SUPER-F INC.
33 rue de l’Industrie, L’Assomption (Québec) Canada J5W 2T9
Tel.: (450) 589-3434- Cell.: (514) 386-6083- Fax : (450) 589-3442
PRODUCTS LIST
HOT PROCESS
SF-HPS : Mostly aiming at odors neutralization and gases reduction (H2S, NH3, mercaptans) from scrubber, recycling,
refining, dehydration and all other high temperature process.
SF-WBP : Mostly aiming at odors neutralization and gases reduction emitted by any scrubber, water tower, etc.
SF-Mercaptan « Scrubber » : Mostly aiming at odors neutralization and gases emissions reduction such as NH3, H2S,
mercpatans, emitted by scrubber or water tower.
SF96 -WF5S : Mostly aiming at odors neutralization and gases reduction (H2S) emitted by scrubbers.
SF-HPY & SFA Plus-HPS : Notably use to neutralize odors and reduce gases emissions coming from hot process’s
chimneys. For atomization or nebulization.
WASTE WATER
SFA Plus-Z5 & Z5S (H2S) : Mostly aiming at odors neutralization and gases reduction such as : H2S, ammonia,
mercaptans. Mixed, vaporized or injected to waste water streams. Can be injected at waste water entrance in pump stations,
water falls or elsewhere such as lagoons, ponds, etc.
SFA Plus-WF5 & SFA Plus-WF5S : Mostly aiming at odors neutralization and gases reduction such as : Hydrogen sulfide,
ammonia, mercaptans. These are solution active chemistries incorporating surfactants to permit the actives ingredients to
enter and stay in solution in the waste water neutralizing odors and gases into the water phase. These formulas has exhibited
sludge’s penetration and mobilizing capabilities in some systems promoting cleaning of systems tanks and piping.
SF-WF, SF-WF5 (H2S) : Mostly aiming at odors neutralization and gases reduction emitted by industrials waste water
streams, municipal pump stations, ponds, lagoons, etc. These formulas are surface actives where by the odors and gases are
emitted neutralizing them at the wastewater’s surface. Treatment by flotation to create an odors barrier.
SF-HPW, SF-HPW5S : Double function products. Treatment of bottom sludges and surface residues (oils, greases, fats,
pulps, etc.) aiming at odors neutralization and gases emissions reduction. Products separate in the course of the process, a
part comes up to the surface and the other goes to the bottom.
SF-1263 : Mostly aiming at ammoniac odors neutralization as well as ammonia gases emissions reduction. Treatment by
floatation to create an odors barrier.
SF-WF5S : Mostly aiming at odors neutralization as well as hydrogen sulfide (H2S) reduction emitted by wastes oils and
water emulsions. Have also the needed proprieties to reduce formaldehyde emissions generated by any sources.
SFA Plus-1204S : Mostly aiming at odors neutralization and gases emissions reduction such as NH3, H2S and mercaptans.
This formula could be injected in the water coming from belt-press, sludges or any other specific injection point where
malodorous and gases emissions are generated.
SF-WB, SF-WB5 (H2S) : For treatment of « Bottom Sludges Only » in any waste water facilities or streams, ponds,
lagoons. Those products settle down to treat bottom sludge’s for odors control.
SFA-1263 : Mostly aiming at odors neutralization and gases reduction emitted by septic tanks.
SFA Plus-888 NF : Mostly aiming at odors neutralization and gases reduction emitted by Municipal or Industrial sludges or
waste water. Can also be use to treat odors from ponds, lagoons, stagnant water , septic tanks etc.
SOLIDS WASTES, COMPOST, LANFILLS, GARBAGE
SF-HPY & SFA Plus-HPS : Large spectrum formulas having the needed proprieties to neutralize odors and to reduce gases
emissions generated by landfills, compost sites, garbage’s containers and piles or any solids wastes.
SFA NF : Mostly aiming at odors neutralization emitted by garbage’s trucks and containers.
SFA Plus-888 NF : Formula having the needed proprieties to neutralize odors and to reduce gases emissions emitted by
liquid, semi-liquid or solid wastes from municipal garbage’s truck, transfer sites, garbage’s containers and piles, landfills,
compost, lagoons, etc.
