SECTION 10530
PATIO COVERS AND PERGOLAS
Display hidden notes to specifier in Word 2010 by:
Click File > Options > Display > Under “Always show these” select “Hidden Text”
© 2013 BACKYARD AMERICA – All rights reserved
PART 1 GENERAL
1.1
1.2
1.3
1.4
1.5
SECTION INCLUDES
A.
Structural Pergola Components.
B.
Pergola Footings.
C.
Pergola Canopy Systems.
RELATED SECTIONS
A.
Section 02300 - Earthwork: Excavation and backfill.
B.
Section 03300 - Cast-in-Place Concrete: Foundations and floor slab.
C.
Section 09900 - Painting: Paint and stain field applied finish.
REFERENCES
A.
ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
B.
ASCE 7-10 - American Society of Civil Engineers, Minimum Design Loads for Buildings and other
structures.
DESIGN/PERFORMANCE REQUIREMENTS
A.
Design members to withstand wind loads in accordance with ASCE 7-10 and applicable code.
B.
Design foundations in accordance with applicable code and good construction practices for the
specific structure and site conditions.
C.
Cooperate with regulatory agency or authority and provide data as requested.
D.
Design pergola for required allowable ground snow load in accordance with the applicable code.
E.
Design pergola in accordance with applicable fire code and provide data on ASTM E 84 testing
performance.
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Product specification sheets.
2.
Installation instructions.
C.
Shop Drawings: Indicate assembly dimensions, locations of structural members, connections, and
general construction details, anchorages and method of anchorage, and method of installation.
D.
Selection Samples: For each finish product specified, two complete sets of color samples
10530-1
representing manufacturer's full range of available colors.
E.
1.6
1.7
1.8
1.9
Verification Samples: For each finish product specified, two samples representing actual product and
color.
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Single source manufacturer for design, engineering, structure
pre-fabrication, and shipping.
B.
Installer Qualifications: Familiar with manufacturer's structures and installation techniques.
DELIVERY, STORAGE, AND HANDLING
A.
All packages and pallets should be opened and inspected for hidden damage upon receipt. Any
missing or damaged components should be noted on the delivery receipt with the carrier before
accepting the shipment.
B.
Repackage components and carefully store in an area protected from the weather until ready for
installation.
C.
Handle materials so as to protect materials, coatings, and finishes during transportation and
installation to prevent damage or staining.
SEQUENCING
A.
Ensure that footing location plans and other information required for installation of products of this
section are furnished to affected trades in time to prevent interruption of construction progress.
B.
Ensure that products of this section are supplied to affected trades in time to prevent interruption of
construction progress.
WARRANTY
A.
Provide manufacturer’s warranties, as appropriate, for all pergola components, canopy systems, and
finish coatings.
1.
10 Year commercial warranty on Trex Pergola cellular PVC pergolas.
2.
25 Year residential warranty on Trex Pergola cellular PVC pergolas.
3.
20 Year commercial/residential finish warranty on ColorLast Process Finish.
4.
10 Year commercial/residential warranty on ShadeRight fixed canopy system.
5.
5 Year commercial/residential warranty on ShadeTree pergola canopy system.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: Backyard America, exclusive manufacturer of Trex Pergola, which is
located at: 3300 Dill Smith Dr.; Fredericksburg, VA 22408 Phone: 877.489.8064 Fax: 877.489.2009
Email: questions@backyardamerica.com, Website: www.backyardamerica.com
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01600.
MATERIALS
A.
Provide the following pergolas to the overall sizes and configuration indicated on the Drawings.
B.
Attachment Method.
1.
Attached to host structure.
2.
Freestanding.
10530-2
2.3
C.
Overall width (direction of beam) of pergola: _____.
D.
Overall projection (direction of rafters) of pergola: _____.
E.
Column Selection
1.
Fiberglass 8” x 8’ High Round Tapered Column with TensionRod and Aluminum Plate
Mounting System.
2.
Fiberglass 10” x 8’ High Round Tapered Column with TensionRod and Aluminum Plate
Mounting System.
3.
Fiberglass 12” x 10’ High Round Tapered Column with TensionRod and Aluminum Plate
Mounting System.
