FURNITURE FOR ACADEMIC BLOCK OUT OF DMU PROJECT.
S.#
Name of
Article
1
Steel Almirah
2
Study Table
3
Study Chair
4
Books Racks
5
Sofa Sets
6
Chair
7
Office Table
8
Side Racks
Specifications
Overall Size:- 36” x 18” x 72”
Made of mild steel sheet of 22 Gauge with 2Nos lockable doors (imported lock), one
handle, inside having 4-shelves (5 parts) with
legs 4” height as per design. Complete
finished with N.C.Deco Hammer Paint.
Table top 36mm thick in shisham-wood
veneered both sides over 600 density chip
board, size 3’x3’, solid shisham wood frame
with 2”x2” solid shisham-wood legs, finished
in sealer and lacquer spray polish.
Library chair (with-out arms): complete solid
shisham-wood chair, finished in sealer and
lacquer spray polish, upholstery of seat and
back in leatherite 502-21
Library Rack: Made of 18mm shisham-wood
veneered both sides over 600 density
chipboard and back closed, size 84”x48”x12”,
with six shelves, finished in sealer and
lacquer spray polish
Office Type Sofa: (two seater) with quality
no.1 foam, fully covered with leatherite 50221
Solid shisham wood chair with arms, seat and
back in made in wooden frame, number 1
quality foam, upholstery with leathrite 502-21
Office Table (2-Drawers Lamination):
Overall Size:- 1200x600x760mm (H)
Metal Structure Size:- 1180x550x730mm,
Structure made of mild steel square pipe
25x25mm (Mild steel/cold rolled IIL Karachi)
wall, thick 1.2mm. Having 04-nos rubber
shoes 25x25mm good
Length: - 820 mm, Width: - 390 mm, Height:
- 760 mm, Structure made of 18 mm thick
high density chipboard pressed with
lamination sheet on both sides with one shelf
fixed. Edged covered with shisham veneer
and visible parts of shisham, veneer finished
wit
Qty
28
100
400
320
6
270
38
62
Rate
Total
Cost
9
Steel Beds
10
Teacher Desk
11
Computer
Table ( for
Computer
science)
12
Computer
Chair
13
Lab Tables
14
Stools
15
Center Table
Material: Iron Pipe (Circular Pipe) Cold Rold
Steel, Thickness: 18 SWG Gauge. Woven
with Plastic 1.5 inch best quality Plastic
Cane/strips, 4 No. Rubber shoes 25 x 25 mm
good quality for each bed.
Teacher’s Table: Made of 18mm shishamwood veneered both sides over 600 density
chipboard, one side 3 drawers, top size 6’x21/2’, frame made of 25mmx25mm square
pipe (18 guage), frame n.c. spray painted over
anti-rust coat.
Computer Table: top in 18mm shisham-wood
veneer over 600 density chipboard, key-board
tray, cpu slot, finished in sealer and lacquer
spray polished, size 4’x2’, frame
25mmx25mm steel square pipe frame (18
gauge), frame n.c. spray painted over anti-rust
c
Overall Size:- standard, Seat size wooden:480x420x20mm (shaped). Back size
wooden:- 400x400x20mm(shaped). Seat and
back made of solid seasoned wood. Seat &
back properly cushioned having rubber strips
with raw cotton filling fixed with 1st quality
foam
Overall Size:- 1525 x 915 x 760mm(H).
Structure size:- 1475 x 865x730mm(H). Table
Structure made of 38x38mm mild steel square
pipe wall thick 1.2 mm, pipe (Mild
steel/cold rolled lIL Karachi). Metal structure
finished with N.C. Silver Paint. Top made of
2
Stool: Round/square shaped, size 15”
diameter or 15”x15” square, leatherite 502-21
upholstery with number 1 foam, frame
20mmx20mm square steel pipe frame, 24”
height, frame n.c. spray painted over anti-rust
coat.
Centre Table: Top made of 18mm shishamwood veneer over 600 density chipboard,
frame made of solid shisham wood with legs,
side rail and centre rail, finished in sealer and
lacquer spray polished, size 4’x2’.
8
24
20
20
52
200
13
16
Tablet Chair
Tablet Chair: Frame made of 20mm x 20mm
(18 guage) steel square pipe nc spray painted
over anti-rust coat, with one side writing arm
made of 18mm thick mdf 750 density board,
seat, lower rack and back made from shisham
wooden strips, finished in sealer an
200