DETAILS OF PROJECTS/ DISSERTATIONS (GTU)
Semester: 4th M.E. (CAD / CAM) (SU)
Subject: OF PROJECTS/ DISSERTATIONS
Team/Group
Identification
No.
Enroll. No. of
Student
Year-2009
Student Name
Name of Internal
Faculty
Guide/Guides
Prof. R.M.Bhorniya
1
2009-01
2
2009-02
Devendra J.Marsonia
3
2009-03
Jayantigar l. ramdatti
4
2009-04
Patel Dharmendra J.
Kartik D.Kothari
Prof.S.B.Jadeja
Prof. P.H.Darji
Prof. P.H.Darji
Title of IDP/UDP /DISSERTATION
IDP/UDP
Dynamic simulation and optimisation for
dynamically loaded crankshaft of a single
cylinder I.C.Engine.
IDP
Stress Analysis and design of process piping by
caeser-II
UDP
Parametric study of grinding machine using
Taguchi approach.
UDP
Product life cycle
manufacturing system
UDP
and
reconfigurable
Prof. R.M.Bhorniya
Prof. V.P.Darji
5
2009-05
Mitul A.Patel
Prof. K.R.Gawande
Productivity Improvement and cost reduction
using cellular Manufacturing and continuous
improvement :As A Lean Manufacturing tools
IDP
DETAILS OF PROJECTS/ DISSERTATIONS (GTU)
Semester: 4th M.E. (CAD / CAM)
Subject: OF PROJECTS/ DISSERTATIONS
Year-2010
Team/Group
Identification
No.
Enroll. No. of
Student
Student Name
1
2010-01
Dipesh D Kundaliya
Name of Internal
Faculty
Guide/Guides
Prof. P.H.Darji
Prof. V.K.Jani
2
3
2010-02
2010-03
Satyen B Rajvir
Rahul L Patel
Prof. K.R.Gawande
Prof. D.D.Patel
Prof. K.R.Gawande
Prof. K.K.Dave
Prof. V.P.Darji
4
2010-04
5
2010-05
Santosh K Sitapara
Shri. K.K.Dave
Morabiya Divyesh
Prof. P.H.Darji
Prof. D.D.Patel
Title of IDP/UDP /DISSERTATION
IDP/UDP
Design & Analysis of Pressure Vessel – A case
study
UDP
D.O.E Application to reduce non-conformance
of connecting road A case study
UDP
Design and optimization of Chassis of TATA –
2516TC
IDP
Design and Analysis of Equipment of Asphalt
mixing plant
IDP
Design and Development of Angular contact
Ball bearing using Numerical & FE Analysis –
A case study
IDP
DETAILS OF PROJECTS/ DISSERTATIONS (GTU)
Semester: 4th M.E. (CAD / CAM)
Subject: OF PROJECTS/ DISSERTATIONS
Team/Group
Identification
No.
Enroll. No. of
Student
1
090440708002
Year-2011
Student Name
Raupani Hayati Vrajlal
Name of Internal
Faculty
Guide/Guides
Prof. P.H.Darji
2
090440708003
Virani Hitesh Dahyabhai
Prof. K.R.Gawande
3
090440708004
Jani Rita Kishorkumar
Shri. K.K.Dave
4
090440708005
Bhuva Chiragbhai L
Shri. K.K.Dave
5
090440708006
Rathour Anilkumar N
Prof. P.H.Darji
6
090440708007
Dave Jignesh Trambaklal
Prof. K.R.Gawande
7
090440708009
Padaliya Sandip
Bhanjibhai
Prof. K.R.Gawande
Title of IDP/UDP /DISSERTATION
Product Design improvement of Foldable Crate
for Material Handling in Automobile
Companies
Development of Software for Arranging a
Machine Cell for the Manufacturing of CNC
parts through GT- A case study
Improvement of Fatigue life of Spur Gear
through Analytical and Finite Element Analysis
Analysis of Lead Lithium Heat Exchanger for
International Thermonuclear Reactor (ITER)
Design , Development and Analysis of High
Speed Spindle
Reduction of Rejection rate in Sand Casting
Process by Applying Quality Improvement
Techniques
Design and Development of Belt Conveyor for
Job Advancing System
IDP/UDP
IDP
IDP
UDP
UDP
IDP
IDP
UDP
A Case Study on Design and Analysis of a Gas
Reader Casing Development through FDM
Rapid Prototype
Design and Development of Chip Removal
Mechanism for Machine Tool System
IDP
8
090440708010
Modi Rupal
Dineshchandra
Shri. K.K.Dave
9
090440708011
Gohil Amitkumar
Chandubhai
Prof. V.P.Darji
090440708012
Thakar Ishan Bhartbhai
Prof. V.P.Darji
Design Development and Analysis of CNC
Engraving Machine.
