1
Sehitoglu, 2/9/16, 1
Biography:
Huseyin Sehitoglu
John, Alice, and Sarah Nyquist Chair
ResearchWebsite: http://html.mechse.uiuc.edu/
Degrees
Field
Institution
Year
Awarded
B.Sc.
ME
The City University, London (First
Class Honors)
1979
M.S.
TAM
University of
Champaign
Illinois
at
Urbana-
1981
Ph.D.
TAM
University of
Champaign
Illinois
at
Urbana-
1983
Academic Positions:
Assistant Professor, Department of Mechanical and Industrial Engineering, UIUC, 1983-87
Associate Professor, Department of Mechanical and Industrial Engineering, UIUC, 1987-92
Director, Mechanics and Materials, National Science Foundation, Washington, DC, 1991-93
Visiting Professor, The Johns Hopkins University, Baltimore, MD, 1993-94
Professor, Department of Mechanical Science and Engineering, UIUC, 1992-date
Associate Head, Department of Mechanical and Industrial Engineering, UIUC, 1996-99
Grayce Wicall Gauthier Professor, Department of Mechanical and Industrial Engineering, UIUC,
2000-04
C. J. Gauthier Professor, Department of Mechanical Science and Engineering, UIUC, 2004-2008
John, Alice, and Sarah Nyquist Chair, Department of Mechanical Science and Engineering, UIUC,
2008- Present
Interim Head, Department of Mechanical and Industrial Engineering, UIUC, 2004-2005
Head, Department of Mechanical Science and Engineering, UIUC, 2005-2009
Director, Fracture Control Program*, UIUC, 1989-Present
*The Fracture Control Program, founded in 1971, is an education -research program focused on
fatigue of materials. Through Short Courses, Research Reports and Advisory Committee meetings it
addresses both basic and advanced topics including multiaxial fatigue, weld fatigue, and thermomechanical fatigue. Over the last twenty years, more than 2000 engineers, designers and scientists
have attended the Basic and Advanced Courses offered by the program. The Advisory Committee
presentations and the both courses can be downloaded from http://fcp.mechse.illinois.edu/ . The
current sponsors include Caterpillar, Honeywell, and ArvinMeritor.
Honors, Recognition, and Outstanding Achievements
Research
Nadai Medal, American Society of Mechanical Engineers, 2007
Marcus Grossman Award, American Society for Metals International, 1998
Fatigue Lecture, American Society of Testing Materials, 2009
Institution of Mechanical Engineers Award,- The City University, London, England, 1979
Sir John Dawrance Award, The City University, London, England, 1977
F. H. Russell Prize,+ The City University, London, England, 1979
Research Initiation Award, National Science Foundation, 1984
Best Presentation Award, American Society of Testing Materials, 2003
Director, Mechanics and Materials, National Science Foundation, Washington, DC, 1991-93
Beckman Award, The Center for Advanced Study, 1993
2
Sehitoglu, 2/9/16, 2
Grayce Wicall Gauthier Professor, Department of Mechanical and Industrial Engineering,
UIUC, 2000-2004
John, Alice, and Sarah Nyquist Chair, Department of Mechanical Science and Engineering,
UIUC, 2008Associate Editor, ASME, Pressure Vessel Technology, 1986-1989
Editor, Journal of Engineering Materials and Technology, 2002-2008
Fellow, the American Society of Mechanical Engineers, 2003
-Best Thesis Award
+First Place in Graduation
Research, Creative, and Other Scholarly Activities
Books Edited or Co-Edited, Original Editions
(1)
Sehitoglu, H., Co-Editor (with S. Y. Zamrik), “Thermal Stress,” American
Society of Mechanical Engineers Journal of Pressure Vessel and Piping
Technology, PVP-Vol. 123, 1987.
(2)
Sehitoglu, H., Editor, Thermo-mechanical Behavior of Materials, ASTM
STP 1186, 1993.
(3)
Sehitoglu, H. and Y. Chumlyakov, Guest Editors, “Shape Memory Alloys,”
ASME Journal of Engineering Materials and Technology, Jan. 1999.
(4)
Sehitoglu, H., Co-Editor (with H. J. Maier), “Thermo-Mechanical Behavior
of Materials”, ASTM STP 1371, 2000.
Chapters in Books
(1)
Sehitoglu, H., Thermal and Thermo-Mechanical Fatigue of Structural
Alloys, Handbook on Fatigue and Fracture, ASM, 19, 527-554, 1996.
(2)
Sehitoglu, H., "Thermo-mechanical Deformation of Engineering Alloys and
Components-Experiments and Modeling," NATO ASI - Mechanical
Behavior of Materials at High Temperature, C. Moura Branco, R. Ritchie,
and V. Sklenicka, eds., Kluwer, 349-379, 1996.
(3)
Sehitoglu, H., "The Effect of Particle Size on Thermo-Mechanical Fatigue
of AlSiC Metal Matrix Composites," Fatigue under Thermal and
Mechanical Loading: Mechanisms, Mechanics and Modeling, J. Bressers,
L. Rémy, M. Steen, and J. L. Vallés, eds., Kluwer, 371-380, 1996.
Articles in Journals
(1)
Sehitoglu, H. and D. L. McDiarmid, "The Effect of Load Stepdown on
Fatigue Crack Arrest and Retardation," International Journal of Fatigue,
55-60, 1980.
(2)
Sehitoglu, H., "Fatigue Life Prediction of Notched Members Based on
Local Strain and Elastic-Plastic Fracture Mechanics Concepts," Engineering
Fracture Mechanics, 18:3, 609-621, 1983.
3
Sehitoglu, 2/9/16, 3
(3)
Sehitoglu, H., "Characterization of Crack Closure," American Society for
Testing and Materials, STP 868, 361-380, 1985.
(4)
Sehitoglu, H., "Crack Opening and Closure in Fatigue," Engineering
Fracture Mechanics, 21:2, 329-339, 1985.
(5)
Sehitoglu, H., "Constraint Effect in Thermo-mechanical Fatigue," ASME
Journal of Engineering Materials and Technology, 107, 221-226, 1985.
(6)
Fec, M. C. and H. Sehitoglu, "Thermal-Mechanical Damage in Railroad
Wheels Due to Hot Spotting," Journal of Wear, 102, 31-42, 1985.
(7)
Sehitoglu, H., "Material Behavior under Thermal Loading," ASME Journal
of Pressure Vessel and Piping Technology, 108:1, 113-119, 1986.
(8)
Sehitoglu, H. and M. Karasek, "Observations of Material Behavior under
Isothermal and Thermo-mechanical Loading," ASME Journal of
Engineering Materials and Technology, 108:2, 192-198, 1986.
(9)
Slavik, D. and H. Sehitoglu, "Constitutive Models Suitable for Thermal
Loading," ASME Journal of Engineering Materials and Technology, 108:4,
303-312, 1986.
(10)
Lalor, P., H. Sehitoglu, and R. C. McClung, "Mechanics Aspects of Small
Crack Growth-The Role of Crack Closure," The Behavior of Short Fatigue
Cracks, EGF 1, 369-387, 1986.
(11)
Sehitoglu, H., "Crack Growth Studies under Selected Temperature-Strain
Histories," Engineering Fracture Mechanics, 26:4, 475-489, 1987.
(12)
McClung, R. C. and H. Sehitoglu, "Closure Behavior of Short Cracks under
High Strain Fatigue Histories," American Society for Testing and Materials,
STP 982, 279-299, 1988.
(13)
Lalor, P. and H. Sehitoglu, "Fatigue Crack Closure Outside a Small-Scale
Yielding Regime," American Society for Testing and Materials, STP 982,
342-360, 1988.
(14)
Karasek, M., H. Sehitoglu, and D. Slavik, "Deformation and Fatigue
Damage in 1070 Steel under Thermal Loading," American Society for
Testing and Materials, ASTM STP 942, 184-205, 1988.
(15)
Sehitoglu, H., D. F. Socie, and D. W. Worthem, "Small Crack Growth
Behavior during Biaxial Fatigue," American Society for Testing and
Materials, Critical Experiments and Fundamental Questions in Fatigue,
ASTM STP 924, 120-136, 1988.
