(Associate of State Bank of India)
PRICE BID
(TO BE READ IN CONTINUTY WITH INSTRUCTIONS OF PREQUALFICATION BID
DOCUMENTS AS ISSUED EARLIER)
FOR
PERIODICAL MAINTENANCE/
RENOVATION OF BANK OWN FLATS AT
THANE, MUMBAI, MAHARASHTA
Last date for submission of Sealed Tender:
at 2.00 PM on 05.06.2015
Opening of Sealed Tenders;
at 4.00pm on 05.06.2015
Tender to be submitted to:
THE DY.GENERAL MANAGER, (P&ES)
STATE BANK OF HYDERABAD,
PREMISES DEPARTMENT, H.O.,
2nd FLOOR, METHODIST COMPLEX,
ABIDS, HYDERABAD-500001.
Tel : 040- 23387- 297/290/371
Contractor has to must provide below their:
E- MAIL id :
Contact No:
Postal address :
____________________________________________________________________________
____________________________________________
(IN CASE THERE ARE NO CONDITIONS/CLARIFICATIONS IN TECHNICAL BID
PRICE BIDS WILL BE OPENED
BOQ FOR PERIOIDICAL MAINTEANCE/ RENOVATION WORKS (CIVIL,
ELETRICAL SANITARY AND PLUMBING WORKS) OF BANK’S OWN
FLATS AT THANE, MUMBAI, MAHARASHTRA.
Sl.
No.
(1)
1
2
3
4
PARTICULARS
(2)
QUANTITY UNIT
(3)
(4)
POLISHING OF EXISTING MARBLE
FLOORING/ SKIRTING
Polishing to the existing marble flooring and
Skirting to TIN OXIDE finish including cost of
all materials and all labour charges
etc.
complete at all heights.
9450.00
Sft.
FLUSH DOOR SHUTTERS
Removing of the existing
shutters and
Providing and fixing 30mm thick solid core
Water Proof flush door in single leaf (T.W
beading of 12mm thick to be provided all
around) of approved make as per ISI
specifications and size as per approved
drawings and finished on both sides with 1mm
Thick laminate of approved brand, make and
design, and colour, with S.S. fixtures and
fittings as directed, edge of the shutter to be
polished in reqd. coats of 2 rench polish,
including all leads and lift, at all levels complete
for finished item of work at all heights.
1,176.00
Sft.
TEAK WOOD MAIN ENTRANCE DOOR;
Removing of the existing worn-out MAIN
ENTRANCE TW Doors and supply & fixing of
Fully Panelled Teak wood door as per the
instructions of Engineer-in-charge with all
Heavy Duty Brass/ SS fixtures of approved
make and quality with Necessary polishing to
melamine finish at all heights. The door has to
be provide with peep hole and a levers Godrej
lock. The rates quoted shall include removing
of the existing worn out shutters and disposing
the same away from site.
294.00
Sft.
TOILET DOORS
Removing of the existing worn-out Flush
shutters and supply & fixing of PVC Doors with
Frame of approved make & quality wit
necessary fixtures in 19mm Black Granite
frame work of 6” width with the edges duly half
rounded to mirror finish. The rates quoted shall
include removing of the existing worn out
shutters and disposing the same away from
site.
490.00
Sft.
RATE
AMOUNT
(5)
(6)
(1)
(2)
5
WARD ROBES IN BED ROOMS
Manufacturing, supplying & fixing of
Ward
robes above chajjas in Bed rooms made out of
19mmwaterprrof plywood of Green Ply or
equivalent make in 19mm Plywood frame work
The edges of the frame work and shutters are
to be provided with teak wood leaping duly
polished to melamine finish.. The
external
portion of the ward robes is to be topped with
1mm laminate of approved quality & shade and
inner surfaces should be topped with .75m white
laminate with necessary SS. Hardware such as
hinges, magnetic catchers, locks, tower bolts,
Handles, locks etc. complete.
6
MODULAR KITCHEN
Providing and fixing of Modular Kitchen in
aluminium frame work, wire baskets of top
quality 304 grade stainless steel with Nickel
Chromium Plating, of approved brand, 19mm
thick marine ply shutters with 1mm laminate on
both sides, with lapping on all sides coated with
P.U coating of matching colour, with high
precision Ebco make Double extension ball
slides, Hinges, and Aluminium Profile handles,
with 12mm thick bison board top under granite,
complete as per drawing, Specifications, site
conditions and as directed.