IDP
10
090440708013
Mehta Naitik Lalitkumar
Prof. V.P.Darji
3 – D modeling of Bowl of Multistage
Submersible Pump and Its CFD Analysis
through ANSYS
IDP
11
Prof P.H.Darji
Head of Mechanical Department
UDP
DETAILS OF PROJECTS/ DISSERTATIONS (GTU)
Semester: 4th M.E. (CAD / CAM)
Subject: OF PROJECTS/ DISSERTATIONS
Year-2012
Name of Internal
Faculty
Guide/Guides
Title of IDP/UDP /DISSERTATION
IDP/UDP
Team/Group
Identification No.
Enroll. No. of
Student
100440708001
Parmar Kishan B
Prof V K Jani
Turbulence Analysis Of I. C. Engine Through
Cfd Approach
UDP
1
100440708002
Kondhiya Pankit
Prof P H Darji
Design And FE Analysis of Needle Roller
Bearing Used In Gear Transmission.
IDP
2
Jadeja Jaypalsinh A
Mr R L Patel
Study Of Try-Slider Wear Behaviour And
Hypoeutectic And Eutectic Si Alloys.
UDP
3
100440708003
IDP
Prof K R Gawande
Analysis And Optimization Of Overall
Equipment Effectiveness In The Production
Shop Using Lean Manufacturing:Case Study
IDP
Prof K R Gawande
Improvement Of Tool Life Of CNC Milling
Machine By Design Of Experiments In Minitab
Software.
4
5
100440708004
100440708005
Student Name
Kad Nikunj L
Shah Ishan B
6
100440708006
Patel Hardik D
Prof P H Darji
Development Of 3d Cad Model And Fe
Analysis Of Local Shielding For 14 Mev
Neutron Generator
IDP
100440708008
Pathak Ankita B
Prof V K Jani
Implementation Of Productivity Improvement
Strategies Of Machine Shop By Using JIT
IDP
7
IDP
8
100440708009
Acharya Shailee G
Prof P H Darji
Design Improvement In Undercut Ejection
Mechanism Of Plastic Injection Mold Through
Analytical & Fe Analysis
100440708010
Vala Tushar
Mr. N. J. Patel
Horizontal Centrifugal Casting For Aluminium
Alloys.
UDP
9
Jakhaniya Ashvin G
Mr. N J PATEL
An Enhanced Diagnostic System For Bearing
Condition Monitoring
IDP
10
100440708011
IDP
Mr R L Patel
Analyse the effect of cutting parameters on
surface roughness of alloy 6061 tools in drilling
operation using DOE
IDP
Prof P H Darji
Fatigue Life Improvement Through Reduction
Edge Pressure Of Cylindrical Roller Bearing
Using Fe Analysis
Prof K R Gawande
Overall Efficiency Improvement & Rejection &
Reworks In Inside Diameter Grinding In Needle
Roller Bearings
11
12
13
100440708012
100440708014
100440708015
Sutariya Manoj T
Shah Maulik J
Patel Darshan D
Prof P.H.Darji
Head of Mechanical Department
IDP
DETAILS OF PROJECTS/ DISSERTATIONS (GTU)
Semester: 4th M.E. (CAD / CAM)
Subject: OF PROJECTS/ DISSERTATIONS
Team/Group
Identification
No.
1
2
3
4
5
6
Enroll. No. of
Student
110440708001
110440708002
110440708003
110440708004
110440708005
110440708007
Year-2013
Student Name
Shah Krunal A.
Pitroda Mirav H.
Jhala Gajendrasinh J.
Jhala Kalparajsinh R.
Zapadiya Rohankumar B.
Patel Nirav J.
Name of Internal
Faculty
Guide/Guides
Title of IDP/UDP /DISSERTATION
IDP/UDP
IDP
Prof.R.L.Patel
Reduction of Non-conformative rate of bearing
rings using six sigma methodology
IDP
Prof.P.H.Darji
Design & Development of integrated Direction
and Pressure control valve
Reducing manufacturing lead time of internal
gear AFP-50 fuel injection pump using MTTRF
IDP
IDP
Prof.A.N.Rathour
FE Analysis and optimization of VMC 640
Headstock
IDP
Prof.D.B.Morabiya
Elimination of waste of investment casting
using value stream mapping tools
Product life improvement of bracket used in
centrifugal pump for chemical industry through
mould flow analysis
IDP
Prof.K.R.Gawande
Prof.P.H.Darji
7
8
9
10
11
12
13
110440708009
Makwana Chintan B.
UDP
Prof.V.K.Jani
Design optimization of drive train of a robotics
arm.
Design and optimization of wiped film
evaporator by using CAE Tools-CFD
ANALYSIS
UDP
Design,development and analysis of logarithmic
profile of roller in roller bearing
UDP
A roadmap of sixsigma in process industries : A
Case Study
IDP
UDP
Prof.V.K.Jani
Study and development of mathematical model
of vibration control using shape memory alloysmart material system
Prof.P.H.Darji
Design of hollow helical compression spring &
it's life optimization through FE Analysis
UDP
Weight optimization of 70 T double girder of
overhead crane through FE Analysis
IDP
110440708011
Shrimali Yagneshkumar R.
