2010-2015 yılları arası uluslararası dergilerde yayınlanan makaleler

advertisement

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER

2015 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Kara E, Geylan AF, Koç K, Karakuzu Ş, Demir M, Aykul H. “Flexural performance of the sandwich structures having aluminum foam core with different thicknesses”, World Academy of Science, Engineering and Technology, International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, International Science Index, 9(5), pp. 742-747, 2015.

Kara E, Karakuzu Ş, Geylan AF, Demir M, Koç K, Aykul H, “An Investigation on the

Sandwich Panels with Flexible and Toughened Adhesives under Flexural Loading”, World

Academy of Science, Engineering and Technology, International Journal of Mechanical,

Aerospace, Industrial and Mechatronics Engineering, International Science Index, 9(5), pp. 651-

658, 2015.

SCI

Kara, E, Kurşun, A, Haboğlu, MR, Enginsoy, HM, Aykul, H. “Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths.” Proc. Inst. of

Mech. Eng. Part C: Journal of Mechanical Engineering Science, doi:

10.1177/0954406214559111

SCI Crupi V, Kara E, Epasto G, Guglielmino E, Aykul H. "Prediction Model for the İmpact

Response of Glass Fibre Reinforced Aluminum Foam Sandwiches", İnternational Journal of

İmpact Engineering, v.77, pp.97-107, 2015.

SCI Yataganbaba, A., Kılıcarslan, A., Kurtbas, I. "Irreversibility Analysis of a Two Evaporator

Vapor Compression Refrigeration System" International Journal of Exergy, (Accepted/In

Press), 2015.

SCI Yataganbaba, A., Kurtbas, İ., "Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams" Experimental Heat Transfer, (Accepted/In Press), 2015.

Erdin, M. E., Atmaca, A., "Implementation of an Overall Design of a Flexible Manufacturing

System", Procedia Technology, v. 19, pp. 185-192, 2015 .

SCI Tuzun, F., N., Tunalıoglu, M., S., 'The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives', Composite Structures, v. 121, p.p. 296, 303, 2015.

SCI Caliskan S., N. Khalaji, S. Baskaya, I. Kotcioglu, Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by Taguchi method. Heat

Transfer Engineering, Volume 37, issue 15, 2015.

Meran A, Baykasoglu C, Mugan A, Toprak T 2015 Development of crash energy management design for a railway passenger car, Proceedings of the Institution of Mechanical Engineers, Part

F: Journal of Rail and Rapid Transit doi: 10.1177/0954409714533321

SCI Baykasoglu C and Cetin Tunay M. 2015 Energy absorption of circular aluminum tubes with functionally graded thickness under axial impact loading, International Journal of

Crashworthiness. 20(1), 95-106

SCI Ozturk Z, Baykasoglu C, Celebi AT, Kirca M, Mugan A, To AC, 2015 Hydrogen Storage in

Heat Welded Random CNT Network Structures, International Journal of Hydrogen Energy, 40,

403-411

SCI Arat S., Baykasoglu C., Bilhan H., Kutay O., Mugan A. 2015 The Effect of the attachment types and implant number supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis, Journal of Biomechanics, 48(1), 130-

137

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER

2014 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Kursun A, Kara E., Uygun R., Aykul H.“Compressive Behaviour of Glass Fiber Reinforced

Aluminium Foam”,The Online Journal of Science and Technology, v. 4 (1), 21-26, 2014.

Haboğlu, M. ; Kurşun, A. ; Aksoy, Ş. ; Aykul, H. ; Bektaş, N. 'Thermal Elastic Stress

Analysis of Steel Fiber Reinforced Aluminum Composites', World Academy of Science,

Engineering and Technology, International Science Index 86, International Journal of

Mechanical, Industrial Science and Engineering, 8(2), 23 - 27. 2014.

Kurşun, A. ; Çetin, M. ; Çetin, E. ; Aykul, H. 'Elastic Stress Analysis of Composite

Cantilever Beam Loaded Uniformly', World Academy of Science, Engineering and

Technology, International Science Index 86, International Journal of Mechanical, Industrial

Science and Engineering, 8(2), 38 - 40, 2014.

