Australian Government
No. C 12, Tuesday 7 December 2010
Published by the National Industrial Chemicals Notification
and Assessment Scheme - NICNAS
Gazette
CHEMICAL
© Commonwealth of Australia 2010
ISBN 1035-9877
This work is copyright. Apart from any use as permitted under the Copyright Act 1968, no part may be reproduced by any
process without prior written permission from the Commonwealth available from the Attorney-General’s Department.
Requests and inquiries concerning reproduction and rights should be addressed to:
Commonwealth Copyright Administration
Copyright Law Branch
Attorney-General's Department
Robert Garran Offices
National Circuit
Canberra ACT 2600
email: Commonwealth.Copyright@ag.gov.au <mailto:Commonwealth.Copyright@ag.gov.au>
web: <http://www.ag.gov.au/cca>
The Industrial Chemicals (Notification and Assessment) Act 1989 (the Act) commenced on
17 July 1990. As required by Section 5 of the Act, a Chemical Gazette is published on the
first Tuesday in any month or on any days prescribed by the regulations.
CONTENTS
CONSULTATIONS
NIL
SPECIAL NOTICES
1
OFFICE CLOSURE-CHRISTMAS AND NEW YEAR 2010-11
5
2
TRAINING AND AWARENESS OUTREACH
7
3
SECONDARY NOTIFICATION OF NOTIFIED CHEMICAL
GLYCINE, N-COCO ACYL DERIVS., SODIUM SALTS (SODIUM
COCOYL GLYCINATE) EX/130 (LTD/1306)
9
4
NEW DATA ON SENSIVA SC 50 (NA/966)
10
5
NEW DATA ON A PREVIOUSLY ASSESSED CHEMICAL
11
6
DEFINITION OF INDUSTRIAL NANOMATERIALS AND
REMINDER OF ADJUSTMENTS TO NICNAS NEW CHEMICALS
PROCESSES FOR INDUSTRIAL NANOMATERIALS
12
7
REQUEST FOR INFORMATION ON COSMETIC INGREDIENTS
16
NEW CHEMICALS
SUMMARY REPORTS
8
LTD/1466
POLYMER IN HP SCITEX PRINTER INK SERIES
20
9
LTD/1468
POLYMER IN DISPERBYK 167
23
10
LTD/1478
POLYMER IN EPR RESIN
26
11
LTD/1485
SYL-OFF® SL 9176 ANCHORAGE ADDITIVE
28
12
LTD/1490
GLYCINE, N-COCO ACYL DERIVS., SODIUM
SALTS (INCI NAME: SODIUM COCOYL
GLYCINATE)
31
13
LTD/1491
POLYMER IN RE-89-8919
34
14
LTD/1492
STARCH COPOLYMER IN POROSEAL
37
15
LTD/1494
CIM-17
40
16
LTD/1495
ISOCYANATE POLYMER IN PUR-FECT LOK 91834A
42
17
LTD/1497
BECKOPOX® EH 613W/80WA
45
18
STD/1374
GLUCOSYL HESPERIDIN
48
19
PLC/927
POLYMER IN TN615-SERIES TONER
51
20
PLC/937
POLYMER IN 5698 SERIES OLEORESINOUS
COATINGS
53
21
PLC/938
POLYMER IN RC-49125
55
22
PLC/949
POLYMER IN URALAC SN865 S2-75 ND
57
23
PLC/951
POLYMER IN ESTAREZ 7265 BASE
59
24
PLC/954
POLYMER IN ADDITOL VXW 6360
62
25
PLC/955
POLYMER IN VIAMIN HP 366/601BE
64
26
PLC/957
POLYMER IN F61063
66
27
EX/140
QUINONE METHIDE IN IRGASTAB UV 22
69
28
EX/158
MOBIL DELVAC 1 ESP 5W-40
72
29
ACCESS TO FULL PUBLIC REPORTS
75
PERMITS ISSUED
30
EARLY INTRODUCTION PERMITS
76
31
LOW VOLUME CHEMICAL PERMITS
77
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES
32
NOTICE OF CHEMICALS ELIGIBLE FOR LISTING ON THE
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES FIVE
YEARS AFTER ISSUING OF ASSESSMENT CERTIFICATES
78
33
NOTICE OF CHEMICALS ELIGIBLE FOR IMMEDIATE LISTING ON
THE AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES
AFTER ISSUING OF ASSESSMENT CERTIFICATES
80
34
NOTICE OF AMENDMENTS TO THE AUSTRALIAN INVENTORY
OF CHEMICAL SUBSTANCES
81
6
1
OFFICE CLOSURE-CHRISTMAS AND NEW YEAR 2010-11
The NICNAS office will be closed from Saturday 25 December 2010 and re-open on Tuesday 4
January 2011. If you need urgent assistance during this time, please call Nick Miller on 0407 228
285.
NICNAS staff would like to wish you all a safe and enjoyable festive season.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
7
2
TRAINING AND AWARENESS OUTREACH
NICNAS’s preferred approach to ensuring compliance with our legislation is to work with
industry, providing advice to help you understand your regulatory obligations, and assistance
in finding the most practical way to meet those obligations.
As part of our commitment to raising industry awareness, NICNAS conducts free training
and awareness sessions each year. These training sessions are open to all interested
stakeholders, such as registered chemical introducers and regulatory consultants.
NICNAS officers will be in Brisbane, Sydney and Melbourne in the coming months
conducting stakeholders training sessions, and are seeking an expression of interest on
attendance.
The training session dates and closing dates for expression of interest (EOI) are:
Brisbane: 24 February 2011 – EOI: 28 January 2011
Sydney: 10 March 2011 – EOI: 11 February 2011
Melbourne: 5 May 2011 – EOI: 8 April 2011
Three sessions will be held on each day with approximate running times as follows:
Session 1 – “Introduction to NICNAS”: 0915 – 1115
Session 2 – “Cosmetics – your regulatory obligations”: 1130 – 1330
Session 3 – “Industrial nanomaterials”: 1415 – 1530
Session 1 – “Introduction to NICNAS” will cover the following topics:
Overview of regulatory obligations for all chemical introducers;
NICNAS Registration;
The Australian Inventory of Chemical Substances (AICS) and searching listed chemicals;
New chemical notification & assessment, including exemptions;
Annual reporting of chemicals to NICNAS;
Existing Chemicals;
Prior Informed Consent chemicals (PIC); and
NICNAS Compliance & Enforcement functions
Session2 – “Cosmetics – your regulatory obligations” will cover:
Overview of regulatory obligations for all chemical introducers;
What is a cosmetic and why assess them?
NICNAS registration for imported or manufactured cosmetics;
Cosmetics vs Therapeutic goods;
Reporting requirements;
Australian Inventory of Chemical Substances (AICS);
New industrial chemicals;
The Cosmetics Standard 2007;
The NICNAS Cosmetics Guidelines; and
Cosmetics and toiletries – ingredient labelling
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
8
Session 3 – “Industrial nanomaterials” will cover:
What is an "industrial nanomaterial"?
How nanomaterials are currently regulated?
Why is regulation needed?
NICNAS's consultation results on a proposal for regulatory reform of industrial
nanomaterials;
Administrative arrangement changes for nanoforms of new chemicals; and
How to get more information.
If you wish to attend please provide your name; industry/company; number of attendees;
preferred city and sessions, and email to outreach@nicnas.gov.au
If you have any further queries about industry training, please phone (02) 8577 8800, or
Freecall 1800 638 528 or Email outreach@nicnas.gov.au.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
9
3
SECONDARY NOTIFICATION OF NOTIFIED CHEMICAL
GLYCINE, N-COCO ACYL DERIVS., SODIUM SALTS (SODIUM COCOYL
GLYCINATE)
EX/130 (LTD/1306)
Under subsection 65(1) of the Industrial Chemical (Notification and Assessment) Act 1989
(the Act), the Director requires the secondary notification of Glycine, N-coco acyl derivs.,
sodium salts (Sodium Cocoyl Glycinate) by:
Unilever Australia Limited
20 Cambridge Street
Epping, NSW 2121
and
Amtrade International Pty Ltd
574 St Kilda Road
Melbourne, VIC 3004
The data required are as follows:
Any changes in the following data items from that submitted in the original notification:
1.
Identity, Properties and Uses
a) proposed uses of the chemical;
b) concentration of the chemical in end-use products;
c) import quantity (and changes to occupational exposure for workers); and
d) physico-chemical properties.
2.
Toxicity
Human health:
a) the chemical’s toxic effects following single dermal and inhalation exposure;
b) the chemical’s toxic effects following repeated exposure;
Ecotoxicity:
c) the toxicity of the chemical to fish
d) the toxicity of the chemical to aquatic invertebrates
e) the effects of the chemical on algae
f) additional data related to the chemicals biodegradability and potential to
bioaccumulate.
Any additional available data on the toxicological and/or environmental effects of the
chemical should also be provided. The requested data may be provided through the
submission of studies (tests conducted on the notified chemical or suitable analogue) or other
sources of information.
The required information or alternatively, a timetable for the provision of the requested
information, should be provided to the Director within 28 days of the publication of this
notice.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
10
4
NEW DATA ON SENSIVA SC 50 (NA/966)
Sensiva SC 50 was assessed by NICNAS as a standard notification (NA/966) and a public
report published in October 2001. EasySun Pty Ltd of North Carlton VIC 3054 recently
advised NICNAS of the intention to import a cosmetic product containing Sensiva SC 50 at a
concentration below 1%. The product is a towelette designed to apply a self tanning
formulation to the skin.
Sensiva SC 50 was assessed as a new chemical to be of low acute oral and dermal toxicity,
mildly irritating to the skin and a severe eye irritant.
At present, no new toxicity data have been provided.
The proposed new use of Sensiva SC 50 in finished ready-to-use towelette products would
not significantly increase occupational, public or environmental exposures, and therefore
does not change the conclusions of the risk assessment published in the Full Public report for
NA/966. On this basis, NICNAS concludes that a secondary notification is not required at
this time under Section 65 of the Industrial Chemicals (Notification and Assessment) Act
1989.
The additional information on the new use will be appended to the NA/966 public report.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
11
5
NEW DATA ON A PREVIOUSLY ASSESSED CHEMICAL
Canon Australia Pty Ltd (ABN 95 767 533 621) has advised of an increase in the introduction
volume of NT-20 containing a chemical previously assessed by NICNAS as a limited
notification (NA/937). At the assessment of the new chemical, the importation volume into
Australia was proposed to be less than 1 tonne/year. The current import volume of the
chemical in NT-20 is not expected to exceed 4 tonnes/year.
The notified chemical in NT-20 has an oral LD50 > 2000 mg/kg, is non-irritating to rabbit
skin, slightly irritating to rabbit eyes, non-sensitiser to rabbit and guinea pig, non-mutagenic
and non-clastogenic. Assessment of the potential exposure due to the increase in volume of
the chemical indicates that this scenario would not result in increased risks to occupational
and public health and safety.
The environmental exposure assessment on the previously assessed chemical was based on an
estimate of 200 kg/year of waste from accidental spillages and widespread releases of spent
cartridges and bottles. The increase in introduction volume may potentially result in 800 kg
of raw notified chemical being disposed to landfill. However, significant leaching of the
chemical from landfill is not expected based on the low water solubility (< 0.1 mg/L at
20°C), moderately high log POW (4.2) and high log KOC (> 5.4) of the notified chemical. The
overall environmental risk presented remains low.
The increase in importation volume does not change the conclusions of the risk assessment
published in the full public report of the previously assessed polymer, and therefore does not
trigger a secondary notification, according to Section 64(2)(e) of the Industrial Chemicals
(Notification and Assessment) Act 1989.
The additional information will be appended to the full public report of NA/937.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
12
6
DEFINITION OF INDUSTRIAL NANOMATERIALS AND REMINDER OF
ADJUSTMENTS TO NICNAS NEW CHEMICALS PROCESSES FOR INDUSTRIAL
NANOMATERIALS
This Notice is directed to introducers of nanomaterials that are new chemicals. The National
Industrial Chemicals Notification and Assessment Scheme (NICNAS) is introducing new
administrative processes for the notification and assessment under Part 3 (Notification and
Assessment of Industrial Chemicals) of the Industrial Chemicals Notification and Assessment Act
1989 (the Act) of industrial nanomaterials that are considered to be New Chemicals.
As published in October and November issues of the Chemical Gazette these new
administrative arrangements will be effective from 1 January 2011. They will apply to any
New Chemical that falls under the following working definition of ‘industrial nanomaterial’.
WORKING DEFINITION
NICNAS has amended one of the notes to the working definition to increase clarity following
feedback from stakeholders. This clarification is highlighted in italics below:
… industrial materials intentionally produced, manufactured or engineered to
have unique properties or specific composition at the nanoscale, that is a size
range typically between 1 nm and 100 nm, and is either a nano-object (i.e. that is
confined in one, two, or three dimensions at the nanoscale) or is nanostructured
(i.e. having an internal or surface structure at the nanoscale)”
Notes to the working definition:

