENCE IN INTERIOR DESIGN
First Year
109UIDT04- Floor, Ceiling Wall, Windows and Doors
UNIT - 01
STUDY OF FLOOR - STRUCTURE AND ARRANGEMENT GROUND FLOOR - FIRST
FLOOR - JOINERIES - SUPERFICIAL WOODEN FLOOR
UNIT - 02
STUDY OF WOODEN FLOOR - STRUCTURE AND ARRANGEMENT - FIXING OF
SUPERFICIAL WOODEN FLOOR - TYPES OF WOODEN FLOOR
UNIT - 03
CEILING STRUCTURE - PREPARATION AND FABRICATION OF CEILING STRUCTURE CONCEPT OF SUPER STRUCTURE - FURNISHING ON WALLS
UNIT - 04
DECORATIVE STYLES OF CEILING - SUSPENDED CEILING JOINT LESS - FRAME AND
PANEL - STRIP - OPEN - FALSE CEILING
UNIT - 05
STUDY OF TIMBER - DEFINITION - CLASSIFICATION OF TREES - STRUCTURE OF
TREES - MACROSTRUCTURE
UNIT - 06
A STUDY OF TREES DEFECTS - TREES DEFECTS DUE TO INSECTS - BEETLES –
MARINE BEARERS - TERMITES - DEFECTS DUE TO NATURAL FORCES - DEFECTS
DUE TO SEASONING
UNIT - 07
QUALITY AND SEASONING OF GOOD TIMBER - SEASONING OF TIMBER –
MARKETING FORMS OF TIMBER - INDUSTRIAL TIMBER
UNIT - 08
STUDY OF PLY WOODS - ADVANTAGES OF PLY WOODS - USES OF TIMBER ADVANTAGES OF TIMBER CONSTRUCTION
UNIT - 09
DOORS TYPES - SPECIAL DOORS - SLIDING DOORS - SLIDING FOLDING DOOR ROLLING STEEL SHUTTER DOORS - REVOLVING DOORS - SIDE SLIDING DOORS
UNIT - 10
STEEL PLATED DOORS AND WINDOWS - METAL COVERED PLY WOOD DOORS CORRUGATED STEEL SHEET DOORS - SWINGING DOORS - DOORS IN
COMBINATION WITH WINDOWS
UNIT - 11
PAINTS AND PAINTING DESIGN - CHARACTERISTICS - BASES FOR PAINTING –
COLORING PIGMENTS FOR PAINTING - PROCESS OF PAINTING - PAINTING IN
DIFFERENT SURFACE
UNIT – 12
APPLICATION OF VARNISHES AND DISTEMPERS - CHARACTERISTICS OF COLD
VARNISH - TYPES OF VARNISHES - PROCESS OF VARNISHING - PROPERTIES OF
DISTEMPER – OIL VARNISHES - SPIRIT VARNISHES
5
BACHELOR OF SCIENCE IN INTERIOR DESIGN
First Year
109UIDT05- Planning For Space, Colour and Lighting
UNIT - 01
TYPES OF SHAPES - TEXTURE - PRINCIPLES - COMPOSITIONS - EXERCISES BALANCING RHYTHM - PROPORTION AND CONTRAST
UNIT - 02
COLOUR THEORY - DEFINITION - THE RELATION BETWEEN COLOUR & LIGHT
- SEEING - FACTORS RESPONSIBLE FOR THE SENSATION OF COLOUR LOUR SYSTEM – COLOUR SCHEME - PSYCHOLOGY OF COLOUR
UNIT - 03
COLOUR WHEEL - TONES - SHADES - TINES - COLOURS SCHEMES PSYCHOLOGY OF COLOURS
UNIT - 04
COLOUR WITH TEXTURE - IMPORTANCE OF COLOUR - COLOUR
PREFERENCES - DIFFERENT GROUPS OF PEOPLE AND INDIVIDUAL
UNIT - 05
PRINCIPAL OF DESIGN - LOGO DESIGN - CASE STUDY - 2D COMPOSITIONS THEME - ORGANIZATION – COMPANY
UNIT - 06
DEPICTING PRODUCT OR IDEAS - SKETCHING - SIMPLE OBJECTS
UNIT - 07
STUDY OF LIGHT EFFECTS - SKETCHING OF TEMPLE - MONUMENT ETC SKETCHING OF ROAD VIEW
UNIT - 08
ARTIFICIAL LIGHTING - ELECTRIFICATION - TYPES OF LIGHTING
ARRANGEMENT - DIRECT LIGHTING - INDIRECT LIGHTING - DIFFUSED
LIGHTING - COMPOSITE LIGHTING - CONCEALED LIGHT - VARIETY OF LAMPS
UNIT - 09
LIGHTING ACCESSORIES - LIGHTING DESIGN - TYPES OF LIGHTING POSITION - MOVEABLITLY - ADAPBILITY - ADJUSTABILITY - STATE PURPOSE
DIRECTION - ARCHITECTURAL - LAYOUT OF LIGHTING
UNIT - 10
RECOMMENDED VALUES OF ILLUMINATION - EMERGENCY LIGHTING
SYSTEM – LIGHT SOURCE FIXTURES - TYPE OF FLUORESCENT AND SODIUM
LAMPS - SOURCE OF LIGHTING COVER OF LIGHTING - PLANNING OF
LIGHTING - ELECTRICAL WIRING
UNIT - 11
ARCH - TECHNICAL TERMS - INTRA DOS - SOFFIT - SKEW BACK ETC
UNIT – 12
6
BACHELOR OF SCIENCE IN INTERIOR DESIGN
First Year
109UIDP01- Practical- Interior Design
UNIT – 01
1.MODEL MAKING.