Tamdemir S., Kılıcarslan A "Thermodynamic Analysis of A Heat Pump for Different

Refrigerants", Hittite Journal of Science and Engineering, 1(1), pp. 27-36 (2014)

SCI Kiliçarslan A., Qatu M. S.,Performance investigation of an eight cylinder gasoline engine

ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014;

Montreal; Canada; 14 November 2014 through 20 November 2014;

Kurtbas İ., Yatağanbaba, A. and Sener, M.," Effect of the Mini Perforated Resistance on Heat

Transfer and Pressure Loss" Journal of Environmental Science, International Scientific

Journal, ISBN-10: 1499721986, ISBN-13: 978-1499721980, 2014, pp. 126-130.

SCI Kurtbas İ., Gülçimen F., Kılıçarslan A., Kaya M., “Effect of swirl generator inserted into a tube on exergy transfer: decaying flow”, Experimental Heat Transfer, pp. 472-487 (2014).

Kurtbas İ., Yatağanbaba, A. and Sener, M.," Effect of the Mini Perforated Resistance on Heat

Transfer and Pressure Loss" Journal of Environmental Science, International Scientific

Journal, ISBN-10: 1499721986, ISBN-13: 978-1499721980, 2014, pp. 126-130.

Yatağanbaba, A.,Kurtbaş, İ.," Determination of Optimum Parameters for Walls with Phase

Change Materials" Journal of Environmental Science, International Scientific Journal, ISBN-

10: 1499721986, ISBN-13: 978-1499721980, 2014, pp. 104-110.

SCI Özdin, K.,Büyük, E.,Abdalov, F,Bayram, H., Çini, A., Investigation of spring-back and spring-go of AISI 400 S sheet metal in "V" bending dies depending on bending angle and punch radius, Applied Mechanics and Materials, Volume 532, 2014, Pages 549-553, DOI:

10.4028/www.scientific.net/AMM.532.549.

SCI Ozdin K., Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite

Experimental Techniques Volume 38, Issue 6, 1 November 2014, Pages 16-20

SCI Köstekci, F. (2014). "Effects of Flexural Stiffness, Axial Velocity and Internal Support

Locations on Translating Beam’s Natural Frequencies." Applied Mechanics and Materials

532: 316-319.

SCI Tunalioglu, M., S., Tuc, B., 'Theoretical and experimental investigation of wear in internal gears', Wear, Vol. 309(1-2), p.p:208-215, 2014.

SCI Heat transfer characteristics of longitudinal perforated and unperforated ribs under impingement jets , Volume 8B, 2014

SCI Çalışkan S., Başkaya Ş., Çalışır T. "Experimental and numerical investigation of geometry effects on multiple impinging air jets", International Journal of Heat and Mass Transfer, Vol.

75, pp. 685-703, 2014.

SCI Çalışkan S " Experimental investigation of heat transfer in a channel with new winglet-type vortex generators", International Journal of Heat and Mass Transfer, Vol. 78, pp. 604-614,

2014.

SCI Celebi A T, Kirca M, Baykasoglu C, Mugan A and To A. C. 2014 Tensile behavior of heat welded CNT network structures, Computational Material Science, 88,14-21

Kara E., Kurşun A., Haboğlu MR., HM Enginsoy, H Aykul (2014) "Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths",

Part C: Journal of MechanicalEngineering Science, DOİ :10.1177/0954406214559111

Aksoy, Ş. ; Kurşun, A. ; Çetin, E. ; Haboğlu, M. (2014), 'Stress Analysis of Laminated

Cylinders Subject to the Thermomechanical Loads', World Academy of Science, Engineering

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER and Technology, International Science Index 86, International Journal of Mechanical,

Industrial Science and Engineering, 8(2), 5 - 10.

