IIW Doc. IV-1178-14
Draft Agenda 2014
International Institute of Welding
Commission IV - Power Beam Processes
Annual Assembly 2014
Monday – Wednesday, July 14-16, 2014
Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea
Monday 14 July. 2014, 14.00 h -18.00 h., Room: Mugunghwa Hall 2 (1F)
1.
Opening of the Meeting
2.
Appointment of Secretary
3.
Adoption of Agenda (Doc. IV-1178-14)
4.
Approval of the minutes in connection with the last annual assembly in Essen, Germany
(Doc. IV-1252-13)
8.
Brief report from the Intermediate Meeting in Wels, Austria, March 2014
9.
Comm.IV presentations:
1
IIW Doc. IV-1178-14
Monday 14 July 2014, 14:00 h -17.00 h., Room: Mugunghwa Hall 2 (1F)
[1] The electron beam as a welding tool: German study on the state of the art and future requirements.
S. Böhm (Germany)
Doc.IV-1169-14
[2] Electron Beam Welding of aluminium to copper: Mechanical properties and their relation to
microstructure
C. Otten (Germany)
Doc.IV-1172-14
[3] Effects of machining and cleaning on the electron beam welding of 304L Stainless Steel, Titanium
alloy Ti-6Al-4V, and Aluminum alloy 5052
P.W Hochanadel, P. Burgardt, D.D. Kautz, C.E. Cross, J.O. Sutton (USA)
Doc.IV-1170-14
[4] Metallurgy and strength behaviour of laser wire cladded layers using pulsed Nd:YAG lasers
J. Neubert, S. Keitel (Germany)
Doc.IV-1171-14
Coffee Break
[5] A comparatives Study on Microstructure of Inconel 617 welding joint fabricated by fiber laser and
CO2 laser
Z. Li, F. Lu, W. Ren, X. Liu, P. Wang, Y. Ding, Y. Wu (China)
Doc.IV-1173-14
[6] Mapping of stress raising in laser clad components depending on geometry and defects
F. H. Kaplan, M. M. Alam, J. Tuominen, P. Vuoristo, J. Miettinen, J. Poutala, J. Näkki, J. Junkala, T.
Peltola, Z. Barsoum (Sweden)
Doc.IV-1174-14
2
IIW Doc. IV-1178-14
[7] Process optimization during the laser welding process of high alloyed steels using additional hot
spots
F. B. Simon, F. Nagel, J. Hildebrand, J. P. Bergmann (Germany)
Doc.IV-1168-14
Tuesday 15 July 2014, 8.30 h -17.00 h., Room: Mugunghwa Hall 2 (1F)
Joint Meeting of Comm.IV, Comm.XII and SG212
Morning Session 8.30h-12.30h
[8] Determination of the Net Heat Input in Arc Welding
O. Liskevych, A. Scotti (Brazil)
Doc.212-1322-14, Doc.IV-1186-14
[9] Index for identifying hot or cold GMAW process conditions
G. Huismann (Germany)
Doc.XII-2178-14, Doc.IV-1187-14, 212-1337-14
[10] Wire-feed additive manufacturing of metal components: technologies, developments and future
interests
D. Ding, Z. Pan, D. Cuiuri, H. Li (Australlia)
Doc.XII-2181-14, Doc.IV-1188-14, 212-1338-14
[11] 3D Dynamic Distribution of Arc Radiation and Temperature in Pulsed-current micro-plasma arc
welding
J. He, S. Lin-Yang, F. Wang (China)
Doc.212-1332-14, Doc.IV-1189-14
Coffee break
3
IIW Doc. IV-1178-14
[12] Dynamic variation of keyhole exit and its control in plasma arc welding
C.S. Wu, Z.M.Liu, G.K.Zhang (China)
Doc. XII-2173-14, Doc.IV-1190-14, 212-1339-14
[13] Contact-less temperature measurement and control with applications to laser cladding
H. Köhler, C. Thomy, F. Vollertsen (Germany)
Doc.IV-1181-14, Doc.IV-1191-14, 212-1340-14
[14] Estimation of Welding Deformation Based on CFD Process Simulation
J. Cheon, D.V. Kiran, S-W. Han, L. Wu, S-J. Na (Korea)
Doc.212-1327-14, Doc.IV-1192-14
[15] Interaction of CO2-laser beam with argon plasma of GTA
U. Reisgen, A. Zabirov, I. Krivtsun, V. Demchenko, I. Krikent (Germany)
Doc.212-1329-14, Doc.IV-1193-14
Afternoon Session 14.00h-17.00h
[16] 3D simulation of arc plasma and weld pool behavior for coupled arc assisted activating TIG
welding
D. Fan, X.X. Wang, J.K. Huang, Y. Huang (China)
Doc.212-1330-14, Doc.IV-1194-14
[17] Additive manufacturing, a derivative of welding & joining technology- A literature review
S.Marya, J. Y. Hascoet, S.K.Panigrahi, M. Marya and V. Singh (France)
Doc.XII-2185-14, Doc.IV-1195-14, 212-1341-14
[18] Super-high power fiber laser welding under low vacuum and its phenomena
S. Katayama, M. Mizutani, Y. Kawahito (Japan)
Doc.IV-1183-14, Doc.IV-1196-14, 212-1342-14
4
IIW Doc. IV-1178-14
[19] In-situ alloying of AISI 410L martensitic stainless steel with nitrogen during laser cladding
C.J. Van Niekerk, M. Du Toit, C. Van Rooyen (South Africa)
Doc.IV-1175-14, Doc.IV-1197-14, 212-1343-14
Coffee break
[20] Molten Pool Flow Patterns in High Power Laser Keyhole Welding
S-W. Han, J. Cheon, S-J. Na (Korea)
Doc.212-1328-14, Doc.IV-1198-14
[21] Bridgeability of increasing gap in laser-GMA-hybrid welding of 22MnB5
H. Kügler (Germany)
Doc.XII-2169-14, Doc.IV-1199-14, 212-1344-14
Wednesday 16 Sept. 2013, 14.00 h -17.00 h., Room: Mugunghwa Hall 2 (1F)
[23] AWS D20 Committee Fabrication of Additively Manufactured Parts
D. D. Kautz, T. A. Palmer, P. W. Hochanadel, A. M. Alonso (USA)
Doc.IV-1177-14
[22] Laser Material Processing of CFRP Composites using a nanosecond-pulsed Q-Switch YAG Laser
M. Kutsuna, H. Inoue (Japan)
Doc.IV-1176-14
[24] Improvement of Fatigue Life and Surface Properties of High Reliability Metallic Parts by Laser
Shock Processing
J. L. Ocaña (Spain)
Doc.IV-1179-14
5
IIW Doc. IV-1178-14
[25] Development of a laser welding and straightening process for aircraft structures for Hybrid Laminar
Flow Control
V. Schultz, C. Thomy, F. Vollertsen, G. Schrauf (Germany)
Doc.IV-1180-14
Coffee Break
[26] Decreasing pore formation in multiple-sheet laser joining with interfacial polymeric residues
P. Woizeschke (Germany)
Doc.IV-1184-14
[27] Fundamental research of 100 kW ultra-high power fiber laser welding
S. Katayama, M. Mizutani, Y. Kawahito (Japan)
Doc.IV-1182-14
[28] Aluminum welding by combining a diode laser with a pulsed Nd:Yag laser
J. P. Bergmann, M. Bielenin (Germany)
Doc.IV-1185-14
10.
Resolution concerning publications in “Welding in the World”
11.
Intermediate meeting of Comm.IV, Comm.XII and SG212
12.
Miscellaneous
13.
Closure of meeting
6