2.MODEL MAKING OUT OF CARD BOARD - THERMACOL ETC.
3.CLAY - CERAMIC - PLASTER OF PARIS PROCESSING TECHNIQUES OF
FORMING AND
DECORATING.
4.COLOUR PIGMENTS ETC.
5.DISPLAY OF CERAMIC AND PLASTER OF PARIS WORKS.
6.WOOD WORKING WITH WOOD.
7.WOOD JOINERY AND ITS STRENGTH.
8.WOOD POLISHING AND SURFACE FINISHING.
9.WOODCARVING.
10.BAMBOO & CANE.
11.BAMBOO AND CANE JOINERY DETAILS, ITS STRENGTH.
12.POLISH AND SURFACE FINISHES.
TYPES OF ARCHES - DISADVANTAGES OF ARCHES - CENTERING FOR
ARCHES - LINTEL - CLASSIFICATION OF LINTEL
7
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Second Year
209UIDT01-Construction Techniques
UNIT - 01
PARTITION WALL - INTRODUCTION - ADVANTAGES - REQUIREMENTS FOR
GOOD PARTITION WALL - TYPES OF PARTITION WALLS – IMPORTANCE
UNIT - 02
BRICK PARTITIONS - CLAY BLACK PARTITIONS - GLASS BLOCK PARTITIONS
– STRAW BOARD PARTITIONS
UNIT - 03
HALLOW BLOCK PARTITIONS - CONCRETE PARTITIONS - WOODEN
PARTITIONS - PLASTER SLAB PARTITIONS - ASBESTOS CEMENT
UNIT - 04
A GOOD STAIRCASE - INTRODUCTION - DEFINITION - REQUIREMENTS OF A
GOOD STAIRCASE - CLASSIFICATION OF STAIRS
UNIT - 05
TYPES OF STAIRS - STRAIGHT STAIRS - QUARTER TURN STAIRS - HALF
TURN STAIRS - THREE QUARTERS TURN STAIRS - CIRCULAR STAIRS SPIRAL STAIRS - CURVED STAIRS - BIFURCARD STAIRS
UNIT - 06
INTRODUCTION - CONSTRUCTION OF STEPS - HANDRAIL - HEAD ROOM CUP BOARD UNDER STAIR
UNIT - 07
DOOR - SPECIAL DOORS - SLIDING DOORS - SLIDING FOLDING DOOR SHUTTER DOORS - REVOLVING DOORS
UNIT - 08
STEEL PLATED DOORS - METAL COVERED PLAY WOOD DOORS CORRUGATED STEEL DOORS - SWINGING DOORS
UNIT - 09
DOORS IN COMBINATION WITH WINDOWS - VENTILATIONS - M.S. SHEET
DOORS – SWING DOORS
UNIT - 10
ROLLING SHUTTER FIRE CHECK - WINDOW - BAY WINDOW - CABLE WINDOW
- SKY LIGHT - NORTH LIGHT
UNIT - 11
FLOORS - GROUND FLOOR - FIRST FLOOR - JOINERIES - SUPERFICIAL FLOORS – TYPES OF FLOORS
UNIT - 12
WOODEN FLOOR - SUPERFICIAL WOODEN FLOORS - FIXING OF
SUPERFICIAL WOODEN FLOOR - TYPES OF WOODEN FLOOR - MARKET
SURVEY.
