GROUNDS FLAMMABLE GOODS STORE
Location/s
OIL & FUEL
Type of Kit
This stock list has been chosen to match chemicals or substances used or stored in
this QUT work area. Audit tags should be intact unless the bin has been used.
If audit seal tags have been broken, please report it to your supervisor.
Please use this list to order replacement stock following any spill cleanup.
Min Qty
in Kit
Qty for
Restock
Sizes/
Volumes
Item
1 pr
Red Heavy duty Neoprene gloves
1 pr
Green Nitrile gloves
1 pr
Safety chemical goggles
1 pr
Tyvek disposable overalls
1
P2 Dust /Mist respirator
1
Dust pan and brush
1
Plastic scoop ( for spreading or
collecting absorbent material)
5
100 um Plastic Waste Disposal bags
1 roll
Caution – Spill Area barricade tape
2
Envirosorb boom/snake (long)
2 mtr
2
Envirosorb boom/snake ( short)
1.2 mtr
2
Absorbent pillows
50
1
XLarge
1.4 x 0.5
m
50 mt x 75
mm
Envirosorb Absorbent pads
2
28 lt bags
(total
100Lt)
1 on site
HELD IN MAINTENANCE STORE AT KG
Urethane Stormwater Drain Covers
0.9 m x 0.9
m
1
Wall mounted Spill Station sign
4 bags
Global Peat™ Absorbent
Consumables stock sources:
1
2
Envirosorb products available from Global Spill Control Ph: (07) 5564 5040 or 0432 699
Global Peat available from Global Spill Control Ph: (07) 5564 5040 or 0432 699
Document1 V1:11
Notes
23/5/11
Organic cellulose absorbent
for oils/fuels/sewage/
protein fluids. Non leachingcan be disposed into normal
waste disposal and landfill.
Wash with warm soapy water
after use, dry and wrap in
plastic sheet provided.
Replace in carry kit.
MINI BOOMS
Use booms to contain, absorb or divert spills from drains.
•
Overlap boom ends to increase length
•
Surround leaking containers or drums to prevent spill from spreading
•
Use booms to absorb spilt liquid
•
Divert the spill away from drains, stock or equipment to an area where the
spill can be safely cleaned up
•
Protect drains by placing booms in front of or around the drain
•
If spill is on a slope where volume and velocity ( speed) may be a factor,
place booms at an angle of 450 to deflect the liquid to an area where it can
be safely contained and recovered.
•
PILLOWS
•
•Use pillows to contain and absorb the spills
Use Pillows to absorb spilt liquid.
•
•
Placed behind booms to absorb seepage of contained liquid.
••
Place pillows under dripping pipes or leaking valves.
••
Plug small drains or holes to prevent the spill spreading under machinery
and storage pallets
•
PADS
•
•Use pads to absorb and clean up the spills
••
Use Pads to absorb spilt liquid.
••
Placed pads behind booms to absorb seepage of contained liquid.
••
Place pads under dripping pipes or leaking valves.
••
Use pads to wipe down clothing, hands, floors, containers, drums etc
contaminated by spill
•
•
GROUND AND FLOOR ABSORBENTS
•
•Global Peat™, Unisorb™( Global Spill Control), Ecosweep™ (Ecospill) .
•Use the ground and floor absorbent in kit to absorb spill.
•
Spread the absorbent onto and in front of the spill.
••
Work the absorbent into the spill with a broom or shovel.
Use the absorbent to absorb and solidify large volumes of spilt liquid.
••
•
DISPOSAL
BAGS
•
For use in the clean up stage
•
•
Place used absorbents into disposal bag
••
Only half fill disposal bag, then tie off with a knot for transportation.
••
Do not place partly used absorbents back into spill kit
•
Partly used absorbents can be labelled and placed next to the spill kit
•
PERSONAL
SAFETY EQUIPMENT
•
Use for personal protection
•
•
Dress in appropriate protective clothing when attending to a spill
••
Use PPE such as gloves when handling spill material
•
Ensure spill kit PPE is adequate for the type of spilt liquids in cleanup.
•
•
•
23/5/11
• Document1 V1:11
Contact FM Sustainability Officer
for Waste disposal advice.
Dispose of contaminated
absorbent only in
accordance with Local or
State Regulations