SECTION 14240
HYDRAULIC ELEVATORS
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2014 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
1.2
SECTION INCLUDES
A.
Telescopic holeless hydraulic elevators, front mounted jack.
B.
Telescopic holeless hydraulic elevators, dual piston.
RELATED SECTIONS
A.
Section 01500 - Temporary Facilities and Controls: Protection of floor openings and
personnel barriers; temporary power and lighting.
B.
Section 02300 - Earthwork: Excavation of elevator pit.
C.
Section 03300 - Cast-in-Place Concrete: Elevator pits.
D.
Section 03600 - Grouts: Grouting door frames.
E.
Section 04200 - Masonry Units: Setting sleeves, inserts, and anchoring devices in masonry
for guide-rail brackets.
F.
Section 05120 - Structural Steel: Support steel, divider beams, and hoist beams.
G.
Section 05510 - Metal Stairs and Ladders: Ladders, supports for entrances in drywall
hoistways.
H.
Section 07160 - Cementitious Waterproofing: Waterproofing of elevator pit.
I.
Section 09290 - Gypsum Board: Hoistway walls.
J.
Section 09600 - Flooring: Finished flooring in elevator cars.
K.
Section 09900 - Paints and Coatings: Field painting of elevator entrances over primer.
L.
Section 13850 - Detection and Alarm: Heat, smoke, and products of combustion sensing
devices, fire alarm signal lines to contacts in machine room.
M.
Section 15440 - Sump Pumps: For sump pumps, sumps and sump covers in elevator pits.
N.
Section 15700 - Heating, Ventilating, and Air Conditioning Equipment: Heating, cooling, and
ventilation of machine room and machinery space.
14240-1
1.3
1.4
O.
Section 16100 - Wiring Methods: Light outlets, convenience outlets, light switches, and
conduits.
P.
Section 16120 - Cables and Conductors: For telephone service for elevators and for Internet
connection to elevator controllers for remote monitoring.
Q.
Section 16440 - Switchboards, Panelboards, and Control Centers.
R.
Section 16500 - Lighting: Light fixtures.
S.
Section 16720 - Telephone and Intercommunication Equipment: Telephone outlets and
elevator telephones.
REFERENCES
A.
ANSI/ASME A17.1/CAN/CSA B44 - Safety Code for Elevators and Escalators.
B.
BADAAG - Americans with Disabilities Act Accessibility Guidelines.
C.
CANSI/NFPA 70 - National Electrical Code.
D.
ANSI/NFPA 80 - Fire Doors and Windows.
E.
ANSI/UL 10B - Fire Tests of Door Assemblies.
F.
CAN/CSA C22.1 - Canadian Electrical Code.
G.
Model and Local Building Codes.
H.
ISO 9001-2000 - Quality Management Systems - Requirements.
DESIGN REQUIREMENTS
A.
1.5
Arrange elevator components in machine room so equipment can be removed for repairs or
replaced without dismantling or removing other equipment components.
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Submit manufacturer/installer's shop drawings, including plans, elevations,
sections, and details, indicating location of equipment, loads, dimensions, tolerances,
materials, components, fabrication, fasteners, hardware, finish, options, accessories, and
other information to render totally functional elevators.
D.
Selection Samples: For each finish product specified, two complete sets of color chips
representing manufacturer's full range of available colors and patterns.
E.
Verification Samples: For each finish product specified, two samples, minimum size 6 inches
(150 mm) square representing actual product, color, and patterns.
F.
Operation and Maintenance Manual: Submit manufacturer/installer's operation and
maintenance manual; including operation, maintenance, adjustment, and cleaning
instructions; trouble shooting guide; renewal parts catalogs; and electrical wiring diagrams.
14240-2
G.
1.6
1.7
QUALITY ASSURANCE
A.
Manufacturer/Installer's Qualifications: Specialize in manufacturing and installing elevator
equipment, with a minimum of 10 years successful experience.
B.
Installer Qualifications: Minimum 2 years experience installing similar products.
C.
Regulatory Requirements:
1.
Elevator design, clearances, construction, workmanship, materials, and installation,
unless specified otherwise, shall be in accordance with ANSI/ASME A17.1, handicap
accessibility, Americans with Disabilities Act, and other codes having legal jurisdiction.
2.
ANSI/ASME A17.1 shall govern, except where codes having legal jurisdiction that
include more rigid requirements or conflict with ANSI/ASME A17.1.
3.
