STATE BANK OF HYDERABAD
(Associate of State Bank of India)
TENDER DOCUMENT
FOR
INTERIOR FURNISHING WORKS AT VINAYAKA NAGAR BRANCH,
NIZAMABAD
TENDER SCHEDULE.
Part 2. Price Bid.
Last date for submission of Sealed Tender:
Before 3.00pm on 02.04.2015
Tender to be submitted to:
The Deputy General Manager
State Bank of Hyderabad
Head Office,
Premises Department
2nd Floor, Methodist Complex,
Abids,
Hyderabad, 500001
PH: 040-23387297
1
INTERIOR FURNISHING WORKS AT VINAYAKA NAGAR BRANCH,
STATE BANK OF HYDERABAD
Name of the Contractor to whom issued: ______________________________
Address: _________________________________________________________
_________________________________________________________________
_________________________________________________________________
CONSULTANTS
DEARCH ARCHITECTS PVT. LTD.
6-264/13/1/A50, 4TH FLOOR, HAL RAGHAVENDRA COLONY,
ROAD NO.1, OPP. SBI BANK, JEEDIMETLA,
QUTHBULLAPUR, HYDERABAD – 500067.
Contact: +91 8464997539, 040 65557539.
EMAIL:hyderabad@dearch.net
2
BOQ FOR INTERIOR WORK OF VINAYAKA NAGAR BRANCH, NIZAMABAD, TELANGANA.
SL.NO.
1
1.1
DESCRIPTION
FALSE CEILING AND P.O.P. WORK
FALSE CEILING - GYP BOARD
QTY.
UNIT
2,205.00
S.FT.
2,020.00
S.FT.
510.00
S.FT.
RATE
(Rs.)
AMOUNT
(Rs.)
Providing and fixing ½” thk. Gypsum India board false ceiling
at levels as shown in the drg. From FFL. Rate shall be
inclusive of all Gypsum India components contained G.I.
perimeter channels of size 0.55mm thick having one flange of
20mm and another flange of 30mm and a web of 27mm
alongwith
perimeter
of
ceiling,
screw
fixed
to
brickwall/partition with the help of nylon sleeves and screws,
at 610mm centres. The suspending G.I.intermediate channels
of size 45mm, 0.9mm thick with two flanges of 15mm each
from the soffite at 1220mm centres with ceiling angle of width
25mm x 10mm x 0.55 thick fixed to soffite with G.I. cleat and
steel expansion fastners at every 610mm c/c. Ceiling sections
of 0.55mm thickness having knurled web of 51.5mm and two
flanges of 26mm each with lips of 10.5mm are then fixed to
intermediate channel with the help of connecting clip and in
direction perpendicular to the intermediate channel at 457mm
centres. 12.5mm tapered edge Gypboard is then screw fixed
to ceiling section with 25mm drywall screws driver or drilling
machine with suitable attachment.
1.2
The boards are to be jointed and finished so as to have a
flush look which includes filling and finishing the tapered and
square edge of the boards with jointing compound & joint
paper tape. Rate shall be inclusive of Scrapping, putty and
Two coats of plastic emulsion paint over a base coat Cut outs
for A/c machiness, spot lights, light fixtures, A/C. Grills, fire
and security systems cut outs, All Sections should adhere to
the manufacturers guidelines. Vertical sides visible will be
measured.
MODULAR FALSE CEILING - ARMSTRONG / equivalent
make
Providing and fixing Armstrong (Fine Fissured Micro Look
with Tagular Edge using 15mm Grid sections) false ceiling of
size 24”x24” at levels as shown in the drwng. from FFL. Rate
shall be inclusive of providing the total system with installation
etc.. The contractor has to maintain all tiles in good order and
replace the defected tiles (at his own cost) before handing
over the site for Branch Operations (till Inauguration).
2
PARTITIONS
Note :- The rate shall be include of frame work above
false ceiling level. Measurement should be taken up to
false ceiling level and visible portion only.
2.1
FULL HT SOLID PARTITION
WITH BOTH SIDE LAMINATE
3
Providing and fixing partition framing shall consist of Heavy
duty Aluminium Box Sections 50mm x 50mm @ 600mm c/c
both ways Horizontally and Vertically. The vertical alternate
frames to be fixed to the ceiling with necessary fixtures. The
framing shall be finished with 8 mm thk. Commercial ply on
both side and finished with 1.00 mm thk. Laminate / Vineer
finished with melamine polish. The shade of laminate / vineer
and polishing finish to be got approved from Bank / Architect.