7
KITCHEN PLAT FOR WITH SS SINK
Providing and fixing in Position stainless steel
sink of size 24’’x18’’x10’’of(Franke/Nirali ) make,
with fixing in position as per drawing, under the
granite platform, including cutting, moulding and
polishing of granite, fixing of sink as per
manufacturers instruction, including sealing the
areas and joints on the side of the sink with
silicon sealent, complete as per the direction and
approval of the Engineer-in-charge at all heights
8
ALUMINIUM SLIDING WINOWS
Supply and fixing of aluminum glazed sliding
windows 3 track with aluminum anodized
sections of 98.5x38.1x1.5 mm and panel filling
with 5mm thick saint goblin plain glass including
rubber beeding, Netlone mosquito mesh,
standard accessories like rollers, handles etc.,
for sliding windows including cost of supply and
fixing of aluminium grill with F channel fixing to
window frame etc., complete and as directed by
Engineer-in-charge
Windows
French Windows
a
b
(3)
675.00
785.00
(4)
(5)
(6)
(1)
(2)
8a FIXED VENTILATORS
AS AS ABOVE BUT WITH FIXED FARME
WITH LOUVERS FOR VENTILATORS
9 SHELVES IN KITCHEN
Manufacturing, supplying & fixing of Box type Cup
Boards in Kitchen made out of 19mmwaterprrof
plywood of Green Ply or equivalent make in 19mm
Plywood frame work The edges of the frame work
and shutters are to be provided with teak wood
leaping duly polished to melamine finish.. The
external portion of the ward robes is to be topped
with 1mm laminate of approved quality & shade
and inner surfaces should be topped with .75m
white laminate with necessary SS. hardware such
as hinges, magnetic catchers, locks, tower bolts,
Handles, locks etc. complete.
(3)
(4)
110.00
Sft
595.00
Sft.
10 WATER PROOFING IN THE TOILETS
Providing water proofing treatement to Bath and
WC sunk by applying first coat of polymer
modified semi viscous paste prepared by
applying grouting with cement slurry admixed
with non shrink grout additives as per
manufacturers specifications, mixing polymer of
approved make(such as Master Seal 550/
Brushbond/ Perma Shield) and cement in 1:2
proportion to a neatly cleaned and dust free
concrete surface prepared by removing loose
and deposited material with brush and water,
laying glass fibre mesh of 10 x 10 and of
approved make, over tacky surface of first coat in
transverse direction, sprinkling coarse sand over
it followed by protective mechanical cover of 15
to 20mm thick polymer modified plaster to coated
surface of sunk @ 2 litre per bag of cement and
filling joints with non shrink compound and
covering
10
Years
guarantee
against
leakproofness on court fee stamp paper of Rs
100/-, complete for finished item of work at all
floors, at any level..
1,680.00
Sft.
11 BRICK BAT COBA WATERPROFING
Providing cement based water proofing
treatment in W.C and Bath with Brick Bat Coba
in all position consisting of specialized approved
waterproofing compound and materials as per
manufacturers specifications and finally top
finishing with average 20mm thick layers of
mortar with fibre in C.M 1 :3, including finishing
the surface smooth to receive the flooring of Bath
and WC,and covering 10 years Guarantee on
court fee stamp paper of Rs 100/- including all
lead. lift and ponding test etc complete.
1,260.00
Cft.
(5)
(6)
(1)
(2)
(3)
(4)
12 CERAMIC FLOORING
Dismantling the existing flooring &Providing and
laying Flooring in Ceramic Tiles of first quality of
approved make, design colour and print, laid to
perfect level or slope as directed over bed
mortar in CM 1:4, 20mm thick, on C.C. bed
already laid, in required position, including neat
cement slurry of honey like consistency spread
at the rate of 3.3 Kgs of cement per Sq.m jointed
with neat cement to full depth, filling of joints with
approved joint filler to match shade of the tiles.
including curing and lift charges, complete for
finished item of work at all heights ( Average
Basic rate of tiles to be taken as Rs 70.00 / Sft).
896.00
Sft
13 GLAZED TILES DADOOING
Dismantling of the existing Glazed tile dadooing
and Providing Dadooing to walls with Gazed
Tiles Of first quality of approved make, design
and colour incl. borders and pencils as directed,
with tile adhesive of approved manufacturer,
filling of joints with approved joint filler to match
shade of the tiles. including curing and lift
charges, complete for finished item of work at all
heights.(Average Basic rate of tiles to be taken
as Rs 60.00 / Sft).The rate quoted shall be
inclusive of plastering to walls in C.M. 1:6 in line
and level.