Prof.R.L.Patel
110440708012
Vanapara Jagadishkumar B
Prof.P.H.Darji
110440708013
110440708014
110440708016
100440708007
Raval Hiren Bhupatray
Prof.K.R.Gawande
Trivedi Marsh Lalshankar
Koradiya Pankaj L.
Patel Apeksha K.
Prof.V.K.Jani
Prof P.H.Darji
Head of Mechanical Department
DETAILS OF PROJECTS/ DISSERTATIONS (GTU)
Semester: 4th M.E. (CAD / CAM)
Subject: OF PROJECTS/ DISSERTATIONS
Team/Group
Identification
No.
Enroll. No. of
Student
1
2
3
4
Year-2014
Student Name
120440708002
Gholetar Dharmendra
Abhesangbhai
120440708003
Sheth Siddharth
Narendrakumar
120440708004
120440708007
Jadav Yuvraj Jashubha
Langaliya Priyank Rajnibhai
Name of Internal
Faculty
Guide/Guides
Title of IDP/UDP /DISSERTATION
IDP/UDP
UDP
Prof. K. V. Dave
Evaluating the parametric optimization of
Electrical Discharge Machining(EDM) by
using & comparing Artificial Neural
Network(ANN) & Genetic Algorithm(GA).
UDP
Prof. A.N. Rathaur
Development of canned cycle for CNC milling
machine.
IDP
Prof. V.K. Jani
Efficiency improvement by Electric energy
with Reducing Heat loss by Applying FEA
analysis.
UDP
Prof. P.H. Darji
Design and FE analysis of spur gears for
improvement
of
fatigue
life
using
correctedgear profile.
5
6
7
8
120440708008
Jadav Chetankumar
Tribhovanbhai
120440708009
Parejiya Bhavesh Naginbhai
120440708010
Patel Krunalkumar
Narayanbhai
110440708001
Raval Pregneshkumar K
UDP
Prof. K. R. Gawande
Optimization and analysis of disc brake of
150cc motorcycle for its cost and weight with
the help of PRO-E & ANSYS software.
UDP
Prof. D.B. Morabbiya
Stress analysis and design optimization of
crank pin of single cylinder four stroke honda
petrol engine.
UDP
Prof. R.L. Patel
Design and optimization of impeller of
vaccum pump through CFD analysis.
UDP
Prof. A. B. Solanki.
Optimization and analysis of vertical axis wind
mill.
Prof P.H.Darji
Head of Mechanical Department
C. U. Shah University
Faculty of Technology & Engineering
C. U. Shah College of Engineering & Technology
Managed By Wardhman Bharti Trust
Accredited by NAAC with B Grade
Mechanical Engineering Department
DETAILS OF PROJECTS/ DISSERTATIONS (CU)
Semester: 4th M.Tech. (CAD / CAM)
Subject: OF PROJECTS/ DISSERTATIONS
Year-2015
Team/Group
Identification
No.
Enroll. No. of
Student
Student Name
Name of Internal
Faculty
Guide/Guides
1
13TE509001
Adeshra Darshan J.
Prof.P.H.Darji
Design & Analysis of Angular Contact Ball
Bearing for two Wheeler Clutch Assembly
UDP
2
13TE509002
Parmar Dharmendrasinh N.
Mr.D.B.Morabiya
Design & Weight Optimization of YJ3128
type Dump Truck’s Frame
UDP
Prof.K.R.Gawande
Optimization of process parameters
of
Abrasive Water Jet Machining for material
removal rate & Surface Roughness of SS304
– A case study
IDP
IDP
UDP
3
13TE509003
Patel Foram R.
Title of IDP/UDP /DISSERTATION
4
13TE509004
Sinha Kriti K.
Mr.A.N.Rathour
Optimization of manufacturing lead time using
3D printing rapid prototyping technique in
Investment casting industry-A case study.
5
13TE509005
Gohil Krunal C.
Mr.K.V.Dave
A feasibility study of six stroke engine by
analysis through available research design.
IDP/UDP
6
7
8
9
10
13TE509007
13TE509008
13TE509009
13TE509010
13TE509011
Aadeshra Nikunj R.
Patadiya Pratik P.
Yagnik Sahil Y.
Patel Sanket Y.
Malek Tanvirkhan A.
Mr.R.L.Patel
Analysis and optimization of Base of Vertical
Machining center (VMC) 640.
IDP
Prof.P.H.Darji
Fatigue life analysis and its improvement of 4Row cylindrical roller bearing used in hot
Rolling mill.
UDP
Prof.V.K.Jani
Comparative study and design analysis of
conventional gear box and bearingless gear
box for machine tool.
IDP
Prof.K.R.Gawande
Analysis and modification of existing design
of a 150 ton oil barge to rectify the heeling
problem and to improve its stability -A case
study
UDP
Mr.A.B.Solanki
Design, Modelling and Stress analysis of high
speed helical gear according to bending
strength and contact strength using AGMA
and ANSYS.
IDP
Dr. P.H.Darji
Head of Mechanical Department