Çetin, E. ; Kurşun, A. ; Aksoy, Ş. ; Çetin, M. (2014), 'Elastic Stress Analysis of Annular Bi-

Material Discs with Variable Thickness under Mechanical and Thermomechanical Loads',

World Academy of Science, Engineering and Technology, International Science Index 86,

International Journal of Mechanical, Industrial Science and Engineering, 8(2), 49 - 53.

Kurşun, A. ; Kara, E. ; Çetin, E. ; Aksoy, Ş. ; Kesimli, A. (2014), 'Mechanical and Thermal

Stresses in Functionally Graded Cylinders', World Academy of Science, Engineering and

Technology, International Science Index 86, International Journal of Mechanical, Industrial

Science and Engineering, 8(2), 64 - 69.

SCI Bakal A., Aydın F., Mahmut D. Mat, Beycan Ibrahimoğlu and İbrahim Pamuk. A novel twopart interconnector for solid oxide fuel cells. International Journal of Energy Research.

Nov2014, Vol. 38 Issue 14, p1835-1842.

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER

2013 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

SCI Ertürk E., Dalkız M., Özyılmaz E, Akbaş HZ, Çetinkara A., Aykul H. “The evaluation of the effects of surface treatments on different dental ceramic structures”. Materials and

Technology, v.47, n.5, 653-660,2013

Atmaca A., Türkbas O.S., Erdin M.E., Aykul H. "Elasto-Plastic Stress Analysis of Steel

Fibre Reinforced Aluminum Metal Matrix Composite Plates", Journal of Manufacturing and

İndustrial Engineering, v12, n.1-2, 12-16, 2013.

SCI Gemalmayan, N., Tunalıoğlu M., Ş., "Saturation Operation on the Direct Current Motor That is Used for Manipulator", Gazi University Journal of Science, 26(3):459-465 (2013).

SCI S. Çalışkan "Flow and heat transfer characteristics of transverse perforated ribs under impingement jets", International Journal of Heat and Mass Transfer, Vol. 66, pp. 244-260,

2013.

SCI

Baykasoglu C, Kirca M and Mugan A 2013 Nonlinear failure analysis of carbon nanotubes by using molecular-mechanic based models, Composite Part B: Engineering,50, 150-157

SCI Arat S., Bilhan H., Bozdag E., Sunbuloglu E., Baykasoglu C., Kutay O., 2013 The Influence of the Attachment Type and Implant Number Supporting Mandibular Overdentures on Stress

Distribution: An in vitro Study - Part I, Implant Denstry, 22, 39-48.

SCI Baykasoğlu, C.,Muğan, A., Sünbüloğlu, E., Bozdağ, E., Aruk, F., Toprak, T., 2013 Rollover crashworthiness analyses of a railroad passenger car, International Journal of

Crashworthiness,18-1,492-501

SCI Kurşun, A., Topçu, M., (2013), Thermal stress analysis of functionally graded disc with variable thickness due to linearly increasing temperature load, The Arabian Journal for

Science and Engineering, DOI:10.1007/s13369-013-0626-x.

SCI Kurşun, A., Şenel, M., (2013), Investigation of the effect of low-velocity ımpact on composite plates with preloading, Experimental Techniques, 35 /2/1-8.

SCI Bakal A, Kaya M and Mahmut D. Mat, Numerical Investigation of Amounts of Heat, Power and Temperature Distribution in IT-SOFC, ECS Trans. 2013 58(3): 115-129; doi:10.1149/05803.0115ecst

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER

2012 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Dalkız M., Arslan D.,Tuncdemir A.R. Bilgin M.S.,.Aykul H., Effect of different palatal vault shapes onthe dimensional stability of glass fiberreinforcedheat-polymerized acrylic resindenture base material, European Journal of Dentistry, v.6, 70-78, 2012.

SCI Kılıçarslan A., “Irreversibility analysis of a compression refrigeration cycle using natural refrigerants for a sustainable future”, International Journal of Exergy, 101(2), pp. 155-170

(2012).

SCI

. B. S. Ünlü, A. M. Pınar, K. Özdin, "Tribological properties of Sn-Pb based SnPbAlZn journal bearings", Materials Testing (ISI) , 713-717 pp., 2012

SCI Çalışkan S., Başkaya Ş. "Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs", International Journal of Heat and Mass Transfer, Vol. 55, pp. 6260-6277, 2012.