5,355.00
Sft.
14 PATCH PLASTERING
Removing of the existing loose plastering and
Providing and Applying Cement Plaster
minimum 15mm thick in CM (1:4) for surface of
brick masonry walls in single coat including cost
and conveyance of all materials like cement,
sand, water etc., to site including all operational
incidental charges, finishing, scaffolding, lift
charges, curing, including cutting grooves
wherever necessary etc., for finished item of
work at all heights .
4,900.00
Sft.
37,850.00
Sft.
15 PLASTIC EMULSION PAINTING WITH PUTTY
Providing and applying Plastic Emulsion Paint of
approved make, quality colour and shade, to old and
new surfaces in two or more coats, over two coats of
cement based putty, and primer, preparation of
surface, upto the satisfaction of Bank, including
scaffolding, lift charges, etc., complete for finished
item of works for all floors at any level.
Note: The rate shall also include filling up of cracks,
with approved joint filler of approved brand and as
per specifications and as directed.
(5)
(6)
(1)
(2)
(3)
(4)
Rate
Only
1,680.00
840.00
Rtae
Only
840.00
Rate
Only
Rft.
17 Providing and fixing UPVC SOIL /VENT/ WASTE
SWR pipe of required diameter conforming to
I.S.-13592,
and
I.S.-4985
to
withstand
continuous internal hydroulic pressure of
4kg/cm2 including necessary fixtures and fittings,
such as bends, tees single junctions, double
junctions and joining with rubber rings and
lubricants, on walls by means of clips or in
ground including necessary excavation, laying
refilling, trench testing etc. complete
a 100mm dia
b 75mm dia.
225.00
280.300
Rft.
Rft.
18 INDIAN WC
Providing and fixing, Orissa Pan white glazed
W.C 1st quality ISI marked 600 x 400mm size
of Hindware/Parryware /Neycer-ISI Mark, with
“P” or “s” trap UPVC soil and vent pipe upto the
outside face of the wall, 1:5:10 cement concrete
bedding,10 litre upvc low level flushing cistern,
32mm dia, UPVC flush pipe with fittings and
clamps, complete.
14.00
Nos.
16 Providing and fixing in position ultra voilet
stabilised UPVC plumbing pipe of standard
make, brand, and quality, of specified diameter &
standard thickness conforming to I.S 4985,
including necessary fittings conforming to I.S.
7834, such as pvc bends, tees, reducers,
clamps, etc including necessary excavation
trench filling, necessary drilling holes in walls,
slabs, etc and making good the surface
complete.
a 15mm dia.
b
c
d
20mm dia
25mm dia
32mm dia.
e
f
40mm dia
50mm dia
Rft.
Rft.
Rft
Rft.
Rft.
(5)
(6)
(1)
19
20
21
22
(2)
(3)
(4)
EUROPEON WC
Providing and Fixing Wall Hung, European
type white glazed earthenware W.C.Pan of
approved make, with Soft Closing UPVC seat
and lid, with UPVC Pipe and vent pipe upto the
outside face of wall, 'P' or 'S' trap, with 10 Litre
UPVC high level flushing Cistern, 32mm dia,
UPVC flush pipe with fittings and clamps,
20mm dia UPVC overflow pipe, with mosquito
proof couplings, cutting and making good to the
walls and floors, testing etc. complete,for
finished item of work in all respects.
14.00
Nos.
WASH BASINS
Providing and fixing white glazed earthenware
Wash Hand Basin of 550mmx400mm size,
(Cera/Parryware/Neycer) 1st quality conforming
to IS:2556-Part-4:1972 with waste fittings like
rubber plug chain, CP angle cock, CP waiste
Coupling, and fitted with 15 mm nominal bore
Chromium Plated Pillar Tap, (All C.P fittings of
Jaguar (Florentine) Make)
complete with
standard Rack bolt Screw of Viking or
equivalent make, including testing etc. complete
,for finished item of work in all respect.
28.00
Nos.