intentionally produced, manufactured or engineered materials are distinct from
accidentally produced materials

‘unique properties’ refers to chemical and/or physical properties that are different
because of its nanoscale features as compared to the same material without nanoscale
features, and result in unique phenomena (e.g. increased strength, chemical reactivity
or conductivity) that enable novel applications.

aggregates and agglomerates are considered to be nanostructured substances

where a material includes 10% or more number of particles that meet the above
definition (size, unique properties, intentionally produced) NICNAS will consider this
to be a nanomaterial.
REMINDER OF ADJUSTMENTS TO NICNAS NEW CHEMICALS PROCESSES
FOR INDUSTRIAL NANOMATERIALS
The outlined adjustments, below, only apply to nanomaterials that are new chemicals. That is
a chemical meeting the above definition of a nanomaterial, and is not listed on the Australian
Inventory of Chemical Substances. (Nanomaterials that have a conventional, bulk form listed
on the AICS are considered to be existing chemicals and are not subject to these
adjustments.)
Specific amendments to current processes and practices vary between new chemicals
exemptions and new chemical certificates and permits as follows:
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
13
i) Exemption categories:
New chemical exemptions are underpinned by S 21 (4) and (6) of the Act. S 21AA imposes
annual reporting obligations on persons introducing chemicals under S 21 (4) and (6) of the
Act.
From 1 January 2011, nano-forms of new chemicals will not be permitted under exemption
categories where human and/or environmental exposure can reasonably be anticipated, these
being:
 Low volume cosmetic and non-cosmetic exemptions (S21(4))
 Low concentration (<1%) non hazardous cosmetic exemption (S21(6c)).
Introducers who advise NICNAS of introductions under these exemption categories will be
required to declare that their chemicals are not nanomaterials, according to the NICNAS
working definition above.
The following exemption categories will remain available for nanoforms of new chemicals:
 Transhipment exemptions – current conditions of introduction remain unchanged
(S21(6b))
 R&D exemptions S21(6a)) – with some amendments to the annual reporting
requirements. All nanomaterials introduced in volumes over 100g/year will be identified
as nanomaterials and their full chemical name provided.
Any substances that meet the working definition of ‘industrial nanomaterial’ (above)
currently introduced under exemption categories will require a NICNAS permit or certificate
if introduction is to continue after 01 January 2011. Introducers should contact NICNAS
prior to this date to determine the most appropriate notification category for their
nanomaterial(s).
ii) Permit categories:
All permit categories under Part 3 of the Act will remain available for use by introducers of
nano-forms of new chemicals. Some changes to notification forms and information
requirements may apply as follows:

Addition of a declaration by the notifier on the permit application forms stating that
the chemical is a nanomaterial.

More specific information (such as particle size, shape and other specific information
on properties) may be required under specified conditions (see Requirements to
Provide Additional Data, below).
To complement these changes NICNAS may stipulate permit conditions for conventional
chemicals where it can be reasonably assumed that a nano-form may be introduced in the
future.
iii) Certificate categories
Of currently available certificate categories, all except self-assessment categories will be
available for use by introducers of nano-forms of new chemicals. Introducers who annually
report introductions under self –assessed certificate categories will be required to declare that
their chemicals are not nanomaterials, according to the NICNAS working definition above.
Some changes to notification forms and information requirements may apply as follows:
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
14


