Malancha Ghosh
56 Rockwell Circle
Marlboro, NJ 07746
Telephone: (732) 972-1371 (H)
(732) 299-2026 (C)
E-mail: malan_tea@yahoo.com
US Citizen
OBJECTIVE
To obtain a job in the engineering industry in which I can utilize and extend my skills, knowledge, and years of
experience in Electrical Engineering/Designing.
EDUCATION Jadavpur University – Calcutta, India
BSEE (Bachelor of Electronic and Telecommunication Engineer) with High Honors.
SKM SYSTEM ANALYSIS CERTIFICATION, Torrance, CA – PTW Interface, CAPTOR, DAPPER,
TMS, ARC FLASH Hazard Analysis, Equipment Evaluation, Comprehensive Short Circuit Study.
Kvaerner Process, Bridgewater, NJ
PDMS CERTIFICATION 3D Design for Electrical Engineering
Cadcenter – Wilmington, DE
Principles of PDMS – Plant Design Management System in equipment, piping, and electrical cable tray design,
a computer program that allows the simulation of a full-sized models of all the significant parts of process plant.
PROFESSIONAL SKILLS:
SKM System Analysis, Electrical Engineering/Designing responsibility of Cogeneration Study of Combined
Heat and Power Plant (CHP) using Turbine Generator, HRSG (Heat Recovery Steam Generator), Black Start
Generator with Paralleling SWGR, Designed Solar Projects with PV Modules, SATCON, SMA Inverters &
Micro Inverters.
Experience includes:
 Engineering Design in Power Distributions of 35KV, 12KV, 5kV, 480V and Conceptual Design in
developing Single line diagrams, Over current Coordination, TCC & Captor Module by using SKM
Software, Substation Design, Calculations and Specifications for MV Switchgear, MCC, Unit
Substations. Designing Lighting, grounding, Underground Duct bank system, Tray & Conduit layouts,
Elevation & Sectional Views, Cable Tray Design & Raceway connections to Equipments. Motor
control center (MCC), voltage drop calculations, Panel schedules, Motor Elementary/Schematics using
PLC, SCADA, Balance of Plant.
 Uninterruptable Power System, Fire Alarm System, & Riser diagram, writing specifications for
Electrical Equipments, Extensive user of NEC Codes, NFPA70, NEC Article 690 (Solar Photovoltaic
Systems), Eaton Application Guidelines etc, .Hazardous (Classified) Locations.
 Designed SWGR, MCC and Substations with all the Load Calculations
 Designed Entire Solar Projects with Direct Grid MICRO INVERTERS, SATCON Inverters.
 Engineered the Calculations for Selecting Inverters based on Feasibility & DC/AC Single Line.
 Extensive experience in AutoCAD 3D & 2D (2011) and Micro station, & Modeling 3D PDMS.
 Microsoft Word, Excel & Power Point, 3D Visual Basic 2.6 for Lighting Design.
EXPERIENCE:
Consulting Solar Project Design Work: 4/11-Present
Nexus Solar Project, Lawrenceville, NJ
 Designed Entire Photo Voltaic Solar Roof Top Design, Stringing Calculations for PV Modules
coordinating with Inverters, Combiner specifications & compliance with the Project scheme.
 Surveying client’s site to evaluate overall Design.
 Calculations for Selecting Inverters for Number of Inputs and Fuse Ratings, DC Single Lines,
Overall AC Single Lines.
 Sizing conductors for Combiners and Recombiner Boxes from VD Calc from Spreadsheet.
Alquimi Solar Project , Saddle Brook, NJ & Patwin Plastic Project, Linden, NJ
 Performing Feasibility Calculations for entire solar Projects & to comply with the site assessment of
the existing facility & Selecting Inverter.
 Providing Bill of Materials for Bidding Requirements for contractors.
 Designing Mono Crystalline, Poly Crystalline PV Modules and SOLYNDRA 200 Series.
 Designed and familiar with all the Application Guidelines with
1. Direct Grid Technologies, DGM-S460 Micro Inverters, WAGO AC Combiner Box,
2. Stringing Calculations using SMA, SATCON, SOLYNDRA Guide lines.
SYSKA HENNESY GROUP Consulting Engineers – Princeton, NJ
4/07-10/10: Electrical Engineer/Designer
 Substation Projects FH Substation, SaltWell & CLPL Substation for US NAVY at Naws China Lake
California, Developed Single Lines and Substation design, Electrical Power Distributions for 35 KV
substations, Site plans coordinating with Civil and HVAC, underground Duct banks, & Duct bank
Details and Lighting Floor Plans. Breaker Control Wiring Diagrams from single lines and Vendor
Drawings. Prepared Schematic Diagrams for Process equipments.

