DR. AZZEDDINE OUDJEHANE
PUBLICATIONS:
Oudjehane, A. and Lam F., Development of innovative preheating technology for MPB engineered wood
products, FII MDP 09-063, Annual report, March 2009.
(http://www.bcfii.ca)
J.F. Kadla, G.D. Smith, F. Lam, Y-S. Kim and A. Oudjehane, Development of high performance MPB
wood composites through nanotechnology, FII MDP 09-064, Annual report, March 2009.
(http://www.bcfii.ca)
A. Oudjehane, J. Wang, C. Zhang, G. D. Smith, and F. Lam, Development of thick strand-based
mountain pine beetle wood composites: “Duration of load and permeability analyses,” pp. 178-181, Vol.
9, #3, 2009.
F.C. Chang, A. Oudjehane and F. Lam, Development of mountain pine beetle wood plastic composites,
pp. 163- 166, Vol.9, #3, 2009.
Y. Chen, A. Oudjehane and F. Lam, Bending behaviour of thick laminated mountain pine beetle wood
plates with different connections, BC Journal of Ecosystem Management, pp. 170-173, Vol.9, #3, 2009.
R. Parisotto, J. Taylor and A. Oudjehane, “ Fibre Opportunities and Manufacturing,” at the FORREX
Conference on Mountain Pine Beetle: from lessons learned to community-based solutions, UNBC Prince
George, June 10–11, 2008.
F. Lam, J.F. Kadla, G.D. Smith, A. Oudjehane and J. Wang, Development of thick strand based MPB wood
composites, FII MDP 08-066C, Annual report, March 2008.
(http://www.bcfii.ca)
F. Lam, A. Saravi and A. Oudjehane, High Temperature Pre-heating of MPB logs for Optimized Processing
into Strand based composites, Technical report FII MDP 08-074, March 2008.
(http://www.bcfii.ca)
F. Lam, J.F. Kadla, F.C. Chang and A. Oudjehane, Development of MPB wood and MPB wood plastics, FII
MDP 08-066A, Annual report, March 2008.
(http://www.bcfii.ca)
F. Lam, J.F. Kadla, G.D. Smith, A. Oudjehane and J. Wang, Development of thick strand based MPB wood
composites, FII MDP 07-020B, Annual report, March 2007.
(http://www.bcfii.ca)
F. Lam, J.F. Kadla, G.D. Smith, A. Oudjehane and J. Wang, Development of thick strand based MPB wood
composites, FII MDP 06-05, Annual report, March 2007.
(http://www.bcfii.ca)
Oudjehane, A., “A comparative study of single and multiple layer wood composite panels,” In
proceedings of the International Conference on Composites Engineering (ICCE 7), pp. 433- 434, Denver,
July 2-8, 2000.
A. Oudjehane, F. Lam and S. Avramidis, “A continuum model of the interaction between manufacturing
variables and consolidation of wood composite mats,” Wood Science & Technology, Vol. 32, pp. 381391, 1998.
A. Oudjehane and F. Lam, “On the density profile within random and oriented wood based composite
panels: Horizontal distribution,” Composites Part B, Engineering Journal Vol. 29, No 6, pp. 687-694,
1998.
A. Oudjehane, F. Lam and S. Avramidis, “Modeling the influence of formation process on properties of
flake boards,” In Engineered Systems Using Structural Panels, The Forest Products Society (FPS), pp. 1-5,
1998.
A. Oudjehane, F. Lam and S. Avramidis, “Forming and pressing processes of random and oriented wood
composite mats,” Composites Part B, Engineering Journal, Vol. 29, No 3, pp. 211- 215, 1998.
A. Oudjehane, F. Lam and S. Avramidis, “On the process of random and defined structures in wood
composites,” In Proceedings of the International Conference on Composites Engineering (ICCE 4), pp.
761-762, D. Hui Editor, Hawaii, July 6-12, 1997.
A. Oudjehane and M. Fushitani, “Drying and compression under confining pressure effects on structural
rearrangement of wood,” Nihon Reoroji Gakkaishi (Journal of the Society of Rheology, Japan), Vol. 24,
No 2, pp. 63-66, 1996.
A. Oudjehane and J. Raclin, “On the influence of orientation upon the mechanical behavior of oak in a
general state of stress”, Wood Science and Technology, Vol. 29, No 1, pp. 1-10, 1995.
A. Oudjehane, M. Pelletier and J. Raclin, “Non-ideally anisotropic solids behavior under generalized
stress,” Proceedings of the 9th International Conference on Composite Materials, pp. 143 -149, Madrid,
July 12-16, 1993, (ICCM 9).
A. Oudjehane et J. Raclin, “Étude théorique et expérimentale du comportement anisotrope du bois,”
Cahiers de Rhéologie, Vol. IX, No 1, pp. 48-60, mars 1991, Eds: Groupe Francais de Rheologie.
A. Oudjehane et J. Raclin, “Étude théorique et expérimentale du comportement anisotrope du bois,” In
Rhéologie des Matériaux du Génie civil, E. Flavigny Editor November 1990.
PRESENTATIONS:
Oudjehane, A., Innovation in construction. PMI –SAC February diner meeting, Guest speaker series,
February 27, 2014. (http://www.pmisac.com/drupal/node/961)
Oudjehane, A., Value engineering in sustainable construction projects using BIM. Annual conference of
CSVA, Montreal, November 2013.
(http://www.scav-csva.org/conferences.php?id=12&section=conference_detail&pid=89)
Oudjehane, A. and Moeini S., A sustainable strategy in construction project management. PMI – SAC
Annual Conference, Calgary November, 2013.
