DAARTT (Danish Assistance to Afghan Rehabilitation and Technical Training) is an NGO established in Afghanistan by the Danish People’s Aid (DPA) in 2003. DAARTT is specialized in construction and in building capacity in all aspects of construction. DAARTT core staff consists of experienced Afghan engineers and architects. DAARTT has constructed more than 100 schools, dormitories, clinics and other buildings in Afghanistan and built capacity of the Afghan people and government entities.
DAARTT has plan to renovate or upgrade some of its own schools building designs mainly 12- 16 classroom school building and is requesting quotations from qualified consultants/consultant companies for design renovation or upgrading the existing designs under DAARTT direct supervision.
Upgrading DAARTT own 12 and 16 classrooms school building design mainly, Plumbing and electricity, need for plumbing and electrical designer to work closely with DAARTT technical staff.
2-storey school buildings
The architectural and structural drawings have been prepared by DAARTT own architect.
The consultant must: o Produce all complete designs and working drawings for the buildings/plumbing and
Electricity o Follow DAARTT instructions at key stages of the design process o Base designs on the Standard Building Construction codes (ABC) code. o Produce the following documents:

Engineering Designs/Drawings, including the following:
plumbing
 Lists of specifications/plumbing and Electricity
 Bills of quantities/plumbing and Electricity

All drawings must be easy to read and understand, implementable.

Only DAARTT logo and title box may appear on all documents.
The architecture design drawing already exist.
Plumbing
The plumbing is include (water supply and sewer systems) of outside and inside of the building.
Electricity
The electrical installation will not be surface mounted and will follow international norms and standards. Lighting will provide adequate illumination levels for work and safe circulation on the premises
Electricity
Electricity is available on site. The electrical installation will not be surface mounted and will follow international norms and standards. Lighting will provide adequate illumination levels for work and safe circulation on the premises.
A-DESIGN DRAWINGS
Given the size of the buildings, the drawings will be in A-3 format. Hard copies will be printed in black and white so they can be easily reproduced.
Scales used for Civil Engineering drawings will be 1/1000; 1/500; 1/200 and 1/100
Scales used for Architectural and Mechanical drawings will be: 1/200; 1/100 and 1/50
Scales for details will be: 1/50; 1/20; 1/10; 1/5 and 1/2 or clearly marked NTS - Not to scale.
General
Cover sheet and Index of drawings
Plumbing
Site/ water supply system connection to city water supply system or deep weal
Sewer system connection to city sewer system or site septic tank.
Water system plan
Sewer system plan
Typical pipe table Details
Typical fixture details plan
Isometric plan for water and sewer system.

Electrical
Site/ connection to city power
Lighting plan and fixture schedules
Power plan
Outline riser diagrams for power, etc
Single line diagrams for power, etc
Lightning protection plan
B. - DESIGN ANALYSIS
The design analysis will address the following items:
Electrical DA
Water pressure calculations
Calculation of sewerage system for septic tank volume
Calculations of water system for water reservoir Volume.
Miscellaneous calculations as required. Examples; size of pipe for sewer and water supply systems, etc
C. - TECHNICAL SPECIFICATIONS
Modifications, additions or deletions will be identified to provide a complete set of Technical
Specifications to enable construction Quality Control and Quality Assurance.
D. - BILL OF QUANTITIES

Plumbing

Electricity
The following has to be delivered:
. o A complete set of working drawings for each task (Hard and soft copies By
AUTO CAD). o Design analysis reports for each task. o Technical specifications for each task o Bill of quantities for each task

The drawings and design analysis reports must be finalized within 15 working days. And we expect the company to stay on call for us and anytime DAARTT needs it, the company should provide services.
Does companies national or government wants to work for this proposal, they can send their lower price to these below emails and if you want information you can contact to these below phone numbers.
Thanks,
Anwar@daartt.org
(+93) 0777735443 fahim@daartt.org