1
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Second Year
209UIDT02-Interior Furnishings
UNIT - 01
ELECTRICITY - CONSUMPTION OF ELECTRICITY - PLANNING - TRAFFIC LAYOUT OF WIRING - SELECTION SAFETY - AESTHETICS
UNIT - 02
GUIDELINES: ELECTRIC AND COMMUNICATION DISTRIBUTION SYSTEMS IMPORTANCE - CLASSIFICATION
UNIT - 03
COMPUTER SUITE - CONCEPT - ADVANTAGE
INSTALLATION – CAVITY FLOOR - FALSE CEILING
-
REQUIREMENT
-
UNIT - 04
PARTITIONS AND DOORS - EMERGENCY DOOR - CAD FOR INTERIOR DESIGN
INTERCOM AND PABX SYSTEM
UNIT - 05
INDIAN INTERIOR DESIGN - INTRODUCTION - INFLUENCE OF RELIGIOUS
BELIEFS
UNIT - 06
DECORATION AND ORNAMENTATION - DEFINITION - PROPERTIES - TYPES
OF
DECORATION AND ORNAMENTATION
UNIT - 07
FIBERS - CLASSIFICATION OF FIBERS - YARN TWIST TYPES - FABRIC
STRUCTURE - TYPES OF SELVEDGES - PROPERTIES OF FIBERS - LIST OF
FIBERS
UNIT - 08
CARPETS AND RUGS - CONCEPT - CARPETS AND RUGS - MACHINE MADE
CARPETS - WOOD WOVEN - EMBOSSED DESIGN
UNIT - 09
COIR AND LATEX - RUBBERIZED COIR - DURRIES - COIR MATCHING HANDLOOM - POWER LOOM - DOOR WATER - LEATHER - FOAM
UNIT - 10
UPHOLSTERY - PURPOSE OF UPHOLSTERY - STRUCTURE OF UPHOLSTERY
UNIT - 11
CLOTH - COTTON CLOTH - JUTE CLOTH - SPIRAL SPRINGS - GUNNY CLOTH –
PADDING MATERIALS - LINING CLOTH - COVERING MATERIALS
UNIT - 12
DRAPERY - ESTIMATION DRAPERY - PURPOSE OF DRAPERY DEVELOPMENT OF DRAPERY - EVOLUTION OF CURTAIN HANGING - PELMET
PARTS OF DRAPERY
2
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Second Year
209UIDT03-Interior Design Management
UNIT - 01
FURNITURE - ELEMENTS OF FURNITURE - SOFA SEATING / MALES - SOFA
SEATING FEMALE - LOUNGE - CORNER LOUNGE CHAIR SEATING FOR MALE
AND FEMALE - LOUNGE SEATING CLEARANCE
UNIT - 02
RELATIONSHIP - RECLINING CHAIR WITH FOOT REST / MALE AND FEMALE WALL UNIT - ACCESS BY MALE AND FEMALE - WALL MOUNTED BAR UNIT ACCESS BY MALE / FEMALE
UNIT - 03
DINNING SPACES - OPTIMUM PLACE SETTING - MINIMUM PLACE SETTING –
MINIMUM TABLE WIDTH - RECTANGULAR TABLE - MINIMUM LENGTH AND
WIDTH / DINNING OF SIX
UNIT - 04
FURNITURE DESIGN - RECTANGULAR TABLE - OPTIMUM LENGTH AND
WIDTH / DINNING OF SIX - BREAK FAST / KITCHEN TABLE - CIRCULAR TABLE
FOR EIGHT – MINIMUM CLEARANCE FOR TWO BEHIND EXTENDED CHAIR BANQUET SEATING
UNIT - 05
ROOM SERVICE - SERVICE AND PASSAGE - IMPORTANCE OF ROOM
SERVICE AND PASSAGE
UNIT - 06
BED ROOM STRUCTURE - SINGLE AND DOUBLE BEDS - BEDROOM / VISION
AND SIGHT LINES - SINGLE BED - CLEARANCE AND DIMENSION - CLEANING
REQUIREMENTS
UNIT - 07
DRESSING ROOM - MAKE-UP - DRESSING - TABLE DRESSER - BED
CLEARANCES – ADULT BANK BEDS - FRONT ELEVATION - ADULT BANK BEDS
AND ELEVATION
UNIT - 08
COOKING SPACE - COUNTER AND BASE CABINETS - GENERAL CLEARANCE
– CABINET REACH COMPARISONS - SINK CENTER
UNIT - 09
BATHROOM
STRUCTURE
BATHROOM
LAVATORY
GENERAL
ANTHROPOMETRIC CONSIDERATIONS - WATER CLOSE - BIDET MINIMUM