4.
Fiberglass 8” x 8” x 8’ High Square Column with TensionRod and Aluminum Plate Mounting
System.
5.
Fiberglass 10” x 10” x 8’ High Square Column with TensionRod Mounting System.
6.
Fiberglass 8” x 8” x 8’ High Square Column with 15” x 15” x 36” High Column Base and
TensionRod and Aluminum Plate Mounting System.
7.
Custom TrexTrim cellular PVC Column Wrap Kit: ____” x ____” x ____’ High.
8.
Custom Fiberglass Column with TensionRod and Aluminum Plate Mounting System.: ____” x
____” x ____’ High.
F.
Beam Component Selection.
1.
3 ½” x 9 ½” Aluminum Reinforced TrexTrim cellular PVC.
2.
Custom Size: _______________.
G.
Rafter Component Selection.
1.
1 ½” x 7 ¼” Aluminum Reinforced TrexTrim cellular PVC.
2.
Custom Size: _______________.
H.
Stringer Component Selection.
1.
1 ½” x 1 ½” Solid TrexTrim cellular PVC.
2.
Custom Size: _______________.
I.
Hardware.
1.
All exposed hardware to be stainless steel or aluminum.
J.
Canopy System.
1.
ShadeRight Fixed Pergola Canopy System.
a.
Overall width of fixed canopy: _____.
b.
Overall projection of fixed canopy _____.
2.
ShadeTree Retractable Pergola Canopy System.
a.
Specify fabric name: _______________.
FINISH
A.
Provide all pergola components (columns, beams, rafters, and stringers) with ColorLast Process
finish coating applied.
1.
Specify color for columns: White, Charcoal Black, Gravel Path, Tree House, Fire Pit, Clam
Shell, Vintage Lantern, Rope Swing, Beach Dune, custom: _______________.
2.
Specify color for beams: White, Charcoal Black, Gravel Path, Tree House, Fire Pit, Clam Shell,
Vintage Lantern, Rope Swing, Beach Dune, custom: _______________.
3.
Specify color for rafters: White, Charcoal Black, Gravel Path, Tree House, Fire Pit, Clam Shell,
Vintage Lantern, Rope Swing, Beach Dune, custom: _______________.
4.
Specify color for stringers: White, Charcoal Black, Gravel Path, Tree House, Fire Pit, Clam
Shell, Vintage Lantern, Rope Swing, Beach Dune, custom: _______________.
B.
Provide all pergola components (columns, beams, rafters, and stringers) without a finish coating
applied for finishing on site.
C.
Provide all TrexTrim cellular PVC pergola components (beams, rafters, and stringers) without a
10530-3
finish coating applied for installation without any additional finishing (none required).
2.4
ATTACHMENTS
A.
Illustrations:
1.
Width and Projection Orientation Illustration.
2.
Component Identification Illustration.
PART 3 EXECUTION
3.1
EXAMINATION
A.
Do not begin installation until supporting structures have been properly prepared.
10530-4
B.
3.2
PREPARATION
A.
3.3
3.4
Clean component surfaces thoroughly prior to installation.
INSTALLATION
A.
Install in accordance with manufacturer's instructions.
B.
Construct foundations in accordance with local codes and good construction practices for the
specific structure and site conditions.
1.
Surface Mount on Existing Concrete Slab: Surface mount units on existing concrete slab as
indicated in the installation instructions. Concrete shall conform to Section 03300.
2.
Surface Mount on New Footings: Surface mount units on new concrete footings as indicated in
the on the approved shop drawings. Slab requirements vary according to structure size.
Concrete shall conform to Section 03300.
3.
Anchor bolts for surface mounted units shall be accurately set using manufacturer’s
instructions.
4.
Canopy Systems: Install in accordance with manufacturer’s instructions.
CLEANING
A.
3.5
If foundation preparation is the responsibility of another installer, notify Architect of unsatisfactory
preparation before proceeding.
Clean all surfaces and restore any marred surfaces to original conditions as approved by the
Architect.
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair, or replace damaged products before Substantial Completion.
END OF SECTION
10530-5