Addition of a declaration by the notifier on the certificate application forms stating
that the chemical is a nanomaterial or not.
More specific information (such as particle size, shape and other specific information
on properties) may be required under specified conditions (see Requirements to
Provide Additional Data, below).
Complementing these changes, NICNAS may stipulate specific secondary notification
conditions to the assessment of conventional chemicals where a nano-form may be
introduced in the future.
REQUIREMENTS TO PROVIDE ADDITIONAL INFORMATION
Information additional to those items specified in the Schedule to the Act may be required on
a case-by-case basis. The Act provides for the Director, NICNAS to require further
information where he/she considers it necessary for the purpose of assessing the chemical.
Additional information may be required on the nano-specific characteristics of chemical. For
example, where the nanomaterial is introduced as a solid/powder or as a dispersion and is
insoluble or known to be biopersistent, then as a minimum requirement the primary particle
size distribution of the nanomaterial will be required.
Further additional data may be required such as surface area, impurity profile and surface
properties (such as charge and coatings), on a case-by-case basis.
Guidance on data requirements will be provided to notifiers on the NICNAS website and the
NICNAS Handbook for Notifiers.
REASONS FOR ADMINISTRATIVE CHANGES
These administrative amendments to the new chemicals notification and assessment
framework are components of the NICNAS strategy for regulating industrial nanomaterials.
They address the uncertainty surrounding the risks posed by industrial nanomaterials and the
appropriateness of current risk assessment protocols and practices and aim to maintain or
enhance existing levels of public health, worker safety and environmental protection in
relation to industrial nanomaterials,
The changes to the notification and assessment of nano-forms of new chemicals have been
developed in consultation with the NICNAS Nanotechnology Advisory Group, comprising
industry, community, government and scientific experts. Changes to the new chemicals
framework for nanomaterials included in NICNAS’s Proposal for Regulatory Reform of
Industrial Nanomaterials, was strongly supported by stakeholders.
These administrative arrangements will be reviewed following a reasonable period of
implementation. Experience gained through administrative amendments will inform any
future legislative amendments.
For information on NICNAS’s consultation on the Proposal for Regulatory Reform of
Industrial Nanomaterials, please see:
http://nicnas.gov.au/Current_Issues/Nanotechnology/Stakeholder_Consultation.asp
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
15
NEED MORE ADVICE?
Training for notifiers will be rolled out prior to introduction of these changes and further
information on such activities will be detailed via notices on the NICNAS website in coming
months. Alternatively, please contact NICNAS for more guidance and/or advice on this
matter.
For further information, please contact:
Nicola Hall
Phone: (02) 8577 8871
Fax: (02) 8577 8888
Email: nicola.hall@nicnas.gov.au
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
16
7
REQUEST FOR INFORMATION ON COSMETIC INGREDIENTS
The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) is seeking
assistance from individuals and organisations in providing information on chemical ingredients in
certain products that were previously regulated as medicines by the Therapeutic Goods
Administration (TGA) and are currently regulated as cosmetics by NICNAS. The purpose is to
identify chemicals that meet the criteria for recognition as existing cosmetic (industrial) chemicals for
entry on the Australian Inventory of Chemical Substances (AICS).
For information on the background, history and eligibility criteria, please read
http://www.nicnas.gov.au/About_NICNAS/Reforms/Cosmetics_Reforms.asp.
This notice is directed to all persons involved in manufacture, importation and trade of one or more of
the chemicals listed in Attachment 1 and Attachment 2. Specific information is being sought on
chemical entities (i.e. single substances) and products containing these chemicals. NICNAS needs
your assistance in providing further information that will be used to determine whether these
chemicals were ingredients in eligible listed, registered or exempt products that were regulated by
TGA during September 2004 – September 2007 and are currently regulated as cosmetics by NICNAS.
Eligible product types include:
o Secondary sunscreen skin products with sun protection factor (SPF) less than 15;
o Primary sunscreen skin products with SPF less than 4.
o Antiperspirants that derive their antiperspirant properties from inorganic salts of aluminium,
zinc or zirconium only;
o Unmedicated anti-acne preparations having only a cleansing action or purpose;
o Anti-dandruff lotions or shampoo;
o Anti-bacterial skin products.
Attachment 1
Contains a list of chemicals that were nominated in the February-May 2010 Call for Information and
for which further information is required to determine the eligibility of these chemicals to be listed on
AICS.
The specific information sought on Attachment 1 is: For chemicals on this list that were ingredients in eligible listed or registered TGA products
on the Australian Register of Therapeutic Goods (ARTG), please provide the Australian
Approved Name (AAN);
 For chemicals on this list that were ingredients in TGA-exempt products, please provide proof
in the form of product labeling, product packaging, packing slips, invoices or advertising
material. They must clearly show the name of the chemical(s) in Attachment 1 as being an
ingredient of the product and evidence that the date of trade was some time during the period
September 2004 – September 2007.
 The full chemical name in the form of a Chemical Abstracts Service (CAS) name and CAS
registry number (except where not required).
Attachment 2
Contains a list of chemicals that were in listed products in the ARTG during the period September
2004 – September 2007 and may be eligible for AICS listing, but requires information on chemical
identity. The specific information sought on Attachment 2 is: The full chemical identity of each chemical in the list, in the form of:
o CAS name
o CAS number
The information is to be provided by 7th March 2011.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
17
After all the submissions have been received and the verification process completed, NICNAS will
publish the full list of chemicals eligible for listing on the public AICS in the Chemical Gazette.
Anyone with information pertaining to this request is strongly encouraged to contact NICNAS.
If you would like further information on this activity, or would like to provide information, please
contact Dr Matthew Gredley by phone: (02) 8577 8873, fax: (02) 8577 8888 or email:
matthew.gredley@nicnas.gov.au.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
18
Request for Information on the following lists chemicals
ATTACHMENT 1: Cosmetic ingredient names requiring AANs and chemical identity
Ingredient Name
2-Oleamido-1,3-Octadecanediol
Acetyl Hexapeptide-8
Acetyl Tetrapeptide-2
Acrylates/Carbamate Copolymer
Allyl Methacrylates Crosspolymer
Alpinia speciosa leaf extract
Alteromonas Ferment Extract
Anhydroxylitol
Biosaccharide Gum-4
Caprylol Salicylic Acid
Ceteareth-60 Myristyl Glycol
Ceteareth-6 Olivate
Clintonia Borealis Root Extract
Dimethicone/Phenyl Vinyl Dimethicone Crosspolymer
Dimyristyl Tartrate
Dipalmitoyl Hydroxyproline
Dipeptide-2
Echium Plantagineum Seed Oil
Erythrityl Triethylhexanoate
Euglena Gracilis Extract
HDI/Trimethylol Hexyllactone Crosspolymer
Hesperetin
Hesperetin Laurate
Hexapeptide-2
Hydrogenated Palm Glycerides Citrate
Hydrolyzed Malt Extract
Hydroxypalmitoyl Sphinganine
Hydroxypropyl Tetrahydropyrantriol
Hydroxypropyltrimonium Hydrolyzed Wheat Protein
Ilomastat
Laminaria Ochroleuca Extract
Lapsana Communis Extract
Magnesium Oleth Sulfate
Magnesium PCA
Manganese PCA
Mangostin
Narcissus Tazetta Bulb Extract
Octadecenedioic Acid
Oxido Reductases
Pearl Powder
Chemical Gazette
Australian
Approved Name
(AAN)
CAS name
CAS Number
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
19
PEG-75 Shea Butter Glycerides
PEG-200 Hydrogenated Glyceryl Palmate
Pinus taeda Bark Extract
Pollen Extract
Polyglyceryl-3 Beeswax
Potato Starch Modified
Propylene Glycol Heptanoate
Quaternium-90 Bentonite
Saccharomyces/Copper Ferment
Saccharomyces/Gold Ferment
Saccharomyces/Manganese/Silicon/Calcium Ferment
Saccharomyces/Xylinum/Black tea ferment
Saccharomyces/Zinc/Iron/Strontium/Selenium/Copper
Ferment
Saxifraga Sarmentosa Extract
Sodium Threonate
Soluble Collagen
Soybean Glycerides
Tetrahydrobisdemethoxydiferuloylmethane
Tetrahydrodemethoxydiferuloylmethane
Tri-C14-15 Alkyl Citrate
Xylitylglucoside
Xymenynic Acid
Zinc PCA
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
Not required
ATTACHMENT 2: Cosmetic ingredients requiring only chemical identity
Ingredient Name
CAS Name
CAS Number
Arginine ferulate
Voandzeia subterranea seed extract
Saccharomyces/Zinc Ferment
Poly C10-30 Alkyl Acrylate
Polygonum Cuspidatum Root Extract
Vitreoscilla Ferment
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
20
8
PUBLICATION SUMMARY REPORT
Polymer in HP Scitex Printer Ink Series
Summary Report
Reference No: LTD/1466
CPI Graphics Ltd (ABN 54 004 081 501) of 41-45 Mills Road, Braeside VIC 3195, DIC
Australia Pty Ltd (ABN 12 000 079 550) of 42 Sunmore Close, Heatherton VIC 3202,
Hewlett-Packard Australia Pty Ltd (ABN 74 004 394 763) of 353 Burwood Highway, Forest
Hill VIC 3131 and Huntsman Corporation Australia Ltd (ABN 67 083 984 187) of 454-460
Somerville Road, West Footscray VIC 3012 have submitted a limited notification statement
in support of their application for an assessment certificate for Polymer in HP Scitex Printer
Ink Series. The notified polymer is intended to be used as a component of UV-curable inkjet
printing inks. Up to 0.5 tonnes of the notified polymer will be imported per annum for each
of the first five years.
Hazard Classification
Based on the data provided the notified polymer is classified as hazardous according to the
Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)] with the
following risk phrases:

R38 Irritating to skin

R41 Risk of serious damage to eyes
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified polymer is not expected to pose a risk to
the environment.
Recommendations
Regulatory Controls
Hazard Classification and Labelling

Safe Work Australia, should consider the following health hazard classification for
the notified polymer:
 R38 Irritating to skin
 R41 Risk of serious damage to eyes

Use the following risk phrases for products/mixtures containing the notified polymer:
 conc. ≥ 20%: R41 Risk of serious damage to eyes; R38 Irritating to skin
 ≥ 10% conc. < 20%: R41 Risk of serious damage to eyes
 ≥ 5% conc. < 10%: R36 Irritating to eyes
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
21
Control Measures
Occupational Health and Safety

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified polymer as introduced in the
HP Scitex Printer Ink Series products:
 Avoid contact with skin and eyes

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is intended for use in ink jet printing inks at ≥ 1%; or
 products containing the notified polymer are intended for use by the public.
or
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
22
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from component of
industrial ink jet printing inks, or is likely to change significantly;
 the amount of the notified polymer being introduced has increased from 0.5 tonne,
or is likely to increase, significantly;
 the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the notified polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the notified polymer and products containing the notified polymer provided by
the notifier were reviewed by NICNAS. The accuracy of the information on the MSDS
remains the responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
23
9
PUBLICATION SUMMARY REPORT
Polymer in Disperbyk 167
Summary Report
Reference No: LTD/1468
Nuplex Industries (Aust) Pty Ltd (ABN 25 000 045 572) of 49-61 Stephen Road, Botany,
NSW 2019, PPG Industries Australia Pty Ltd (ABN 82 055 500 939) of Mc Naughton Road,
Clayton, VIC 3168, Hewlett Packard Australia Pty Ltd (ABN 74 004 394 763) of 353
Burwood Highway, Forest Hill, VIC 3131, and Australian Graphic Supplies Pty Ltd (ABN
81 082 517 691) of 1/38 Neumann Road, Capalaba QLD 4157 have submitted a limited
notification statement in support of their application for an assessment certificate for
Polymer in Disperbyk 167. The notified polymer is intended to be used as a polymeric
wetting and dispersing additive at <20% in industrial solvent-borne paints and pigment
concentrates and also at <5% as an additive in industrial printing inks for wide format
commercial printers. Up to ten tonnes of the notified polymer will be imported per annum
for each of the first five years.
Hazard Classification
Based on the limited data submitted, the notified polymer cannot be classified according to
the Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)].
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified polymer is not expected to pose a risk to
the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following engineering controls to minimise
occupational exposure to the notified polymer during preparation of coating
formulations, coating/spray applications, and printing:
 Local exhaust ventilation

Due to the limited toxicological data provided, employers should ensure that the
following personal protective equipment is used by workers to minimise occupational
exposure to the notified polymer during preparation of coating formulation,
coating/spray applications, and handling ink for printing:

Gloves
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
24


Goggles
Coveralls
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

Spray application should be carried out in accordance with the Safe Work Australia
National Guidance Materials for Spray Painting [NOHSC (1999)].