SFA Plus-1671 : Mostly aiming at odors neutralization and gases reduction generated by landfills, sludges piles, compost,
leachates , etc.
SFA Plus-LCH : For odors neutralization and gases emissions reduction emitted by compost, leachates and landfills.
SFW & SFW-5 : Vegetable oil base products for slow evaporation. Mostly aiming at odors neutralization and gases
reduction from garbage piles, lagoons, sludge’s piles, etc.
PULP & PAPER INDUSTRY
SF-HPW5 « C » : Mostly aiming at odors neutralization and gases emissions reduction emitted by Pulp and Paper Industry’s
sludges.
SF-WBP : Designed for Pulps and Papers Industry for « close circuits water » to neutralize odors and to reduce gases
emissions.
SF-HPW & HPW5S : Mostly aiming at odors neutralization and gases reduction emitted by waste water as well as sludge’s
produced by pulps and papers industry. Products have a double function to treat bottom sludge and surface residues.
SFA Plus-W6040 : For odors neutralization and gases emissions reduction emitted by wastes waters from pulp and paper
industry.
PETROLEUM INDUSTRY
SFA Plus-Mercaptan « S » : Mostly aiming at mercaptan’s odors neutralization and gases emissions reduction during
normal work operations and repairs for natural gas companies, refineries and other source in the oil and gas industry.
SF96-HP35 : Mostly aiming at odors and gases neutralization for refineries catalytic reactors at time of catalyst beds
changeover and cleaning.
SF96-Mercaptan « S »: Mostly aiming at mercaptan’s odors neutralization and gases emissions reduction during normal
work operations and repairs for natural gas companies, refineries and other source in the oil and gas industry.
SF96-Z5 NF & Z5C « S » (H2S) : Mostly aiming at odors neutralization and gases reduction such as ammoniac, hydrogen
sulfide, mercaptans emitted by fuel, lubricants, and other products from waste oils refining, refineries and other petroleum
products.
SF96-888 NF : Mostly aiming at odors neutralization emitted by butylacrylate, fuels, lubricants and other petroleum
products.
SF96-Hyan : Specially conceived to be injected into reactor’s water tank to neutralize odors and to reduce gases emissions
such as : methane, mercaptans and others gases.
SF96-1263 & MC250 : Mostly aiming at odors neutralization and gases emissions reduction emitted by petroleum products
and processes.
SF96-8004 NF : Mixed to resins/styrene mixtures for fiberglass, to reduce styrene emissions and neutralize the styrene odors.
Mixed to paints and solvents, wood and poles preservative solutions of pentachlorophenol, pure ethylacrylate.
SFA Plus-Z5C « S » : Aiming sulfur’s odors neutralization and gases emissions reduction emitted by sweetening plants
(transformation of H2S into sulfur). To be injected to waste water streams and sludges.
SFA Plus-Bunker : Mostly aiming at odors neutralization emitted by bunkers.
SFW-Bunker : Mostly aiming at odors neutralization emitted by bunker’s storage tanks surface. Can also be use to treat
parafinned oils odors.
PAINTS, ASPHALTS & WOOD PRESERVATIVES
SF 96-1263 & MC250 : Notably use to neutralize odors and to reduce gases emissions emitted by asphalt emulsions.
SF96-888 NF : Notably aiming at odors neutralization generated by creosote, solvents, woods preservatives,
pentachlorophenol , pur ethylacrylate and others.
SF96-8004 NF : Notably aiming at odors neutralization emitted by paints, solvents, woods and poles preservative, solutions
of pentachlorophenol, pure ethylacrylate.
SFA Plus-8004 NF : For odors neutralization emitted by Paint’s waste waters and sludges.
AGRICULTURAL, POULTRY, RENDERING PLANTS & SLAUGHTERHOUSES
SFA Plus-K100 : Mostly aiming at odors neutralization and gases reduction (NH3) generated inside agricultural buildings.
To treat hogs, cattles, livestock or any kind of manures. Also have the propriety of dissolving sludges.