The skirting should be as per approved laminate as per
drawing and direction. Rate shall be inclusive of necessary
hardware items, etc. Complete. The edge beadings with
steam beach wood should be finished with melamine.
2.2
PARTLY GLAZED PARTITION
WITH BOTH SIDE LAMINATE
175.00
S.FT.
360.00
S.FT.
35.00
S.FT.
Providing and fixing partition framing shall consist of Heavy
duty Aluminium Box Sections 50mm x 50mm @ 600mm c/c
Horizontally and Vertically . The vertical alternate frames to
be fixed to the ceiling with necessary fixtures. The framing
shall be finished with 8 mm thk. Commercial ply on both side
and finished with 1.00 mm thk. Laminate / Vineer finished with
melamine polish. The shade of laminate / vineer and polishing
finish to be got approved from Bank / Architect. Approved
make 10mm thick Clear Float glass to be fixed as per the
partition design provided by the architect/bank, The skirting
should be as per approved laminate as per drawing and
direction. Rate shall be inclusive of necessary hardware
items, etc. Complete. The edge beadings with steam beach
wood and vineer should be finished with melamine.The rate
shall include necessary etching film / LOGO.
2.3
SEMI HT. PARTITION IN LAMINATE
WITH BOTH SIDE LAMINATE
Specification same as 2 above but of low ht as per the
drawing. A 70mm x 15mm steam beach moulding with
champhered edge is to be provided on all external edges &
finished in mellamine as per details.
3
3.1
DOORS
ENTRANCE DOORS - IN SEASONED STEAM BEACH
WOOD
DOORS - WITH EVERITE / GOLDEN /HARDWIN /EVEREST
MAKE FITTINGS
Providing and fixing fully glazed doors at the main entrance
as shown in the drg. Door shall consist of wooden sections
steam beach wooden sections 6” x 2 " for top, bottom rails &
vertical styles rails, & 10mm thk. approved make clear float
glass shall be provided and fixed in the framing. Rate shall
include necessary etching film / LOGO, 1 pair of 12” long C
Shaped S. S. Handles , floor springs & Dead Lock And
mellamine polish for the wood frame.
4
3.2
SOLID DOORS- IN LAMINATE FINISH (with hardware
fittings MAKE EVERITE / GOLDEN /HARDWIN /EVEREST)
( WITH OR WITH OUT VISION PANEL AS PER DIRECTION
OF BANK / ARCHITECT
Providing and fixing solid doors of sizes as shown in the
drawing. The door shutter shall of 35 mm thick flush shutter
of approved make and finished with 1mm thick approved
laminate on both sides. The edges finished with steam beach
lipping. A door frame of 3.5” x 2" steam beach section shall
be provided finished in mellamine. Rate shall include Dead
lock ( Godrej Make), floor springs / door closure ( as the case
may be), door stopper, a pair of handles 12" SS Brushed
finished, 5" hinges 4 Nos., buffers, tower bolts, etc with
necessary hardware items and with or with t door frames.
3.2A
3.2B
3.3
3'-0" x 7'-0" - IN LAMINATE FINISH - (WITH 2" x 3.5"
finished size WOODEN FRAME)
With Door Closure
90
SFT
2'-6" x 7'-0" - IN LAMINATE FINISH - (WITH 2" x 3.5"
finished size WOODEN FRAME)
With Door Closure
60
SFT
5'6" X 2'0" IN LAMINATE FINISH FOR CASH/TELLER
1
NO.S
4'0" X 2'0" IN LAMINATE FINISH FOR SWC
3
NO.S
TELLER/SWC DOORS (IN LAMINATE FINISH)
Providing and fixing solid doors of sizes as shown in the
drawing. The door shutter shall of 35 mm thick flush shutter
of approved make and finished with 1mm thick approved
laminate on both sides. The edges finished with steam beach
lipping. A door frame of 3” x 1 ½” teak wood / steam beach
section shall be provided finished in mellamine. Rate shall
include approved make NIGHT LATCH LOCK, door closure,
door stopper, a pair of handles 9" SS Brushed finished, 5"
hinges 2 Nos., buffers, tower bolts, etc withnecessary
hardware items.
4
TABLE
5
Providing and fixing tables made out of 18mm thk MR ply
board of approved make cladded with 1.0mm laminate, as per
design in all visible areas. All the exposed edges to be
covered with wooden lippings and mouldings duly malamine
polish. The drawers to be made out of 18mm thk MR ply
board duly laminated in the front ,sides to be made out of
12mm MR ply and bottom to be made out of 6mm MR ply
and it should play in drawer sliding channels. The inside of
the drawer and the table to be duly polished . A legrest to be
provided duly polished made out of 3x1.5" wood section. A
shutter to be made by 18mm MR ply board cladded with
1.0mm laminate .The necessary locks handles to be provided
in each drawers and shutters.3" x 1/2" wooden skiritng to be
provided in all visible areas duly polished.On top of all tables
8mm thk glass to be placed duly edge polished.The table
should have key board tray and tea tray duly with 1.0MM
lamainate finished.The necessary wire managers to be
provided on the tables and provision for lights to be kept if
required in the front of the table.