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from a component of industrial
coatings and industrial printing inks, or is likely to change significantly;
 the amount of polymer being introduced has increased more than 10 tonnes, or is
likely to increase, significantly;
 the polymer has begun to be manufactured in Australia;
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
25
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the notified polymer and products containing the notified chemical provided
by the notifier were reviewed by NICNAS. The accuracy of the information on the MSDS
remains the responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
26
10
PUBLICATION SUMMARY REPORT
Polymer in EPR Resin
Summary Report
Reference No: LTD/1478
DuPont (Australia) Ltd (ABN 59 000 716 469) of 7 Eden Park Drive, Macquarie Park NSW
2113 has submitted a limited notification statement in support of their application for an
assessment certificate for Polymer in EPR Resin. The notified polymer is intended to be used
as a component of automotive primer paint at concentrations up to 5%. Up to 10 tonnes of the
notified polymer will be imported per annum for each of the first five years.
Hazard Classification
Based on the limited data provided, the notified polymer cannot be classified according to the
Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)].
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the PEC/PNEC ratio and the reported use pattern, the notified polymer is not
expected to pose a risk to the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following
occupational exposure to the notified polymer:
 Automated and closed systems

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure during handling of the notified polymer:
 Gloves
 Protective clothing
engineering controls to minimise
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
27
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the polymer has a number-average molecular weight of less than 1000;
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from a component of automotive
paint at concentrations up to 5%, or is likely to change significantly;
 the amount of polymer being introduced has increased from 10 tonnes, or is likely
to increase, significantly;
 the polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
28
11
PUBLICATION SUMMARY REPORT
SYL-OFF® SL 9176 Anchorage Additive
Summary Report
Reference No: LTD/1485
Dow Corning Australia Pty Ltd (ABN 36 008 444 166) of Darling Park, Tower 2, Level 20,
201 Sussex Street, Sydney, NSW 2000, has submitted a limited notification statement in
support of their application for an assessment certificate for SYL-OFF® SL 9176 Anchorage
Additive. The notified polymer is intended to be used as a component of adhesive for paper
coating. Up to 10 tonnes of the notified polymer will be imported per annum for each of the
first five years.
Hazard Classification
Due to the lack of toxicity data/information, the notified polymer cannot be classified
according to the Approved Criteria for Classifying Hazardous Substances (NOHSC, 2004).
Based on the results of an analogue polymer, the notified polymer may be mutagenic and
based on structural alerts and a high percentage of low molecular weight species, may have
potential for irritation and/or sensitisation, reproductive effects and lung toxicity.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified polymer is not expected to pose a risk to
the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following engineering controls to minimise
occupational exposure to the notified polymer (as introduced at >90% concentration
and when using at <2% concentration):
 Enclosed, automated processes during reformulation
 Exhaust ventilation

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified polymer (as introduced at
>90% concentration and when using at <2% concentration):
 Avoid skin and eye contact
 Avoid inhalation of vapour
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
29

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified polymer (as introduced at
>90% concentration and when using at <2% concentration):
 Coveralls, gloves, goggles
 Respiratory protection (if exhaust ventilation is not available)
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the polymer has a number-average molecular weight of less than 1000;
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from a component of adhesive
used at work places for paper coating (at <2%) or is likely to change significantly;
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
30
 the amount of polymer being introduced has increased from 10 tonnes per annum,
or is likely to increase, significantly;
 the polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the notified polymer provided by the notifier was reviewed by NICNAS. The
accuracy of the information on the MSDS remains the responsibility of the applicant.
However, the hazard identifications section should be amended to read “Not Determined/no
test data” given the potential concerns of the notified polymer.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
31
12
PUBLICATION SUMMARY REPORT
Glycine, N-coco acyl derivs., sodium salts (INCI name: Sodium Cocoyl
Glycinate)
Summary Report
Reference No: LTD/1490
Clariant (Australia) Pty Ltd (ABN 30 069 435 552) of Brandon Office Park, Building 5, L2,
530-540 Springvale Road, Glen Waverley, VIC 3150 has submitted a limited notification
statement in support of their application for an assessment certificate for Glycine, N-coco
acyl derivs., sodium salts (INCI name: Sodium Cocoyl Glycinate). The notified chemical is
intended to be used as a surfactant that is used in rinse-off cosmetic products, such as body
and hair cleansing products, at < 5%. 1 tonne of the notified chemical will be imported per
annum for each of the first five years.
Hazard Classification
Based on the available data the notified chemical is classified as hazardous according to the
Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)] with the
following risk phrases:
 R38 Irritating to skin
 R41 Risk of serious damage to eyes
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified chemical is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified chemical is not considered to pose an
unacceptable risk to public health.
Environmental Risk assessment
On the basis of the PEC/PNEC ratio and the reported use pattern, the notified chemical is not
expected to pose a risk to the environment.
Recommendations
Regulatory Controls
Hazard Classification and Labelling

Safe Work Australia should consider the following health hazard classification for the
notified chemical:
 R38 Irritating to skin
 R41 Risk of serious damage to eyes

The following risk phrases are recommended in the workplace on products/mixtures
containing the notified chemical:
 ≥5% Concentration <10%: R36
 10% Concentration <20%: R41
 Concentration  20%: R38, R41
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
32

The notified chemical has previously been referred for scheduling in the Uniform
Scheduling of Medicines and Poisons (SUSMP) based on the results of skin and eye
irritation tests. A copy of this assessment report will be forwarded to the Advisory
Committee on Chemicals Scheduling to support the previous recommendation on
scheduling of this chemical.
Control Measures
Occupational Health and Safety

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified chemical as introduced and
formulating the consumer products:
 Avoid contact with skin and eyes

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified chemical as introduced and
formulating the consumer products:
 Protective eye wear such as goggles
 Impermeable gloves
 Coveralls
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified chemical are classified as hazardous
to health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Public Health

Consumer products containing the notified chemical at 5% should be labelled with a
warning against eye contact, and directions on first aid measures if the product
contacts the eyes (e.g. avoid contact with eyes, in case of contact with eyes, rinse
immediately with plenty of water and seek medical advice).
Disposal

The notified chemical should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified chemical should be handled by physical
containment, collection and subsequent safe disposal.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
33
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(2) of the Act; if
 the function or use of the chemical has changed from a surfactant that is used in
rinse-off cosmetic products ≤ 5%, or is likely to change significantly;
 the amount of chemical being introduced has increased from 1 tonne per year, or
is likely to increase, significantly;
 the chemical has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
No additional secondary notification conditions are stipulated.
Material Safety Data Sheet
The MSDS of the product containing the notified chemical provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
34
13
PUBLICATION SUMMARY REPORT
Polymer in RE-89-8919
Summary Report
Reference No: LTD/1491
PPG Industries Australia Pty Ltd (ABN 82 055 500 939) of McNaughton Road Clayton VIC
3168 has submitted a limited notification statement in support of their application for an
assessment certificate for Polymer in RE-89-8919. The notified polymer is intended to be
used as a component (< 30%) of a two-pack system for the coating of large sea vessels and
onshore and offshore metal structures. Up to 30 tonnes of the notified polymer will be
imported per annum for each of the first five years.
Hazard Classification
Based on the limited information provided, the notified polymer is not classified as hazardous
according to the Approved Criteria for Classifying Hazardous Substances
[NOHSC:1008(2004)].
Human Health Risk Assessment
Under the conditions of the occupational settings described and with adequate controls to
reduce exposure, the notified polymer is not considered to pose an unacceptable risk to the
health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified polymer is not expected to pose a risk to
the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following engineering controls to minimise
occupational exposure to the notified polymer:
 Use under well-ventilated conditions

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified polymer:
 Avoid contact with eyes and skin
 Avoid inhalation of aerosols during spray application
 Spray application of paint containing the notified polymer should be in
accordance with the National Guidance Material for Spray Painting (NOHSC,
1999)
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
35

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified polymer during mixing
operations (< 30%):
 Safety glasses
 Gloves
 Overalls

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified polymer during spray
application (< 18%):
 Suitable respiratory protection
 Safety glasses
 Gloves
 Overalls
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified chemical should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
36
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the polymer has a number-average molecular weight of less than 1000;
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from component of an industrial
coating system at < 30% for large sea vessels and onshore and offshore metal
structures, or is likely to change significantly;
 the amount of polymer being introduced has increased from 30 tonnes per annum,
or is likely to increase, significantly;
 the polymer has begun to be manufactured in Australia;
 the method of manufacture of the polymer in Australia has changed, or is likely to
change, in a way that may result in an increased risk of an adverse effect of the
polymer on occupational health and safety, public health, or the environment;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
37
14
PUBLICATION SUMMARY REPORT
Starch Copolymer in Poroseal
Summary Report
Reference No: LTD/1492
M-I Australia Pty Ltd (ABN 67 009 214 162) of 11/251 Adelaide Terrace, Perth WA 6000
has submitted a limited notification statement in support of their application for an
assessment certificate for Starch Copolymer in Poroseal. The notified polymer is intended to
be used as an additive for water-based drilling fluids in offshore oil and gas drilling
operations. Up to 300 tonnes of the notified polymer will be imported per annum for each of
the first five years.
Hazard Classification
Based on the available data, the notified polymer cannot be classified as hazardous according
to the Approved Criteria for Classifying Hazardous Substances (NOHSC, 2004).
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on its reported use pattern and low toxicity to marine biota, the notified polymer is not
considered to pose a risk to the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified polymer as imported at 40-50%
concentration in the product Starch Copolymer in Poroseal:
 Local exhaust ventilation