(16)
Sehitoglu, H. and W. Sun, "The Significance of Crack Closure under High
Temperature Fatigue Crack Growth with Hold Periods," Engineering
Fracture Mechanics, 33:3, 371-388, 1989.
4
Sehitoglu, 2/9/16, 4
(17)
McClung, R. C. and H. Sehitoglu, "On the Finite Element Analysis of Crack
Closure, Part I: Basic Modeling Issues," Engineering Fracture Mechanics,
33:2, 237-252, 1989.
(18)
McClung, R. C, and H. Sehitoglu, "On the Finite Element Analysis of
Fatigue Crack Closure-Part II: Numerical Results," Engineering Fracture
Mechanics, 33:2, 253-272, 1989.
(19)
Sehitoglu, H., "Changes in State Variables at Elevated Temperatures,"
ASME Journal of Engineering Materials and Technology, 111, 192-203,
1989.
(20)
Neu, R. and H. Sehitoglu, "Thermomechanical Fatigue, Oxidation, and
Creep: Part I. Damage Mechanisms," Metallurgical Transactions, 20A,
1755-1767, 1989.
(21)
Neu, R. and H. Sehitoglu, "Thermomechanical Fatigue Oxidation and
Creep: Part II.
Life Prediction," Metallurgical Transactions, 20A,
1769-1783, 1989.
(22)
Sehitoglu, H. and D. A. Boismier, "Thermo-mechanical Fatigue of
Mar-M247: Part 1 -Experiments," ASME Journal of Engineering Materials
and Technology, 112, 68-80, 1990.
(23)
Boismier, D. A. and H. Sehitoglu, "Thermo-mechanical Fatigue of
Mar-M247 Part 2-Life Prediction," ASME Journal of Engineering Materials
and Technology, 112, 80-90, 1990.
(24)
Neu, R. and H. Sehitoglu, "Determination of Cone Bore Growth Due to
Microstructural Changes," ASME Journal of Tribology, 112, 433-441, 1990.
(25)
Neu, R. and H. Sehitoglu, "Transformation of Retained Austenite in
Carburized 4320 Steel," Metallurgical Transactions, 22A, 1491-1500, 1990.
(26)
Sehitoglu, H., "Thermo-Mechanical Fatigue Life Prediction Methods,"
ASTM STP 1122, 47-77, 1990.
(27)
McClung, R. C. and H. Sehitoglu, "Characterization of Fatigue Crack
Growth in Intermediate and Large Scale Yielding," ASME Journal of
Engineering Materials and Technology, 113, 15-22, 1991.
(28)
Karayaka, M. and H. Sehitoglu, "Thermomechanical Fatigue of ParticulateReinforced Aluminum 2xxx-T4," Metallurgical Transactions, 22:3,
697-708, 1991.
(29)
Sehitoglu, H. and W. Sun, "Modeling of Plane Strain Fatigue Crack
Closure," ASME Journal of Engineering Materials and Technology, 113,
31-41, 1991.
(30)
Sehitoglu, H. and W. Sun, "Mechanisms of Crack Closure in Plane Strain
and in Plane Stress," Fatigue under Biaxial and Multiaxial Loading, ESIS
10, 1-21, 1991.
5
Sehitoglu, 2/9/16, 5
(31)
Neu, R. and H. Sehitoglu, "Stress Induced Transformations in a Carburized
Steel - Experiments and Modeling," Acta Metallurgica, 40:9, 2257-2268,
1991.
(32)
Sun, W. and H. Sehitoglu, "Residual Stress Fields During Fatigue Crack
Growth," Fatigue and Fracture of Engineering Materials and Structures,
15:2, 115-128, 1992.
(33)
Karayaka, M. and H. Sehitoglu, "Thermomechanical Cyclic Deformation of
Metal Matrix Composites," ASTM STP, 1157, 101-120, 1992.
(34)
McClung, R. C. and H. Sehitoglu, "Closure and Growth of Fatigue Cracks
at Notches," ASME Journal of Engineering Materials and Technology,
114:1, 1-7, 1992.
(35)
Sehitoglu, H. and M. Karayaka, ''Prediction of Thermomechanical Fatigue
Lives in Metal Matrix Composites," Metallurgical Transactions, 23A,
2209-2038,1992.
(36)
Neu, R. and H. Sehitoglu, "Low-Temperature Creep of a Carburized Steel,"
Metallurgical Transactions, 23:7, 2619-2624, 1992.
(37)
Neu, R. and H. Sehitoglu, "Thermal-Induced Transformations of Retained
Austenite in the Simulated Case of a Carburized Steel," ASME Journal of
Engineering Materials and Technology, 115, 83-88, 1993.
(38)
Kadioglu, Y. and H. Sehitoglu, "Modeling of Thermomechanical Fatigue
Damage in Coated Alloys," ASTM STP, 1186, 17-34, 1993.
(39)
Hour, K. Y. and H. Sehitoglu, "Damage Development in a Short Fiber
Reinforced Composite," Journal of Composites, 27:8, 782-805, 1993.
(40)
Karayaka, M. and H. Sehitoglu, "Thermomechanical Deformation Modeling
of A12xxx-T4/SiC.p Composites," Acta Metallurgica, 41:1, 175-189, 1993.
(41)
Neu, R. and H. Sehitoglu, "Simulation of Cone Bore Growth in Bearings
with a Three-Ring Model," ASME Journal of Applied Mechanics,
61:3,589-595, 1994.
(42)
Neu, R. and H. Sehitoglu, "Measurement of Transformation Strain During
Fatigue Testing," ASTM STP, 1231, 577-593, 1994.
(43)
Jiang, R. and H. Sehitoglu, "An Analytical Approach to Elastic-Plastic
Stress Analysis of Rolling Contact," ASME Journal of Tribology, 116:3,
1994.
(44)
Jiang, R. and H. Sehitoglu, "Cyclic Ratchetting of 1070 Steel Under
Multiaxial Stress States," International Journal of Plasticity, 10:5, 579-608,
1994.
(45)
Jiang, R. and H. Sehitoglu, "Multiaxial Cyclic Ratchetting Under Multiple
Step Loading," International Journal of Plasticity, 10:7, 1994.
6
Sehitoglu, 2/9/16, 6
(46)
Jiang, Y. and H. Sehitoglu, "Comments on MROZ Multiple Surface Type
Plasticity Models," International Journal of Solids and Structures, 33:7,
1053-1068, 1996.
(47)
Kadioglu, Y. and H. Sehitoglu, "Thermomechanical and Isothermal Fatigue
Behavior of Bare and Coated Superalloys," ASME Journal of Engineering
Materials and Technology, 117, 94-102, 1996.
(48)
Jiang, Y. and H. Sehitoglu, "Modeling of Cyclic Ratchetting Plasticity: Part
1-Development of Constitutive Relations," ASME Journal of Applied
Mechanics, 63, 720-725, 1996.
(49)
Jiang, Y. and H. Sehitoglu, "Modeling of Cyclic Ratchetting Plasticity: Part
2-Comparison of Model Simulations with Experiments," ASME Journal of
Applied Mechanics, 63, 726-733, 1996.
(50)
Gall, K., H. Sehitoglu, and Y. Kadioglu, "FEM Study of Fatigue Crack
Closure Under Double Slip," Acta Metallurgica, 44:10, 3955-3965, 1996.
(51)
Karayaka, M. and H. Sehitoglu, "Failure Behavior of Unidirectional
AS4/3501-6 Carbon Epoxy Laminates," Journal of Composite Materials,
30, 1150-1176, 1996.
(52)
Jiang, Y., and H. Sehitoglu, "Rolling Contact Stress Analysis with the
Application of a New Plasticity Model,'' Wear, 191, 35-44, 1996.
(53)
Jacobus, K., H. Sehitoglu, and M. Balzer, "Effect of Stress State on the
Stress-Induced Martensitic Transformation in Polycrystalline Ni-Ti Alloy,"
Metallurgical Transactions, 27:10, 3066-3073, 1996.