A
CPU trolly to be provided every where with a provision of
castors to be provided .1.0mm laminate to be fixed as per
design including the raised level & perforations.All the
exposed wooden areas to be duly malamine polished The
work to be completed as per design and approval of the
Architect
CM TABLE 6' 0" X 3' 0"
1
NO
B
SW counter table 5'0" X 2'6"
8
NO
35
RFT
5
BACK OFFICE RUNNING COUNTER (2'-0" WIDE)
Providing and laying a Plain running counter with only key
board and Pencil Drawers at every 3'-0" length for over all
size of top as mentioned bellow. It shall consist of 3/4” thk.
Comm. Ply top as per design (double edge on the front and
back with 1 1/2" thk half round moulding on the edges)
supported on ¾” thk. Comm. Ply verticals at every 3' length.
Suitable (as per Architects design) wooden moulding with
mellamine shall be provided to the edge of the top. The top of
the counter should be finished with 1.5mm Laminate and all
other external surfaces to be finished in 1.0 mm. Thk.
Laminate (suede finish)of approved make.
1no. Computer key board tray (either ready made / made to
the order as per architects design using 3/4" thk comm ply
base and 1" x 2" round edged moulding on the front fixed with
telescopic/double(Hafele/ebco make) approved sliders)
6
1no. Pencil drawer unit as shown in the drg shall be provided.
Drawer shall consist of ½” thk. Comm. Ply sides, back and ¼”
thk. Comm. Ply base. Facia of drawers shall be of ¾” thk.
Comm. Ply finished in 1.5 mm. Thk. Laminate and with a
wooden moulding on top/bottom edge for handle. Each
drawer shall slide on a pair of hafele make telescopic drawer
sliders. Each desk shall be provided with a 3" dia PVC wire
manager at the given location.
6
CASH COUNTER / TELLER
5.5
RFT.
70
SFT
140
SFT
Providing and fixing top, front & side of cash counter made
out of 19mm thk block board as per design cladded with
1.0mm thk laminate on side and front & the edges to be
finished with necessary white beach or white ceader lippings,
mouldings, etc. Special 6" drawer to be made for the cash
with dividers of 12mm MR plywood and run with teleschopic
channel. The front of the drawer made out of 18mm MR ply
wood finished with 1.0mm laminate, sides 12mm MR plywood
and bottom to be made of 6mm thk block board . The inside
and sides of the drawer to be duly polished .The drawers and
shutters to be provided with necessary drawer sliding
channels, hinges, locks,Handles etc. A TW leg rest to be
provided duly polished. Inside of the unit to be polished in the
matching tone.All visible areas to be coverd with white beach
or white ceader lippings, mouldings with natural polish.Wire
manager, CPU trolly, keyboard tray to be provided and 4" SS
Lamiante skiriting to be provided in all areas.18mm thk
Granite to be provided at cash 2nd top outside counter top at
3' 8" lvl.the work should be completed as per detail design
and specification. ( Note: 18mm thk Jet Black Granite slab
(Rate approx Rs 150/-) to be placed on 2nd top duly edge
moulding polished as per direction.)
7
12MM THK GLASS FOR TELLER & SWC
Providing, making and fixing in position Cash and front
Counter front 12mm thk glass partition,the rate to include cost
of 12mm glass with frosted flim with dural shutter fixed,The
edges of cut out and the top edge of glass are to be mirror
polished and to be fixed to partition as per fixing details and
to boxing with concealed S. S. finished ‘D’ brackets.
The work to be completed as per approval and specificaion
of the Architect.
8
Side and Back Unit
7
Providing and fixing Side Unit/ Back unit made out of 18mm
thk MR ply wood finished with 1.0mm laminate in all exposed
areas . The drawers to be made out of 18mm thk MR ply
wood in the front cladded with 1.0mm laminate . sides to be
made out of 12mm plywood and bottom made out of 6mm
plywood duly painted in matching tone and it should play on
drawer sliding channels . The shutters to be made out of
18mm thk MR ply wood and should play on drawer sliding
castors on powder coated channels. The necessary locks ,
handles, etc to be provided . 4" high skiritng to be provided as
per matching tone all along the visible areas . Inside of the
unit to be enamel painted in matching tone . All the exposed
edeges of the boards/plywoods to be coverd with woden
lippings/mouldings duly polished all complete.The work to be
completed as per approval and specificaion of the Architect.