Elevator shall follow design and manufacturing procedures certified in accordance
with ISO 9001-2000 to meet product and service requirements for quality assurance
for new products.
D.
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and
application workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship is approved by Architect.
3.
Refinish mock-up area as required to produce acceptable work.
PRE-INSTALLATION MEETINGS
A.
1.8
1.9
Warranty: Submit manufacturer/installer's standard warranty.
Pre-installation Meeting:
1.
Convene pre-installation meeting before start of installation of elevators.
2.
Require attendance of parties directly affecting work of this section, including
Contractor, Architect, and elevator manufacturer/installer.
3.
Review examination, installation, field quality control, adjusting, cleaning, protection,
and coordination with other work.
DELIVERY, STORAGE, AND HANDLING
A.
Delivery: Deliver materials to site in manufacturer/installer's original, unopened containers
and packaging, with labels clearly identifying product name and manufacturer/installer.
B.
Storage: Store materials in clean, dry area indoors in accordance with
manufacturer/installer's instructions.
C.
Handling: Protect materials during handling and installation to prevent damage.
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer's recommended limits.
B.
Temporary Electricity:
1.
Temporary 3-phase electricity shall be made available for installation of elevator
components.
2.
Comply with Section 01510 - Temporary Utilities.
C.
Temporary Use of Elevator:
1.
Owner shall petition manufacturer/installer for temporary use of elevator, if required.
2.
Temporary use of elevator shall be in accordance with terms and conditions of
14240-3
manufacturer/installer's temporary acceptance form.
1.10 SEQUENCING
A.
Ensure that products of this section are supplied to affected trades in time to prevent
interruption of construction progress.
1.11 WARRANTY
A.
Manufacturer/installer shall guarantee materials and workmanship of equipment installed
and correct defects not due to ordinary wear or to improper use, which may develop within 1
year after completion of installation or acceptance thereof by beneficial use, whichever is
earlier.
1.12 MAINTENANCE SERVICE
A.
Elevator maintenance service shall be performed by elevator manufacturer/installer.
B.
Elevators shall receive regular maintenance on each unit for period of ____ months after
completion of work specified herein or acceptance thereof by beneficial use, whichever is
earlier.
C.
Trained employees shall make periodic examinations and perform work including necessary
adjusting, greasing, oiling, and replacing parts to keep elevators in operation, except parts
that require replacement because of accidents, vandalism, misuse, or negligence by parties
other than manufacturer/installer.
D.
Manufacturer/installer shall perform all Work, except emergency minor adjustment call-back
service during regular working hours.
E.
Manufacturer/installer shall perform all Work, except emergency minor adjustment call-back
service on overtime.
F.
Manufacturer/installer shall provide emergency minor adjustment call-back service during
regular working hours.
G.
Manufacturer/installer shall provide emergency minor adjustment call-back service on
overtime.
H.
If Owner request that examinations, cleaning, lubrication, adjustments, repairs,
replacements, or emergency minor adjustment call-back service, unless specified herein, be
performed on other than manufacturer/installer's regular working hours of regular working
days, manufacturer/installer shall absorb straight-time labor charges and Owner will
compensate manufacturer/installer for overtime premium, travel time, and expense at normal
billing rates.
I.
Elevator Control System:
1.
Include built-in remote diagnostic module to relay constant status of elevators and
control system to a 24-hour, 7-days-a-week central-monitoring facility.
2.
Remote Monitoring Device: Transmit information on current status of elevators,
including malfunctions, system errors, and shutdown.
PART 2 PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: Schindler Elevator Corporation, which is located at: 20 Whippany
Rd.; Morristown, NJ 07960; Tel: 973-397-6500 ; Fax: 973-397-3710; Email:request info
14240-4
(uswebmaster@us.schindler.com); Web:www.us.schindler.com
2.2
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section
01600.
TELESCOPIC HOLELESS HYDRAULIC ELEVATORS, FRONT MOUNTED JACK
A.
Hydraulic Passenger Elevators: Schindler Model 330A as manufactured by Schindler
Elevator Corporation.
B.
Telescopic Holeless Jack System:
1.
Jack Cylinder: Mount to car structure.
2.
Synchronization of Jack Stages: Direct mechanical means to ensure elevator moves
at steady speed and provides smooth ride.
C.
Elevator Equipment Summary:
1.
Application: Telescopic Holeless Front Mounted Jack.
2.
Service: General Purpose Passenger - Class A Loading.
3.
Quantity of Units: As indicated on Drawings.
4.
