Table L-1 Compliance Matrix for Surface Wave Spectra Instrument Spec I.D. WAVE-001 WAVE-002 WAVE-003 WAVE-004 WAVE-005 WAVE-006 WAVE-007 WAVE-008 WAVE-009 WAVE-010 WAVE-011 WAVE-012 OPER-001 OPER-002 MECH-001 ELEC-001 DATA-001 DATA-002 SOFT-001 INTF-001 INTF-013 INTF-002 INTF-003 INTF-004 INTF-005 INTF-006 INTF-007 INTF-008 INTF-009 INTF-010 INTF-011 Parameter Units Minimum wave heave range Minimum wave direction range Minimum wave period range Maximum wave heave range Maximum wave direction range Maximum wave period range Wave height accuracy Wave direction accuracy Wave period accuracy Wave height resolution Wave direction resolution Wave period resolution m Maintain calibration Deployment Interval Corrosion resistant Return to defined operational state Non-volatile internal data storage Internally stores calibration sensors serial numbers Emulates break of signal by software character sequence Connects to the platform controller for power and communications Includes a standard type OOI bulkhead connector on instrument housing. Objective Operates from supply voltage Time stamping capabilities or latency between data sampling and data output degrees sec m degrees sec percent degrees sec m degrees sec Yes/No months Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No VDC Yes/No Internal clock. Objective Yes/No Internal clock capable of time synchronization Yes/No User-settable baud rate Ethernet interfaces provide auto-discovery mechanism Communicates while deployed with OOI infrastructure Remotely accessed and controlled via communication interface Stored data accessible remotely by communications interface Supports remote firmware installation baud Yes/No Yes/No Yes/No Yes/No Yes/No Parameter Value Substantiation Verification Approach INTF-012 COMP-001 SHIP-001 SHIP-002 SHIP-003 SHIP-004 SHIP-005 IDNT-001 QUAL-001 QUAL-002 QUAL-003 QUAL-004 QUAL-005 Polled and asynchronous mode operation Compatible with applicable national and international standards Reusable transportation case with shock mounting Fits within an ISO shipping container Instruments in their transportation cases can survive shipping conditions Instruments can be stored without damage or degradation. Objective External labels specifying safe handling precautions All components are marked indelibly on an exterior surface Manufactured in accordance with the manufacturer’s best practices. Records of quality assurance tests and inspections available A certificate of compliance is provided with each delivered unit Materials of the instrument packages were chosen and treated First Article Testing meets specifications ISO 2008:9001 certification. Objective Yes/No Yes/No Yes/No Yes/No Yes/No Degrees C, months Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Table L-2 Proposed Instrument Model Instrument Type Surface Wave Spectra Specification Version 2-02 Document Control Number 3305-00005 2011-05-25 Contractor Instrument Make and Model Number or Designation