SHOWER CLEARANCES – CHILL ANTHROPOMETRIC CONSIDERATIONS
UNIT - 10
DESIGNING OFFICE - PRIVATE OFFICE - EXECUTIVE DESK / VISITOR
SEATING – BASIC CLEARANCES - GENERAL OFFICE - BASIC WORKSTATION
WITH VISITOR SEATING - RECEPTION SPACES - RECEPTIONIST WORK
STATION / COUNTER HEIGHT - CONFERENCE FORMS - CONFERENCE
TABLES - SQUARE AND CIRCULAR – MERCANTILE SPACES
3
UNIT - 11
SEATED CUSTOMER - DESIRABLE COUNTER HEIGHT AND LOW COUNTER
HEIGHT - TABLE SIZES - MINIMUM TABLE WIDTH - OPTIMUM TABLE DEPTHS MINIMUM AND OPTIMUM DEPTHS - TABLE - CHAIR - SERVICE AISLE
UNIT - 12
TEXTILES - INTRODUCTION - INDIAN INTERIOR DESIGN - INFLUENCE OF
RELIGIOUS BELIEFS - DECORATION AND ORGANIZATION - CLASSIFICATION
OF FIBERS – YARN TWIST - TYPES - FABRIC STRUCTURE - TYPES OF
SELVEDGES - PROPERTIES OF FIBERS - LIST OF FIBERS
4
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Second Year
209UIDT04-Elements of Service and Building Protection
UNIT - 01
CLIMATE - STUDY OF CLIMATE CONDITION - AIR TEMPERATURE - RELATION
HUMIDITY - SOLAR RADIATION - IMPORTANCE OF RADIATION - PRODUCTION
FROM REPLETION
UNIT - 02
MEASUREMENT - METHODS OF MEASUREMENTS - SUNBATH DIAGRAM –
ORIENTATION OF INTERIOR OPENINGS - CHAJJAHS ETC - TROPICAL &
SUBTROPICAL CLIMATE – HOT AND DRY CLIMATE
UNIT - 03
VENTILATION - TYPES OF HEAT - SHEDDING OF HEAT - MOVEMENT OF AIR
CODING OF AIR - HUMIDIFICATION - MECHANICAL VENTILATION - NATURAL
VENTILATION – THERMAL CONTROL - THERMAL CONDUCTIVITY - K & U
VALUE - NATURAL DAY LIGHT – VISIBLE LIGHT - DESIGNING FOR DAY LIGHT DAY LIGHT CALCULATION - DAY LIGHT FACTOR
UNIT - 04
LIGHTING - COVERS & PLANNING OF LIGHT - POSITION OF LIGHTING POSITION OF LIGHTING POINTS - STRENGTH OF LIGHT - EFFECTIVE USE
LIGHT SOURCES – ARTIFICIAL LIGHT SOURCE
UNIT - 05
ELECTRIC LIGHT SOURCES - DEVELOPMENT OF NON ELECTRIC LIGHT
SOURCES – LAMP COLOR - DISTRIBUTION SYSTEMS - ADVANTAGES OF
ELECTRIC ENVIRONMENT - PROTECTION DEVICES - CARTRIDGE FUSES MINIATURE CIRCUIT BREAKER – EARTH PROTECTION - SAFETY - WIRING EAR THING
UNIT - 06
PLANNING - SOURCES OF WATER SUPPLY SYSTEM - TYPES OF PIPES –
PLUMING SYSTEMS, TAP VALUE & COCKS - STORAGE TANK - HOUSE
PLUMING - GEP-SET – DIT GAP - DOWN TAKE TAP ETC
UNIT - 07
WATER SUPPLY - HOT AND COLD SUPPLY - SANITARY ENGINEERING - ANTI
SIMPHONAGE PIPE - SIMPHONAGE SOIL PIPE - VENT PIPE WASTE WATER
PIPE – SEWER - SEWAGE DISPOSAL - WATER CARRIAGE SYSTEM &
CONSERVANCY LANE SYSTEMS
UNIT - 08
REFUSE DISPOSAL - TYPES OF DISPOSAL - QUALITY & QUANTITY OF
REFUSE - STORAGE & SEPARATION OF DISPOSAL - REFUSE COLLECTION RECOVERY OF REFUSE - SEPARATION OF SAWAGE - SYSTEMS OF
SANITATION
UNIT - 09
CONSERVANCY SYSTEM - WATER ARRANGE SYSTEMS - MERITS &
DEMERITS OF CONSERVANCY AND WATER GARAGE SYSTEMS - SEPTIC
TANK - CONSTRUCTION - DISPOSAL OF SEPTIC TANK SLUDGE - TREATMENT
5
UNIT - 10
SOIL ADSORPTION - METHODS OF SOIL ABSORPTION SYSTEMS - PIPE &
