RESEARCH INTERESTS Pulping and Bleaching TEACHING ED74

advertisement
RESEARCH INTERESTS
Pulping and Bleaching
TEACHING
1. ED74.01
Pulp manufacturing
2. ED74.02
Fiber and Paper Fundamentals
3. ED74.16
Recycled Fiber Technology
SELECTED PUBLICATIONS
Papers related to Asian / Chinese markets
1. Title: Chinese domestic pulps: Optimal production and proper characterization (key
note)Authors: Basta J., Heijnesson-Hulten A., Fu S., Zhan H., et al. Source: Proceedings of 4th
International Symposium on Emerging Technologies of Pulping and Papermaking, Guangzhou,
China, 8-10 Nov. 2010
2. Title: The influence of storage on bamboo pulps and paper quality Authors: Guo S., HeijnessonHulten A., Basta J., et.al. Source: Proceedings of 4th International Symposium on Emerging
Technologies of Pulping and Papermaking, Guangzhou, China, 8-10 Nov. 2010
3. Title: The effects of fines of wood and non-wood pulps on sheet strength properties Authors:
Wang Q.,Heijnesson-Hulten A., Zhan H., Basta J., et.al. Source: Proceedings of 4th International
Symposium on Emerging Technologies of Pulping and Papermaking, Guangzhou, China, 8-10
Nov. 2010
4. Title: The effects on fibre and pulp properties of bamboo cooked to different kappa
numbersAuthors: Heijnesson-Hulten A., Guo S., Basta J. et.al. Source: Proceedings of 4th
International Symposium on Emerging Technologies of Pulping and Papermaking, Guangzhou,
China, 8-10 Nov. 2010
5. Title: The effects on pulp quality after cooking and bleaching when bamboo is cooked to
different kappa numbers. Authors: Greschik T., Guo S., Heijnesson-Hulten A., Basta J., et al.
Source: Proceedings of 4th International Symposium on Emerging Technologies of Pulping and
Papermaking, Guangzhou, China, 8-10 Nov. 2010
6. Title: Influence of bleaching sequence on brightness stability, refining and chemical surface
properties. Authors: Heijnesson Hultén A., Basta J., Greschik T., Zhang, C. Guo S., Zhan H Source:
2nd ICPPB Nanjing, China, Nov. 2008
7. Title: Study on ECF, Mild-ECF and TCF bleaching of non-wood pulps. Authors: Zhan H., Guo S.,
Zhang C., Basta J., Heijnesson-Hulten A., Greschik T Source: 2nd ICPPB Nanjing, China, Nov.
2008
8. Title: The effects of bleaching sequence on recyclability of bamboo and bagasse pulpsAuthors:
Zhan H., Zhuo, Y., Li B., Basta J., Greschik, T Source: 2nd IPEC, Tianjin, China, 2008 also in. Prog.
Pap.Recycling,vol.17,no.4, Nov.. 2008, pp. 11-14
9. Title: Pulp and fiber characteristics of wheat straw and eucalyptus pulps-A
comparisonAuthors: Guo S., Zhang, C., Zhan H., Heijnesson Hultén A., Basta J., Greschik T
Source: 2nd IPEC, Tianjin, China, May 12-14, 2008, pp.475-478
10. Title: Environmental aspects of wheat straw pulp bleaching Authors: Greschik T., Basta J.,
Zhang C. F., et al Source: 2nd IPEC, Tianjin, China, May 12-14, 2008, 475-478
11. Title: Study on Kraft cooking of eucalyptus using MODDE statistical software. Authors: Guo S.,
Zhan., Basta J., Fu S Source: China Pulp and Paper, 26(4): 8-11(2007)
12. Title: Optimization of bamboo pulping using factorial design Authors Guo, S; Basta, J; et.al
Source: 5th INWFPPC, Guangzhou, China, p.8-11 (2006)
13. Title: Study on the environmentally friendly DQP bleaching of non wood pulps. Authors: Zhan
H. Y., Li B. Y., Basta J., Greschik T., Blom C., Luo J.S Source: China Pulp and Paper, 2005, 24 (4): 14
14. Title: Comparison of ECF-light, TCF and CEH bleaching of non-wood fibers. Authors: Greschik T.,
Basta J., Zhan H. Y., Zhan, H., Li B., Quin C. Source: IPEC, Tianjin, China, May 12-14, 2004, Book B:
310-315
15. Title: Study on ECF bleaching of Bamboo kraft pulps Author: Qin, C., Basta J., et al. Source: IPEC
Tianjin, China, May 12-14, 2004
16. Title: Comparison between OQP and CEH bleaching of non-wood pulps. Authors: Zhan H. Y., Li
B. Y., Basta J., Zhan H., Li B., Li J. Source: China Pulp and Paper, 22(10): 8-11, 2003
17. Title: Overall aspects of H2O2 bleaching of non-wood fibers. Authors: Basta J., Holtinger L.,
Bloom C., Zhan H, Huang F., Li B., Li J Source: 2nd ISETTP, Guangzhou, China, Nov. 8-11, 2002,
pp.377-385
Papers related to Fibre / Fibre properties
1. Title: A comparison of the surface properties of ECF and TCF bleached softwood kraft
pulpsAuthor: Wane, G; Basta J; Jarnstrom L; Germgard, U Source: Appita, vol.60, no5, Sept.2007,