MS PROTECTIVE GRILLS TO WINDOWS &
BALCONIES
Providing and Fixing Mild Steel Grill work for
windows, ventilators with 10/12mm m.s square
bars, m.s flats, etc as per approved design/
drawings, with MS hold fasts for the frame for
fixing into side walls, welding, smooth grinding
of joints, including fixing in desired place and
position with all necessary fixtures, scafflodings,
finishing, and painting with one coat of anti
corrosive paint of approved make, complete for
finished item of work at all floors, at any level.
2,310.00
Sft.
PVC NAHANI TRAPS
Providing and fiixng 100mm Rigid PVC nahani
trap of approved make, including C.P jali, bend
connecting piece of P.V.C. pipe of required
diameter, pipe upto the outside face of the wall,
making good the holes and repairs, testing etc
complete.
56.00
Nos.
(5)
(6)
(1)
23
24
a
b
c
d
e
f
25
26
27
(2)
(3)
(4)
SHOWER ROSE
Providing and fixing 100mm dia, Chromium
plated Brass Shower rose swivel type with
shower arm of (Jaquar make or as directed by
Bank), to supply pipe including bend, socket,
heavy quality extension nipple, testing etc
complete.
CP FITTINGS
Providing and fixing C.P fittings of Jaquar (
Flourentine ) or as per approval by bank with
cp wall flange, cp heavy quality extension
nipples, etc complete.
Two way Bib Cock.
Health Faucet.
Long Body Bib Cocks.
Short Body Bib Cocks.
Towel Rings
Paper Holder
28.00
14.00
28.00
42.00
24.00
12.00
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
ENAMEL PAINTING
Providing and applying two coats of Synthetic
Enamel paint of first grade of approved make,
shade and colour in two or more coats to M.S
Grill , Railing and wood work over one coat
primer, preparation of surface to give smooth
finish,
with cost and conveyance of all
materials incl. sandpaper, brushes, scaffolding
etc. to site and all taxes, all labour charges,
etc., complete for finished item of work.
3,500.00
Sft.
EXTERNAL PAINTING
Providing and Painting with Apex or equivalent
approved make, colour and shade to exterior
faces of walls over existing texturised coat /
plastered surfaces in two coats over primary
coat of white cement (total 3 coats) including all
taxes, cost and conveyance of all materials,
water, brushes, scaffolding incl. complete for
finished item of work in all floors.
17,500.00
Sft.
4.5”th. BRICK WORK
Providing and laying 115mm thick brick
masonry in CM (1:4) including mild steel
longitudinal reinforcement of 2 bars of 6mm
diameter placed at every fourth course, properly
bent and bounded at ends including chiselling
of existing wall / plaster for proper bonding,
scaffolding, racking out joints,, lift charges,
curing, etc., complete for finished item of work.
1,680.00
Sft.
(5)
(6)
(1)
28
II
1
2
3
4
(2)
MIRRORS
Providing and fixing in position bevelled edge
mirror of 8mm thick of approved quality
mounted on 8mm marine ply fixed in position
with CP brass cap mirror screws, washers etc.
to walls with necessary teakwood, plugs, etc.,
complete as directed for Mirror size 600 x 800.
Sub-total-I
ELECTRICAL INSTALLATION WORKS
Supply, Installation, Testing & Commissioning
of
Distribution
Boards
recessed
in
walls/partitions, complete with MCBs/Isolators/
Bus bars and interconnections. No fabricated
DBs shall be allowed. Only DBs of specified
makes as per list of materials shall be used
(DOUBLE DOOR IP43 Type)
4 WAY TPN DB, Incomer 40A TPN ELCB,
100MA - 1 No,, Outgoing 10 A/20A SP MCBs 12 Nos.
(3)
(4)
28.00
Nos.
14.00
Nos.
Point wiring through PVC conduits 25mm/
20mm as IS 9537 part III with 2 Nos. of 2.5
sq.mm & 1 no. of 1.5 sq. mm (for earth) PVC
insulated Copper Conductors with modular
switches complete with all accessories as
detailed in specification. The switch boxes shall
be flush mounted with partition works or as
directed by the architects & shall done coordination with interior furniture works. All wiring
shall be concealed. The rate shall include circuit
wiring from DB to switch & switch board to
switch board, ceiling rose and angle holders for
cfl light fixtures all complete.
For light points/Fan/ foot lamp points
392.00
Nos.
Inverter wiring for light and fan points at Hall,
Bed rooms, Kitchen and one socket at hall.
