Galileo epfd calculations for

advertisement
Eleventh Resolution 609 (Rev. WRC-07) Consultation Meeting
Shenzhen, 13-15 October 2014
Document
13 August 2014
English only
FRANCE1
Galileo epfd calculations for
Eleventh Resolution 609 (Rev. WRC-07) Consultation Meeting
This contribution presents the results of epfd calculations performed by Galileo in preparation to the
Eleventh Resolution 609 Consultation Meeting (Shenzhen, 13-15 October 2014).
The document includes two sections :
- Section I is the Galileo calculation of the aggregate epfd, according to item 11.d) of the
Resolution 609 Terms of Reference, based on input data provided by each
operator/administration regarding the epfd of its own system,
- Section II is a comparison, for systems having provided new or updated data, of the single
system epfd obtained by the corresponding operator/administration and by Galileo.
Main conclusions are the following:
- Several systems have updated their data compared to previous Consultation Meeting, namely
COMPASS, GLONASS, and Inmarsat. In addition, two GSO networks (ALCOMSAT-24.8W
and RAGGIANA-18) have provided new data.
- The maximum aggregate epfd level assessed by Galileo, based on the single system epfd
matrices provided by each administration for its own system, remains below the Resolution
609 limit of –121.5 dB(W/m2·MHz):
o The maximum aggregate epfd in the band 1164-1215 MHz is –122.00
dB(W/m2·MHz), i.e. 0.50 dB below the Resolution 609 limit, when considering all
systems and networks. The maximum is reached at the 1176 MHz frequency. This
calculation takes into account both COMPASS regional and COMPASS global
systems.
o With the removal of NIGCOMSAT-1G/-1R, the maximum aggregate epfd in the band
1164-1215 MHz is –122.01 dB(W/m2·MHz), i.e. 0.51 dB below the Resolution 609
limit.
o With the removal of NIGCOMSAT-1G/-1R and of COMPASS Regional system
(which will eventually be replaced by the global system), the maximum aggregate
epfd in the band 1164-1215 MHz remains at ––122.01 dB(W/m2·MHz), i.e. 0.51 dB
below the Resolution 609 limit of –121.5 dB(W/m2·MHz). This is because the
maximum level of the COMPASS Regional signal is at 1207 MHz.
- For all systems and networks with new or updated characteristics, the single system epfd
matrices have been calculated using the Galileo tool. Comparison with the results obtained by
corresponding administrations shows an acceptable matching (maximum 0.1 dB difference).
1
France acts on behalf of all Galileo Administrations (GLS Administrations).
I Maximum aggregate epfd based on input data to the Eleventh Consultation Meeting
I-1 Systems taken into account in the aggregate epfd calculation
Table 1 below contains the complete list of systems that have provided an input to the Consultation
Meeting process. It also indicates whether corresponding data are confirmed from previous
Consultation Meeting, or modified, or new. And it outlines that, again, no input has been received
regarding the NIGCOMSAT-1G/-1R network.
