X-Ray & Radiology Products - National Medical Supplies

advertisement
LISTEM X-RAY
MODEL REX-525RF XRAY SYSTEM
REXC-525RF - High Frequency X-ray Generator Controller
with APR, AEC
LTN-25 - Fluoroscopic X-ray Tube Unit, Rotating Anode
BLD-150RK - Manual Collimator, Max 150kVp
BLD-150FK - Motorized Collimator, Max 150 kVp with Auto
Collimation
SFC-31 - Floor to Ceiling Mounted Tube Stand
DMT-80A II - 90 /-15 Tilting Table with Two-way Sliding Table
Top with Ion Chamber
SFD-4II - Motorized Rear Loading Type Spot Film Device
LIF-06 - 6" Image Intensifier
CS84201 - CCD Camera
HM1423CKR - 14" Monitor
MC-14 - Monitor Cart
BS-20 - Vertical Bucky Stand with Ion Chamber
With AEC + Auto Collimation
MODEL REX-525R XRAY SYSTEM
REXC-525R- High Frequency X-ray Generator
Controller with APR, AEC
REXH-525R- 500mA/125kVp High Frequency X-ray
Generator with Power Deck and High Tension
LTN-25 - Radiographic X-ray Tube Unit, Rotating
Anode
BLD-150RK- Manual Collimator, Max 150kVp
SFC-31R - Floor to Ceiling Mounted Tube Stand
KOB-III - Four-Way Floating Top Bucky Table with Ion
Chamber
HVC-5 - High Voltage Cable, 5m Long Pair with
Terminals
BS-20 - Vertical Bucky Stand with Ion Chamber
With AEC
MODEL REX-325R XRAY SYSTEM
REXC-325R- High Frequency X-ray Generator Controller with
APR, AEC
LTN-25- Three Phase, 380V, 50 Hz, 32kWRadiographic X-ray
Tube Unit, Rotating AnodeMax 125kVp, 1.0mm2.0mm Focal
Spot, 140kHU
BLD-150RK - Manual Collimator, Max 150kVp
SFC-31R - Floor to Ceiling Mounted Tube Stand
KOB-III - Four-Way Floating Top Bucky Table with Ion
Chamber
HVC-5 - High Voltage Cable, 5m Long Pair with Terminals
BS-20 - Vertical Bucky Stand with Ion Chamber
WITH AEC
1
MODEL MOBIX-1000 PHANTOGRAPHIC ARM MOBILE
SPECIFICATION:
REX-2.5- 120mAs/125kVp High Frequency X-ray
Generator with Tube Stand and Mobile Cart
LTY-26 M - Integrated Radiographic X-ray Tube Unit in
Mono Tank Max 125kVp, 1.2mm Focal Spot, 50,000H.U
BLD-150RK - Manual Driven Collimator
WITH AEC
MODEL C-ARM MOBILE X-RAY TV UNIT (MODEL: SM-20HF)
SPECIFICATION:
REX-2.5 - 120 mAs/125Vp High Frequency X-ray
Generator
DF-151SBR
-Integrated Radiographic X-ray Tube Unit in Mono Tank
- Max 125kVp, 0.5/1.5mm Focal spot, 45,000H.U.
LIC-09 - 9" Image Intensifier
LCC-RD - CCD Camera with Last Image Hold,
Rotation, 4 Memories
HM1723CKR - 17" Monitor
MC-17 - Monitor Cart
.
HUQ PRODUCTS
MODEL HQ-450XM
The quality of processing medical film not affects the
processing quality only, but affects us that we can
provide doctors the most correct image information for
patient, or not. Since this is related with humans life,
during designing this processor we treat the high quality
of processing the same as that we deal with a person life
Features:
- Fast Speed yet Smart Body
- Complete Auto Control Processing Program
- High Processing Quality
- Film Output Selectable
- Easy Maintenance
- Hi-efficient Dryer
- Advanced and Reliable Roller Transport System
- High Working Reliability
2
2
MODEL HQ-450XT
Features:
All plastic parts of 450XT processor chemical tank and
external cover are made by mold. Thus manufacture
and technique of whole machine reaches an advanced
level in current world and it is the sole product which is
made by mold in all brands of China. Another feature of
this machine is that it is the breakthrough among similar
products in the world because it has a very deep
chemical tank. Depth of chemical tank and film-transport
rack of 450XT is 140mm but with an 88mm width. Such
a design of deep depth and narrow width meets the high
requirement of large process volume, good chemical
anti-oxidation
performance, even processing density, no scratches
MODEL HQ-350XT
Features:
This desk-top small film processor with less expensive
price is newly launched in market by Huqiu Imaging. It
possesses only 0.36©O ground area with front and rear
two output modes for selection. Excellent performance
plus affordable price, the machine can be widely applied
in middle and small hospital for mode of several
machines in one hospital, several machines in one
operation room and processing mode instead of
traditional manual operation. Its sale price is much lower
than similar product and its fix and develop chemical
volume is only 4.5L. It is specially designed as a hiefficiency, energy-saving medical film processing device
for user who has some volume of film processing
everyday. Max processing width is 14 inch and fastest
whole process needs only 90 sec
3
3
MODEL PAX-400C DIGITAL PANORAMIC & CEPHALOMETRIC SYSTEM
Specification:
Normal Mode : 9.7
Normal Mode : 8
Weight - (kg) 220
(kw) 1.3
Sensitivity (better than film) - 1.2
220V ( ± 10% )
Acquisition Area (mm) 146 220 * 300
Sensor Type - Digital Multi - Linear Sensor
Gray Level - 4,096 (12 bit
Exposure Factors - 50 ~ 90 kV, 2 ~ 10mA
Focal Spot - 0.35 X 0.5 mm
Data Acquisition Speed - 20Mb/s
Power Supply - 220V
MODEL PAX- 1000 DIGITAL PANORAMIC
Feature
▪ Support All Kinds of Panoramic view including TMJ
