NZQA registered unit standard 19577 version 3 Page 1 of 3 Title Perform measurements and calculations for rural contracting Level 3 Credits 4 Purpose People credited with this unit standard are able to perform measurements and calculations for rural contracting. Classification Rural Contracting > Agricultural Contracting Available grade Achieved Explanatory notes 1 Assessment against this unit standard must be based on evidence from a workplace context. 2 Definitions Operational requirements refer to requirements of the work being carried out, client and company requirements, and any regulatory requirements. Outcomes and evidence requirements Outcome 1 Perform measurements for rural contracting. Evidence requirements 1.1 Measurement devices are described in terms of their purpose in rural contracting. Range 1.2 Measurement devices selected are appropriate to operational requirements. Range 1.3 five of – thermometer, verniers, moisture meter, scales or weighbridge, pump meter, GPS, tape measure, measuring wheel, laser, range finder, pressure gauge, time device, measuring jug area, weight, liquid volume, time Measurements are made to a degree of accuracy appropriate to operational requirements. Range Infrastructure ITO SSB Code 101813 area, weight, liquid volume, time New Zealand Qualifications Authority 2016 NZQA registered unit standard 19577 version 3 Page 2 of 3 Outcome 2 Perform calculations for rural contracting. Evidence requirements 2.1 Area is calculated in accordance with operational requirements. 2.2 Volume is calculated in accordance with operational requirements. 2.3 Density is calculated in accordance with operational requirements. 2.4 Weight is calculated from volumes and densities. 2.5 Rates are calculated in accordance with operational requirements. two rates which may include but are not limited to – kilograms per hectare, litres per hour, litres per hectare, litres per kilowatt hour, hectares per hour, kilograms per hour Range Planned review date 31 December 2020 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 31 October 2002 31 December 2015 Review 2 25 June 2007 31 December 2016 Review 3 16 July 2015 N/A Consent and Moderation Requirements (CMR) reference 0101 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing Infrastructure ITO SSB Code 101813 New Zealand Qualifications Authority 2016 NZQA registered unit standard 19577 version 3 Page 3 of 3 to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact Infrastructure ITO at qualifications@connexis.org.nz if you wish to suggest changes to the content of this unit standard. Infrastructure ITO SSB Code 101813 New Zealand Qualifications Authority 2016