(54)
Sehitoglu, H., K. Gall, and A. M. Garcia, "Recent Advances in Fatigue
Crack Growth Modeling," International Journal of Fracture, 80:2-3,
165-192, 1996.
(55)
Gall, K., H. Sehitoglu, and Y. Kadioglu, "Plastic Zones and Fatigue Crack
Closure Under Plane-Strain Double Slip," Metallurgical Transactions,
27:11, 3491-3502, 1996.
(56)
Balzer, M. and H. Sehitoglu, "A New Apparatus for Studying Mechanical
Behavior Under Pressure, " Experimental Mechanics, 37:1, 87-95, March
1997.
(57)
Gall, K., H. Sehitoglu, and Y. Kadioglu, "A Methodology for Predicting
Variability in Microstructurally Short Fatigue Crack Growth Rates," ASME
Journal of Engineering Materials Technology, 119, 171-179, April 1997.
(58)
Garcia, A. M. and H. Sehitoglu, "Contact of Crack Surfaces During Fatigue,
Part I - Formulation of the Model," Metallurgical Transactions, 28A, 22632275, 1997.
7
Sehitoglu, 2/9/16, 7
(59)
Sehitoglu, H. and A. M. Garcia, "Contact of Crack Surfaces During Fatigue,
Part 2 - Simulations," Metallurgical Transactions, 28A, 2277-2289, 1997.
(60)
Mazumder, J., H. Cheng, T. Yamomoto, T. Duffey, H. Sehitoglu, M. H.
Jilavi, and W. M. Knver, "Nanocrystalline NbAL3 Powders and NbAL3/AL
Multilayers by Laser Ablation Deposition," Nanostructured Materials, 9,
1-8, 1997.
(61)
Karaman, I., H. Sehitoglu, H. J. Maier, and M. Balzer, "Stress State Effects
on the Stress-Induced Martensitic Transformation of Carburized 4320
Steels," Metallurgical Transactions, 29A, 427-437, 1998.
(62)
Gall, K., H. Sehitoglu, and H. J. Maier, "Stress Induced Martensitic Phase
Transformation in Polycrystalline CuZnAl Shape Memory Alloys in
Different Stress States," Metallurgical Transactions, 29:3, 765-773, 1998.
(63)
Karaman, I., H. Sehitoglu, K. Gall, and Y. Chumlyakov, “On the
Deformation Mechanisms in Single Crystal Hadfield Manganese Steels,”
Scripta Materialia, 38:6, 1009-1015, 1998.
(64)
Gall, K., H. Sehitoglu, Y. I. Chumlyakov, Y. L. Zuev, and I. Karaman, "The
Role of Coherent Precipitates in Martensitic Transformations in Single
Crystal and Polycrystalline Ti-%0.8% Ni," Scripta Materialia, 39:6,
699-705, 1998.
(65)
Chumlyakov, Y., H. Sehitoglu, I. V. Kireeva, E. I. Litvirova, E. G.
Zakharova, and I. S. Kalashnikov, "Plastic Deformation in Single Crystals
of Hadfield Steel," Doklady Physics, 43:7, 415-418, 1998.
(66)
Sehitoglu, H. and A. M. Garcia, "Contact of Nonflat Crack Surfaces During
Fatigue," American Society of Testing Materials, STP 1343, 367-378, 1999.
(67)
Gall, K. and H. Sehitoglu, "The Role of Texture in Tension-Compression
Asymmetry in Polycrystalline NiTi," International Journal of Plasticity, 15,
69-92, 1999.
(68)
Gall, K., H. Sehitoglu, Y. I. Chumlyakov, I. V. Kireeva, and H. J. Maier,
"The Influence on Critical Transformation Stress Levels and Martensite
Start Temperatures in NiTi: Part I–Aged Microstructure and MicroMechanical Modeling," Journal of Engineering Materials and Technology,
121:1, 19-27, 1999.
(69)
Gall, K., H. Sehitoglu, Y. I. Chumlyakov, I. V. Kireeva, and H. J. Maier,
"The Influence of Aging on Critical Transformation Stress Levels and
Martensite Start Temperatures in NiTi: Part II–Discussion of Experimental
Results," Journal of Engineering Materials and Technology, 121:1, 28-37,
1999.
(70)
Gall, K., H. Sehitoglu, Y. Chumlyakov, and I. Kireeva, "Pseudoelastic
Cyclic Stress-Strain Response of Over-aged Single Crystal Ti-50.8%Ni,"
Scripta Materialia, 40:1, 7-12, 1999.
8
Sehitoglu, 2/9/16, 8
(71)
Smith, T. J., H. J. Maier, H. Sehitoglu, E. Fleury, and J. A. Allison,
"Modeling High Temperature Stress-Strain Behavior of Cast Aluminum
Alloys," Metallurgical and Materials Transactions, 30A, 133-146, 1999.
(72)
Jiang, Y. and H. Sehitoglu, "A Model for Rolling Contact Failure," Wear,
224, 38-49, 1999.
(73)
Gall, K., H. Sehitoglu, Y. Chumlyakov, and I. Kireeva,
"Tension-Compression Asymmetry of the Stress-Strain Response of Aged
Single Crystal and Polycrystalline NiTi," Acta Materialia, 47:4, 1203-1217,
1999.
(74)
Saif, M. T. A., E. Alaca, and H. Sehitoglu, "Analytical Modeling of
Electrostatic Membrane Actuator for Micro Pumps," Journal of MEMS,
8:3, 335-345, 1999.
(75)
Litvinova, E. I., I. V. Kireeva, E. G. Zaharova, N. V. Luzginova, Y. I.
Chumlyakov, H. Sehitoglu, and I. Karaman, "Twinning in Hadfield Steel
Single Crystals," Physical Mesomechanics, 2:1-2, 107-112, 1999.
(76)
Chumlyakov, Y. I., I. V. Kireeva, H. Sehitoglu, E. I. Litvinova, E. G.
Zaharova, and N. V. Luzginova, "High-Strength Single Crystals of
Austenitic Stainless Steels with Nitrogen Content: Mechanisms of
Deformation and Fracture," Materials Science Forum, 318, 395-400, 1999.
(77)
Gall, K., T. J. Lim, D. McDowell, H. Sehitoglu, and Y. I. Chumlyakov,
"The Role of Intergranular Constraint on the Stress-Induced Martensitic
Transformation in Textured Polycrystalline NiTi," International Journal of
Plasticity, 16, 1189-1214, 2000.
(78)
Chumlyakov, Y. I., I. V. Kireeva, E. I. Litvinova, E. G. Zakharova, N. V.
Luzginova, S. P. Ephimenko, H. Sehitoglu, and I. Karaman, "Twinning in
Gadfield Steel Single Crystals," Doklady Physics, 45:3, 101-104, 2000.
(79)
Sehitoglu, H., X. Qing, T. J. Smith, H. J. Maier, and J. A. Allison,
"Stress-Strain Response of Aluminum 319-T6 Under Thermomechanical
Loading," Metallurgical and Materials Transactions, 31A:1, 139-152,
2000.
(80)
Andrews, S. D., H. Sehitoglu, and I. Karaman, "Constriction Energy in the
Presence of a Solute Field," Journal of Applied Physics, 87:5, 2194-2203,
2000.
(81)
Sehitoglu, H., T. Smith, and H. J. Maier, "Thermo-mechanical Deformation
of A1 319-T7B with Small Secondary Dendrite Arm Spacing," ASTM STP
1371, 53-68, 2000.
(82)
Andrews, S. and H. Sehitoglu, "A Computer Model for Fatigue Crack
Growth from Rough Surfaces," International Journal of Fatigue, 22:7,
619-630, 2000.
9
Sehitoglu, 2/9/16, 9
(83)
Karaman, I., K. Gall, H. Sehitoglu, and Y. Chumlyakov, "Deformation of
Single Crystal Hadfield Steel by Twinning and Slip," Acta Materialia, 48,
1345-1359, 2000.
(84)
Karaman, I., H. Sehitoglu, A. J. Beaudoin, Y. Chumlyakov, H. J. Maier, and
C. N. Tomé, "Modeling the Deformation Behavior of Hadfield Steel Single
and Polycrystals due to Twinning and Slip," Acta Materialia, 48, 20312047, 2000.