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified polymer as imported at 4050% concentration in the product Starch Copolymer in Poroseal and during use at
concentration of ≤5%:
 Safety gloves
 Safety glasses
 Overalls
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
38

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified chemical are classified as hazardous
to health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the polymer is intended to be introduced in powder form
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from drilling fluid additive at
concentrations ≤5% for use in offshore oil and gas drilling operations, or is likely
to change significantly;
 the amount of polymer being introduced has increased from 300 tonnes, or is
likely to increase, significantly;
 the polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
39
Material Safety Data Sheet
The MSDS of a product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
40
15
PUBLICATION SUMMARY REPORT
CIM-17
Summary Report
Reference No: LTD/1494
Canon Australia Pty Ltd. (ABN 66 005 002 951) of 1 Thomas Holt Drive, North Ryde NSW
2113 has submitted a limited notification statement in support of their application for an
assessment certificate for CIM-17. The notified chemical is intended to be used as an ink
component at < 7% in sealed ink cartridges for use in inkjet printers. Up to 1 tonne of the
notified chemical will be imported per annum for each of the first five years.
Hazard Classification
Based on the limited data provided, the notified chemical cannot be classified according to
the Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)].
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified chemical is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified chemical is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified chemical is not expected to pose a risk to
the environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified chemical itself, however, these should be
selected on the basis of all ingredients in the formulation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified chemical are classified as hazardous
to health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
41
Disposal

The notified chemical should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified chemical should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(2) of the Act; if
 the function or use of the chemical has changed from an ink component
introduced at < 7% in sealed ink cartridges for use in inkjet printers, or is likely to
change significantly;
 the amount of chemical being introduced has increased from 1 tonne per year, or
is likely to increase, significantly;
 the chemical has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
No additional secondary notification conditions are stipulated.
Material Safety Data Sheet
The MSDS of the product containing the notified chemical provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
42
16
PUBLICATION SUMMARY REPORT
Isocyanate Polymer in Pur-Fect Lok 91-834A
Summary Report
Reference No: LTD/1495
Henkel Australia Pty Ltd (ABN: 82 001 302 996) of 135-141 Canterbury Road Kilsyth VIC
3137 has submitted a limited notification statement in support of their application for an
assessment certificate for Isocyanate Polymer in Pur-Fect Lok 91-834A. The notified
polymer is intended to be used as a component of hot melt adhesive (> 65% concentration)
for use in laminating/bonding of sandwich panels for caravans. Up to 20 tonnes of the
notified polymer will be imported per annum for each of the first five years.
Hazard Classification
Based on the available information the notified polymer is classified as hazardous according
to the Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)], with
the following risk phrase:
 Xn; R42 May cause sensitisation by inhalation
Human Health Risk Assessment
Under the conditions of the occupational settings described where sufficient controls are in
place to minimise inhalation exposure when necessary, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified polymer is not expected to pose a risk to
the environment.
Recommendations
Regulatory Controls
Hazard Classification and Labelling

Safe Work Australia, should consider the following health hazard classification for
the notified polymer:
 Conc ≥ 1%: R42 may cause sensitisation by inhalation
Health Surveillance

As the notified polymer contains isocyanate functional groups, employers should
carry out health surveillance for any worker who has been identified in the workplace
risk assessment as having a history of isocyanate sensitivity, asthma or other
pulmonary condition and who may be adversely affected by isocyanate exposure.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
43
Control Measures
Occupational Health and Safety

Employers should implement the following isolation and engineering controls to
minimise occupational exposure to the notified polymer during application/use:
 Ventilation system including local exhaust ventilation during application, and
good general ventilation during curing.
 Automated processes and closed systems, where possible.

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified polymer:
 Keep containers securely sealed and check regularly for spills and leaks.
 Avoid inhalation of vapours, mists and aerosols.
 Avoid contact with skin and eyes.

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified polymers:
 Isocyanate-resistant gloves
 Overalls
 Safety glasses
 Appropriately fitted air-line respirators or self-contained breathing apparatus
complying with the relevant Australian Standard for cleaning and maintenance
workers, or in other circumstances when inhalation exposure may occur.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

Atmospheric monitoring should be conducted to measure workplace concentrations of
volatile adhesive components during use of the notified polymer. Employers should
ensure that the exposure standard for isocyanates [NOHSC: 1003(1995)] is not
exceeded for all areas of the adhesive application site.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified polymer should be disposed of to landfill.
Storage

The following precautions should be taken regarding storage of the notified polymer:
 Check all containers against leakage and ensure lids and caps are tightly sealed
 Store in a ventilated area.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
44
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the polymer has a number-average molecular weight of less than 1000;
 the polymer is used in a process where aerosols are formed;
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from a component of industrial hot
melt adhesive (< 65% concentration) for use in laminating/bonding, or is likely to
change significantly;
 the amount of polymer being introduced has increased from 20 tonnes per annum,
or is likely to increase, significantly;
 the polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of a product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
45
17
PUBLICATION SUMMARY REPORT
Beckopox® EH 613w/80WA
Summary Report
Reference No: LTD/1497
Cytec Australia Holdings (ABN: 45 081 148 629) of Suite 1, Level 1 Norwest Quay, 21
Solent Circuit, Norwest Business Park, Baulkham Hills, NSW 2153 has submitted a limited
notification statement in support of their application for an assessment certificate for Polymer
in Beckopox® EH 613w/80WA. The notified polymer is intended to be used as a component
of industrial primer coatings for metal and concrete structures. Up to 100 tonnes of the
notified polymer will be imported per annum for each of the first five years.
Hazard Classification
As no toxicity data were provided for the notified polymer, it cannot be classified according
to the Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004)].
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the reported use pattern, the notified polymer is not expected to pose a risk to
the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following engineering controls to minimise
occupational exposure to the notified polymer (as introduced at <70% and as diluted
for use at ≤30%):
 Enclosed, automated processes during blending
 Spray booths during application

Due to the presence of residual monomers, employers should implement the following
safe work practices to minimise occupational exposure during handling of the notified
polymer (as introduced at <70% and as diluted for use at ≤30%):
 Avoid skin and eye contact
 Avoid inhalation of aerosols during blending and spray application
 Outdoor spray applications should not be conducted in strong winds

Due to the presence of residual monomers, employers should ensure that the
following personal protective equipment is used by workers to minimise occupational
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
46
exposure to the notified polymer (as introduced at <70% and as diluted for use at
≤30%):
 Coveralls, gloves, goggles
 Respiratory protection during outdoor spray application, if there is a possibility of
inhaling aerosols
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

Spray applications should be carried out in accordance with the Safe Work Australia
National Guidance Material for Spray Painting [NOHSC (1999)] or relevant State
and Territory Codes of Practice.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the polymer has a number-average molecular weight of less than 1000;
or
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
47
(2)
Under Section 64(2) of the Act; if
 the function or use of the polymer has changed from a component of industrial
primer coatings for metal and concrete structures (at ≤30%), or is likely to change
significantly;
 the amount of polymer being introduced has increased from 100 tonnes, or is
likely to increase, significantly;
 the polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
No additional secondary notification conditions are stipulated.
Material Safety Data Sheet
The MSDS of a product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The additional risk and safety phrases assigned based on the
concentration of hazardous impurities/residual monomers were noted. The accuracy of the
information on the MSDS remains the responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
48
18
PUBLICATION SUMMARY REPORT
Alpha Glucosyl Hesperidin
Summary Report
Reference No: STD/1374
Hayashibara International Australia Pty Limited (ABN 61 120 127 488) of Level 31 RBS
Tower, 88 Phillip Street, Sydney NSW 2000 has submitted a standard notification statement
in support of their application for an assessment certificate for Alpha Glucosyl Hesperidin.
The notified chemical is intended to be used as a component of cosmetic products and bath
salts at a level of up to 5%. Up to 5 tonnes of the notified chemical will be imported per
annum for each of the first five years.
Hazard Classification
Based on the data provided the notified chemical is not classified as hazardous according to
the Approved Criteria for Classifying Hazardous Substances (NOHSC, 2004).
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified chemical is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified chemical is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
On the basis of the PEC/PNEC ratio and the reported use pattern, the notified chemical is not
expected to pose a risk to the environment.
Recommendations
Control Measures
Occupational Health and Safety

Employers should implement the following engineering controls to minimise
occupational exposure to the notified chemical as introduced:
 Local exhaust ventilation

Employers should implement the following safe work practices to minimise
occupational exposure during handling of the notified chemical as introduced:
 Avoid skin and eye contact
 Avoid inhalation of dusts

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure during handling of the notified chemical
for formulation of products:
 Respiratory protection (i.e. dust masks)
 Gloves
 Overalls
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
49
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified chemical are classified as hazardous
to health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)] workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Disposal