PIPE FITTING - TRAPS - REQUIREMENTS OF GOOD TRAPS - TYPES OF
TRAPS - PLUMBING OPERATION - LAYOUT OF SIMPLE - DRAINAGE SYSTEM SOAK PITS - MAN HOLES
UNIT - 11
SANITARY FITTING - TYPES OF SANITARY FITTINGS - DOMESTIC STORAGE
CAMPSITES - URINALS REQUIREMENTS FOR SANITARY FITTINGS - DRAINS &
SERVICES – OPEN DRAINS - DRAW SECTION
UNIT - 12
FIRE FIGHTING - CAUSES OF FIRE IN BUILDINGS - TYPES OF FIRE - SPREAD
OF FIRE - FIRE SAFETY - FIRE ESCAPE ROTES - OPENINGS - STAIRCASE FIRE LIGHTS – FIRE SAFETY - FIRE DISSECTION SYSTEMS - TYPES OF FIRE
DETECTION - FIRE ALARM - TYPES OF EXTINGUISHERS
6
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Second Year
209UIDT05-Elements of Decorative Materials
UNIT - 01
TREES FOR LIFE - DEFINITION - CLASSIFICATION OF TREES - SOFT WOOD
AND HARD WOODS - STRUCTURE OF TREES - FELLING STRUCTURE
UNIT - 02
TIMBER - DEFECTS IN TIMBER - NATURAL FORCES - QUALITIES OF GOOD
TIMBER - PRESERVATION OF TIMBER - INDUSTRIAL TIMBER - ADVANTAGE
OF PLY WOODS – USES OF TIMBER - INDIAN TIMBER TRACE
UNIT - 03
IRON ORES - INTRODUCTION - IRON - SELECTION OF IRON ORES MANUFACTURING OF PIG IRON - DRESSING - CALCINATIONS AND ROASTING
- SMELTING - PROPERTIES OF PIG IRON - TYPES - COMPOSITION OF CAST IRON USES OF CAST IRON - NONFERROUS
UNIT - 04
METALS - MANUFACTURE - PROPERTIES - EVALUATION AS BUILDING
MATERIAL – FORMS OF ALUMINUM - COBALT, COPPER, LEAD, MAGNESIUM,
NICKEL, TIN AND ZINC
UNIT - 05
ALLOYS - ALUMINUM ALLOYS - COPPER ALLOYS - MAGNESIUM ALLOYS NICKEL AND STEEL ALLOYS
UNIT - 06
STEEL - INTRODUCTION - MANUFACTURE OF STEEL - BESSEMER PROCESS
CEMENTATION PROCESS - CRUCIBLE STEEL PROCESS - DUPLEX PROCESS
– ELECTRIC PROCESS - L.D. PROCESS - OPEN - HEARTY PROCESS
UNIT - 07
PHYSICAL PROPERTIES OF STEEL - FACTORS AFFECTING PHYSICAL
PROPERTIES OF STEEL - MAGNETIC PROPERTIES OF STEEL - DEFECTS IN
STEEL - PROPERTIES OF MILD AND HARD STEEL
UNIT - 08
GLASS - INTRODUCTION - CLASSIFICATION OF GLASS - SODA LIME GLASS –
POTASH LIME GLASS - POTASH LEAD GLASS - COMMON GLASS MANUFACTURE OF GLASS - COLLECTION OF GLASS
UNIT - 09
RAW MATERIALS - COLLECTION OF RAW MATERIALS - PREPARATION OF
BATCH - MELTING IN FURNACE - FABRICATION - ANNEALING - TREATMENT
OF GLASS – SPECIAL VERIFIES OF GLASS
UNIT - 10
PAINTS - BASES FOR PAINTS - COLORING PIGMENTS FOR PAINTS - TYPES
OF PAINTS - ALUMINUM PAINT - ANTI CORROSIVE PAINT - PLASTICS PAINT
EDICT PAIN TINTING ON DIFFERENT SURFACES - REPAINTINTING OLD
WOOD WORK ETC
7
UNIT - 11
VARNISHES - TYPES OF VARNISHES - OIL VARNISHES - SPIRIT VARNISHES TURPENTINE VARNISHES - WATER VARNISHES - DEFECTS IN POUNDING
UNIT - 12
DISTEMPER - PROCESS OF VARNISHING - PROPERTIES OF DISTEMPERS –
INGREDIENTS OF DISTEMPER - PROCESS OF DISTEMPER - WALL PAPER WHITE - WASHING – COLOR WASHING
8
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Second Year
209UIDP01-Practical II
UNIT – 01
1.PHOTOGRAPHY.