(85)
Sehitoglu, H., I. Karaman, R. Anderson, X. Zhang, K. Gall, H. J. Maier, and
Y. Chumlyakov, "Compressive Response of NiTi Single Crystals," Acta
Materialia, 48, 3311-3326, 2000.
(86)
Chumlyakov, Y., I. Kireeva, E. Litvinova, E. G. Zakharova, N. V.
Luzginova, H. Sehitoglu, and I. Karaman, "Strain Hardening in Single
Crystals of Hadfield Steel," Physics of Metals and Metallography, 90,
Suppl. 1, S1-S17, 2000.
(87)
Gall, K., H. Sehitoglu, R. Anderson, I. Karaman, Y. Chumlyakov, and I. V.
Kireeva, "On the Mechanical Behavior of Single Crystal NiTi Shape
Memory Alloys and Related Polycrystalline Phenomenon," Materials
Science and Engineering, A317, 85-92, 2001.
(88)
Sehitoglu, H., R. Anderson, I. Karaman, K. Gall, and Y. Chumlyakov,
"Cyclic Deformation Behavior of Single Crystal NiTi," Materials Science
and Engineering, A314, 67-74, 2001.
(89)
Sehitoglu, H., I. Karaman, X. Y. Zhang, Y. Chumlyakov, and H. J. Maier,
"Deformation of FeNiCoTi Shape Memory Single Crystals," Scripta
Materialia, 44, 779-784, 2001.
(90)
Sehitoglu, H., I. Karaman, X. Zhang, H. Kim, Y. I. Chumlyakov, H. J.
Maier, and I. V. Kireeva, "Deformation of NiTiCu Shape Memory Single
Crystals in Compression," Metallurgical and Materials Transactions,
32A:3, 477-490, 2001.
(91)
Karaman, I., H. Sehitoglu, Y. I. Chumlyakov, H. J. Maier, and I. V.
Kireeva, "The Effect of Twinning and Slip on the Bauschinger Effect on
Hadfield Steel Single Crystals," Metallurgical and Materials Transactions,
32A:3, 695-706, 2001.
(92)
Karaman, I., H. Sehitoglu, Y. I. Chumlyakov, H. J. Maier, and I. V.
Kireeva, "Extrinsic Stacking Faults and Twinning in Hadfield Manganese
Steel Single Crystals," Scripta Materialia, 44, 337-343, 2001.
(93)
Sehitoglu, H., I. Karaman, X. Zhang, A. Viswanath, Y. Chumlyakov, and H.
J. Maier, "Strain-temperature Behavior of NiTiCu Shape Memory Single
Crystals," Acta Materialia, 49, 3621-3634, 2001.
(94)
Gall, K., K. Juntunen, H. J. Maier, H. Sehitoglu, and Y. I. Chumlyakov,
"Instrumented Micro-Indentation of NiTi Shape Memory Alloys," Acta
Materialia, 49, 3205-3217, 2001.
10
Sehitoglu, 2/9/16, 10
(95)
Sehitoglu, H., J. Jun, X. Zhang, I. Karaman, Y. Chumlyakov, H. J. Maier,
and K. Gall, "Shape Memory and Pseudoelastic Behavior of 51.5% Ni-Ti
Single Crystals in Solutionized and Overaged State," Acta Materialia, 49,
3609-3620, 2001.
(96)
Gall, K., N. Yang, H. Sehitoglu, and Y. Chumlyakov, "Fracture of
Precipitated Single Crystal and Polycrystalline NiTi Shape Memory
Alloys," International Journal of Fracture, 109, 189-207, 2001.
(97)
Karaman, I., H. Sehitoglu, H. J. Maier, and Y. I. Chumlyakov, "'Competing
Mechanisms and Modeling of Deformation in Austenitic Stainless Steel
Single Crystals With and Without Nitrogen," Acta Materialia, 49:19,
3919-3933, 2001.
(98)
Chumlyakov, Y. I., S. P. Epinenko, I. V. Kireeva, E. Y. Panchenko, H.
Sehitoglu, K. Gall, and L. H. Yahia, "Effects of Shape Memory and
Superelasticity in Aged TiNi Single Crystals," Doklady Physics, 46:12, 849852, 2001.
(99)
Jiang, Y., B. Xu, and H. Sehitoglu, "Three-dimensional Elastic-plastic
Stress Analysis of Rolling Contact," Journal of Tribology, 124, 699-708,
2002
(100)
Alaca, B. E., M. T. A. Saif, and H. Sehitoglu, "On the Interface Debond at
the Edge of a Thin Film on a Thick Substrate," Acta Materialia, 50, 11971209, 2002.
(101)
Gall, K., M. Dunn, Y. Liu, P. Labossiere, H. Sehitoglu, and Y. I.
Chumlyakov, "Micro and Macro Deformation of Single Crystal NiTi,"
Journal of Engineering Materials and Technology A, 124, 238-245, 2002.
(102)
Chumlyakov, Y. I., E. Yu Panchenko, I.V. Kireeva, S. P. Efimenko, V. B.
Aksenov, and H. Sehitoglu, “Dependence of Shape Memory Effect and
Superelasticity on the Number of Variants of Dispersed Particles in
Titanium-Nickel Single Crystals,” Doklady Physics, 47:7, 510-514, 2002.
(103)
Zakharova, E. G., I. V. Kireeva, Yu I. Chumlyakov, S. P. Efimenko, H.
Sehitoglu, and I. Karaman, “Deformation Mechanisms and Strain
Hardening of Hadfield Steel Single Crystals Alloyed with Aluminum,”
Doklady Physics, 47:7, 515-517, 2002.
(104)
Karaman, I., H. Sehitoglu, Y. I. Chumlyakov, and H. J. Maier,
“Deformation of Low Stacking Fault Energy Austenitic Steels,” Journal of
Metals, 54:7, 31-37, 2002.
(105)
Alaca, B., J. C. Selby, M. T. A. Saif, and H. Sehitoglu, "Biaxial Testing of
Nanosccale Films on Compliant Substrates - Fatigue and Fracture," Review
of Scientific Instruments, 73:8, 2963-2970, 2002.
(106)
Sehitoglu, H., X. Y. Zhang, T. Kotil, D. Canadinc, Y. Chumlyakov, and H.
J. Maier, "Shape Memory Behavior of FeNiCoTi Single and Polycrystals,"
Metallurgical and Materials Transactions, 33A, 3661-3672, 2002.
11
Sehitoglu, 2/9/16, 11
(107)
Chumlyakov, Y., I. Kireeva, E. Zakharova, N. Luzginova, H. Sehitoglu, and
I. Karaman, “Strain Hardening and Fracture of Austenitic Steel Single
Crystals with High Concentration of Interstitial Atoms,” Russian Physics
Journal, 45, 3, 2002.
(108)
Su, X., M. Zubeck, J. Lasecki, H. Sehitoglu, C. Engler, C. Tang, and J.
Allison, "Thermo-mechanical Analysis of Cast Aluminum Engine
Components," ASTM STP, 1428, 2003.
(109)
Newman, M, B. Robinson, H. Sehitoglu, and J. Dantzig, “Deformation
Residual Stress and Constitutive Relations for Quenched W319
Aluminum,” Metallurgical Transactions, 34A:7, 1483-1491, 2003.
(110)
Canadinc, D., I. Karaman, H. Sehitoglu, Y. Chumlyakov, and H. J. Maier,
"The Role of Nitrogen on the Deformation Response of Hadfield Steel
Single Crystals," Metallurgical and Materials Transactions, 34A:9, 18211831, 2003.
(111)
Engler-Pinto Jr., C. C., H. Sehitoglu, and H. J. Maier, "Cyclic Behavior of
AL319-T7B Under Isothermal and Nonisothermal Conditions," ASTM STP,
1428, 45-64, 2003.
(112)
Sehitoglu, H., D. Canadinc, R. Hamilton, X. Y. Zhang, K. Gall, I. Karaman,
Y. Chumlyakov, and H. J. Maier, "Detwinning in NiTi Alloys,"
Metallurgical and Materials Transactions, 34A:1, 5-13, 2003.
