Title: Bird Boxes
Level of work: Entry level 3
Participants will need to supply and wear their own steel toe cap boots
Participant name:
Marking scheme
Aspect of task
1.1 Identify the correct hand tools:
 Award 1 mark for each piece of equipment and material they are verbally asked to identify.
Tri-square
Screwdriver
Nail punch
Wood screw
Vice
Brass hook and eye
Pencil
Paint brush
Sand paper and block
Wood preservative
1.2 Wear the correct PPE:
 Award 1 mark each where the following PPE is worn: steel toe cap boots (compulsory), eye
protection, ear defenders, dust mask and gloves.
1.3 Alignment and butting of joints:
 Award 4 marks for the correct alignment and butting of joints.
 Award 3 marks for the partial alignment and butting of joints
Possible
Mark
marks awarded
Max 10
Max 5
Max 4
 Award 2 marks for the partial alignment of joints
 Award 1 mark for the partial butting of joints
 Award 0 marks for no alignment and butting of joints.
1.4 Preserving of wood material:
 Award 3 marks for the correct application of paint
 Award 2 marks for the application of paint (runs or streaks identified)
 Award 1 mark for the partial application of paint.
 Award 0 marks where no paint is applied.
1.5 Clean and dispose of waste:
 Award 2 marks for the cleaning of the bench and floor (around bench) and the disposing of
waste in the bin
 Award 1 mark for the cleaning of the bench and the disposing of waste in the bin.
 Award 0 marks for no cleaning and disposing of waste in the bin.
1.6 Overall finish:
 Award 3 marks if finished to an outstanding standard.
 Award 2 marks if finished to a good standard.
 Award 1 mark if finished to a satisfactory standard.
 Award 0 marks if finished to a poor standard.
Max 3
Max 3
Max 3
Total
Max
28
Feedback of performance, areas for improvement.
Judge
___/28