2.WEAVING.
3.STUDY OF DIFFERENT FABRICS USED IN INTERIORS.
4.UPHOLSTERY - LEATHER MATERIAL STUDY.
5.GLASS - STAIN GLASS - GLASS ETCHING - FUSION PROCESS - DEEP
ETCHING ETC.
6.COMPUTER APPLICATION.
7.WORKING IN 3D SPACE.
8.W.C.S - U.C.S.
9.WIRE FRAMES.
10.SURFACE TEXTURES - TECHNIQUES.
11.PRINTING - PLOTTING.
12.SMALL PROJECT.
9
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Third Year
309UIDT01-Principles of Interior Designing
UNIT - 01
BUILDING SYSTEM (THEORY) - THE MAIN OBJECTIVE OF THE SUBJECT IS TO
HELP THE STUDENT GET AN UNDERSTANDING THE VARIOUS MATERIALS
AND METHOD OF INTERIOR CONSTRUCTION SO THAT THIS KNOWLEDGE
CAN BE INTEGRATED WITH THE DESIGN.
UNIT - 02
BUILDING / INTERIOR MATERIALS - TYPES AND USES ONLY (STONE, BRICK,
TIMBER, WOOD BASED MATERIALS, PAINT / VARNISHES, CERAMICS, TILES,
ARCHITECTURAL METALS LIKE STEEL AND ALUMINIMUM).
UNIT - 03
BUILDING / INTERIOR CONSTRUCTION - AN INTRODUCTION TO VARIOUS
CONSTRUCTION TECHNIQUES IN INTERIORS (JOINERY, ENGLISH / FLEMISH
BONDS IN BRICKS, TIMBER STAIRCASE, CLADDING, DETAILS OF DOORS,
WINDOWS,CUPBOARDS, PARTITIONS, FURNITURE, ARCHES, LINTELS,
FLOORING, ROOFING, CEILING).
UNIT - 04
MECHANICAL AND SANITARY SERVICES - I. MECHANICAL SYSTEMS: LIFTS
AND ESCALATORS - II. SANITARY SERVICES - WATER SUPPLY SYSTEM
WITHIN BUILDING - DRAINAGE SYSTEM FOR RESIDENCE (HOUSE DRAINAGE)
- SANITARY APPARATUS.
UNIT - 05
RAIN WATER HARVESTING - PURPOSE - USE - REQUIREMENT - METHODS
UNIT - 06
PRINCIPLES OF INTERIOR DESIGN - I. LANDSCAPE GARDENING AND HOUSE
PLANTS - FLOWER ARRANGEMENT - II. ART IN FOOD SERVICE - DIFFERENT
STYLES - III. CURRENT TRENDS IN INTERIOR DESIGN.
UNIT - 07
PRINCIPLES OF INTERIOR DESIGN - IV. LABOUR SAVING EQUIPMENT AND
APPLIANCES - V. IMPACT OF SOCIAL AND ECONOMIC CHANGE - VI.
REFINISH AND RENOVATE OLD FURNITURE - VII. BASIC HOME REPAIRS VIII.STUDY OF FENG SHUI AND VASTU AS USED IN MODERN HOMES.
1
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Third Year
309UIDT02- Interior Design Studio and Building Systems Technology
UNIT - 01
BUILDING SYSTEM (THEORY) - ACOUSTICS - ROOM ACOUSTICS - NOISE
CONTROL WITHIN A SPACE - AUDITORIUM ACOUSTICS.
UNIT - 02
PRINCIPLES OF ILLUMINATION - TYPE LIGHTING FIXTURES - LIGHTING
DESIGN IN RESIDENCES - OFFICES AND STORES.
UNIT - 03
AIR CONDITIONING - PRINCIPLES OF A. C SYSTEM, TYPES OF A.C.,
APPLICATION IN BUILDING LIKE APARTMENTS AND GUEST ROOMS,
LIBRARIES, MUSEUMS AND HOSPITALS.
UNIT - 04
ELECTRICAL SERVICES - ELECTRICALSYSTEM SYMBOLS USED - 3 PHASE
SYSTEM - SINGLE PHASE -SIMPLE ELECTRICAL LAYOUTS.