(113)
Panchenko, E. Y., I. V. Kireeva, Y. I. Chumlyakov, V. B. Aksenov, S. P.
Efimenko, I. Karaman, and H. Sehitoglu, “Features of Thermoelastic
Martenstic Transformations in [001] Titanium-Nickel Single Crystals,”
Doklady Physics, 48, 34-37, 2003.
(114)
Kotil T., H. Sehitoglu, H. J. Maier, and Y. I. Chumlyakov, “Transformation
and Detwinning Induced Electrical Resistance Variations in NiTiCu,”
Materials and Engineering, A359, 280-289, 2003.
(115)
Chumlyakov, Y., I. V. Kireeva, E. Y. Panchenko, V. B. Aksenov, V. A.
Kirillov, A. V. Ovsyannikov, E. G. Zakharova, and H. Sehitoglu, “Shape
Memory Effect and Superelasticity in Ti-Ni and Fe-Ni-Co-Ti Single
Crystals,” Russian Physics Journal, 46:8, 811-823, 2003.
(116)
Chumlyakov, Y., E. Y. Panchenko, I. V. Kireeva, D. A. Shaporov, V. B.
Aksenov, H. Sehitoglu, I. Karaman, K. Gall, and H. Maier, “The Shape
Memory Effect and Superelasticity in Nickel-Titanium Single Crystals
Aged Under Applied Stress,” J. de Physique IV, 112, 799-802, 2003.
(117)
Sehitoglu, H., R. Hamilton, H. J. Maier, and Y. Chumlyakov, “Hysteresis in
Ni-Ti Alloys,” J. de Physique IV, 115, 3-10, 2003.
(118)
Hamilton, R. F., H. Sehitoglu, Y. Chumlyakov, and H. J. Maier, “Stress
Dependence of the Hysteresis in Single Crystal Ni-Ti Alloys,” Acta
Materialia, 52, 3383-3402, 2004.
12
Sehitoglu, 2/9/16, 12
(119)
Zhang, X. and H. Sehitoglu, “Crystallography of the B2→R→B19’ Phase
Transformations of NiTi,” Materials Science and Engineering., A374, 292302, 2004.
(120)
Efstathiou, C., H. Sehitoglu, A. J. Wagoner Johnson, R. F. Hamilton, H. J.
Maier, and Y. Chumlyakov, “Large Reduction in Critical Stress in Co-NiAL upon Repeated Transformation,” Scripta Materialia, 51, 979-985, 2004.
(121)
Chumlyakov, Y I.., I. V. Kireeva, E. Y. Panchenko, E. G. Zakharova, V. A.
Kirillov, S. P. Efimenko, and H. Sehitoglu, “Shape Memory Effects in
FeNiCoTi Single Crystals Undergoing Gamma to Alpha Thermoelastic
Martensitic Transformations,” Doklady Physics, 49:1, 47-59, 2004.
(122)
Alaca, E., Sehitoglu, H. and T. Saif, “Guided Self-assembly of Metallic
Nanowires and Channels,” Appl. Phys. Letters, 84:23, 4669-4671, 2004.
(123)
Kibey, S., H. Sehitoglu, and D. Pecknold, “Modeling of Fatigue Crack
Closure in Inclined and Deflected Cracks,” Int. J. Fracture, 129:3, 279-308,
2004.
(124)
Chumlyakov, Y. I., E. Y. Panchenko, V. B. Aksenor, I. V. Kireeva, M. P.
Kulesa, I. Karaman, and H. Sehitoglu, “The Shape Memory Effect and
Superelasticity in Ti-Ni Single Crystals with One Variant Dispersed
Particles,” J. de Physique IV, 115, 21-28, 2004.
(125)
Karaman, I., E. G. Zakharova, I. V. Kireeva, Y. I. Chumlyakov, A.
Shulmina, and H. Sehitoglu, “The Effect of Aluminum on Strength and
Deformation Mechanisms in Hadfield Steel Single Crystals,” J. de Physique
IV, 115, 243-250, 2004.
(126)
Sehitoglu, H., T. Foglesong, and H. J. Maier, “Precipitate Effects on the
Mechanical Behavior of Aluminum Copper Alloys – Part I: Experiments,”
Metal. and Materials Trans., 36A, 749-761, 2005.
(127) Sehitoglu, H. T. Foglesong, and H. J. Maier, “Precipitate Effects on the
Mechanical Behavior of Aluminum Copper Alloys – Part II: Modeling,”
Metal and Materials Trans., 36A, 763-770, 2005.
(128)
Canadinc, D., H. Sehitoglu, H. J. Maier, and Y. Chumlyakov, “Strain
Hardening Behavior of Aluminum Alloyed Hadfield Steel Single Crystals,”
Acta Materialia, 53, 1831-1842, 2005.
(129)
Sehitoglu, H., C. Efstathiou, H. J. Maier, and Y. Chumlyakov,
“Magnetization, Shape Memory and Hysteresis Behavior of Single and
Polycrystalline FeNiCoTi,” J. Magnetism and Magnetic Materials, 292, 8999, 2005.
(130)
Wagoner Johnson, A., R. F. Hamilton, H. Sehitoglu, G. Baillas, H. J. Maier,
Y. I. Chumlyakov, and H. S. Woo, “Analysis of Multistep Transformations
in Single Crystal NiTi,” Met. and Materials Trans., 36A:4, 919-928, 2005.
13
Sehitoglu, 2/9/16, 13
(131) Hamilton, R. F., H. Sehitoglu., C. Efstathiou, H. J. Maier, Y. Chumlyakov,
and X. Y. Zhang, “Transformation of Co-Ni-Al Single Crystals in Tension,”
Scripta Materialia, 53:1, 131-136, 2005.
(132)
Sehitoglu, H., C. Efstathiou, H. J. Maier, and Y. Chumlyakov, “Hysteresis
and Deformation Mechanisms of Transforming FeNiCoTi,” Mechanics of
Materials, 38, 538-550, 2006.
(133)
Hamilton, R. F., C. Efstathiou, H. Sehitoglu, and Y. Chumlyakov, “Thermal
and Stress-Induced Martensitic Transformations in NiFeGa Single Crystals
under Tension and Compression,” Scripta Materialia, 54:3, 465-469, 2006.
(134)
Hamilton, R. F., H. Sehitoglu, C. Efstathiou, H. J. Maier, and Y.
Chumlyakov, “Pseudoelasticity in Co-Ni-AL Single and Polycrystals,”
Acta. Materialia, 54, 587-599, 2006.
(135)
Kibey, S., J. B. Liu, M. J. Curtis, D. D. Johnson, and H. Sehitoglu, “Effect
of Nitrogen on Generalized Staking Fault Energy and Stacking Fault Widths
in High Nitrogen Steels, “Acta Materialia, 54, 2991-3001, 2006.
(136)
Callaway, J. D., H. Sehitoglu, R. F. Hamilton, K. Aslantas, N. Miller, H. J.
Maier, and Y. Chumlyakov, “Magnetic Shape Memory in Ni2MnGa as
Influenced by the Deformation Response” Applied Physics Letters, 89:22,
221905, 2006.
(137)
Kibey, S., J. B. Liu, D. D. Johnson, and H. Sehitoglu, “Generalized Planar
Fault Energies and Twinning in Cu-AL Alloys,” Applied Physics Letters,
89:19, 191911, 2006.
(138) Kuznetsov, E. Y., A. V. Tverdokhlebova, Y. I. Chumlyakov, I. Karaman,
and H. Sehitoglu, “Thermoelastic Martensitic Transformations, Shape
Memory Effect, and Superelasticity in Ni54 Fe19 Ga27 Ferromagnetic
Single Crystals,” Panchenko, Bulletin of the Russian Academy of Sciences:
Physics, 70:9, 1549-1553, 2006.
(139)
Callaway, J. D., R. F. Hamilton, H. Sehitoglu, N. Miller, H. J. Maier, and Y.
Chumlyakov, “Shape Memory and Martensitic Deformation Response of
Ni2Mn Ga,” Smart Materials and Structures, 16, S108-S114, 2007.