(http://www.pmisacconference.com/program/schedule//)
Oudjehane, A., Online monitoring of the processing of strand based wood composites: a real time option
for optimized production. In: Proceedings of the International Panel Products Symposium 2009, Nantes,
France, 16-18th September 2009, pp. 165-175.
Oudjehane, A., Innovative processing of beetle killed pine into strand based wood composites. In:
Proceedings of the International Panel Products Symposium 2009, Nantes, France, 16-18th September
2009, pp. 307-311.
A. Oudjehane, “Processing BC’s beetle killed pine into wood based composites: Challenges for
environmental and sustainable development,” IX Colloquium on wood science & Industry, Bordeaux
France, November 2008.
A. Oudjehane and B. Wang, Development of thick MPB strand based strand wood composites, seminar
on mountain pine beetle research initiatives organized by Forestry Innovation Investment – FII, Prince
George BC, June 2007.
Oudjehane, A., Understanding the hot pressing of thick strand based composites, WCB Wood Based
Composites Center meeting, Vancouver, May 2007.
Oudjehane, A., Processing beetle killed pine into strand based composites, Meeting of the SBA
Structural Board Association, Vancouver, April, 2007.
Oudjehane, A., “Innovative Technology: Towards on-line evaluation of structure and performances of
OSB,” OSB International Symposium and exhibition. Niagara Falls, May, 2004.
Y.T. Wang, A. Oudjehane, H. Prion and F. Lam, “Analysis of lateral resistance of wood framed
diaphragms,” Canadian Wood Council (CWC), 2000.
Oudjehane, A., “Manipulation of structure to enhance properties of wood composite panel products,”
Guest speaker at the Fall Meeting of the Structural Board Association, Halifax, October 5-7, 1999.
A. Oudjehane and F. Lam, “Wood composite materials: from the process of a mat to the panel product,”
In Proceedings of the International Conference on Composites Engineering (ICCE 6), Orlando, June 28July 3, 1999.
M. Boulfiza and A. Oudjehane, “On the overall behavior of high fiber volume fractional cementious
composites,” In Proceedings of the International Conference on Composites Engineering (ICCE 6),
Orlando, June 28- July 3, 1999.
A. Oudjehane and F. Lam, “Modeling the profile of engineering properties within random wood based
composite panels,” In Proceedings of the International Conference on Composites Engineering (ICCE 5),
pp. 693-694, D. Hui Editor, Las Vegas, July 5-11, 1998.
A. Oudjehane, F. Lam and S. Avramidis, “Modeling the influence of formation process on properties of
flakeboards,” 51st Forest Products Society Meeting, Vancouver, Canada, June 22- 26, 1997.
Oudjehane, A., “Evolution of material symmetries and structural rearrangement of a natural composite,”
Schloessman Seminar on Biology and Material Science, Mainz, Germany, June 12 14, 1995.
A. Oudjehane and M. Fushitani, “Drying and compression under confining pressure effects on structural
rearrangement of wood,” Pacific Congress on Rheology, Kyoto, Japan, September 26- 30, 1994, (PCR’94).
A. Oudjehane and J. Raclin, “About the relationships structure-deformations in rheology of oak wood,”
65th Annual meeting of the Society of Rheology, Boston, October, 17-21 1993.
A. Oudjehane et J. Raclin, “Remarques sur l’anisotropie du bois,” 11th French Congress on Mechanics,
Lille, September 6-10, 1993.
OUDJEHANE A and J. Raclin, “On the mechanical behavior of oak wood according to its heterogeneous
structure,” Symposium on Advances in Structured and Heterogeneous continua, Moscow, Russia, August
22-26, 1993.
J. Raclin, A. Oudjehane, A. Bottero and I. Lababidi, “Étude expérimentale du comportement mécanique
des milieux anisotropies,” 1st National Congress on Mechanics, Rabat, April 12-15, 1993, (CNM 1).
A. Oudjehane and J. Raclin, “Anisotropic behavior of oakwood under confining pressure,” In Theoretical
and Applied Rheology, P. Moldenaers & al Editors, 1992, Elsevier Publishers, 11th International Congress
on Rheology, Brussels, Belgium, August 17-21, 1992, (ICR 11).
Oudjehane, A., “Contributions théoriques et expérimentales à l’étude du comportement de milieux
poreux anisotropes: le bois,” Thèse de Doctorat de l’Université Blaise Pascal, Clermont Ferrand II, June
1992.
(http://cat.inist.fr/?aModele=afficheN&cpsidt=149139)
Oudjehane, A., “Sur le comportement irréversible d’un milieu poreux consolidé: le bois,” 10th
Universitary Meeting on Civil Engineering, Cachan, May 1992.
J. Raclin and A. Oudjehane, “Yielding and plastic flow of anisotropic consolidated porous medium,” in
Constitutive Laws for Engineering Materials, C.S. Desai & al Editors, 1991, ASME Press, 3rd International
Conference on Constitutive Laws for Engineering Materials, Tucson, Arizona 7-11, 1991.
Oudjehane, A., “Corrélation entre anisotropie mécanique et séchage du bois de chêne”, 9th University
Meeting on Civil Engineering, Reims, April 1991.
Oudjehane, A., “Loi de comportement anisotrope d’un milieu poreux consolidé: le bois séché,” 8th
University Meeting on Civil Engineering, Cergy, May 1990.
Oudjehane, A., “Mesure du seuil de contraintes des graisses en elongation uniaxiale,”DEA de Mecanique
(Rhéologie), Institut Polytechnique de Grenoble (INPG), September 1989.
Oudjehane, A., “Analyse critique du barrage oued kerma,” Thèse d’Ingénieur, École Nationale
Polytechnique d’Alger, ENP, Février 1988.
(http://catalogue.biblio.enp.edu.dz/index.php?css=1&lvl=author_see&id=28560)