Quantity of Units: 1.
5.
Quantity of Units: 2.
6.
Quantity of Units: 3.
7.
Quantity of Units: 4.
8.
Capacity, Clear Inside Dimensions: 2100 lbs (952 kg), 5 feet 8 inches (1727 mm) W x
4 feet 3 inches (1295 mm) D.
9.
Capacity, Clear Inside Dimensions: 2500 lbs (1134 kg), 6 feet 8 inches (2032 mm) W
x 4 feet 3 inches (1295 mm) D.
10.
Speed: 100 fpm (0.5 mps).
11.
Speed: 125 fpm (0.6 mps).
12.
Speed: 150 fpm (0.8 mps).
13.
Travel: Within manufacturer's normal range, maximum 41 feet 0 inches (12.5 m),
minimum 8 feet 7 inches (2.67 m).
14.
Landings: As indicated on Drawings.
15.
Landings: ________________
16.
Front Openings: As indicated on Drawings.
17.
Front Openings: ____________________.
18.
Operation: Microprocessor Single Car Automatic Operation with Onboard Diagnostic
Capabilities.
19.
Operation: Microprocessor Duplex Car Automatic Operation with Onboard Diagnostic
Capabilities.
20.
Operation: Microprocessor Multi Car Automatic Operation with Onboard Diagnostic
Capabilities.
21.
Machine Room: As indicated on Drawings.
22.
Machine Room: Adjacent to elevator hoistway.
23.
Machine Room: Remote from elevator hoistway.
24.
Entrance Type and Width: Single Speed Side Opening Doors, 3 feet (914 mm).
25.
Entrance Type and Width: Single Speed Side Opening Doors, 3 feet 6 inches (1067
mm)
26.
Entrance Height: 7 feet (2134 mm).
27.
Cab Height: 8 feet 0 inch (2439 mm).
28.
Guide Rails: Equivalent to 16 lb per foot.
29.
Power Supply: 208 Volts 3 Phase 60 Hz.
30.
Power Supply: 240 Volts 3 Phase 60 Hz.
31.
Power Supply: 460 Volts 3 Phase 60 Hz.
32.
Power Supply: 480 Volts 3 Phase 60 Hz.
14240-5
33.
34.
35.
D.
2.3
Power Supply: 550 Volts 3 Phase 60 Hz.
Power Supply: 575 Volts 3 Phase 60 Hz.
Power Supply: 600 Volts 3 Phase 60 Hz.
Elevator Components:
1.
Anti-stall feature.
2.
Braille and audible signals.
3.
Button Access Code Security Feature (not available with keyed switch or card reader
provisions).
4.
Card reader Provisions (not available with keyed switch or Button Access Code)
5.
Door open and close stall protection.
6.
Emergency lighting.
7.
Emergency Power (not available with Rescue Feature)
8.
Firefighter's Service: Sensors as specified in Section ___________.
9.
Independent service feature.
10.
Infrared light curtain door protection.
11.
Keyed switch security in car operating panel or hall pushbutton fixture.
12.
Low oil return.
13.
Overload sensors.
14.
Phase protection.
15.
Soft Start Electronic Starting
16.
Elevator Management System Provisions.
17.
Locking Service Panel in Car Operating Panel.
18.
Pressure Switch.
19.
Remote Monitoring Capable.
20.
Rescue Feature Battery Lowering (not available with Emergency Power).
21.
Status Panel Indicator.
22.
Telephone (ADA compliant).
TELESCOPIC HOLELESS HYDRAULIC ELEVATORS, DUAL PISTON
A.
Hydraulic Passenger Elevators: Schindler Model 330A as manufactured by Schindler
Elevator Corporation.
B.
Telescopic Holeless Jack System:
1.
Jack Cylinder: Two jacks, one located at each side of the car and mounted to the
elevator car structure.
2.
Synchronization of Jack Stages: Direct mechanical means to ensure elevator moves
at steady speed and provides smooth ride.
C.
Elevator Equipment Summary:
1.
Application: Telescopic Holeless Dual Piston.
2.
Service: General Purpose Passenger - Class A Loading.
3.
Service: Hospital Service Passenger - Class A Loading.
4.
Quantity of Units: As indicated on Drawings.
5.
Quantity of Units: 1.
6.
Quantity of Units: 2.
7.
Quantity of Units: 3.
8.
Quantity of Units: 4.
9.
Capacity, Clear Inside Dimensions: 2100 lbs (952 kg), 5 feet 8 inches (1727 mm) W x
4 feet 3 inches (1295 mm) D.