(140)
Canadinc, D., H. Sehitoglu, H. J. Maier, D. Niklasch, and Y. Chumlyakov,
“Orientation Evolution in Hadfield Steel Single Crystals under Combined
Slip and Twinning,” International Journal Solids and Structures, 44, 34-50,
2007.
(141)
Canadinc, D., H. Sehitoglu, and H. J. Maier, “The Role of Dense
Dislocation Walls on the Deformation Response of Aluminum Alloyed
Hadfield Steel Polycrystals,” Materials Science and Engineering, 454, 662666, 2007.
(142)
Astafurova, E. G., I. V. Kireeva, Y. I. Chumlyakov, H. J. Maier, and H.
Sehitoglu, “The Influence of Orientation and Aluminum Content on the
Deformation Mechanisms of Hadfield Steel Single Crystals,” International
Journal of Materials Research, 98:2, 144-149, 2007.
14
Sehitoglu, 2/9/16, 14
(143)
Chumlyakov, Y., E. Panchenko, I. Kireeva, I. Karaman, H. Sehitoglu, H. J.
Maier, A. Tverdokhlebova and A. Ovsyannikov, “Orientation Dependence
and Tension/Compression Asymmetry of Shape Memory Effect and
Superelasticity in Ferromagnetic Co 40 Ni 33 Al 27, Co 49 Ni 21 Ga 30 and
Ni 54 Fe 19 Ga 27 Single Crystals,” Materials Science and Engineering:
A, in Press, 2007.
(144)
Hamilton, R. F., H. Sehitoglu, C. Efstathiou and H. J. Maier, “Intermartensitic transitions in Ni-Fe-Ga single crystals,” Acta Materialia,
Volume 55, Issue 14, Pages 4867-4876, August 2007.
(145)
Canadinc, D., H. Sehitoglu, H. J. Maier, and P. Kurath, ”On the
Incorporation of Length Scales Associated with Pearlitic and Bainitic
Microstructures into a Visco-Plastic Self-Consistent Model,” Materials
Science and Engineering: A, In Press, Available online 26 August 2007.
(146)
Hamilton, R. F., H. Sehitoglu, C. Efstathiou, and H .J. Maier, “Mechanical
Response of NiFeGa Alloys Containing Second-phase Particles,“ Scripta
Materialia, 57:6, 497-499, September 2007.
(147)
Efstathiou, C., H. Sehitoglu, P. Kurath, S. Foletti, and P. Davoli, “Fatigue
Response of NiFeGa Single Crystals,” Scripta Materialia, 57:5, 409412, September 2007.
(148)
Kibey, S., J. B. Liu, D.D. Johnson, and H. Sehitoglu, “Predicting Twinning
Stress in FCC Metals: Linking Twin-energy Pathways to Twin Nucleation,”
Acta Materialia, 55, 6843-6851, 2007.
(149)
Kibey, S., J. B. Liu, D. D. Johnson, and H. Sehitoglu, "Energy Pathways
and Directionality in Deformation Twinning,” Applied Physics Letters, 91,
181916, 2007.
(150)
Canadinc, D., H. Sehitoglu, and K. Verzal, “Analysis of Surface Crack
Growth under Rolling Contact Fatigue,” accepted to the International
Journal of Fatigue, 2008.
(151)
Hamilton, R. F., H. Sehitoglu, K. Aslantas, C. Efstathiou, and H. J. Maier,
“Inter-martensite Strain Evolution in NiMnGa Single Crystals” accepted for
publication to Acta Materialia, 2008.
(152)
C. Efstathiou, H. Sehitoglu, J. Carroll, J. Lambros, H. J. Maier.Full-Field
Strain Evolution during Intermartensitic Transformations in Single Crystal
NiFeGa. 56,15, 3791-3799, Acta Materialia, 2008
(153)
Y. Chumlyakov, E. Panchenko, I. Kireeva, I. Karaman, H. Sehitoglu, H.J.
Maier, A. Tverdokhlebova, A. Ovsyannikov, Orientation dependence and
tension/compression asymmetry of shape memory effect and superelasticity
in ferromagnetic Co40Ni33Al27, Co49Ni21Ga30 and Ni54Fe19Ga27 single
crystals.,481, 95-100, Materials Science and Engineering A, 2008
(154) D.Canadinc, C. Efstahiou, H. Sehitoglu, On the Negative Strain Rate
Sensitivity of Hadfield Steel, Scripta Materialia,59,10, 1103-1106,
2008
15
(155)
Sehitoglu, 2/9/16, 15
C. Efstathiou, H. Sehitoglu, Local Transformation Strain Measurements in
Precipitated NiTi Single Crystals, Scripta Materialia, 59, 1263-1266, 2008
(156) E.Y.Panchenko, Y.I.Chumlyakov,I.V.Kireeva,A.V. Ovsyannikov, H.
Sehitoglu, I.Karaman, H.J.Maier, Effect of Disperse Ti3Ni4 Particles on the
Martensitic Transformations in Titanium Nickelide Single Crystals, Physics
Metals and Metallography, 106,6,577-589,2008
(157) C. Efstathiou, H. Sehitoglu, Strengthening Hadfield steel welds by nitrogen
alloying, Materials Science and Engineering: A, 506,1-2,174-179, 2009
(158)
S. Kibey, H. Sehitoglu, D.D. Johnson, Energy landscape for martensitic
phase transformation in shape memory NiTi, Acta Materialia,57,5, 16241629, 2009
(159)
Carroll, J, C. Efstathiou, J. Lambros, and H. Sehitoglu, R. Haber, S.
Spottswood, and R. Chona, “Investigation of Fatigue Crack Closure using
Mulitscale Image Correlation Experiments,” Engineering Fracture
Mechanics,76,2384-2398, 2009
(160)
Kibey, S., L. L. Wang, J. B. Liu, H. T. Johnson, H. Sehitoglu, and D. D.
Johnson,
“Quantitative Prediction of Twinning Stresses in FCC
Alloys: Applications to Cu- AL,” Physical Review, 79, 214202, 2009
(161)
C. Efstathiou, H. Sehitoglu, J. Lambros, Multiscale strain measurements of
plastically deforming polycrystalline titanium: Role of deformation
hetererogeneities, International J. Plasticity, 26,1, 93-106, 2010
(162)
C. Efstathiou, H. Sehitoglu, Strain hardening and heterogeneous
deformation during twinning in Hadfield steel, Acta Materialia, 58,5,14791488, 2010
(163)
Sangid, M.D., H. Sehitoglu, H. J. Maier, and T. Niendorf, "Grain Boundary
Characterization and Energetics of Superalloys," Materials Science and
Engineering: A, 527, 26, 7115-7125, 2010.
(164)
Carroll J., W. Abuzaid, J. Lambros, H. Sehitoglu, "An Experimental
Methodology to Relate Local Strain to Microstructural Texture," Rev. Sci.
Instrum. 81, 083703, 2010
(165)
Sangid, M.D., H.J.Maier, and H. Sehitoglu, "The Role of Grain Boundaries
on Fatigue Crack Initiation - An Energy Approach," to appear in I. J.
Plasticity, 2011.
(166)
Sangid, M. D., T. Ezaz, H. Sehitoglu, and I. M. Robertson, "Energy of Slip
Transmission and Nucleation at Grain Boundaries," Acta Materialia,59,1,
283-296, 2011.
(167)
Sangid, M.D., H. J. Maier, and H. Sehitoglu, "Physically-based Fatigue
Model for Prediction of Crack Initiation from Persistent Slip Bands in
Polycrystals," Acta Materialia, 59,1,328-341, 2011.
16
Sehitoglu, 2/9/16, 16
(168)
Dilibal, S., H. Sehitoglu, R. Hamilton, H.J.Maier, Y. Chumlyakov,"On the
Volume Change in Co-Ni-Al during Pseudoelasticity", Materials Science
and Engineering A, 528, 6, 2875-2881, 2011.
(169)
Sangid, M.D., H. Sehitoglu, H.J. Maier, An energy-based microstructure
model to account for fatigue scatter in polycrystals", J. Mechanics and
Physics of Solids, 59,3, 595-609, 2011.