N°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
RNSS system name
MSATNAV-2
NAVSTAR GPS
GLONASS-M FDMA
GLONASS-M CDMA
COMPASS- MEO Regional signal
COMPASS-MEO Global signal
COMPASS-IGSO Regional signal
COMPASS-IGSO Global signal
N-SAT-HEO2/QZSS-1
INSAT-NAV-GS/INSAT-NAV-A-GS2
LM-RPS-107.3W
LM-RPS-133W
INMARSAT-4 25E/-XL1/-4° 25E
INMARSAT-4 143.5E/-4A 143.5E
INMARSAT-4 98W/-4A 98W
INMARSAT-GSO-2N
COMPASS-58.75E Regional signal
COMPASS-58.75E Global signal
COMPASS-80E Regional signal
COMPASS-80E Global signal
COMPASS-110.5E Regional signal
COMPASS-110.5E Global signal
COMPASS-140E Regional signal
COMPASS-140E Global signal
COMPASS-160E Regional signal
COMPASS-160E Global signal
COMPASS-B-84E Regional signal
COMPASS-B-144.5E Regional signal
INSAT-NAV(32.5) (IRNSS)
INSAT-NAV(83) (IRNSS)
INSAT-NAV(131.5) (IRNSS)
INSAT-NAV(55) (GAGAN)
INSAT-NAV(83) (GAGAN)
LUX-G6-2-E
LUX-G7-9-E2
QZSS-GS4
QZSS-GS3
RAGGIANA-18
ALCOMSAT-24.8W
NIGCOMSAT-1G/-1R
Administration Orbital Position
F/GLS
USA
RUS
RUS
CHN
CHN
CHN
CHN
J
IND
USA
USA
G
G
G
G
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
IND
IND
IND
IND
IND
LUX
LUX
J
J
PNG
ALG
NIG
NGSO
NGSO
NGSO
NGSO
NGSO
NGSO
NGSO
NGSO
NGSO
NGSO
-107.3
-133
25
143.5
-98
64
58.75
58.75
80
80
110.5
110.5
140
140
160
160
84
144.5
32.5
83
131.5
55
83
5
31.5E
127
123
-117
-24.8
42.5
Note
Confirmed
Confirmed
Confirmed
Updated
Updated
Updated
Updated
Updated
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Re-introduced
Updated
Updated
Updated
Updated
Updated
Updated
Updated
Updated
Updated
Updated
Updated
Updated
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
Confirmed
New data
New data
No input
Table 1 - RNSS systems considered at the 11th Consultation Meeting
The calculation of the maximum aggregate epfd was performed:
- Taking into account all systems and networks listed in Table 1.
- Removing NIGCOMSAT-1G/-1R network, which has neither confirmed nor updated its data.
- Removing NIGCOMSAT-1G/-1R network as well as COMPASS Regional system, since
COMPASS Regional system will progressively be replaced by COMPASS Global system,
and since taking both systems into account simultaneously is a worst case assumption.
I-2 Results of the aggregate epfd calculations
Taking into account, for each system listed in Table 1, the 1° epfd matrix as well as the Spectral
Adjustment Factor provided by the corresponding operator or administration, Galileo has carried out
three sets of calculation for the aggregate epfd.
Set #1 : 40 systems and networks (all those listed in Table 1)
Results are given in Table 2 and in Figure 1. The maximum aggregate epfd in the band 1164-1215
MHz is –122.00 dB(W/m2·MHz), i.e. 0.50 dB below the Resolution 609 limit of –121.5
dB(W/m2·MHz).
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
-139.16
-140.40
-140.07
-139.13
-136.16
-132.84
-129.43
-127.01
-126.20
-124.93
-124.28
-123.41
-122.00
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
-123.14
-123.56
-124.39
-124.78
-125.91
-127.69
-130.14
-132.85
-136.21
-139.00
-141.30
-139.85
-137.64
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
-135.71
-134.78
-134.80
-135.62
-136.46
-138.01
-138.55
-137.69
-135.36
-132.93
-130.40
-128.41
-126.77
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
-125.68
-124.80
-124.48
-123.68
-122.54
-123.59
-125.30
-125.90
-127.03
-128.30
-130.16
-132.44
-135.70
Table 2 - Aggregate epfd results for Set #1
Frequency (MHz)
Aggregate epfd (dBW/m²/MHz)
1164
-118.00
1169
1174
1179
1184
1189
1194
1199
1204
1209
1214
Aggregate epfd limit of -121.5 dBW/m²/MHz
-123.00
-128.00
-133.00
-138.00
-143.00
Figure 1 - Plot of aggregate epfd results for Set #1
Set #2 : 39 systems and networks (all those listed in Table 1 but NIGCOMSAT-1G/-1R)
Results are given in Table 3. The maximum aggregate epfd in the band 1164-1215 MHz is –122.01
dB(W/m2·MHz), i.e. 0.51 dB below the Resolution 609 limit of –121.5 dB(W/m2·MHz). No plot is
provided for this new calculation, since there is no noticeable difference with Set #1.