pp 396-399
2. Title: Comparison of different XPS methods for fiber surface analyses Author: Hulten, AH;
Basta J; Larsson, P; Ernstsson, M Sorce: Holzforschung, vol.60, no. 1,2006, pp 14-19
3. Title: Surface chemical composition and morphology of ITC kraft fibers as determined by XPS
and FE-SEM Author: Duchesne, I; Daniel, G; van Leerdam, GC; Basta, J Source: J.Pulp Pap.Sci.,
vol.29, no.3, March 2003, pp 71-7
Papers related to environmental aspects / characterization
1. Title: Formation of AOX and OCl in ECF bleaching of birch pulps Author: Bjorklund, M;
Germgard, U; Basta, J Source: Tappi J., vol.3, no.8, Aug.2004, pp 7-12
2. Title: Minimising barium sulphate scale formation in ECF bleach plants Author: Bryant, PS;
Samuelsson, A; Basta J Source: Tappi J., vol.2, no.3, March 2003, pp3-7
3. Title: Comparative characterisation of bleach plant effluents from modern ECF bleachingEucalyptus and softwood pulps Author: Herstas-Svard, S; Basta, J; Jour,P; Wane, G Source: O
Papel, vol.59, no.3, March 1998, pp52-58
4. Title: Increasing biotreatability of ECF bleaching effluents by ultrafiltration and partial closure
of alkaline filtrates Author: Herstad-Svard, S; Jour, P; Bryant, P; Basta, J; Aggarwal, P Source:
1998 Tappi Pulping Conference, Montreal Quebec, Canada, 25-29 Oct. 1998, Book 3, pp11651176
5. Title: Partial closure in modern bleaching sequences Author: Basta, J; Wane, G; Herstad-Svard,
S; Edwards, L; Gu, Y et.al. Source: Tappi J.,vol. 81, no.4, Apr.1998, pp.136-140
6. Title: Effluent characterisation in TCF bleaching Author: Holtinger, L; Basta, J; Jour, P; HerstadSvard, S Source: Int. Emerg. Conf., Orlando, FL, USA, 9-13 March 1997, 12pp
7. Title: Partial closure in ECF bleach plants Author: Bryant, P; Basta, J; Johansson, NG Source: Int.
Emerg. Conf., Orlando, FL, USA, 9-13 March 1997, 10pp
Papers related to different aspects of cooking and bleaching of various pulps
1. Title: High cooking kappa number for increased pulp production and better pulp
quality Author: Johansson, B; Aggarwal, P; Hedlund_Bjornwal, T; Basta, J; Forsstrom, A Source:
2005 IPBC, Stockholm, Sweden, 14-15 june 2005, pp.81-86
2. Title: Optimum kappa cooking -A versa tile tool to improve the financial performance of an
eucalyptus pulp mill Authors: Forsstrom AB., Basta J., Blom Ch. Source: O Papel, Junho, 2006,
p.96-104
3. Title: Influence of softwood Kraft cooking conditions on brightness development in ECF
bleaching Author: Bjorklund, M; Basta, J; Germgard, U Source: Appita, vol.57, no.3, May 2004,
pp. 234-239
4. Title: New and improved possibilities in D100 bleaching Authors: Basta, JJ; Andersson, L; Blom,
C; Forrstrom, A; Johansson, NG; Wane, G Source: 1992 Tappi Pulping Conf. Boston, USA, 1-5
Nov. 1992, Book 2, pp.547-553
5. Title: Low AOX, possibilities & consequences Author: Basta, J et.al. Source: 1989 Tappi Pulping
Conf. 22-25 October, Seattle, USA, pp.427-436
6. Title: Reduction of AOX levels: Part 2 – chlorine free bleaching Author: Basta, J; et.al. Source:
Appita, vol. 45, no.1, Jan.1992, pp 29-32
7. Title: Reduction of AOX levels: Part 3 – lowering of kappa number Author: Basta, J; et.al.
Source: IPBC 1991, 11-14 June, Stockholm, Sweden, vol.3, pp.23-33
8. Title: Sodium hydroxide cooking with addition of Anthraquinone Author: Basta, J Source: PhD
Dissertation, Chalmers University of Technology, Gothenburg, Sweden 1984
Papers related to TCF Bleaching
1. Title: Emerging technologies in TCF bleaching Authors: Basta, J; Holtinger, L; Lundgren, P;
Persson C: Source: 1995 Tappi Pulping Conf, Chicago, USA, pp.53-57
2. Title: Metal management in TCF bleaching Authors: Basta, J; Holtinger, L; Hermansson, W;
Source: 1994 IPBC, June 12-16, Vancouver, Canada, pp.23-34
3. Title: Peroxo compounds in TCF bleaching Authors: Basta, J; Holtinger, L; Hällström, A-S;
Lundgren, P; Source: 1994 Tappi Pulping Conference, San Diego, USA, p.953-956
4. Title: Controlling the profile of metals in pulp before H2O2 treatment Authors: Basta, J;
Holtinger, L; Höök, J; Source: 6th Symp. on Wood and Pulp. Chem. Melbourne, Australia
ONGOING AND COMPLETED PROJECTS
N/A
AWARDS AND HONORS
N/A
PROFESSIONAL AFFILIATIONS
N/A
RESEARCH KEYWORDS
1. Pulping
2. Bleaching
3. Fibre properties
4. Paper quality
Download