(170)
Ezaz,T., M.D. Sangid, H. Sehitoglu, Energy Barriers Associated with SlipTwin Interactions, Philosophical Magazine A, 91, 10, 1, 1464–1488, 2011.
(171)
Hamilton, R.F., S.Dilibal, H. Sehitoglu, H.J.Maier, Underlying Mechanism
of Dual Hysteresisin NiMnGa single crystals, Materials Science and
Engineering: A, 528, 3, 1877-1881, 2011.
(172)
Ezaz T., H.Sehitoglu, Type II Detwinning in NiTi, Applied Physics Letters,
98,14, 2011.
(173)
Ezaz,T., and H. Sehitoglu, "Coupled Shear and Shuffle Modes During Twin
Growth in B2-NiTi," Applied Physics Letters, 98, 241906, 2011.
(174)
Ezaz, T., H. Sehitoglu, and H. J. Maier, "Energetics of Twinning in Martensitic
NiTi," Acta Materialia, 59, 15893-5904, 2011.
(175)
Sangid, M., G. J. Pataky, H. Sehitoglu, R. G. Rateick, T. Niendorf, and H. J.
Maier, "Superior Fatigue Crack Growth Resistance, Irreversibility, and Fatigue
Crack Growth“Microstructure Relationship of Nanocrystalline Alloys Acta
Materialia," 59:19, 7340-7355,2011.
(176)
Ezaz, T., H. Sehitoglu, and H. J. Maier, "Energetics of (114) Twinning in B2
NiTi under Coupled Shear and Shuffle," Acta Materialia, 60, 1, 339-348, 2012.
(177)
Sangid, M., G. J. Pataky, H. Sehitoglu, R. F. Hamilton, and H. J. Maier, "High
Resolution Analysis of Opening and Sliding in Fatigue Crack Growth," appear
in International Journal of Fatigue, 2012.
Articles in Conference Proceedings
Not included for the sake of brevity
Invited Lectures (only presentations after 2010 are included)
1.
2.
3.
4.
5.
Invited Keynote Speaker (declined), International Symposium on Superelastic Materials 2010 at
Gyeongsang National University (GNU) on June 1-2, 2010
Invited Speaker, Therm0-mechanical Fatigue, University of Calabria, Italy, May, 2010
Invited Keynote Speaker (declined), International Symposium on Superelastic Materials 2010,
Gyeongsang National University (GNU), June 1-2, 2010
Invited Speaker, TMS Symposium, Physical and Mechanical Metallurgy of Shape Memory Alloys for
Actuator Applications, San Diego, February 27-March 3, 2011
Invited Speaker, International Symposium of Plasticity, Micromechanics-based Approaches for
Inelastic Deformation of Solids, “Recent Advances in Modeling of Fatigue and Twinning in Metals,”
Puerto Vallarta, Mexico, January 2011
17
6.
7.
8.
9.
10.
11.
Sehitoglu, 2/9/16, 17
Invited Speaker, TMS Symposium, Physical and Mechanical Metallurgy of Shape Memory Alloys for
Actuator Applications, San Diego, February 27-March 3, 2011
Invited Speaker, IUTAM, International Union of Theoretical and Applied Mechanics, University of
Cachan, Paris, France, July 3-8, 2011
Invited Speaker, ICOMAT, International Conference on Martensitic Transformations, Osaka, Japan,
4-9 September 2011
Invited Speaker, MS&T Meeting, Columbus, Ohio, October 16-20, 2011
Invited Speaker, European Mechanics Conference, Austria, July 9-12, 2012
Advisory Committee, Aalto University, Helsinki, Finland, February 22-25, 2012
Areas of Research
Thermo-mechanical Fatigue of Metals, Shape Memory and Phase Transformations
Graduate Thesis Research Advising
MS Students
Student Name
Year Graduated
Thesis Title
Placement
D. C. Slavik
1986
An Experimentally Based Unified Model for Isothermal GE
and Thermo-mechanical Loading
M. L. Karasek
1986
An Investigation Into Isothermal and Thermomechanical Fatigue Damage at Elevated
Temperatures
Snapper Tools
P. L. Lalor
1986
Mechanics Aspects of Crack Closure
Hibbitt, KarlssonSorenson
R. W. Neu
1988
A Micro-Mechanistic Life Prediction Model Suitable for Professor, Georgia
Isothermal and Thermo-Mechanical Fatigue
Institute of
Technology
D. A. Boismier
1988
Thermo-Mechanical Fatigue Mechanisms and Life
Prediction for MAR-M247 Nickel-Based Superalloy
3M Corporation
C. J. Kuhlman
1988
Simulation of the Quenching of Railroad Car Wheels
Southwest Research
Institute
W. Sun
1989
Fatigue Crack Closure Study of Creep and Constraint
Effects
Doctoral Candidate,
UIUC
D. L. Mikrut
1990
Elevated Temperature Time Dependent Behavior of
0.7% Carbon Steels
Caterpillar, Inc.
J. C. Jur
1992
Compression Deformation and Failure Mechanisms of
Unidirectional Carbon Fiber Reinforced Plastics
Engine Design/Test Co
S. G. Murphy
1993
Simulations of Cone Bore Growth in Railroad Journal
Roller Bearings
Woodward Governor
W. W. Van
Arsdell
1993
The Effect of Particle Size on the Thermomechanical
Fatigue of Metal Matrix Composites
Failure Associates
J. K. Jacobus
1995
An Experimental Investigation of the Effect of Stress
State on the Stress-Induced Martensitic
Transformation in Cu-Zn-Al and Ni-Ti Shape Memory
Alloys
McKenzie Associates
T. B-Y. Tai
1996
Fatigue Experiments and Modulus Degradation
Modeling on Sheet Molding Compound
Watkins-Johnson Co.
