OPERATING MANUAL
For electronic lock 101.120 - “Ell cam 2.0”
With capacitive keyboard
Dear customers, Mauer Locking Systems Ltd. congratulates you on the purchase of the electronic lock Ell-cam 2.0 and
greets you with the choice you made. You will have the opportunity to convince yourselves in a series of its advantages, such
as:
 Small overall dimensions and easy mounting;
 Capacitive keyboard with modern technology, touch sensitive.
 Possibility to choose between three versions of software.
 „Micro USB“ plug for emergency power supply.
 An extremely low power consumption;
 Electronic emergency key for opening.
PACKAGING:
1. Lock 101.120 – “Ell cam 2.0”
2. Screw М4х8
3. Nut М18x1
4. Stand-up cam
5. Nut М8x1
6. Spring washer 8
7. Electronic emergency key
8. Micro USB cable
9. Emergency power supply


o
o
o



- 1 pcs.
- 1pcs.
- 1pcs.
- 1pcs.
- 1pcs.
- 1pcs.
- 1pcs (option)
- 1pcs (option)
- 1pcs (option)
GENERAL INSTRUCTIONS:
The lock has three codes: User code, Master code and Service code.
The fabric codes are:
User code: 1, 2, 3, 4.
Master code: 1, 2, 3, 4, 5, 6.
Service code: 7, 7, 8, 8, 9, 9.
Entering of Master code is done by pressing simultaneously buttons 1 and 9.
Entering of Service code is done by pressing simultaneously buttons 2 and 0.
Each entering of digit is indicated by a single sound and light signal (blue/green/red).
After installing the lock immediately change the fabric codes.
Forgotten “Master code” or ”Service code” can be restored only by Mauer Locking Systems authorized personnel.
 The lock has three versions of the software - (1) changing users (2) permanent users, and (3) restricted users. Switching
between the versions happens only with closed lock by means of the service code. When switching between the
versions, the fabric USER CODE is restored.
 Version (1) changing users – during each locking a different client code can be entered. Opening is performed by using
the same code, used for locking. The light signal is blue and red.
 Version (2) permanent users – the client code is being programmed in advance. Opening is performed by using the code,
and locking – by pressing „0“. Green and red light signal appears.
 Version (3) limited users – for each locking a different client code can be entered. Opening is performed by entering the
code used for locking. After a certain pre-programmed time, the lock cannot be opened with the code with which is closed, but
only with master code. The light signal is blue and red.
When entering digits place your finger so that it fits tightly into the shape around the digit. There is no need to press heavily.
Do not slide your finger between the numbers, but lift at least 2-3mm and then tap the next digit.
Variant „Changing users“
OPENING
1. Enter the 4-digit client code, used for closing the lock. When opening for first time, enter the fabric user code – 1,2,3,4.
2. After the last entered digit, and if the code is correct, you will hear an ascending sound signal and the blue light flashes.
The lock is unblocked.
3. Within 3 seconds after the unblocking, turn the handle to open the lock. After opening you will hear descending sound
signal and flashing of the red light. The lock is opened and blocked.
LOCKING
1. Enter the 4-digit client code.
2. After entering the last digit you will hear ascending sound signal along with flashing of the blue light. The lock is unblocked.
3. Within 3 seconds after the unblocking, turn the handle to close the lock. After closing you will hear descending sound signal
along with flashing of the red light. The lock is closed and blocked.
CAUTION: If while entering the code you press a wrong key, wait 6 seconds and start procedure again from the beginning.
After entering a wrong code, you will hear descending sound signal, along with flashing of the red light. After the entering wrong
code 4 times, the lock blocks the possibility of code entering for 30 seconds.
SERVICE CODE
The service code is used for changing the software between Version (1) – changing users, Version (2) – permanent users and
Version (3) – restricted users.
1. Press simultaneously buttons 2 and 0, with lock closed. You will hear triple sound signal along with triple flashing of the
blue/green light.
2. Enter the service code (fabric code is 778899). After entering the last digit you will hear triple sound signal along with
flashing of the blue/red/blue light. You have the following options:
- to activate Version (1) – changing users, press „1“. The light signal changes to blue/red.
- to activate Version (2) – permanent users, press „2“. The light signal changes to green/red.
- to activate Version (3) – limited users, press „3” thereafter press number from 1 to 9 indicating after how many hours the lock
not to open with the code used for locking. The light signal changes to blue/red.
- for changing of the service code press „0“. Enter the new 6-digit service code. The red light flashes. Re-enter the new code.