SFA Plus-K123 & SFA Plus-K11 : Use to neutralize odors and reduce gases (NH3) emitted by fermented manures at
spreading time.
SFA Plus-1263 (NH3) : Specially conceived to neutralize odors and to reduce ammoniac (NH3) emitted by the poultry
industry.
SF-HPY : Notably aiming at odors neutralization and gases emissions reduction generated by rendering plants,
slaughterhouses, tanneries, etc. Can be added to blood, skin and others specific points as well as in the water used to wash
the walls, floors, equipment, etc.
SFA Plus-HPS : Notably use at odors neutralization and gases reduction emitted by rendering plants, slaughterhouses,
tanneries, etc.
Anim-Odeur : Powder form formula having the needed proprieties to neutralize odors emitted by animals litters.
Vapo-Air « Litière » : Specially conceived to neutralize odors emitted by animals litters. For atomization over clean or
contaminated litters or surrounded areas.
DOMESTIC
SFA Plus-SHV : For odors treatment of shoes, domestical or industrials vacuum, etc.
Anim-Odeur : Powder form formula having the needed proprieties to neutralize odors emitted by animals litters.
Vapo-Air « Litière » : Specially conceived to neutralize odors emitted by animals litters. For atomization over clean or
contaminated litters or surrounded areas.
Vapo-D17 : Mostly aiming at odors reduction up to neutralization generated into atmosphere. For domestic, commercial,
industrial, waste’s storage area, etc. For atomization or nebulization.
Atom-THM : Mostly aiming at atmosphere’s odors neutralization originating from cars, hotels room, washrooms, kitchens,
etc.
OTHERS
SFA Plus-6612 NF : Special product for steel mills. Mixed to animal fat waste quenching oil before recycling to neutralized
emitted odors and to reduce gases emissions.
SFA Plus-HP8 : Mostly aiming at odors neutralization from grease taps or any other greasy, oily wastes.
SF-HPY A : For neutralization of odors and different gases emissions reduction up to neutralization such as; mercaptans,
H2S, NH3, etc. For atomization in areas where the sources of odors cannot be reached or treated directly.
SFA Plus-1263 A : For neutralization of odors and different gas emissions reduction up to neutralization such as: ammonia
(NH3). For atomization in areas where the sources of odors cannot be reached or treated directly.
SFA Plus-WF5S A : For neutralization of odors and different gas emissions reduction up to neutralization such as: H2S.
For atomization in areas where the sources of odors cannot be reached or treated directly.
SFA Plus-Mercaptan « S » A : For neutralization of odors and different gas emissions reduction up to neutralization such as
mercaptans. For atomization in areas where the sources of odors cannot be reached or treated directly.
SF-Insecticide : To be mixed to malathion insecticide compounds for odors control.
ISIS : Odorant solution for domestic usage, office, car, etc.
Atom-X : For atomization in areas where the sources of odors cannot be reached or treated directly. Ex.: stacks, chimneys,
cooking areas, etc.
Atom-X1 : For reduction up to neutralization of H2S (hydrogen sulfide) odors. For atomization in areas where the sources
of odors cannot be reached or treated directly. Ex.: stacks, chimneys, cooking areas, etc.
Atom-X2 : For reduction up to neutralization of NH3 (ammonia) odors. For atomization in areas where the sources of odors
cannot be reached or treated directly. Ex.: stacks, chimneys, cooking areas, etc.
Atom-X3 : For reduction up to neutralization of mercaptans odors. For atomization in areas where the sources of odors
cannot be reached or treated directly. Ex.: stacks, chimneys, cooking areas, etc.
Atom-X4 : For reduction up to neutralization of mixed gases odors. For atomization in areas where the sources of odors
cannot be reached or treated directly (Ex.: stacks, chimneys, cooking areas, etc.) and also used as deodorant/odorant for
cleaning of public, commercial, industrial facilities and toilets.
Atom-X5 : For atomization in areas where the sources of odors cannot be reached or treated directly (Ex.: stacks, chimneys,
cooking areas, etc. ) and also used as deodorant/odorant for municipal waste water facilities and others.