UNIT - 05
BUILDING BYE-LAWS (M.M.D.A) NO. OF HOURS.
2
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Third Year
309UIDT03- Interior Design and Applied Art – Major Art
UNIT - 01
MINOR & MAJOR ARTS -1.METAL WORK - SHAPING OF METAL, DECORATION,
DAMASCENING, ENAMELING, METAL WORK IN INDIA - B) LAMPS & VESSELS
C) BIDRI D) TANJORE PLATE ENAMELING IN INDIA - 2. GLASS WARE STAINED GLASS HISTORY DEVELOPMENT AND ITS USAGE IN MODERN
INTERIORS. VARIOUS TYPES OF GLASS AND GLASSWARE.
UNIT - 02
STUDY OF DIFFERENT ARCHITECTURAL STYLES - FORMS IN RELATION TO
DIFFERENT PLACES IN INDIA AND THE WEST. INDIA - BUDDHIST STUPAS,
VIHANAS - SOUTH INDIAN TEMPLE ARCHITECTURE - A BRIEF STUDY OF THE
BRIHADESWARA I CHIDAMBARAM TEMPLES - NORTH INDIAN TEMPLE
ARCHITECTURE - ORISSAN TEMPLES -WEST - EGYPTIAN - GREEK - ROMAN EARLY CHRISTIAN - BYZANTINE - ROMANESQUE AND GOTHIC.
UNIT - 03
SCULPTURAL FORMS - A) TYPES - SCULPTURE IN ROUND, RELIEF
SCULPTURE AND INTAGLIO - B) MATERIALS - HARD AND PLASTIC - C)
PROCESSES - CARVING, MODELING, AND CASTING, ASSEMBLAGE - D)
FUNCTION - DEPENDENT OR INDEPENDENT ON ARCHITECTURE - E)
SELECTION OF APPROPRIATE SCULPTURE FOR VARIOUS INTERIORS.
UNIT - 04
DRAWING - PENCIL - CRAYON - PEN AND INK AND CHARCOAL.
UNIT - 05
PAINTING - TRADITIONAL MEDIA - FRESCO - TEMPERA - OIL AND WATERCOLOURS - SYNTHETIC MEDIA - ACRYLIC.
3
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Third Year
309UIDT04- Communication Graphics Design and Applied Arts on Textiles
UNIT - 01
AWARENESS OF VARIOUS GRAPHIC PROCESSES FOR STUDENTS TO
FUNCTION IN ANY PUBLISHING HOUSE - - INDUSTRIAL TRAINING.
UNIT - 02
TO PROVIDE THEORETICAL AND PRACTICAL KNOWLEDGE OF BASIC DESIGN
PROCESSES OF ANY PUBLISHING PROCESS - INDUSTRIAL TRAINING.
UNIT - 03
I PUBLISHING DESIGN - A) EVOLUTION AND HISTORY - B) ART OF THE BOOK
– HISTORY EVOLUTION - C) PRINTING PROCESSES - D) TYPES - BOOKLETS,
BROCHURES, FOLDERS, POSTERS.
UNIT - 04
ADVERTISING - 1. A) ROLE OF A ADVERTISING IN MODERN LIFE A) HISTORY,
EVOLUTION. B) DEFINITION C) ADVANTAGES AND DISADVANTAGES D)
ADVERTISING APPEALS C) ADVERTISING THROUGH PRINT MEDIA F)
BROADCAST MEDIA G) OUTDOOR ADVERTISING - 2. DESIGN ORIGIN AND
EVOLUTION OF LOGOS - 3. COPYWRITING – AN EFFECTIVE TOOL IN
ADVERTISING - 4. MARKETING - A POTENT TOOL IN ADVERTISING FUNDAMENTAL PROCESSES - 5. TYPOGRAPHY - VARIOUS ASPECTS.
UNIT - 05
PHOTOGRAPHY - CAMERA - FUNCTIONS AND USES - PHOTOGRAPHIC
PROCESSES – A BASIC UNDERSTANDING.
UNIT - 06
APPLIED ART ON TEXTILES - HAND PRINTING METHODS - BLOCK - STENCIL TIE AND DYE - SCREEN PRINTING AND BATIK - STUDY OF FIGURE
IRREGULARITIES AND WHAT CAN BE DONE THROUGH DESIGN AND OPTICAL
ILLUTION TO MINIMISE THE EFFECT.
UNIT - 07
TYPES OF EMBROIDERY - MACHINE EMBROIDERY - APPLIQUE - CUT WORK –
DRAWN THREAD WORK - BREAD WORK - SEQUINS - MIRROR WORK CROCHETING AND TATTING.