9
Writing Ledge
Providing and fixing writing ledge as per design made out
18mm thk MR ply wood with necessary groove paterns
1.0mm laminate ( color, vertical grain) to be cladded. 10mm
thk machine polished glass to be provided on top of the
writing ledge. Small boxes to be made out of 12mm MR
plywoods to be made on top of the writing ledge finished with
1.0mm laminate , inside enamel painted . 3" x 1/2" wooden
skirting duly polished to be provided. Provision of the light to
be kept.The work to be completed as per design and approval
of the architect.
10
6
RFT.
120
SFT
STORAGE
Providing and fixing Full height storage made out of 18mm
thk MR plywood finished with 1.0mm laminate in all exposed
areas . The drawers to be made out of 18mm thk MR plywood
in the front cladded with 1.0mm laminate .sides to be made
out of 12mm plywood and bottom made out of 6mm plywood
duly painted in matching tone and it should play on drawer
sliding channels . The shutters to be made out of 18mm thk
MR plywood and should play on drawer sliding castors on
powder coated channels. The necessary locks , handles, etc
to be provided . 4" high skiritng to be provided as per
matching tone all along the visible areas . Inside of the unit to
be enamel painted in matching tone . All the exposed edeges
of the boards/plywoods to be coverd with wooden
lippings/mouldings duly polished all complete.The work to be
completed as per approval and specificaion of the Architect.
low ht storage
11
ROLLER BLINDS
8
Providing and fixing roller blinds of vista Levolor of approved
shade and pattern. The rate shall include necessary scoch
gurd treatment on both sides. Necessary oparative
arrangements,frames to be provided. The work to be
completed as per specification and approval of the architect.
12
50
SFT
6900
SFT
150
SFT
200
SFT
TEXTURE PAINT
Providing , spraying and applying Texture paint as per
approved shade as per approval of the architect. Bi colour
texture paint will be used. The wall surface has to duly
prepared by scraping , removing the damaged plaster and
applying P.O.P to give a smooth surface as per approval of
the Architect.
16
NO.S
PAINTING
Providing and applying Acrylic emulsion paints after removing
the damaged plaster , replastering with 12mm thk cement
morter finished with P.O.P to make the necessary smoothnes
, reparing all damages . Then two coats of Primer of approved
make to be applied finished with two or more coats of acrylic
emulsion paints .The work to be completed as per approval
and satisfaction of the Architect.
15
1
SOFT BOARD / NOTICE BOARD
Providing and fixing pinup boards. It consist 12mm thick soft
boards of good density to be mounted over 12mm thick
comm. ply. The soft board will be covered with a plain fabric
(appox Rs.250 /Rmts. of approved colour) from front and
edges. Suitable steam beach moulding 25mm x 25mm size to
be fixed on all four sides and will be finished in melamine
polish.
14
SFT
3M SYNTHETIC DOOR MATS (4'-0" x 2'-0")
Providing & laying in place Synthetic Door Mats (3M) of sizes
not less that 4' x 2').
13
490
ENAMEL PAINT
Providing & applying 1st quality oil paint of approved make,
quality & shade. The rate shall include scrapping, levelling &
preparing the surface with primer quote.
17
SOFA
9
Providing and fixing sofa set to detail as shown in drawing
about 60cm wide and about 68cm high comprising second
class SAL WOOD framework using 50 x 40 with 8mm thick
com plywood covering on all sides. Seats finished with spring
hooked to MS plate 25mm width fixed to the seat frame. Both
seat frame and back covered with layer of jute cloth and
75mm latex rubber (2 layer for seat alone) finished with
12mm foam lining and uphostered to shape with fabric (basic
price Rs.300/m) for the rear of the back also and the under
surface of the seat finished with Gada cloth 8mm ply below
seat. Note: (For sofas materials like foam, latex rubber, gadacloth, spring
,fabric etc., to be approved by the Architects / Bank).
3 SEATER SOFA
18
8
NOS
1
Nos
1
Nos
1
Nos
690
SFT
30
SFT
SUGGESTION BOX
Providing and fixing suggestion box as per drawing &approval
of the architect
19
CHEQUE BROP BOX
Providing and fixing cheque deposit box as per drawing
&approval of the architect
20
CENTRE TABLE
Providing centre table as per drawing &approval of the
architect
21
COLUMN / WALL PANELLING
Providing and fixing panelling on column/wall. Framing shall
consist of Heavy duty Aluminium Box Sections 50mm x 25
mm @ 600mm c/c Both ways horizontally and vertically on
the column/wall.This framing would be covered by 8mm thk.
comm. Ply finished in approved 1.0mm laminate. Wooden
moulding, lipping etc. as directed by Bank / architect shall be
provided wherever required.