The notified chemical should be disposed of to landfill.
Emergency procedures

Spills or accidental release of the notified chemical should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the chemical under secondary notification
provisions based on changes in certain circumstances. Under Section 64 of the Industrial
Chemicals (Notification and Assessment) Act (1989) the notifier, as well as any other
importer or manufacturer of the notified chemical, have post-assessment regulatory
obligations to notify NICNAS when any of these circumstances change. These obligations
apply even when the notified chemical is listed on the Australian Inventory of Chemical
Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(2) of the Act; if
 the function or use of the notified chemical has changed from a component of
cosmetic products and bath salts at a level of up to 5%, or is likely to change
significantly;
 the amount of chemical being introduced has increased from 5 tonnes, or is likely
to increase, significantly;
 the chemical has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
50
No additional secondary notification conditions are stipulated.
Material Safety Data Sheet
The MSDS of the notified chemical provided by the notifier was reviewed by NICNAS. The
accuracy of the information on the MSDS remains the responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
51
19
PUBLICATION SUMMARY REPORT
Polymer in TN615-Series Toner
Summary Report
Reference No: PLC/927
Konica Minolta Business Solutions Australia Pty Ltd (ABN: 50 001 065 096) of 4 Drake
Avenue, Macquarie Park, NSW 2113 has submitted a polymer of low concern (PLC)
notification statement in support of their application for an assessment certificate for
Polymer in TN615-Series Toner. The notified polymer is intended to be used as a component
of toner in sealed cartridges for photocopiers. Up to 50 tonnes of the notified polymer will be
imported per annum for each of the first five years.
Hazard Classification
No toxicological data were submitted. The notified polymer meets the PLC criteria and can
therefore be considered to be of low hazard.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not considered to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer in sealed toner cartridges. However,
these should be selected on the basis of all ingredients in the formulation.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
52
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
 the notified polymer is introduced with a particle size of 100 nm or less.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a component of toner
in sealed cartridges for photocopiers or is likely to change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the notified polymer has begun to be manufactured or reformulated in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the notified polymer (and products containing the notified polymer) provided
by the notifier were reviewed by NICNAS. The accuracy of the information on the MSDS
remains the responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
53
20
PUBLICATION SUMMARY REPORT
Polymer in 5698 Series Oleoresinous Coatings
Summary Report
Reference No: PLC/937
The Valspar (Australia) Corporation Pty Limited (ABN 82 000 039 396) of 203 Power
Street, Glendenning, NSW 2761 has submitted a polymer of low concern (PLC) notification
statement in support of their application for an assessment certificate for Polymer in 5698
Series Oleoresinous Coatings. The notified polymer is intended to be used as a component of
can coatings. Up to 3 tonnes of the notified polymer will be imported per annum for each of
the first five years.
Hazard Classification
No toxicological data were submitted. The notified polymer meets the PLC criteria and can
therefore be considered to be of low hazard.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not expected to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself, however, these should be
selected on the basis of all ingredients in the formulation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
54
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a component of
surface coatings, or is likely to change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of a product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
55
21
PUBLICATION SUMMARY REPORT
Polymer in RC-49125
Summary Report
Reference No: PLC/938
DuPont (Australia) Ltd (ABN 59 000 716 469) of 7 Eden Park Drive, Macquarie Park, NSW
2113 has submitted a polymer of low concern (PLC) notification statement in support of their
application for an assessment certificate for Polymer in RC-49125. The notified polymer is
intended to be used as a component of automotive refinish paints. Up to 10 tonnes of the
notified polymer will be imported per annum for each of the first five years.
Hazard Classification
No toxicological data were submitted. The notified polymer meets the PLC criteria and can
therefore be considered to be of low hazard.
Human Health Risk Assessment
Based on the information provided, the notified polymer is expected to be of low risk to
human health and the environment.
Recommendations
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself. However, these should be
selected on the basis of all ingredients in the formulation.

Spray applications should be carried out in accordance with the Safe Work Australia
National Guidance Material for Spray Painting [NOHSC (1999)] or relevant State
and Territory Codes of Practice.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.
Disposal

The notified polymer should be disposed of to landfill.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
56
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a component of
automotive refinish paints, or is likely to change significantly;
 the amount of notified polymer being introduced has increased from 10 tonnes per
annum, or is likely to increase, significantly;
 the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of products containing the notified polymer provided by the notifier were
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
57
22
PUBLICATION SUMMARY REPORT
Polymer in Uralac SN865 S2-75 ND
Summary Report
Reference No: PLC/949
Reschem Technologies Pty Ltd (ABN 90 315 656 219) of 6/56 Kalang Road, Elanora
Heights, NSW 2101 has submitted a polymer of low concern (PLC) notification statement in
support of their application for an assessment certificate for Polymer in Uralac SN865 S2-75
ND. The notified polymer is intended to be used as a component of coatings for metal coils.
Up to 600 tonnes of the notified polymer will be imported per annum for each of the first five
years.
Hazard Classification
No toxicological data were submitted. The notified polymer meets the PLC criteria and can
therefore be considered to be of low hazard.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not expected to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself, however, these should be
selected on the basis of all ingredients in the formulation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
58
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a component of
industrial surface coatings, or is likely to change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of products containing the notified polymer provided by the notifier were
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
59
23
PUBLICATION SUMMARY REPORT
Polymer in Estarez 7265 Base
Summary Report
Reference No: PLC/951
Nuplex Industries (Aust) Pty Ltd (ABN 25 000 045 572) of 49-61 Stephen Road, Botany,
NSW 2019 has submitted a polymer of low concern (PLC) notification statement in support
of their application for an assessment certificate for Polymer in Estarez 7265 Base. The
notified polymer is intended to be used as a component of composite for use in the
automotive panel and paint industry. Up to 500 tonnes of the notified polymer will be
imported per annum for each of the first five years.
Hazard Classification
No toxicological data were submitted. The notified polymer meets the PLC criteria and can
therefore be considered to be of low hazard.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not expected to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself. However, these should be
selected on the basis of all ingredients in the formulation.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
60
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a component of
composite for use in the automotive panel and paint industry, or is likely to
change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the method of manufacture of the notified polymer in Australia has changed, or is
likely to change, in a way that may result in an increased risk of an adverse effect
of the notified polymer on occupational health and safety, public health, or the
environment;
 additional information has become available to the person as to an adverse effect
of the polymer on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
61
Material Safety Data Sheet
The MSDS of a product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
62
24
PUBLICATION SUMMARY REPORT
Polymer in Additol VXW 6360
Summary Report
Reference No: PLC/954
Cytec Australia Holdings Pty Ltd (ABN: 45 081 148 629) of Suite 1, Level 1 Norwest Quay,
21 Solent Circuit, Norwest Business Park, Baulkham Hills NSW 2153 has submitted a
polymer of low concern (PLC) notification statement in support of their application for an
assessment certificate for Polymer in Additol VXW 6360. Additol VXW 6360 containing <
40% notified polymer is a water dilutable urethane modified polyether additive and will be
used as a thickener in the formulation of industrial coatings (< 2%). The coatings will be
applied to concrete in both flooring and maintenance applications by brush or spray. Up to 25
tonnes of the notified polymer will be imported per annum for each of the first five years.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not expected to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself, however, these should be
selected on the basis of all ingredients in the formulation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

Spray application should be carried out in accordance with the National Guidance
Material for Spray Painting.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
63
Disposal

The notified polymer should be disposed of to landfill
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
 The notified polymer is introduced in a powder form.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from component of
industrial coatings, or is likely to change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
64
25
PUBLICATION SUMMARY REPORT
Polymer in Viamin HP 366/601BE
Summary Report
Reference No: PLC/955
Cytec Australia Holdings Pty Ltd (ABN: 45 081 148 629) of Suite 1, Level 1 Norwest Quay,
21 Solent Circuit, Norwest Business Park, Baulkham Hills NSW 2153 has submitted a
polymer of low concern (PLC) notification statement in support of their application for an
assessment certificate for Polymer in Viamin HP 366/601BE. Viamin HP 366/601BE
containing the notified polymer at up to 70% will be used in the manufacture of acid cured
coatings for floors and furniture. The finished coatings will contain the notified polymer at up
to 50%. Up to 100 tonnes of the notified polymer will be imported per annum for each of the
first five years.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not expected to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself, however, these should be
selected on the basis of all ingredients in the formulation.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

Spray application should be carried out in accordance with the National Guidance
Material for Spray Painting.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
65
Disposal

The notified polymer should be disposed of to landfill
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
 The notified polymer is introduced in a powder form.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from component of
industrial coatings, or is likely to change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
66
26
PUBLICATION SUMMARY REPORT
Polymer in F61063
Summary Report
Reference No: PLC/957
Nuplex Industries (Aust) Pty Ltd (ABN 25 000 045 572) of 49-61 Stephen Road, Botany,
NSW 2019 has submitted a polymer of low concern (PLC) notification statement in support
of their application for an assessment certificate for Polymer in F61063. The notified polymer
is intended to be used as a component of resin products for use in the fibreglass industry. Up
to 100 tonnes of the notified polymer will be imported per annum for each of the first five
years.
Hazard Classification
No toxicological data were submitted. The notified polymer meets the PLC criteria and can
therefore be considered to be of low hazard.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not expected to pose a risk to the
environment.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself. However, these should be
selected on the basis of all ingredients in the formulation.