SCI Çalışkan S., Başkaya Ş. "Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs", International Journal of Thermal

Sciences , Vol. 59, pp. 234- 246, 2012.

SCI Baykasoglu C and Mugan A 2012 Nonlinear fracture analysis of single-layer graphene sheets, Engineering Fracture Mechanics, 96, 241-250

SCI Baykasoglu C and Mugan A 2012 Coupled molecular/continuum mechanical modeling of graphene sheets, Physica E: Low-dimensional Systems and Nanostructures, 45, 151-161.

SCI .Baykasoglu, C., Sünbüloglu, E., Bozdag, E., Aruk, F., Toprak, T., Mugan, A., 2012 Crash and structural analyses of an aluminum railroad passenger car, International Journal of

Crashworthiness, 17-5, 519-528.

SCI Baykasoglu C and Mugan A 2012 Dynamic analysis of single-layer graphene sheets

Computational Material Science, 55, 228-236.

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER

2011 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

Dalkız M., ,Arslan D. Tuncdemir A.R. Aykul H. Effect of different palatal vault shapes onthe dimensional stability of glass fiberreinforcedheat-polymerized acrylic resindenture base material, European Journal of Dentistry, v.6, 70-78, 2012.

SCI Kılıçarslan A., Kurtbaş İ, “Comparison of superheating effect of water as a refrigerant with the other refrigerants”, Journal of Thermal Science and Technology, 31(2), pp. 33-40 (2011).

SCI Çalışkan S., Altunok T., Başkaya Ş., Güngüneş H.M "Hava Perdeli Bir Ticari Soğutma

Kabininin Sayısal Analizi", Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Vol.

26(2), pp. 415-425, 2011.

SCI Kotcioğlu İ., Çalışkan S, Başkaya Ş "Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin–fin arrays", Heat and Mass Transfer,

Vol. 47, pp. 1133-1142, 2011.

SCI Kotcioğlu İ, Cansız A., Çalışkan S, Başkaya Ş "Transient Turbulent Flow and Heat Transfer

Phenomena in Plate-Fin Type Cross-Flow Heat Exchanger", Heat Transfer Engineering, Vol.

32(1), pp. 20-32, 2011.

SCI Baykasoğlu, C., Sünbüloğlu, E., Bozdağ, E., Aruk, F., Toprak, T., Muğan, A., 2011 Railroad passenger car collision analysis and modifications for improved crashworthiness,

International Journal of Crashworthiness, 16-3, 319-329.

SCI Kurşun, A., Topçu, M., Tetik, T., (2011), Stress analysis of functionally graded disc under thermal and mechanical loads, Procedia Engineering, 10/ 2949–2954.

2010-2015 YILLARI ARASI ULUSLARARASI DERGİLERDE YAYINLANAN

MAKALELER

2010 YILI ULUSLARARASI DERGİLERDE YAYINLANAN MAKALELER

SCI Aykul. H., Kaya. S. “An Elastic-Plastic and Residual Stress Analysis Steel Reinforced

Thermoplastic Composite Cantilever Beam”, Materials and Design, v.31 n.7, 3474-3481,

2010.

SCI Kılıcarslan A., Hosoz M, “Energy and irreversibility analysis of a cascade refrigeration system for various refrigerant couples”, Energy Conversion and Management, 51, 2947-2954 (2010).

SCI Kurtbaş İ., Çelik N., Dinçer İ, Exergy transfer in a porous rectangular channel, energy, 35, (1),

451-460

SCI Çelik H, N., Kurtbaş İ., Yildiz, S. Exergy analysis of coil-spring turbulators inserted in the horizontal concentric tubes Journal of Heat Transfer Volume 132, Issue 10, 2010, Page

101802

SCI Kotcioğlu I, Çalışkan S, Cansız A, Başkaya Ş. "Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator", Energy , Vol. 35, pp.

3686-3695, 2010.

Download