Metrología Sariki S.A.
K-series optical CMM
Fully portable or mobile system offer easy setup and ergonomic operation.
The optical measuring CMMs are available in a portable and a mobile configuration.
As such they are the ideal tool for on-site measurement and troubleshooting task for
applications requiring a large measuring volume.
Systems can be also integrated in existing metrology rooms by fixing the camera to
the ceiling, wall or space frame.
Ready for scanning and probing.
The K-Scan MMDx is a walk-around scanning solution combining the digital
ModelMaker MMDx laser scanner with the portable K-series optical CMM. K-Scan is
ideally suited for on-site 3D digitizing tasks requiring minimum setup and fast
results. Operating the scanner with a laser stripe width up to 200mm is easy and
efficient. The 6m working range of the optical CMM is more than sufficient to take
measurements in and around a full vehicle. The dense point clouds that are acquired
can be graphically analyzed in Focus software, or in 3rd party packages.
The ergonomic Space Probe is used for traditional touch trigger or analog scanning
measurements. Automatic tip detection supports a variety of ball and point probes and
extensions.






Robust, lightweight design
Ergonomic position of trigger buttons to control measurements
Sound and LED measurement feedback
Wireless kit available
Multiple probe tip extensions for cavity measurement
Analysis in CMM-Manager or 3rd party tactile measurement software
Measurement object motion compensation through dynamic object referencing.
The initial alignment of a work piece is monitored by 3 LEDs mounted directly on the
part. The camera-to-part position is constantly monitored and updated, avoiding the
need for leap-frogging. As such it is possible to measure objects on vibrating work
floor or parts that move.
Optical measurements technology.
K-Series cameras measure the position of infrared LEDs by means of linear CCD
cameras. Through triangulation, the 3D position of each LED is calculated. 9 LEDs are
built into the handheld Space Probe, an ergonomically device that enables an
inspector to measure the actual 3D data of an inspection part in single point or
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
scanning mode. The optical measuring CMMs are available in a portable and a mobile
configuration.
Large (17m3) and expandable measurement volume.
When large objects such as a bus or construction vehicle need to be measured it is
possible to expand the measurement volume with the walk around reference. This
dedicated option enables the customer to locate the K-600 Optical Camera 360º round
the vehicle without the need for re-alignment. As such the whole vehicle can be
measured with one single camera saving tremendous system costs of extra material.
Because the system requires only one initial alignment, there is also an important
saving of labour time.
Robotized metrology enables inline inspection and absolute Accurate Robots.
Robot metrology accelerates repetitive inspection and assembly tasks. With K-Series
Optical CMM, Nikon Metrology ensures that robots operate accurately and reliably all
the time. Customers use the metrology system to calibrate robots up-front, or monitor
one or more robots in real time to optimize robot precision. In any case precision is
guaranteed, delivering predictable results all the way through.



Absolute robot accuracy through calibration or continuous robot tracking
Improved accuracy for repetitive inspection and assembly tasks
Better economics by combining metrology with industrial robots
Metrology in motion.
Validating simulation models using physical prototypes and pre-series parts is a critical
activity in automotive, aerospace, naval and civil engineering. K-Series DMM
(Dynamic Motion Measurement) combines high-speed optical sensors and modular
software applications to respond to these challenging motion analysis tasks. K-Series
DMM eliminates cumbersome setup work because the sensors can be mounted and
calibrated in minutes, instead of hours. The use of infrared LED markers allows for
more accurate measurement of high-frequency macro motions by adding only a few
grams of instrumentation mass to the test piece.







One system for static and dynamic measurements
Measure up to 1000Hz
Standalone operation with motion analysis package
Sensor operation with digital data stream to client application
Unique capability to measure multiple 3D targets (X, Y, Z)
3D animation enables to replay recorded motions in detail
Scripting enables automation of measurements and processing
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
Specifications:
Measurement
Single Point
Volumetric
Temperature
Volume
Accuracy*
Accuracy*
Range
K500:
11 m³
Up to 60 µm
Up to 90 µm
15-40°C
K600:
17 m³
Up to 60 µm
Up to 90 µm
15-40°C
K610:
17 m³
Up to 37 µm
Up to 60 µm
15-40°C
www.sariki.es
ELGOIBAR
BARCELONA
MADRID
VIGO
PORTUGAL
Metrología Sariki S.A.
Página 3 de 4
Metrologia Sariki |Bº san Antolin, 9 – 20870 ELGOIBAR | Web.: www.sariki.es