Spray applications should be carried out in accordance with the Safe Work Australia
National Guidance Material for Spray Painting [NOHSC (1999)] or relevant State
and Territory Codes of Practice.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
67
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.
Disposal

The notified polymer should be disposed of to landfill.
Emergency procedures

Spills and/or accidental release of the notified polymer should be handled by physical
containment, collection and subsequent safe disposal.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a component of resin
products for use in the fibreglass industry, or is likely to change significantly;
 the amount of notified polymer being introduced has increased, or is likely to
increase, significantly;
 the method of manufacture of the notified polymer in Australia has changed, or is
likely to change, in a way that may result in an increased risk of an adverse effect
of the notified polymer on occupational health and safety, public health, or the
environment;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
68
Material Safety Data Sheet
The MSDS of a product containing the notified polymer provided by the notifier was
reviewed by NICNAS. The accuracy of the information on the MSDS remains the
responsibility of the applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
69
27
PUBLICATION SUMMARY REPORT
Quinone Methide in IRGASTAB® UV 22
Summary Report
Reference No: EX/140
Ciba Specialty Chemicals Pty Ltd (ABN 97 005 061 469) of 235 Settlement Road,
Thomastown VIC 3074 (currently BASF Australia Ltd of Level 12, 28 Freshwater Place,
Southbank VIC 3006) has submitted a limited notification statement in support of their
application for an assessment certificate for Quinone Methide in IRGASTAB® UV 22. The
notified chemical is intended to be used as a stabiliser for UV curable inks and varnishes.
Less than 1 tonne of the notified chemical will be imported per annum for each of the first
five years.
Since the assessment certificate has been granted for the above notified chemical, HewlettPackard Australia Pty Ltd (ABN 74 004 394 763) of 353 Burwood Highway, Forest Hill
VIC 3131 has submitted an application for extension of the original assessment certificate
(No. 2466, LTD/1295), together with a written agreement of the holder of the original
certificate (BASF Australia Ltd) for importing less than 100 kilograms of the notified
chemical per annum. The notified chemical will be used as a stabiliser for inkjet printing ink
products.
Hazard Assessment
Based on the available data the notified chemical is classified as hazardous under the NOHSC
Approved Criteria for Classifying Hazardous Substances. The classification and labelling
details are:

R43: May cause sensitisation by skin contact
Occupational Health and Safety
There is High Concern to occupational health and safety under the conditions of the
occupational settings described.
Public Health
There is No Significant Concern to public health when used as described.
Environmental Effects
The chemical is not considered to pose a risk to the environment based on its reported use
pattern.
Risk assessment and recommendations relating to extension application
The proposed use, introduction volume and fate of the notified chemical will not change
significantly under the proposed extension. NICNAS notes that there is no reformulation with
the extension application as compared to the original application. It is also noted that the
extension use will be at <1% in finished products as compared to up to 0.4% in original
application use. However, the risk of allergic dermatitis is low given that the ink containing
the notified chemical at <1% would not be classified as a skin sensitiser according to the
NOHSC Approved criteria. Therefore, the circumstances in the extension application are not
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
70
expected to change significantly the original human health and environmental risk
assessment. As a result, there are no changes required in the existing risk assessment and
recommendations.
Recommendations
Regulatory Controls
Hazard Classification and Labelling

The Office of the ASCC, Department of Employment and Workplace Relations
(DEWR), should consider the following hazard classification for the notified
chemical:
 R43: May cause sensitisation by skin contact

Use the following risk phrases for products/mixtures containing the notified chemical:
 > 1%: R43: May cause sensitisation by skin contact
Control Measures
Occupational Health and Safety

Employers should implement the following engineering controls to minimise
occupational exposure to the notified chemical as introduced:
 Pumps and lines which limit the release of the imported formulation should be
considered for use in transfers to mixers.

Employers should ensure that the following personal protective equipment is used by
workers to minimise occupational exposure to the notified chemical as introduced:
 Impervious gloves, overalls and face shield or chemical safety goggles.
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified chemical are classified as hazardous
to health in accordance with the NOHSC Approved Criteria for Classifying
Hazardous Substances, workplace practices and control procedures consistent with
provisions of State and Territory hazardous substances legislation must be in
operation.
Disposal

The notified chemical should be disposed of by incineration or to landfill.
Emergency procedures

Spills or accidental release of the notified chemical should be handled by physical
containment, collection and subsequent safe disposal.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
71
Secondary Notification
The Director of Chemicals Notification and Assessment must be notified in writing within 28
days by the notifier, other importer or manufacturer:
(1)
Under Section 64(2) of the Act:
 if any of the circumstances listed in the subsection arise.
The Director will then decide whether secondary notification is required.
No additional secondary notification conditions are stipulated.
Material Safety Data Sheet
The MSDS of IRGASTAB® UV 22 provided by the notifier was in accordance with the
NOHSC National Code of Practice for the Preparation of Material Safety Data Sheets
(NOHSC, 2003). It is published here as a matter of public record. The accuracy of the
information on the MSDS remains the responsibility of the applicant.
Extension Application:
The applicant for the extension application has provided an MSDS of a product containing
the notified chemical. The accuracy of the information on the MSDS remains the
responsibility of the extension applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
72
28
PUBLICATION SUMMARY REPORT
Polymer in Mobil Delvac 1 ESP 5W-40
Summary Report
Reference No: EX/158
Mobil Oil Australia Pty Ltd (ABN 88 004 052 984) of 29 Francis street, Yarraville VIC 3013
has submitted a polymer of low concern (PLC) notification statement in support of their
application for an assessment certificate for Polymer in Mobil Delvac 1 ESP 5W-40. The
notified polymer is intended to be used as a lubricant component in engine oil at < 7% w/w.
Up to 50 tonnes of the notified polymer will be imported per annum for each of the first five
years.
Caterpillar SARL (Singapore Branch) [Trading as Caterpillar of Australia Pty Ltd] (ABN 99
539 336 318) of 1 Caterpillar Drive, Tullamarine, VIC 3043 and Caterpillar Underground
Mining Pty Ltd (ABN 69 069 652 866) of 2-8 Hopkinson St, South Burnie, TAS 7320 have
submitted an application for extension of the assessment certificate, together with a written
agreement of the holder of the original certificate, Mobil Oil Australia Pty Ltd for importing
up to 3 tonnes of the notified polymer per annum for use as part of finished engine oils at
< 7% w/w.
Human Health Risk Assessment
Under the conditions of the occupational settings described, the notified polymer is not
considered to pose an unacceptable risk to the health of workers.
When used in the proposed manner, the notified polymer is not considered to pose an
unacceptable risk to public health.
Environmental Risk Assessment
Based on the reported use pattern, the notified polymer is not considered to pose a risk to the
environment.
Risk assessment and recommendations relating to the extension application
The proposed use, introduction volume and fate of the notified polymer will not change
significantly under the proposed extension. Under the extension application product
containing the notified polymer will not be available for public use. The circumstances in the
extension application are not expected to impact on the original human health and
environmental risk assessment and recommendations.
Recommendations
Control Measures
Occupational Health and Safety

No specific engineering controls, work practices or personal protective equipment are
required for the safe use of the notified polymer itself, however, these should be
selected on the basis of all ingredients in the formulation.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
73
Guidance in selection of personal protective equipment can be obtained from Australian,
Australian/New Zealand or other approved standards.

A copy of the MSDS should be easily accessible to employees.

If products and mixtures containing the notified polymer are classified as hazardous to
health in accordance with the Approved Criteria for Classifying Hazardous
Substances [NOHSC:1008(2004)], workplace practices and control procedures
consistent with provisions of State and Territory hazardous substances legislation
must be in operation.
Environment

The following control measures should be implemented by the customers’ site to
minimise environmental exposure during use of the notified polymer:
 Bunding
Disposal

The notified polymer should be disposed of by supervised incineration at very high
temperatures to prevent formation of undesirable combustion products. Accidental
leaks and spillage should be cleaned up promptly with absorbent material and put into
containers for disposal. The empty drums and their residues should be disposed in
accordance with government regulations.
Emergency procedures

Spills/release of the notified polymer should be handled by recovery and/or
confinement of spills where possible:

For small land spills, absorb with earth, sand or other non-combustible material
and transfer to containers for later disposal. If liquid is too viscous for pumping,
shovel it up into a suitable container for recycle or disposal.