18
Sehitoglu, 2/9/16, 18
Student Name
Year Graduated
Thesis Title
Placement
K. A. Gall
1996
F.E.M. Study of Fatigue Crack Growth and Closure
under Double Slip
Professor, Georgia
Institute of
Technology
A. M. Garcia
1996
A Model for Roughness Induced Fatigue Crack Closure
Doctoral Candidate,
UIUC
T. J. Smith
1998
Thermo-Mechanical Modeling and Microstructural
Evolution of a Cast Aluminum Alloy
Senior Researcher,
Exxon-Mobile
J. H. Jones (P.
Kurath, coadvisor)
1998
B. E. Alaca
1999
Mechanical Properties and Microstructure of the
Aromatic Polyimide PMDA-ODA
Doctoral Candidate,
UIUC
R. D. Anderson
2000
The Effect of Aging Treatments on Shape Memory and
Pseudoelastic Behavior of Nickel-Titanium Single
Crystals
Lockheed Martin
A. D. Viswanath
2000
Thermo-Mechanical Modeling and Experimental
Results for Gray Cast Iron
---
D. Canadinc
2001
The Effect of Nitrogen and Aluminum on the
Deformation Behavior of Hadfield Manganese Steel
Single Crystals
Doctoral Candidate,
UIUC
R. Hamilton
2003
The Effect of Heat Treatment and Ni Content on the
Shape Memory Behavior of NiTi Single Crystals
Doctoral Candidate,
UIUC
C. Efstathiou
2003
Experimental Investigation of Shape Memory Behavior Doctoral Candidate,
in Fe-29%, Ni-18% Co-4% Ti(wt.%)
UIUC
S. Kibey
2003
Crack Closure in sliding Cracks
Doctoral Candidate,
UIUC
C. Bartsch
2003
Materials Behaviour under Quenching Conditions
Caterpillar
K. Verzal
2005
Contact, Sliding and Wear
3M
J. Callaway
2006
Magnetoshape Memory Power Generation
T. Ezaz
2006
Cell Divisions Stresses
Doctoral Candidate,
UIUC
M. Maheshwari
2006
Corner Stresses under Contact
Motorola
J. Oyelakin
2009
Thin Film Fracture
Shell, Nigeria
G. Pataky
2011
Fatigue of High Temperature Alloys
U of I
P. Bal
2011
Irreversibilities in Fatigue
U of I
S. Chowdury
2012
(anticipated)
Energetics of Shape Memory Alloys
U of I
Avinesh Ohja
2012
(anticipated)
Modeling Twinning in FeCr Alloys
U of I
PhD Students
Hughes Space and
Communication
19
Sehitoglu, 2/9/16, 19
Student Name
Year Graduated
Thesis Title
Placement
R. C. McClung
1988
Fatigue Crack Closure and Crack Growth Outside
the Small Scale Yielding Regime
Manager, Southwest
Research Institute
R. W. Neu
1991
An Investigation into the Mechanisms of Cone Bore
Growth in Railroad Bearings
Professor, Georgia
Institute of
Technology
M. Karayaka
1992
An Investigation into Thermomechanical Fatigue of Exxon Mobile,
Metal Matrix Composites
Houston
Y. Kadioglu
1992
Modelling of Thermo-mechanical Fatigue Behavior
in Superalloys
General Electric,
Schenectady
W. Sun
1992
Finite Element Simulations of Fatigue Crack
Growth and Closure
CTO SWAT,
Computer
Associates
Y. Jiang
1993
Cyclic Plasticity with an Emphasis on Ratchetting
Professor,
University of
Nevada, Reno
K. A. Gall
1998
The Effect of Stress Staate and Precipitation on
Stress-Induced Martensitic Transformations in
Polycrystalline and Single Crystal Shape Memory
Alloys: Experiments and Micro-Mechanical
Modeling
Professor, Georgia
Institute of
Technology, Atlanta,
GA
M. A. Balzer
1998
Mechanical Behavior of Metals Under Triaxial
Stress: Apparatus and Experiments
Jet Propulsion
Laboratory,
Pasadena, CA
I. Karaman
2000
The Competing Effects of Slip and Twinning on the
Deformation of Hadfield Manganese Steel Single
and Polycrystals
Professor, Texas
A&M University,
College Park
T. J. Foglesong
2001
Polycrystal Modeling of Precipitate Effects on the
Mechanical Behavior of an Aluminum-Copper
Alloy
Exxon Mobile,
Houston
B. E. Alaca
2003
Fabrication of Nanowire Networks Through Stress- Associate Professor,
Guided Self-Assembly
KOC University,
Turkey
D. Canadinc
2005
Modeling of Stress-Strain Response of Hadfield
Steels
Assistant Professor,
KOC University
S. Kibey
2007
Mesoscale Models: Linking Atomistics and
Continuum
Research Scientist,
Exxon Mobile,
Houston, TX
R. Hamilton
2008
Hysteresis in Phase Transformations
Assistant Professor,
Penn State
University
C. Efstathiou
2008
Experiments on Magnetic Shape Memory Materials
Post Doc, Cornell
University
M. Sangid
2010
Fatigue Modeling of Udimet 720
Assistant Professor,
Purdue University
T. Ezaz
2011
Slip-Twin Interactions and Shape Memory
Intel, Portland
20
Student Name
Thesis Title
Placement
J. Carroll (Joint with 2011
J. Lambros)
Digital Image Correlation in Fatigue Crack Growth
Sandia National
Labs.
W. Abuzaid
2012
(anticipated)
Fatigue of Superalloys- Slip Transfer Modeling and
Experiments
U of I
Jifeng Wang
2013(anticipated)
Twinning in Shape Memory Alloys
U of I
Garrett Pataky
2013
(anticipated)
Fatigue-Creep of Haynes 230
U of I
Luca Patriarcha
(jointly with Prof.
Beretta Poly.
Milano)
2013
(anticipated)
Twinning and Slip in FeCr
Poly. Di Milano
Piyas Chowdhury
2014
(anticipated)
Modeling of Nano-materials in Fatigue
U of I
5.
Year Graduated
Sehitoglu, 2/9/16, 20
Editorships of Journals or Other Learned Publications
Associate Editor, ASME, J. Pressure Vessel Technology, 1986-1989
Editorial Board, Engineering Fracture Mechanics, 1995-date
Editor, ASME Journal of Engineering Materials and Technology, 2002-2008
Associate Editor, ASME Journal of Engineering Materials and Technology, 1995-00
Guest Editor, Special Issue of Journal of Engineering Materials Technology on Shape
Memory Alloys, Oct. 1998
6.
Post-doctoral Associates and Visiting Scientists in the Past Three Years
Country of
Name
Title (percent time)
S. H. Song
Visiting Scholar (100%)
Korea
Y.
Chumlyakov
Visiting Scholar (100%)
Russia
Tomsk State University
1998-99
I. Kireeva
Visiting Scholar (100%)
Russia
Tomsk State University
1998-99
C. Engler
Postdoctoral Research Associate Brazil
(100%)
Ford Motor Company
1999-00
X. Zhang
Postdoctoral Research Associate China
(100%)
Hong Kong University
1999-00
J. H. Jun
Postdoctoral Research Associate Korea
(100%)
Yonsei University
2000-01
I. Karaman
Postdoctoral Research Associate Turkey
(100%)
Texas A&M University
2000-01
T. Kotil
Visiting Scholar (100%)
Turkey
CEO Turkish Airlines
2001-02
H. Woo
Visiting Scholar (100%)
Korea
Dongguk University
2002-03
S. Foletti
Visiting Scholar (100%)
Italy
Poly Milano
2003
Origin
Permanent Employer
Years
1998-99
21
Name
Title (percent time)
Y.
Chumlyakov
Visiting Scholar (100%)
S. As
Country of
Sehitoglu, 2/9/16, 21
Permanent Employer
Years
Russia
Tomsk State University
20032004
Visiting Scholar (100%)
Norway
Norwegian University of Science and
Technology
2005
J. H. Kim
Visiting Scholar
Korea
Seoul National University
2005-06
K. Aslantas
Visiting Scholar
Turkey
Afyon University, Turkey
2005-06
D. Canadinc
Visiting Scholar
Turkey
KOÇ University, Turkey
20072008
Y. Liu
Visiting Scholar
Singapore
Nanyang University
2007
R. Hamilton
Assistant Professor
USA
Penn State
2008
C. Efstathiou
Post Doc
USA
UIUC
2008
S. Dilibal
Visiting Scholar
Turkey
Nato General Command
2009
G. Anlas
Professor
Turkey
Bogazici University
2010
E. Guler
Visiting Scholar (Assoc.
Professor)
Turkey
Corum University
20102011
Buyang Lim
Visiting Scholar (Professor)
Korea
Sungkyunkwan University
20102011
L. Patriarca
Visiting Scholar
Italy
Politechnico di Milano
20102011
M. Sangid
Post Doc
USA
Purdue University
20102011
A. Oral
Post Doc
USA
Bogazici University, Turkey
20112012
Origin
Other Scholarly Activities
High Temperature Materials Laboratory
Established the High Temperature Materials Laboratory in the Mechanical Science
and Engineering Department. This is a unique facility with computer
controlled test machines for strain, load, environmental (vacuum), and
temperature control. A high pressure intensifier is purchased to study
material behavior at high pressures. Professor Sehitoglu expanded the
activities to test miniature pumps and thin films. Recent emphasis has been
on high resolution strain measurements. Some of these capabilities are also
outlined in the research articles.
Director, Fracture Control Program
This is a consortium of ground vehicle companies. The main emphasis in the
program is fatigue of metals.
Current Support
07 to 13
Thin Structures
Honeywell
90 to 13
Fracture Control Program (renewed
on a yearly basis)
Caterpillar, Arvin-Meritor,
Honeywell
06 to 13
Midwest Structural Sciences Center
Air Force Research Laboratory
22
07 to 12
Modeling of Fatigue Crack Nucleation
Rolls Royce
08 to 13
Twinning Studies via Experiments and NSF-DMR
DFT-Mesoscale Formulation
09 to 13
Design of Transforming Materials
09 to 13
Understanding Fundamental Materials NEUP-DoE
Degradation Processes in High
Temperature Aggressive
Chemomechanical Environments
11 to 14
Twinning in bcc Metals
NSF-ENG
11 to 14
Development of Austenitic ODS
Strengthened Alloys for Very High
Temperature Applications
NEUP-DOE
NSF-ENG
Sehitoglu, 2/9/16, 22