10.
Capacity, Clear Inside Dimensions: 2500 lbs (1134 kg), 6 feet 8 inches (2032 mm) W
x 4 feet 3 inches (1295 mm) D.
11.
Capacity, Clear Inside Dimensions: 3000 lbs (1362 kg), 6 feet 8 inches (2032 mm) W
x 4 feet 9 inches (1448 mm) D.
12.
Capacity, Clear Inside Dimensions: 3500 lbs (1589 kg), 6 feet 8 inches (2032 mm) W
x 5 feet 5 inches (1651 mm) D.
14240-6
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
D.
Capacity, Clear Inside Dimensions: 4000 lbs (1816 kg), 7 feet 8 inches (2337 mm) W
x 5 feet 5 inches (1651 mm) D.
Capacity, Clear Inside Dimensions: 4000 lbs (1816 kg), 5 feet 8 inches (1727 mm) W
x 7 feet 3 1/2 inches (2222 mm) D
Capacity, Clear Inside Dimensions: 4500 lbs (2043 kg), 5 feet 8 inches (1727 mm) W
x 7 feet 9 1/2 inches (2375 mm) D.
Capacity, Clear Inside Dimensions: 5000 lbs (2268 kg), 5 feet 8 inches (1727 mm) W
x 8 feet 5 inches (2565 mm) D.
Speed: 100 fpm (0.5 mps).
Speed: 125 fpm (0.6 mps).
Speed: 150 fpm (0.8 mps).
Travel: ________________.
Landings: As indicated on Drawings.
Landings: ___________________.
Front Openings: As indicated on Drawings.
Front Openings: _________________.
Rear Openings: As indicated on Drawings.
Rear Openings: _______________.
Operation: Microprocessor Single Car Automatic Operation with Onboard Diagnostic
Capabilities.
Operation: Microprocessor Duplex Car Automatic Operation with Onboard Diagnostic
Capabilities.
Operation: Microprocessor Multi Car Automatic Operation with Onboard Diagnostic
Capabilities.
Machine Room: As indicated on Drawings.
Machine Room: Adjacent to elevator hoistway.
Machine Room: Remote from elevator hoistway.
Entrance Type and Width: Single Speed Side Opening Doors, 3 feet (914 mm).
Entrance Type and Width: Single Speed Side Opening Doors, 3 feet 6 inches (1067
mm).
Entrance Type and Width: Single Speed Center Opening Doors, 3 feet 6 inches (1067
mm).
Entrance Type and Width: Single Speed Center Opening Doors, 4 feet 0 inch (1219
mm).
Entrance Type and Width: Two Speed Side Opening Doors, 4 feet 0 inch (1219 mm).
Entrance Height: 7 feet (2134 mm).
Entrance Height: 8 feet (2439 mm).
Cab Height: 8 feet 0 inch (2439 mm).
Cab Height: 9 feet 0 inch (2743 mm).
Cab Height: 9 feet 6 inches (2896 mm).
Cab Height: 10 feet 0 inch (3048 mm).
Guide Rails: Equivalent to 16 lb. per foot.
Power Supply: 208 Volts 3 Phase 60 Hz.
Power Supply: 240 Volts 3 Phase 60 Hz.
Power Supply: 460 Volts 3 Phase 60 Hz.
Power Supply: 480 Volts 3 Phase 60 Hz.
Power Supply: 550 Volts 3 Phase 60 Hz.
Power Supply: 575 Volts 3 Phase 60 Hz.
Power Supply: 600 Volts 3 Phase 60 Hz.
Elevator Components:
1.
Anti-stall feature.
2.
Braille and audible signals.
3.
Button Access Code Security Feature (not available with keyed switch or card reader
provisions).
4.
Card reader Provisions (not available with keyed switch or Button Access Code).
14240-7
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
2.4
2.5
Door open and close stall protection.
Emergency lighting.
Firefighter's Service: Sensors as specified in Section ____________.
Independent service feature.
Infrared light curtain door protection.
Keyed switch security in car operating panel and/or hall pushbutton fixture.
Low oil return.
Overload sensors.
Phase protection.
Soft Start Electronic Starting.
Elevator Management System Provisions.
Emergency Power.
Locking Service Panel in Car Operating Panel.
Pressure Switch.
Remote Monitoring Capable.
Rescue Feature Battery Lowering.
Status Panel Indicator.
Telephone (ADA compliant).
