黃馨慧教授歷年著作一覽表
一 . 期刊論文
1. Chen, Y.C., Huang, H. H.*, Lin, J.B.,Application of vector finite screw analysis to
determine the roll centre from wheel points, Proc. IMechE Vol. 225 Part C: J. Mechanical
Engineering Science, pp.2586-8596.(Accept on 21 March,2011)
2. Huang, H. H*., Chen, F. C., 2010, Analysis and Application of Blocking Movement of
Variable Chain, Machine Design and Research, pp.231-234. (ISSN 1003-2343)
3. Huang, H. H*., Chen Yong Chang, Guan-zhi Liu, 2010, Discussion on Simulated
Application of Vehicle Suspension System Design, Machine Design and Research, pp.227-230.
(ISSN 1003-2343)
4.
Chen, F. C., Tzeng, Y. F., Huang, H. H., 2010, On the Derivation and Simulation of the
Equation of Motion for Crank-Rocker Mechanism, Machine Design and Research, pp.67-70.
(ISSN 1003-2343)
5.
Chen, F. C. and Huang, H. H., 2006,“Taguchi-Fuzzy-Based Approach for the Sensitivity
Analysis of a Four-BarFunction Generator,” Proc. of IMechE, Journal of Mechanical
Engineering Science, Vol.220, No.9, pp.1413-1421. (SCI, EI)( NSC 94-2212-E-168-006)
6.
Chen, F. C. and Huang, H. H., 2005,“TheUseofFuzzyLogicsintheTaguchiMethodforthe
Determination of the Tolerance of a Six-BarHingeMechanism,”Transactions of the CSME,
Vol.29, No.3, pp.477-489. (SCI, EI)(NSC 94-2212-E-168-006)
二 . 研討會論文
(一) . 國外研討會
1. Yna, H. S., Huang, H. H.*, "On the Attendees of 2004-2007 Activities of IFToMM Permanent
Commission for History of Machines and Mechanisms Science", 13th World Congress in
Mechanism and Machine Science, Guanajuato, México, 19-25 June, 2011.
2. Hsu. M. H., Huang. H. H., Kuo, H. P., Hsueh, Lin, P. Y., "Topological Structure Designs of
Front Crank Type Elliptical Motion Exerciser", 13th World Congress in Mechanism and
Machine Science, Guanajuato, México, 19-25 June, 2011.
3. Huang, H. H*, Tseng, C. Y., Weng, C. Y., "A Conceptual Design of Eight-bar Linkage
Hardtop Roof", The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium
& Exhibition, EVS-25 Shenzhen, China, Nov. 5-9, 2010.
4. Wang, B. T., Chen Y. C., Huang, H. H., and Chen, Y. C., "Model Verification and
Structural Stiffness Evaluation for Utility Vehicle Frame Structure", The 25th World
Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, EVS-25
Shenzhen, China, Nov. 5-9, 2010.
5. Huang, H. H.*, Chen, F. C., 2010, "Analysis and Application of Blocking Movement of
Variable Chain", 2010 International Mechanisms and Machine Science Conference
(CCMMS2010), pp.231-234. (ISSN 1003-2343)
6. Huang, H. H.*, Chang, C. Y., Liu, G.. Z., 2010, "Discussion on Simulated Application of
Vehicle Suspension System Design", 2010 International Mechanisms and Machine Science
Conference (CCMMS2010), pp.227-230. (ISSN 1003-2343)
7. Chen, F. C., Tzeng, Y. F., Huang, H. H., 2010, "On the Derivation and Simulation of the
Equation of Motion for Crank-Rocker Mechanism", 2010 International Mechanisms and
Machine Science Conference (CCMMS2010), pp.67-70. (ISSN 1003-2343)
8. Tsai,H. H., Chen, L. W., Tsai, C. H., Huang, H. H, Nov.13-16, 2009, "On Smart Magnetic
Fluids in Externally Applied Non-uniform Radial Magnetic", Asian Pacific Conference for
Materials and Mechanics,Yokohama, Japan.
9. Huang H. H.*, “Graph representation of the variable chain Mechanisms with Sequential
movement “,13th Multiconference on Systemics, Cybernetics and information. 2009..
10. Huang H. H*., Yi-Ming Lin, 2008, “MultipleBolts as Security Devices“,International
Symposium on History of Machines and Mechanisms, 11.10-14.2008.
