Doc.XII-2253r3-15
Annual Assembly 2015
Draft Agenda
Commission XII "Arc Welding Processes and Production Systems"
June 29- July 1, 2015
Crowne Plaza, Helsinki, Finland
Monday 29 June 2015, 14.00h – 18.00 h
1. Opening
2. Agenda
3. Brief report on intermediate meeting in USA in April, 2015
4. Presentation of documents:
[1] GMAW Power Source and Process Developments, Classification, Performance and Control
J.Norrish (Australia)
Doc.XII-2235-15
[2] Analysis of welding power – potential of mistakes and measures
S. Pehle, A. Hälsig, M. Kusch, P. Mayr (Germany)
Doc.XII-2229-15
[3] Study on Metal Transfer Control Using Synchronous Control of Wire Feeding and Current
Waveform
T. Era, A. Ide, S. Mizuura, H. Miyahara, S. Hirota (Japan)
Doc.XII-2230-15
[4] Determining characteristics of modern GMAW power sources with short circuiting transfer
G. Huismann (Germany)
Doc.XII-2234-15
1
Coffee Break
[5] Diagnostic process analysis of the submerged-arc by welding high-strength fine-grained
structural steels
U.Reisgen, K.Willms, J.Schäfer (Germany)
Doc.XII-2205-15
[6] Dissimilar joining of Ti3Al-based alloy and Ni-based superalloy by arc welding technology
B-Q. Chen, H-P. Xiong, B-B. Sun, B-R. Du, B. Chen (China)
Doc.XII-2225-15
[7] Relationship between penetration and porosity in horizontal fillet welding by Hybrid Tandem
MAG welding process
Y. Yuan, K. Yamazaki, R. Suzuki (Japan)
Doc.XII-2200-15
[8] In situ experimental measurement of temperature field and surface tension during pulsed
GMAW
R. Monier, F. Thumerel, J. Chapuis, P. Gilles, F. Soulie, C. Bordreuil (France)
Doc.XII-2233-15
[9] Laser-Enhanced Ar-GMA Welding
T.Nakamura (Japan)
Doc. XII-2227-15
Tuesday 30 June 2015, 8.30 h -17.00 h.
Joint Meeting of Comm.I, Comm.IV, Comm.XII and SG212
Morning Session 8.30h-12.30h
Visit from IIW secretariat: Dr.C.Mayer, IIW-CEO
Brief report of IIW Journal “Welding in the World”: Prof.I.M. Richardson, Chief editor
[10] Metal penetration in TIG, laser and hybrid spot welding: Experimental study and Mathematical
modeling
U. Reisgen, I. Krivtsun, O. Mokrov, A. Zabirov (Germany)
Doc. XII-2218-15/IV-1237-15/212-1362-15/I-1227-15
2
[11] Laser cladding of high Co-Ni secondary hardening on 18Cr2Ni4WA steel
R. Qin, S. Guo, H. Xiong, X. Zhang, S. Tang, W. Li (China)
Doc.XII-2226-15/IV-1249-15/212-1394-15/I-1228-15
[12] Influence of Metal Types for Fatigue Strength of Electron Beam Weld Joint with Thin Steel
Plate
T.Nagai, R.Kasai, K.Ueno, M.Mochizuki, T.Suga (Japan)
Doc.XII-2213-15/IV-1250-15/212-1391-15/I-1229-15
[13] A Study on Ray Tracing Method for CFD Simulations of Laser Keyhole Welding: Progressive
Search Method
S-W. Han, J. Ahn, S-J. Na (Korea)
Doc. XII-2241-15/IV-1251-15/212-1379-15/I-1230-15
[14] Arc interaction in tandem GMAW process and stabilization by central filler wire
M. Häßler, S. Rose, U. Füssel (Germany)
Doc. XII-2242-15/IV-1252-15/212-1382-15/I-1231-15
Coffee break
[15] Influence of Gas Mixtures in Laser Arc Hybrid Welding of Pipeline Steel
A. Ramasamy, M. Amirthalingam, W.J. Suder, S. Ganguly, S. Williams, I.M. Richardson
(Netherlands)
Doc. XII-2246-15/IV-1244-15/212-1395-15/I-1232-15
[16] Using Hot-Wire GMAW with different filler wire composites for reducing the hazardous
substances in welding fumes
A. Heinitz, S. Rose, U. Füssel (Germany)
Doc. XII-2243-15/IV-1253-15/212-1383-15/I-1233-15
[17] Laser-Arc Hybrid Welding Phenomena of Thick High-Tensile Strength Steel Plates
Q. Pan, M. Mizutani, Y. Kawahito, S. Katayama (Japan)