Combined Heat and Power Plant for Foxwoods Resort Casino
Designed Combined Heat and Power Project using 500 KW, 480V Black Start Generator for 7.5MW,
4160V Gas Turbine Generator with Heat Recovery and Steam Generation, Site distribution, Designing
Control Layouts and Schedules coordinating with Solar Turbines vendors, Power Distribution includes
Conduits & Cable Tray size calculations, layouts, One Line 23KV COGEN Plant & CL&P Interface.
 Ortho McNeill Pharmaceutical Cogeneration Project, Raritan, NJ
4.5KV COGEN Plant with Paralleling SWGR, Power Distribution and Control Wirings Coordinating
with GE JENBACHER Vendors & Shop Drawings and P&I Drawings for Control layouts.
 Sharp Grossmont Hospital, La Mesa, California, Cogeneration Project (Auto CAD 3D)
Submitted three Optional Proposal Packages and Designed 12KV Service with two Central Plants
Substations, Engineered Load Calculations for overall S/L and MCC S/L. Coordinated with Existing
Central Utility Plant, Power, Physical and Site Layout with other Disciplines.
 John Wayne Airport Project, Orange County, California
Completed Proposal work, Developed detail design of 12 KV Paralleling SWGR with 4 Generators,
Developing Site, Power and Control Plan drawings and Power and Control Schedules studying
coordination with S/L & GE Zenith Shop Drawings.
FMC ASSOCIATES Consulting Engineers – New York, NY
3/05-4/07: Electrical Engineer/Designer
 Responsible for Surveys & Designing for Electrical Power Distributions and Lighting Floor Plans, Fire
Alarm & Riser Diagrams & Specification sheets for various projects of New York City.
 Responsible for Punch list (Quality Assurance Checking) & meeting clients & coordinating with
HVAC, Plumbing & Sprinkler Engineers for all the projects.
AT&T/Highland Associates – Bridgewater, NJ
7/03-3/05: Electrical Engineer/Designer
 Preparing and assembling Electrical Construction and Building Retrofits from small fit ups to entire
building. Designing, Reviewing Power & Lighting plans using Base Power in AT&T SCIF (Sensitive
Compartment Information Facilities) Buildings, Communication, Telephone & Data Plans including all
Electrical Schedules and Specifications.
 Responsible for meeting client’s requirements, taking necessary Field trips for assembling design with
other disciplines for all AT&T Global Real Estate Building Engineering.
Aker Kvaerner Process – Bridgewater, NJ
3/96 -5/03: Electrical Engineer/Designer/PDMS
Imclone Project, Immunex Project
 Responsible for developing single lines, Transformer sizing, Breaker & cable Sizing.
 Collaborated with other disciplines for analyzing & modeling the lights and added lighting attributes on
3D Model for extraction of PDMS draft lighting plan including intelligent extraction from models for
use in reports and for scheduling for PDMS 2D drafting.
 Worked on lighting design and panel schedules using excel.
 Estimated Cable and Tray Material takeoff calculations (bill of materials).
 Worked & coordinated with the team of other disciplines on entire electrical grounding above as well as
underground which includes extraction from 3-D model to AutoCAD compiling.
On-Board Chemical Corporation/DuPont (Client) – Edison, NJ
7/89-2/96: Electrical Engineer/Designer
Tyvek Project, Mylar Project, Luxemburg
 Generated Electrical Schematics and Block diagrams from P&ID, Instrument schedule & Scope of
Work designing in AutoCAD and Microstation drawings, Single lines, Wiring Diagrams.
References
Daniel Villanueva, Elec. Eng.PE, Traction Power Specialist (Former Supervisor Syska Hennessy Group)
STV Incorporated, 1818 Market Street, Philadelphia, PA 19103
Phone (215) 832-3572 (Office) (215) 837-5293 (Cell)
Robert Smith, Associate Partner, Syska Hennessy Group (Electrical Engineer)
105 College Road East, Princeton, NJ 08540 Phone (609)-378-0262 (Office)
Joseph J. Capozzi,
Project Manager, Facilities Projects (Former Kvaerner Principal Engineer)
Johnson controls Inc. Raritan, NJ 08869 Phone (908) 218-7398 (Office). (908) 313-8761 (Cell)
Quindi Guiseppe, III, PE CEM ( Syska Hennessy Group, Associate Partner Lead Supervisor)
105 College Road East, Princeton, NJ 08540 Phone (609)-378-0245 (Office)
Robert Ragno
Engineering Manager-Electrical and Controls
Jacob Engineering Inc. Mount Laurel, NJ 08054 Phone (856) 780-9754 (Office). (856) 220-4152 (Cell)