ICES Data Centre – DOME (Marine Environment) Updated 16/3- 2015 DOME – Contaminants and biological effects of contaminants in sediment Description of DOME output fields DOME output field MPROG PURPM Country RLABO STATN MYEAR DATE Latitude Longitude Species SEXCO NOINP MATRX NODIS PARGROUP PARAM BASIS QFLAG Value MUNIT VFLAG DETLI LMQNT UNCRT METCU ALABO REFSK METST METPT Description Monitoring programme (cf. MPROG). Multiple programmes are possible separated by “~” (ascii 126) Purpose of monitoring (cf. PURPM) . Multiple purposes possible separated by “~” (ascii 126) Country that has reported the measurement Reporting institude (cf. RLABO) Station name as reported Monitoring year. Note that MYEAR may not always be identical to the year in date of sampling Date of sampling (DD/MM/YYYY) Latitude of measurement (decimal degrees) Longitude of measurement (decimal degrees) Not used in this data type Not used in this data type Not used in this data type Matrix being analysed (cf. MATRX) Not used in this data type Parameter group of measured parameter (cf. PARGROUP) Measured parameter (cf. PARAM) Basis of determination (cf. BASIS) Qualifier flag for measured value, i.e. “<” (cf. QFLAG). Multiple flags possible separated by “~” (ascii 126) Value measured Measurement unit Validity flag, i.e. “S“ suspect value (cf. VFLAG). Multiple flags possible separated by “~” (ascii 126) Detection limit value Limit of quantification Uncertainty value Method of calculating uncertainty (cf. METCU) Analytical laboratory (cf. RLABO) Reference source or key (cf. REFSK) Method of storage (cf. METST) Method of pretreatment (cf. METPT) ICES Data Centre – DOME (Marine Environment) Updated 16/3- 2015 METPS METFP METCX Method of purification/separation (cf. METPS) Method of chemical fixation/preservation (cf. METFP) METOA FORML Test organism SMTYP SUBNO Method of analysis (cf. METOA) Formula used in calculation (cf. FORML) In vivo/In vitro test organism or cell line (cf. VIVIT) Sampler type (cf. SMTYP) Sub-sample identification (can refer to aggregate, grab portion or core slice) Not used in this data type Factors potentially influencing guideline compliance and interpretation of data (cf. FINFL) Multiple factors possible separated by “~” (ascii 126) Reference to analytical method (integer). Can be used to trace additional fields in ICES data systems Reference to the measurement (integer). Unique for the data table Reference to the sub-sample (integer). Unique for a subsample Reference to the sample (integer). Unique for a sample BULKID FINFL tblAnalysisID tblParamID tblBioID tblSampleID Method of chemical extraction (cf. METCX) multiple flags possible (separate multiple entries with “~” (ascii 126))