Doc. XII-2245-15/IV-1236-15/212-1396-15/I-1234-15
[18] Fatigue strength of hybrid welded 22MnB5 overlap joints
H. Kügler, F. Möller, S-F. Goecke, F.Vollertsen (Germany)
Doc. XII-2247-15/IV-1254-15/212-1397-15/I-1235-15
3
Afternoon Session 14.00h-18.00h
[19] Evaluation and comparison of gas trailing shield concepts using diagnostic and numerical
methods
S. Jäckel, M. Hertel, S. Rose, U. Füssel (Germany)
Doc. XII-2244-15/IV-1255-15/212-1384-15/I-1236-15
[20] Investigation of laser-arc hybrid welding utilizing CMT, effects upon oxygen and nitrogen
contents as well as the weld stability due to oxygen contents of the shielding gas and gap
oxides
J. Frostevarg (Sweden), Q.M. Mizutani, Y. Kawahito, S. Katayama (Japan)
Doc. XII-2248-15/IV-1247-15/212-1398-15/I-1237-15
[21] Examples of industrial cases of additive manufacturing of metal parts
V. Kujanpää (Finland)
Doc. XII-2252-15/IV-1256-15/212-1399-15/I-1226-15
[22] Additive Manufacturing of Ceramics and Metals Components by Using Laser Scanning and
Micro Pattering Stereolithography
S. Kirihara (Japan)
Doc. XII-2237-15/IV-1257-15/212-1392-15/I-1238-15
Coffee break
[23] Additive Manufacturing of Metals Using L-PBF and DED
I.Harris (USA)
Doc. XII-2239-15/IV-1258-15/212-1393-15/I-1239-15
[24] 3D Laser powder deposition welding with a coaxial configuration of a diode laser and a central
powder feeding
N. Brocke, M. Schnick, R. Jüngling, V. Krink (Germany)
Doc. XII-2249-15/IV-1249-15/212-1400-15/I-1240-15
[25] (U) Status of AWS D20.1 Committee Fabrication of Additively Manufactured Parts
D.Kautz, T. Palmer, P. Hochanadel, A. Alonso (USA)
Doc. XII-2250-15/IV-1259-15/212-1401-15/I-1224-15
4
[26] Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with
ABS-M30
F. Knoop, V.Schoeppner (Germany)
Doc. XII-2251-15/IV-1260-15/212-1402-15/I-1225-15
Wednesday 1 July 2015, 14.00 h -18.00 h.
[27] Near-net-shape Manufacturing of T-joint by Welding with a Trailing Reverse-side Gas Heating
T. Tsuyama, Y. Kotani, S. Okano, S. Kobayashi, M. Mochizuki (Japan)
Doc. XII-2201-15
[28] Application of Controlled GMAW-Technology for Manufacturing of a Thick-Walled
Longitudinal Weld Pipe made of Highly Heat Resisting Nickel-based Alloy 617
U. Reisgen, K. Willms, S. Jochindke (Germany)
Doc. XII-2207-15
[29] Cold metal transfer joining of AZ 31 Mg alloy to steel sheets with various coating conditions
M. Kang, C. Kim (Korea)
Doc. XII-2231-15
[30] Cutting and welding technology for thick steel plates constructions in wind tower production
M. Dreher, M. Schnick, V. Krink (Germany)
Doc.XII-2238-15
[31] Process control of plasma arc welding via sensing keyhole exit position
C.S. Wu, G. Zhang, Z. Liu (China)
Doc.XII-2232-15
Coffee Break
[32] Simulation of GMA welding using practice-oriented software SimWeld3
U. Reisgen, O. Mokrov, A. Zabirov (Germany)
Doc. XII-2219-15/IV-1238-15/212-1363-15
[33] Development of low hydrogen welding process for gas shielded arc welding
N.Kawabe, T.Maruyama, K.Yamazaki, R.Suzuki (Japan)
Doc.XII-2236-15
5
[34]In-situ temperature determination of MAG welding and its application for heat input control
S-F. Goecke (Germany), Y. Ogino, Y.Hirata (Japan)
Doc.XII-2254-15
[35] Energy balance of welding processes
A. Hälsig (Germany)
Doc.XII-2228-15
[36] Discussion on thermal efficiency and heat input
J.Norrish (Australia)
Doc.XII-2240-15
5. Recommendation of publication for IIW Journal “Welding in the World”
6. Miscellaneous
7. Date and place of next meeting
8. Closure
6