ELEVATOR MATERlALS
A.
Finish:
1.
Stainless Steel and Bronze: #4 satin or #8 mirror finish.
2.
Baked Enamel Colors: Manufacturer/installer's standard color selections.
3.
Exposed Aluminum Frames in Suspended Ceilings: Anodized.
B.
Plastic Laminates:
1.
Type: General purpose.
2.
Flame Spread Ratings: As required by code.
3.
Pattern: Select from elevator manufacturer/installer's standard selection.
C.
UL or CSA Approved: Motors, pumps, valves, fluid tank, hydraulic fluid, microprocessor
controller, controls, pushbuttons, and wiring.
D.
Spring Buffers, Attachment Brackets, and Anchors: Design and size according to building
code with safety factors.
E.
Pump: Positive displacement screw type, design for steady discharge with minimal
pulsations.
F.
Muffler: Reduce noise transmission.
ELEVATOR CABS
A.
Height:
1.
Height: 8 feet 0 inch (2438 mm) from finished floor to underside of canopy.
2.
Height: 9 feet 0 inch (2742 mm) from finished floor to underside of canopy.
3.
Height: 9 feet 6 inch (2896 mm) from finished floor to underside of canopy.
4.
Height: 10 feet 0 inch (3048 mm) from finished floor to underside of canopy.
B.
Elevator Car Enclosure Wall Sections:
1.
Minimum 16-gauge (0.060 inch) steel panels, allowing maximum deflection of 1/4 inch
(6 mm).
2.
Cab Wall: Steel, powder coat finish.
3.
Cab Wall: Steel, #4 stainless steel finish.
4.
Cab Wall: Steel, with plastic laminate panels.
14240-8
C.
Base, Frieze, and Reveals:
1.
Steel, powder coat finish.
2.
Steel, #4 stainless steel finish.
3.
Steel, #4 bronze finish.
D.
Ceiling:
1.
Suspended with exposed frame with plastic lay-in panels, fluorescent lighting.
2.
Suspended with exposed frame with aluminum egg crate lay-in panels, fluorescent
lighting.
3.
Suspended with concealed frame with powder coat steel lay-in panels; compact
fluorescent down lights.
4.
Suspended with concealed frame with #4 stainless steel lay-in panels; compact
fluorescent down lights.
5.
Suspended with concealed frame with #4 bronze lay-in panels; compact fluorescent
down lights.
6.
Suspended with concealed frame with #8 stainless steel lay-in panels; compact
fluorescent down lights.
7.
Suspended with concealed frame with #8 bronze lay-in panels; compact fluorescent
down lights.
8.
Lighting: Six compact fluorescent down lights with trim rings and protective screens.
9.
Lighting: Nine compact fluorescent down lights with trim rings and protective screens.
10.
Steel canopy finished in White Powder Coat, fluorescent lighting.
E.
Cab Returns: Integral construction.
1.
Finish: #4 stainless steel.
2.
Finish: #4 bronze.
F.
Transoms:
1.
Run full width of cab.
2.
Finish: #4 stainless steel.
3.
Finish: #4 bronze.
G.
Cab Doors:
1.
Flush design both sides.
2.
Rib construction.
3.
Finish: #4 stainless steel.
4.
Finish: #4 bronze.
H.
Infrared Light Curtain Door Protection:
1.
Equip leading edges of car doors with concealed transmitter and receiver infrared
beam devices to detect presence of object in process of passing through hoistway
entrance and car doorway.
2.
Use multi-beam scanning without moving parts to detect obstructions in door opening.
3.
Detector Device: Prevent doors from closing, or if they have already started closing,
cause doors to reopen and remain open while object is within detection zone.
4.
Horizontal Beams: Minimum of 40 horizontal beams to fill doorway from ground level
to a height of 6 feet (1829 mm).
I.
Exhaust Fan:
1.
Single speed.
2.
Two speed.
3.
Mount in cab transom or canopy.
J.
Handrail:
1.
1/2 inch x 2 inches (13 mm x 51 mm) flat in brushed aluminum.
2.
1/2 inch x 2 inches (13 mm x 51 mm) flat in #4 stainless steel.
3.
1/2 inch x 2 inches (13 mm x 51 mm) flat in #4 bronze.
14240-9
4.
5.
6.
7.
8.
2.6
2.7
2.8
1-1/2 inches (38 mm) round in #4 stainless steel.
1-1/2 inches (38 mm) round in #4 bronze.
Mount on rear wall.