The lock turns off and the new master code is accepted.
Version „Permanent users“
OPENING
1. Enter the 4-digit user code. When opening for first time, enter the fabric user code – 1,2,3,4.
2. After entering the last digit, and if the code is correct, you will hear an ascending sound signal and green light will flash.
The lock is unblocked.
Within 3 seconds after the unblocking, turn the handle to open the lock. After opening you will hear a descending sound signal
and a red light will flash. The lock is opened and blocked.
CHANGE OF USER CODE
The user code can be changed only when the lock is opened.
1. Press simultaneously buttons 1 and 0. You will hear three sound signals along with three flashings of the green light.
2. Enter the new 4-digit user code. Red light flashes. Re-enter the new code. The lock switches off and the new code is
accepted.
LOCKING
1. Press "0". You will hear an ascending sound signal along with green light flashing. The lock is unblocked.
2. Within 3 seconds after the unblocking, turn the handle to close the lock. After closing you will hear descending sound signal
along with red light flashing. The lock is closed and blocked.
OPTION „Limited users“
Opening and locking is performed identical to "Changing users”. If the lock is closed, after expiry of the pre-programmed time,
the lock will not open with the client code. It should be opened by using the master code and wait the time needed for changing
of the master code to expiry.
MASTER CODE
The master code serves to open the lock if the user code is unknown. After opening, the user code could be changed or saved
(see Note).
1. Press buttons 1 and 9 simultaneously. You will hear triple sound signal along with triple flashing of the blue/green light.
2. Enter the master code (the fabric code is 123456). After the last entered digit you will hear three sound signals while the
blue/red/blue (green/red/green) flashes. The lock is unblocked.
3. Within 3 seconds after the unblocking, turn the handle to open the lock. After opening you will hear descending sound
signal and red light flashing, followed by flashing of blue/green light. The lock is opened, blocked and in mode for change of the
master code. This mode continues for 6 seconds.
- if you intend only to open the lock, wait 6 seconds for the mode to expiry;
- if you intend to change the code, enter the new 6-digit master code. Red light flashes. Re-enter the new code. The lock turns
off and the new master code is accepted.
NOTE: ONLY IN VERSION „Changing users“ and „Limited users“ the lock can be closed by master code. In this case the
client code is saved.
POWER SUPPLY AND BATTERY CHANGE
The lock operates with 3 batteries „ААА“. When it is necessary to replace them: release screw М4 and nut М18х1. Take off
the compartment cover and change the batteries, keeping the polarity. Close the cover and tighten nut М18х1 and screw М4.
Always use alkaline batteries.
CAUTION: If the batteries voltage is too low (the batteries are low), after entering the correct code and turning the handle you
will hear three sound signals along with three flashings of yellow/red/yellow light signals. There is still enough power to open the
lock another 50 times approximately. The light stopping should not be considered as batteries recovery, so they should be
replaced opportunily.
If wrong code is entered, the signalization for low batteries is after the wrong code signal.
If the batteries are fully depleted, slide the battery cover located at the bottom of the lock to access the micro USB coupling of
the lock. Place the micro USB coupling of the cable into the lock. The cable should be connected to the emergency power supply
or to a laptop, tablet, and other devices providing 5V through USB.
Enter the code and open the lock. Change the batteries following the described manner. Slide the cover back in order to block
the lock coupling compartment.
PROGRAMMING OF EMERGENCY ELECTRONIC KEY
Emergency electronic key serves to open the lock. One key can be programmed to open an unlimited number of locks. At one
point, the lock can only have one emergency key.
The lock should be in closed position when programming the emergency key. Slide the cover located at the bottom of the lock
to access the micro USB coupling. Insert the micro USB coupling of emergency key in the lock and enter the service code
(remember that the service code is entered by pressing buttons 2 and 0 simultaneously). The light signal is constant yellow and
blue (green) light. Yellow light indicates that the lock has recognized the emergency key.
After entering the service code for programming the emergency key, press "9". You will hear three ascending sound signals
and then the lock will turn off. Eject the key and slide the cover back to close the micro USB coupling. The emergency key is
programmed.
OPENING WITH THE ELECTRONIC EMERGENCY KEY
Place the programmed emergency key in the lock micro USB coupling and press "0". Yellow and blue (green) light flash
simultaneously, the lock is unlocked and can be opened.
In case of forgotten codes and low batteries, insert the programmed emergency key in the lock coupling, connect the other
end of the cable to the emergency power supply and press "0". The lock will unlock and can be opened in order to change the
batteries.