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
-139.57
-142.04
-144.37
-141.89
-136.85
-132.89
-129.45
-127.02
-126.21
-124.93
-124.29
-123.42
-122.01
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
-123.14
-123.56
-124.40
-124.78
-125.92
-127.70
-130.16
-132.93
-137.00
-141.54
-143.95
-140.53
-137.69
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
-135.72
-134.79
-134.81
-135.63
-136.46
-138.01
-138.55
-137.69
-135.36
-132.93
-130.40
-128.41
-126.77
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
-125.68
-124.80
-124.48
-123.68
-122.54
-123.59
-125.30
-125.90
-127.03
-128.30
-130.16
-132.44
-135.70
Table 3 - Aggregate epfd results for Set #2
Set #3 : 30 systems and networks (all those listed in Table 1 but NIGCOMSAT-1G/-1R and
COMPASS Regional system)
Results are given in Table 4 and Figure 2. The maximum aggregate epfd in the band 1164-1215 MHz
is still -122.01 dB(W/m2·MHz), i.e. 0.51 dB below the Resolution 609 limit of –121.5
dB(W/m2·MHz). The maximum level of the COMPASS Regional signal is at 1207 MHz, hence
removing this system only modifies the maximum aggregate epfd for the upper part of the 1164-1215
MHz band, as can be seen in Figure 2.
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
Center
Frequency
(MHz)
Max RNSS
Agg epfd
(dB(W/m2/MHz))
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
-139.60
-142.08
-144.37
-141.92
-136.86
-132.91
-129.46
-127.02
-126.21
-124.94
-124.29
-123.42
-122.01
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
-123.14
-123.57
-124.40
-124.79
-125.93
-127.71
-130.18
-132.97
-137.04
-141.63
-144.00
-140.70
-137.83
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
-135.91
-134.99
-135.10
-135.90
-136.85
-138.26
-138.82
-137.69
-135.56
-133.13
-130.75
-128.71
-127.17
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
-126.04
-125.30
-124.91
-124.83
-124.99
-125.33
-125.84
-126.57
-127.57
-128.91
-130.70
-133.05
-136.23
Table 4 - Aggregate epfd results for Set #3
Aggregate epfd (dBW/m²/MHz)
Frequency (MHz)
1164 1169 1174 1179 1184 1189 1194 1199 1204 1209 1214
-118.00
Aggregate epfd limit of -121.5 dBW/m²/MHz
-123.00
-128.00
-133.00
-138.00
-143.00
Figure 2 - Plot of aggregate epfd results for Set #3
II Comparison of the single system epfd results obtained through different software tools
As indicated in Table 1, updated or new data for several systems and networks have been provided to
the Forum as input for the Eleventh Consultation Meeting. This section provides a comparison
between the single system epfd matrices calculated with the Galileo tool and those provided by
corresponding administrations .
II-1 Comparison of single system epfd for GSO networks
For all GSO networks corresponding to updated or new characteristics, the single system epfd matrix
has been calculated through the Galileo software tool, and compared with the result provided by
corresponding administrations. Table 4 below provides the maximum difference in this cell by cell
comparison, and shows an acceptable matching.
The comparison was not performed for Inmarsat-GSO-2N at 64E, since the epfd provided for this
networks is identical to the one which was already taking into account during the fifth and the Sixth
Consultation Meetings.
RNSS system name
Administration
Orbital
Position
COMPASS-58.75E Regional signal
COMPASS-58.75E Global signal
COMPASS-80E Regional signal
COMPASS-80E Global signal
COMPASS-110.5E Regional signal
COMPASS-110.5E Global signal
COMPASS-140E Regional signal
COMPASS-140E Global signal
COMPASS-160E Regional signal
COMPASS-160E Global signal
COMPASS-B-84E Regional signal
COMPASS-B-144.5E Regional signal
RAGGIANA-18
ALCOMSAT-24.8W
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
CHN
PNG
ALG
58.75
58.75
80
80
110.5
110.5
140
140
160
160
84
144.5
-117
-24.8
Maximum difference between
Galileo and administration
results, for the single system
epfd
0.0019 dB
0.0019 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0015 dB
0.0067 dB
0.0019 dB
Table 4 – Maximum difference in the epfd calculated for new or updated GSO networks
II-2 Comparison of single system epfd for GLONASS-M CDMA
The updated epfd for GLONASS CDMA signal has been calculated with the Galileo tool, based on
input data provided by GLONASS. The comparison between the results obtained with the Galileo and
Glonass tools is shown on Figure 3, the maximum difference is of 0.0986 dB, and is considered
acceptable.