22
BOXING FOR ROLLING SHUTTER
WITH LAMINATE FINISH
Providing & fixing ¾” BWR ply boxing for the rolling shutters.
Necessary wooden framing shall be provided. The boxing
shall be finished on all exposed sides by 1mm laminate and
internally with enamel paint.
Note : rate shall include all necessary hardware fittings, etc.
23
TRAP DOOR FOR ROLLING SHUTTERS WITH LAMINATE
10
Providing and fixing trap doors consisting of 1/2” thk. comm.
ply shutters with a clear opening of 4.5" opening for smooth
operation of shutters and rest is closed with mirror screws (for
opening for servicing). The shutters shall be finished with
approved 1mm laminate, frame of 2” x 1 ½” wood sections
shall be provided for proper support and strength. Rate shall
be inclusive of necessary fittings like hinges of approved
make make), ball catches, tower bolts, etc.
24
200
SFT
1
Nos
1
Nos
10
RFT
DRESSING MIRROR with drawer unit
Providing and fixing dressing table made out of mirror of size
1' 6" x 3' 0" using 12mm thk. Comm. Ply on back with 6mm
thk. clear Mirror ( First quality) approved make, fixed on the
wall and tray of size 1' 6" x 1' 6"x 6" with one drawer for
cosmetics. The mirror and ply should be fitted in Steam beach
wooden moulding of size 25mm x 25mm finished with
melamine. Rate shall include necessary fixtures and
hardware fittings for dressing mirror & drawer unit.
(Measurement is measured only for mirror)
25
KEY BOX
Providing and fixing key box of size 1' 6"x1' 6"x 6" with all
sides and back with 18mm thick comm. Ply wood and
lockable glass shutters in 18mm ply , with 5 mm glass.
Necessary hooks to be provided inside the box. All exposed
areas and inside to be finished with 1 mm thick laminate of
approved shade. The edges of shutter and box to be lipped
with steam beach beeding polished with melamine. Rate shall
be inclusive of all necessary approved fittings like hinges,
locks, hooks etc. and any necessary hardware items.
26
LUNCH PLATFORM (1' 6" WIDE) IN JET BLACK
Providing and laying platform of 1'3" to 1'6" width ( Clear
width ) and at 2 '6" height ( finished top level) from floor of
approved 20mm thick Granite with bull nosed edges. It shall
be laid on BWR ply wood 19mm thick supported on Steel L
angle bracket. The plat form should be cantilevered from the
wall as shown in the drawing. 9" wide 19mm thick BWR ply
wood to be provided below the entire lunch counter for tiffin
and kitchen items. The ply surface to be painted with enamel
paint after applying putty. OR alternatively the lunch platform
to be made of RCC slab cantileved from the wall as per
required shape and size and the Granite slab to be fitted over
the slab properly with necessary plastering for exposed faces
of the slab.
27
WASH BASIN COUNTER ( 2'-0" WIDE ) (JET BLACK)
11
Providing and laying platform of 2’-0” width (clear) and at
2’-6” height (top) above ffl. Of approved 20mm thick granite
with bull nosed edge. It shall be supported on wall as shown
in the drg. Rate shall include the profile cutting and fixing of
below counter wash basin and polishing the exposed edges
of granite. A 2” granite facia shall be provided below the
nosed edge.
28
8
RFT
25
SFT
1
NO.
SHUTTERS BELOW GRANITE COUNTERS IN PANTRY
Providing and fixing 19mm thk. BWR ply shutters with ply
frame, skirting gap as shown in the drg. shall be maintained.
Division of shutters shall be made equally according to the
length of the counter.
Shutters shall be hinged to the framework and finished with
1.0mm thk. Laminate (suede finish) of approved shade from
outside, applied with approved oil paint from the inside and
edges of shutters with steam beach lipping. Rate shall be
inclusive of all necessary approved fittings like hinges, ball
catch, handle, and any necessary hardware items.
29
SINK
Providing and fixing of Basic model Sink of Size 450mm x
300mm with all internal fittings all complete. The rate shall
include the cost of providing inlet and outlet to the sink. Basic
cost of sink Rs. 1500/-
TOTAL Rs.
Discount % if any Rs.
NET TOTAL Rs.
SIGNITURE OF THE CONTRACTO
12