Rate includes wiring 3X 2.5Sqmm (Phase,
neutral and Earth) from DB to inverter through
6A/16A switch sum Socket, inverter to 6A/16A
switch cum socket then switch boxes etc.
separate switch control for inverter wiring all
necessary accessories ( Hall- 2, Bed room-4,
Kitchen-1 and Hall socket-1 no)
14.00
Nos.
Supply, installation, testing & fixing of sheet
steel enclosure (industrial socket) fitted with
plug & socket of IP30 degree of protection with
20A SPN MCB including wiring with 2 runs of
4.0 sqmm and 1 run of 2.5 sqmm in 25mm dia
2mm thick PVC pipe (ISI MARK) and all
accessories complete etc., for split AC point.
Note: No looping.
28.00
Nos.
(5)
(6)
(1)
5
6
7
8
9
10
11
12
13
(2)
(3)
(4)
Supply & fixing of 6A/16A Power switch socket
modular type including wiring with 2 runs of 4.0
sqmm and 1 run of 2.5sqmm in 25mm dia 2mm
thick PVC pipe (ISI MARK) and all accessories
complete with G.I. switch mounting box.
Refrigerator, micro oven, mixi etc
42.00
Nos.
Supply & fixing of 6A/16A Power socket in the
toilet and 16A switch at the entrance of toilet of
modular type including wiring with 2 runs of 4.0
sqmm and 1 run of 2.5 sqmm in 25mm dia 2mm
thick PVC pipe (ISI MARK) and all accessories
complete with G.I. switch mounting box. For
geyser
28.00
Nos.
S & I of point wiring for Raw power plug points
3X2.5Sqmm copper conductor PVC wires
pulled through recessed PVC conduits. Each
point consisting of 1no. of 6A , 3 pin sockets &
1 no. 6A switch wired together forming one
point( rate includes PVC conduits, wire, switch
boxes finishing the same) Maximum three
looping.
126.00 Nos.
Supply, laying of 2 pair telephone cable in PVC
conduits, telephone socket modular type
complete with chrome plated mounting box.
The box shall be fixed in partitions/concealed in
walls. The rate shall be inclusive telephone
cable, PVC conduit, sockets and all
accessories.
b) 1No. RJ11 telephone socket
28.00
Sets
Fixing, Testing & Commissioning of 9" exhaust
fans 1500 rpm, 230V Single phase. The rate
shall include connection with 3 core 1.5 sq.mm
flexible copper cable from ceiling to the exhaust
fan. Toilet, kitchen
42.00
Nos.
Fixing of T5LL28 Watts TUBE light fixtures with
all fittings, fixtures, accessories etc complete
84.00
Nos.
Fixing of 48"( 1200mm) sweep ceiling fan with
suitable down rods, step type electronic
regulator and necessary accessories
42.00
Nos.
Supply and providing TV points include cable
shall be laid in the conduit, GI box all complete.
28.00
Nos.
Supply and fixing of ding dong bell push
including wiring with 1.5sqmm PVC copper
wire, bell push and bell with all accessories
complete
14.00
Nos.
(5)
(6)
(1)
14
15
16
17
(2)
(3)
(4)
Providing independent earthling by excavating
a trench to a depth of 2.5 M in all soils, using
40mm dia 'B' class GI pipe of 2.5 Mtrs length
with necessary accessories ring duly providing
staggered holes including filling with equal
proportion of Salt and Charcoal in layers and all
labor charges etc., complete for body earthing.
1.00
No.
Supply and run of 4Runs of 6Sq.mm,2 Run of
2.5Sqmm FR P.V.C. insulated flexible copper
cable including 25mm dia 2mm thick PVC pipe
(ISI MARK) for Distribution boards incoming
including all labor charges etc., complete for
erection
350.00
Rmt
Supply and run of 2Runs of 4Sq.mm,1 Run of
2.5Sqmm FR P.V.C. insulated flexible copper
cable including 25mm dia 2mm thick PVC pipe
(ISI MARK) including all labor charges etc.,
complete for erection
70.00
Rmt.
1 Job
Job
Removing of old electrical wiring, switch boards
and accessories etc, including arranging
temporary power supply while carrying the
works.
Sub-Total-II
Grand Total ( I+II)
Discount , if any
Net total after Discount
(5)
(6)
Rupees________________________________________________________________________ Only
SIGNATURE OF
THE CONTRACTORS
WITH SEAL