Mount on side walls.
Mount on side and rear walls.
K.
Threshold:
1.
Aluminum.
2.
Bronze.
3.
Nickel silver.
L.
Cab Finish Flooring: Furnished and installed under Division 9, not to exceed 3/4 inch (19
mm) finished depth.
M.
Furnish 1 set of quilted, soil resistant and fire-retardant pads with appropriate fasteners.
HOISTWAY ENTRANCES
A.
Hoistway Doors and Frames:
1.
UL rated with required fire rating.
2.
Doors: Rigid flush panel construction with sound-deadening material.
3.
Frames: Securely fasten at corners to form unit frame. Frames shall be bolted.
B.
Exposed Areas of Corridor Frames:
1.
Finish: powder coat steel.
2.
Finish: #4 stainless steel.
3.
Finish: #4 bronze.
C.
Doors:
1.
Finish: powder coat steel.
2.
Finish: #4 stainless steel.
3.
Finish: #4 bronze.
D.
Sills:
1.
Aluminum.
2.
Bronze.
3.
Nickel silver.
CAB FIXTURES
A.
Main Car Operating Panel:
1.
Mount in return.
2.
Comply with handicap requirements.
3.
Pushbuttons: Illuminate using long-lasting LED's included for each floor served.
4.
Emergency Buttons and Switches: Provide in accordance with code.
5.
Switches for car light and accessories.
B.
Cab Fixtures:
1.
Telephone (ADA compliant).
2.
Digital Car Position Indicator.
3.
Car Lantern(s).
4.
Restricted Access Keyed Switch in Car Operating Panel for floor(s) 2.
5.
Locking Service Panel in Car Operating Panel.
6.
Certificate Frame.
7.
Vandal Resistant.
HALL FIXTURES
14240-10
A.
Pushbuttons:
1.
Up button and down button at intermediate floors.
2.
Single button at each terminal floor.
3.
Height: Comply with handicap requirements.
4.
Illumination: Illuminate using long-lasting LED's.
B.
Restricted Access Keyed Switch: As required by local Code.
C.
Hall Fixture Finish:
1.
Black Lexan.
2.
#4 stainless steel.
3.
#4 bronze.
4.
Vandal Resistant.
D.
Fixture Cover Plates: Mount with tamper-resistant screws.
1.
Mount hall fixtures in entrance frames.
2.
Mount hall fixtures in wall.
PART 3 EXECUTION
3.1
3.2
3.3
EXAMINATION
A.
Examine hoistway, hoistway openings, pits, and machine rooms before starting elevator
installation.
B.
Verify hoistway, pit, machine room, and openings are of correct size, within tolerances, and
are ready for work of this section.
C.
Verify walls and sill supports are plumb, where openings occur.
D.
Verify hoistway is clear and plumb, with maximum variation of 1/2 inch (13 mm)' at any point.
E.
Verify minimum 2-hour fire-resistance rating of hatch walls.
F.
Notify Architect in writing of dimensional discrepancies or other conditions detrimental to
proper installation or performance of elevators.
G.
Do not proceed with elevator installation until unsatisfactory conditions have been corrected
in a manner acceptable to manufacturer/installer.
INSTALLATION
A.
Install elevators in accordance with manufacturer/installer's instructions and ANSI/ASME
A17.1.
B.
Set entrances in vertical alignment with car openings, and aligned with plumb hoistway lines.
FIELD QUALITY CONTROL
A.
3.4
Perform tests of elevator as required by ANSI/ASME A17.1 and governing codes.
ADJUSTING
A.
Adjust elevators for proper operation in accordance with manufacturer/installer's instructions.
B.
Adjust elevators for smooth acceleration and deceleration of car so not to cause passenger
discomfort.
C.
Adjust doors to prevent opening of doors at landing on corridor side, unless car is at rest at
14240-11
that landing, or is in leveling zone and stopping at that landing.
3.5
3.6
D.
Adjust automatic floor leveling feature at each floor to within 1/4 inch (6 mm) of landing.
E.
Repair minor damages to finish in accordance with manufacturer/installer's instructions and
as approved by Architect.
F.
Remove and replace damaged components that cannot be successfully repaired as
determined by Architect.
CLEANING
A.
Clean elevators promptly after installation in accordance with manufacturer/installer's
instructions.
B.
Do not use harsh cleaning materials or methods that could damage finish.
PROTECTION
A.
Protect installed elevators from damage during construction.
END OF SECTION
14240-12