UNIT - 08
VARIOUS EMBROIDERY OF INDIA - FOLK EMBROIDERY - PHULKARKI KASUTI - KANTHA - HEER - QUILTING - SHAWLS - CHAMBA RUMAL.
UNIT - 09
KNITTING - TYPES OF KNITTING - MACHINE AND HAND KNITTING - COMMON
STITCHES USED IN HAND KNITTING.
4
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Third Year
309UIDT05-Drawing Sculpture and Printing Interior Design
UNIT - 01
SCULPTURE AND PAINTING IN THE WEST - A) ANCIENT ART - 1) EGYPTAIN
ART- OLD KINGDOM, NEW KINGDOM - 2) SUMERIAN ART - 3) ASSYRIAN ART RELIEF.
UNIT - 02
B) CLASSICAL ART - 1) GREEK ART - ARCHARIC PERIOD, CLASSICAL PERIOD,
HELLERUISTIC PERIOD - 2) ROMAN ART - PORTRAIT SCULPTURE.
UNIT - 03
C) MEDIEVAL ART - 1. EARLY CHRISTIAN ART - CATACOMBS - 2. BYZANTINE
ART - MOSAICS - 3. ROMAN ESQE ART - 4. GOTHIC ART.
UNIT - 04
D) RENAISSANCE ART - 1. ITALY - EARIY AND HIGH RENAISSANCE - 2.
BAROQUE.
UNIT - 05
NORTH - FLANDERS: ALBRECHT DURER, MATHAIS GRUNEWALD - SPAIN: EL
GRECO VELASQUEZ, GOYA.
UNIT - 06
HOLLAND: FRANS HALS, REMRANDT, JAN VERMEER, LITTLE DUTCH
MASTERS - FRANCE: NICOLAS POUSSIN JACQUES - LOIS DAVID, ANTOIN
WATHEAU, FOUNTAIN BLEU SCHOOL, DELACROIX.
UNIT - 07
ENGLAND: WILLIAM HOGARTH, THOMAS GAINS
REYNOLDS JOHN CONSTABLE, WILLIAM TURNER.
BOROUHG,
JOSHUA
UNIT - 08
MODERN ART - REALISM - IMPRESSIONISM - MANET - MONET - PISARRO.
POST - IMPRESSIONISM ART NOUVEAU FAUVISM - CUBISM FUTURISM EXPRESSIONISM - SURREALISM - ABSTRACT ART - ABSTRACT
EXPRESSIONISM - VISITS TO VARIOUS ART GALLERIES - EXHIBITIONS MUSEUMS AND PLACES OF ARTISTIC VALUE.
5
BACHELOR OF SCIENCE IN INTERIOR DESIGN
Third Year
309UIDP01- Practical III – Interior Design Studio and Building Systems
Technology
UNIT - 01
THE MAIN OBJECTIVE OF DESIGN STUDIO IS TO ACQUIANT THE STUDENT
WITH SYMBOLS AND TO IMPART NECESSARY DRAFTING SKILLS TO
EXPRESS DESIGN IDEAS. TO DEVELOP THE CREATIVE POTENTIAL OF THE
STUDENTS THROUGH DESIGN EXERCISE
DRAWING STUDIO:
MEASURE DRAWING USE OF DRAWING INSTRUMENTS, TYPES OF LINES,
LETTERING SYMBOLS, DIMENSIONING, USE OF SCALES.
PRACTICAL
1. FLOWER ARRANGEMENT.
2. TABLE SETTING.
3. SURVEY ON LATEST MATERIALS AND APPLIANCES AVAILABLE.
4. VISIT TO APPLIANCE STORES, ANTIQUE STORES & GARDENS.
5. DETAILS OF FURNITURE, MEASURES DRAWING OF FURNITURE.
6. DESIGN STUDIO:
1. EXERCISE OS DESIGN OF SIMPLE INTERIORS EXAMPLE - INTERIOR OF
BEDROOMS, KITCHENS, BATHROOMS, RESTAURANTS, SHOPS, HOTEL
LOBBY ETC.
2. AN INITIAL STUDY OF SIMILAR SPACE ANTHROPOMETRIC STUDY.
7. BASIC SKETCHING EXERCISES, DRAWING FROM OBJECTS, NATURE ETC.
8. STAINED GLASS PAINTING.
9. ACRYLIC PAINTING ON TABLES, POTS ETC.
10. VISITS TO CRAFT MELAS, EXHIBITIONS, GALLERIES ETC.
6