Latitude (degree)
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90
-134
-134.2
Maximum EPFD (dBW/m²/MHz)
-134.4
-134.6
-134.8
-135
-135.2
-135.4
-135.6
-135.8
GLONASS Tool
Galileo Tool
-136
-136.2
-136.4
-136.6
-136.8
-137
Figure 3 - Comparison of the results obtained through GLONASS and Galileo tools for the single
system epfd of GLONASS CDMA signal
II-3 Comparison of single system epfd for COMPASS-MEO Regional system
The updated epfd for COMPASS-MEO Regional signal has been calculated with the Galileo tool,
based on input data provided by China. The comparison between the results obtained with the Galileo
and Compass tools is shown on Figure 4, the maximum difference is of 0.0234 dB, and is
considered acceptable.
Latitude (degree)
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90
-128.6
Maximum EPFD (dBW/m²/MHz)
-128.8
-129
-129.2
-129.4
-129.6
-129.8
-130
-130.2
-130.4
-130.6
-130.8
COMPASS Tool
Galileo Tool
-131
-131.2
Figure 4 - Comparison of the results obtained through Compass and Galileo tools for the single
system epfd of COMPASS-MEO Regional signal
II-4 Comparison of single system epfd for COMPASS-MEO Global system
The updated epfd for COMPASS-MEO Global signal has been calculated with the Galileo tool, based
on input data provided by China. The comparison between the results obtained with the Galileo and
Compass tools is shown on Figure 5, the maximum difference is of 0.0603 dB, and is considered
acceptable.
Latitude (degree)
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90
-129.4
Maximum EPFD (dBW/m²/MHz)
-129.6
-129.8
-130
-130.2
-130.4
-130.6
-130.8
-131
COMPASS Tool
-131.2
-131.4
Galileo Tool
-131.6
Figure 5 - Comparison of the results obtained through Compass and Galileo tools for the single
system epfd of COMPASS-MEO Global signal
II-5 Comparison of single system epfd for COMPASS-IGSO Regional system
The updated epfd for COMPASS-IGSO Regional signal has been calculated with the Galileo tool,
based on input data provided by China. The comparison between the results obtained with the Galileo
and Compass tools is shown on Figure 6, the maximum difference is of 0.0794 dB, and is
considered acceptable.
Latitude (degree)
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90
Maximum EPFD (dBW/m²/MHz)
-129.4
-129.6
-129.8
-130
-130.2
-130.4
-130.6
-130.8
-131
-131.2
-131.4
-131.6
-131.8
-132
-132.2
-132.4
-132.6
-132.8
-133
-133.2
-133.4
-133.6
COMPASS Tool
Galileo Tool
Figure 6 - Comparison of the results obtained through Compass and Galileo tools for the single
system epfd of COMPASS-IGSO Regional signal
II-6 Comparison of single system epfd for COMPASS-IGSO Global system
The updated epfd for COMPASS-IGSO Global signal has been calculated with the Galileo tool,
based on input data provided by China. The comparison between the results obtained with the Galileo
and Compass tools is shown on Figure 7, the maximum difference is of 0.0987 dB, and is
considered acceptable.
Latitude (degree)
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
Maximum EPFD (dBW/m²/MHz)
-134.4
-134.6
-134.8
-135
-135.2
-135.4
-135.6
-135.8
-136
-136.2
-136.4
-136.6
-136.8
-137
-137.2
-137.4
-137.6
-137.8
-138
-138.2
-138.4
-138.6
-138.8
COMPASS Tool
Galileo Tool
Figure 7 - Comparison of the results obtained through Compass and Galileo tools for the single
system epfd of COMPASS-IGSO Global signal
______________________________
90
Download