11. Huang H. H*., Yan H.S., Yi-Ming Lin, 2008, “TheDesignofNewTypeMultipointMortise
Locks”, ASME 2008 International Design Engineering Technical Conferences & Computers
and Information in Engineering Conference, August 3-6, 2008, NY, USA, DETC200849337.( NSC 95-2622-E-168 -016 -CC3)
12. Yan H.S., Huang, H. H., Kuo C.H., June 18-21, 2007, “HistoricMechanism
TeachingModels inTaiwan”,12th IFToMM World Congress, Besançon (France).
13. Huang, H. H.*, 2006,“RepresentationoftheVariableChainMechanismswithSequential
Movement,”ASME2006InternationalDesignEngineeringTechnicalConferences& Computers
and Information in Engineering Conference, September 10-13, 2006, Philadelphia,
Pennsylvania, USA, DETC2006-99300.
14. Chen, F. C. and Huang, H. H., 2005,“Application of Taguchi Method on the Tolerance
Design of a Four-Bar Function Generation Mechanism,”2005 ASME DETC 29th
Mechanisms and Robotics Conference, September 24-28, Long Beach, CA, DETC200584199. (NSC93-2212-E-168-022)
(二) . 國內研討會
1. 黃馨慧，劉冠志，林盟軒，林佳賓，2010.12.11，半拖曳臂式懸吊機構靈敏度與最佳
化之 研究，中國機械工程學會第二十七屆全國學術研討會，國立台北科技大學機械工程
學系， 臺灣，臺北市。
2. 黃馨慧，林盟軒，林佳賓，2010.11.26，撓性元件對車輪轉向幾何運動參數之影響，
中華 民國第十五屆車輛工程學術研討會， 南台科技大學機械工程系，臺灣，臺南。
3. 黃馨慧，曾全佑，劉法致，許立杰，2010.10.22，停車輔助系統設計，第13屆全國機
構與 機器設計研討會，國立台灣大學機械工程學系，臺灣，臺北。
4. 黃馨慧，劉法致，劉進展，2009.11.06，嵌入底盤式停車輔助機構之概念設計，中華
民國 第十二屆全國機構與機器設計研討會，中正大學，台灣，嘉義。
5. Huang, H. H.* and Chen, F. C, 2007.11 “A method for Representing the Variable Chain
Mechanisms with Sequential Movement,”Proceedingsofthe10th National Conference on the
Design of Mechanisms and Machines, TaiChung. (NSC NSC 95-2221-E-168 -011 -)
6. Chen, F. C., Chen, W. Z., Hsu, M. H., and Huang, H. H., 2007.11, The Use of Taguchi
Method and Principal Component Analysis and Logics for the Sensitivity Analysis of a DualPurpose Six-Bar Mechanism, Proceedings of the 10th National Conference on the Design of
Mechanisms and Machines, TaiChung. (NSC 95-2221-E-168-010)
7. Huang, H. H.*, H.S Yan, and Y. M. Lin, 2007.11,”Thedesignof New type Multipoint
Mortise Locks”, The 24th National Conference on Mechanical Engineering, Chung Li. (NSC
95-2622-E-168-016-CC395WFDA700061)
8. Chen, F. C., Chen, W. Z., Hsu, M. H., and Huang, H. H., 2006, The Use of Taguchi Method
and Principal Component Analysis for the Sensitivity Analysis of a Dual-Purpose Six-Bar
Mechanism, Proceedings of the 9th National Conference on the Design of Mechanisms and
Machines, Kaoshiung, pp.203-210. (NSC 95-2221-E-168-010)
9. Chen, F. C., Liu, N. T. and Huang, H. H., 2005, “TheUseofTaguchiMethodsandFuzzy
Logics for the Sensitivity Analysis of a Four-BarHingeMechanism,”Proceedings of the 8th
National Conference on the Design of Mechanisms and Machines, Taipei, TAIWAN, pp.280287. (NSC 92-2212-E-168-011)
三 . 專著及專書論文
1. 顏鴻森，黃馨慧 ，郭進星著，臺灣古董機構模型 (Antique Mechanism Models in
Taiwan)，國 立成功大學博物館，ISBN 978-986-01-3948-8。
2. 顏鴻森著，謝龍昌，徐孟輝，瞿嘉駿，黃馨慧譯，劉俊佑校，機械裝置的創意性設
計，東 華書局，2005。