For water spills, confine spill immediately with booms. Warn other shipping.
Remove from the surface by skimming or with suitable absorbent. Report spills
as required to appropriate authorities.
Regulatory Obligations
Secondary Notification
This risk assessment is based on the information available at the time of notification. The
Director may call for the reassessment of the polymer under secondary notification provisions
based on changes in certain circumstances. Under Section 64 of the Industrial Chemicals
(Notification and Assessment) Act (1989) the notifier, as well as any other importer or
manufacturer of the notified polymer, have post-assessment regulatory obligations to notify
NICNAS when any of these circumstances change. These obligations apply even when the
notified polymer is listed on the Australian Inventory of Chemical Substances (AICS).
Therefore, the Director of NICNAS must be notified in writing within 28 days by the notifier,
other importer or manufacturer:
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
74
(1)
Under Section 64(1) of the Act; if
 the notified polymer is introduced in a chemical form that does not meet the PLC
criteria.
or
(2)
Under Section 64(2) of the Act; if
 the function or use of the notified polymer has changed from a lubricant
component in engine oil at < 7% w/w, or is likely to change significantly;
 the amount of notified polymer being introduced has increased from 50 tonnes, or
is likely to increase, significantly;
 if the notified polymer has begun to be manufactured in Australia;
 additional information has become available to the person as to an adverse effect
of the chemical on occupational health and safety, public health, or the
environment.
The Director will then decide whether a reassessment (i.e. a secondary notification and
assessment) is required.
Material Safety Data Sheet
The MSDS of the notified polymer and products containing the notified polymer provided by
the notifier were reviewed by NICNAS. The accuracy of the information on the MSDS
remains the responsibility of the applicant.
Extension Application:
The applicant for extension application has provided an MSDS of a product containing the
notified polymer. The accuracy of the information on the MSDS remains the responsibility of
the extension applicant.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
75
29
ACCESS TO FULL PUBLIC REPORT
NICNAS publishes a Full Public Report for each new chemical assessed. These reports
are available for inspection at our NICNAS office by appointment only at 260 Elizabeth
St Surry Hills NSW 2010.
Reports can also be viewed and downloaded free of charge from our website at
http://www.nicnas.gov.au/. Copies of these reports may also be requested, free of charge,
by contacting the Administration Section of NICNAS by phone: (02) 8577 8800 or fax:
(02) 8577 8888.
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
76
30
EARLY INTRODUCTION PERMITS FOR NON-HAZARDOUS INDUSTRIAL
CHEMICALS
The permits listed in Table 1 were issued to import or manufacture the following chemicals
prior to the issue of their respective assessment certificates under section 30A of the Act.
Table 1
Early Introduction Permits
PERMIT
NUMBER
COMPANY
NAME
CHEMICAL OR
TRADE NAME
USE
712
Canon
Australia Pty
Ltd
Polymer WHL-701
Component of printer ink
713
Cognis
Australia Pty
Ltd
Chemical in ProEco HE
801 Series Oils
Component of finished automotive
and industrial oils
714
Cytec
Australia
Holdings Pty
Limited
Polymer in Macrynal
SM 506
Component of car refinish and
industrial coatings
715
Canon
Australia Pty
Ltd
Polymer CIM-16
Component of printer ink
716
Orica
Australia Pty
Ltd
HPA 100
Component of car, body putties and
composite resins
718
Reschem
Technologies
Pty Ltd
Polymer in Neo-Rez R2180
Component of resin coating system
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
77
31
LOW VOLUME CATEGORY PERMITS
The permits listed in Table 2 were issued to import or manufacture the following chemicals
under section 21U of the Industrial Chemicals (Notification and Assessment) Act 1989. Low
Volume Category Permits are approved for 36 months.
Table 2
Low Volume Category Permits
PERMIT
NUMBER
COMPANY
NAME
COMPANY
POSTCODE
CHEMICAL OR TRADE
NAME
912
Roland DG
Australia Pty
Ltd
2086
2-Propenoic acid,
phenylmethyl ester
Estee Lauder
Pty Ltd
2018
913
HAZARDOUS
SUBSTANCE
Yes
RODAL DHMP
ND
USE
Component
of printing
ink
Hair dye
ingredient
N.D.: not determined; insufficient data available to effect a health effects classification under Approved Criteria
[NOHSC:1008(2004)]
Low hazardous: Meets criteria prescribed under the Industrial Chemicals (Notification and Assessment) Regulation
1990
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
78
32
NOTICE OF CHEMICALS ELIGIBLE FOR LISTING ON THE AUSTRALIAN
INVENTORY OF CHEMICAL SUBSTANCES FIVE YEARS AFTER ISSUING OF
ASSESSMENT CERTIFICATES
Notice is given in accordance with section 14(1) of the Industrial Chemicals (Notification
and Assessment) Act 1989, that the following chemicals have been added to the Australian
Inventory of Chemical Substances.
Table 3
Chemicals Eligible for Listing on the Australian Inventory of Chemical Substances
CHEMICAL NAME
Propanoic acid, 2-hydroxy-, ion(1-), (2S)-,
salts with 2-ethyl-1-hexanol-blocked
bisphenol A-2-(dimethylamino)ethanolepichlorohydrin-TDI polymer 2ethylhexanoate (ester)
Phenol, 4,4’-(1-methylethylidene)bis-,
polymer with 2-(chloromethyl)oxirane, 1,1’methylenebis[4-isocyanatobenzene], and
.alpha.,.alpha.’-[(1-methylethylidene)di-4,1phenylene]bis[.omega.-hydroxypoly(oxy1,2-ethanediyl)], 2-ethylhexanoate (ester),
reaction products with N1-(1,3dimethylbutylidene)-N2-[2-[(1,3dimethylbutylidene)amino]ethyl]-1,2ethanediamine and 2-(methylamino)ethanol,
acetates (salts)
2-Propenoic acid, telomer with sodium 2methyl-2-[(1-oxo-2-propen-1-yl)amino]-1propanesulfonate (1:1) and sodium Pphenylphosphinate (1:1)
2-Propenoic acid, 2-methyl-, 2-ethylhexyl
ester, polymer with butyl 2-propenoate, 4hydroxybutyl 2-propenoate, 2-hydroxyethyl
2-methyl-2-propenoate phosphate, methyl
2-methyl-2-propenoate, 1,2-propanediol
mono-2-propenoate and 2-propenoic acid,
2,2’-(1,2-diazinediyl)bis[2,4dimethylpentanenitrile]-initiated
Fatty acids, C8-18 and C18-unsatd.,
polymers with benzoic acid, pentaerythritol,
phthalic anhydride and trimethylolpropane
Hexanedioic acid, polymer with 1,2ethanediol, 3-hydroxy-2-(hydroxymethyl)2-methylpropanoic acid and 1,1'methylenebis[4-isocyanatocyclohexane]
Oxirane, methyl-, polymer with oxirane,
dimethyl ether
Chemical Gazette
MOLECULAR FORMULA
CAS
NUMBER
Unspecified
1247059-43-3
Unspecified
1247060-27-0
(C7H13NO4S.C3H4O2Na)x.C6
H7O2P.Na
1248366-65-5
Unspecified
1247062-03-8
(C8H4O3.C7H6O2.C6H14O3.C5
H12O4.Unspecified)x
121758-86-9
(C15H22N2O2.C6H10O4.C5H10
O4.C2H6O2)x
68003-08-7
(C3H6O.C2H4O)x.2CH4O
61419-46-3
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
79
Formaldehyde, reaction products with
ethylenediamine and isobutylenated phenol
1-Octanaminium, N,N,N-trimethyl-,
dimethyl phosphate (1:1)
2-Propenoic acid, 2-methyl, 2-methylpropyl
ester, polymer with butyl 2-propenoate,
ethenylbenzene, 2-hydroxyethyl 2propenoate, oxiranylmethyl 2-methyl-2propenoate and rel-(1R, 2R, 4R)-1,7,7trimethylbicyclo[2.2.1]hept-2-yl 2propenoate, bis (1,1-dimethylpropyl)
peroxide- and 1,1-dimethylpropyl 2ethylhexaneperoxoate-initiated.
Undecanedioic acid
Ethanesulfonic acid, 2,2'-[1,3phenylenebis[imino[6-[bis(2hydroxyethyl)amino]-1,3,5-triazine-4,2diyl]imino]]bis-, sodium salt (1:2)
Benzenesulfonic acid, 2,2'-(1,2ethenediyl)bis[5-[[4-[[2-(2hydroxyethoxy)ethyl]
amino]-6-[(2-sulfoethyl)amino]-1,3,5triazin-2-yl]amino]-, sodium salt (1:4)
Siloxanes and Silicones, di-Me, polymers
with Me silsesquioxanes, 2,2-dimethyl-1-(1methylethyl)-3-(2-methyl-1-oxopropoxy)and 2,2,4-trimethyl-3-(2-methyl-1oxopropoxy)pentyl group-terminated
Hexanedioic acid, polymer with butanedioic
acid and 1,2-ethanediol
Chemical Gazette
Unspecified
188734-86-3
C11H26N.C2H6O4P
85153-34-0
Unspecified
719269-05-3
C11H20O4
1852-04-6
C24H38N12O10S2.2Na
357165-56-1
C32H44N12O16S4.4Na
333459-85-1
Unspecified
142657-61-2
(C6H10O4.C4H6O4.C2H6O2)x
83448-28-6
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
80
33
NOTICE OF CHEMICALS ELIGIBLE FOR IMMEDIATE LISTING ON THE
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES AFTER ISSUING OF
ASSESSMENT CERTIFICATES
Notice is given in accordance with section 13B of the Industrial Chemicals (Notification and
Assessment) Act 1989, that the following chemicals have been added to the Australian
Inventory of Chemical Substances.
Table 4
Chemicals Eligible for Immediate Listing on the Australian Inventory of Chemical
Substances
CHEMICAL NAME
Benzenesulfonic acid, 2-[[1-benzoyl-2,7dihydro-2,7-dioxo-6-[(4-sulfophenyl)
amino]-3H-naphtho[1,2,3-de]quinolin-4yl]oxy]-5-(1,1,3,3-tetramethylbutyl)-,
sodium salt (1:2)
2-Propenoic acid, 2-methyl-, C12-16-alkyl
esters, polymers with 2-decyltetradecyl
methacrylate, Me methacrylate and stearyl
methacrylate
Chemical Gazette
MOLECULAR FORMULA
CAS
NUMBER
C43H38N2O10S2.2Na
224628-70-0
Unspecified
391232-73-8
Commonwealth of Australia Gazette
No. C 11, 07 December 2010
81
34
NOTICE OF AMENDMENTS TO THE
AUSTRALIAN INVENTORY OF CHEMICAL SUBSTANCES
Notice is given, in accordance with subsection 20(b) of the Industrial Chemicals (Notification
and Assessment) Act 1989 that the following amendments have been made to the Australian
Inventory of Chemical Substances.
Table 5
Amendment to the Australian Inventory of Chemical Substances
The August Gazette contains the following listing on page 42:
CHEMICAL NAME
2-Propenoic acid, 2-methyl-, butyl ester,
polymer with butyl 2-propenoate, 2hydroxyethyl 2-methyl-2-propenoate, 1,2propanediol mono)2-methyl-2-propenoate) and
rel-(1R,2R,4R)-1,7,7trimethylbicyclo[2.2.1]hept-2-yl 2-methyl-2propenoate, bis(1,1-dimethylpropyl) peroxideinitiated
MOLECULAR FORMULA
Unspecified
CAS NUMBER
1234299-06-0
After amendment the AICS listing for this chemical is:
CHEMICAL NAME
2-Propenoic acid, 2-methyl-, butyl ester,
polymer with butyl 2-propenoate, 2hydroxyethyl 2-methyl-2-propenoate, 1,2propanediol mono(2-methyl-2-propenoate) and
rel-(1R,2R,4R)-1,7,7trimethylbicyclo[2.2.1]hept-2-yl 2-methyl-2propenoate, bis(1,1-dimethylpropyl) peroxideinitiated
MOLECULAR FORMULA
Unspecified
CAS NUMBER
1234299-06-9
The amendment is made to correct the CAS RN for this chemical
Chemical Gazette
Commonwealth of Australia Gazette
No. C 11, 07 December 2010