▪ Outstanding image quality with minimum X-ray dose
▪ Intuitive user controls ensure precise and reproducible image
acquisition
▪ Dual speed vertical movement Up/Down Multi-Step
▪ Voice guidance for patient positioning
▪ Competitive price compare to its quality
Specification:
Tube Voltage - 60 ~ 90 Kv
Tube Current - 4~10 mA
Focal Spot - 0.35mm x 0.5mm
Exposure time (sec) - 13.8sec (Panoramic standard) 0.2~3.5
sec (Cephalometric)
Power Supply - 220 V / 110 V
Power (kW) - 1.3 Kw
-ONLY PANORAMIC
MODEL NEO-TOP-F FILM PANORAMIC & CEPHALOMETRIC X-RAY
Features:
- Wireless communication system between PC and
- panoramic system (After the system upgrade)
- One touch operating panel for user Convenience
- Automatic voice guidance system for patient's safety
- Embedded Self-testing system
- Available for all kinds of panoramic & cephalometric
imaging modes
Specification:
Exposure time (Sec)Panorama : 13.8 sec
Film CassettePanorama : 15X30 cm
Focal Spot0.35 X 0.5 mm
Exposure Factors50 ~ 90 kV, 2~10 mA
Nominal power1.3 kW
Power Supply220V / 110V
4
MODEL PAX-500 DIGITAL PANORAMIC ONLY
Reduces x-ray exposure time to 1.9 sec
- DSSI (Dual Shot Signal Integration for Cephalo) technology
- Eliminates moving artifact for cephalometric imaging
Eliminates blurred image of the incisor
- ALC (Adaptive Layer Control) technology
Achieves high-definition cephalometric image
- DUET (DUal EnhancemenT) Algorithm
- Produces efficient image not only for hard bone, but also for
soft tissue
Guarantees for a stable signal transfer
- CAN (Controller Area Network) system
- Supports high system reliance and convenience for
maintenance
Achieves stable and efficient image in any
condition
- AOP (Automatic Optimizing Process) technology
Achieves clearer image for critical usage
- Provides special scanning modes for the incisor, mandibular
canal, and maxillary molar
-ONLY PANORAMIC
MODEL PAX-500 VERSA PANORAMIC AND CEPHALOMETRIC SYSTEM
Visual & Voice Guidance for Patient’s safety in the
scanning process
LCD on the mirror & Voice Guidance for patient’s safety
in the scanning process
LDCP (Low Dark Current Processing) Logic Circuit
LDCP Logic Circuit ensures ZERO SNR (signal-tonoise ratio), high definition and wide range of gray
scale.
3 positioning beams - Vertical, Horizontal, and Canine
beams allow for an accurate patient positioning
Dual speed vertical movement - Motorized and
weight-balanced carriage up and down movement,
guarantee for a fast and an easy height adjustment with
no vibration and with low noise.
-PANORAMIC AND CEPHALOMETRIC
MODEL PAX-500 OS PRO DIGITAL PANORAMIC AND CEPHALOMETRIC
LCD on the mirror & Voice Guidance for patient’s safety
in the scanning process
LDCP (Low Dark Current Processing) Logic Circuit
LDCP Logic Circuit ensures ZERO SNR (signal-tonoise ratio), high definition and wide range of gray
scale.
3 positioning beams - Vertical, Horizontal, and Canine
beams allow for an accurate patient positioning
Dual speed vertical movement - Motorized and
weight-balanced carriage up and down movement,
guarantee for a fast and an easy height adjustment with
no vibration and with low noise.
Exposure time – 0.3 sec – The ideal solution for
patients still in their growth stages
No Image Distortion – Uses big-size Flat Panel
Detector
Premium Equipment – For the orthodontic Specialist
-PANORAMIC AND CEPHALOMETRIC
5
MODEL PAX-500 ECT DIGITAL PANORAMIC AND TOMOGRAM
Advanced Solution - Much Less Expensive but with much
Better Images”. With state-of-the-art X-ray imaging technology
for dental implant specialists. It brings total success in the
digital X-ray market.
Patient’s Safety - Scanning time is just 8 seconds or about
70% less exposure dose compared with other TOMO
equipments.
Simple & Convenient Alignment
* ECT does not need impression models. On other TOMO
systems using impression models, it takes around 20 minutes
to adjust alignment for TOMO scanning
* ECT is using the standard focal trough. For position
adjustments, it uses the SCOUT VIEWER method.
Powerful & exclusive Ez3D - ECT provides cross sectional
and longitudinal images. The slicing thickness selection
ranges from 0.186mm to 10mm. The Ez3D provides high
quality 3D Rendering images equal to a CT system.
-PANORAMIC AND TOMOGRAPHY
MODEL PAX-500 ECT VERSA PANORAMIC,CEPHALOMETRIC & TOMOGRAM
Advanced Solution - Much Less Expensive but with much
Better Images”. With state-of-the-art X-ray imaging technology
for dental implant specialists. It brings total success in the
digital X-ray market.
Patient’s Safety - Scanning time is just 8 seconds or about
70% less exposure dose compared with other TOMO
equipments.
Simple & Convenient Alignment
* ECT does not need impression models. On other TOMO
systems using impression models, it takes around 20 minutes
to adjust alignment for TOMO scanning
* ECT is using the standard focal trough. For position
adjustments, it uses the SCOUT VIEWER method.
Powerful & exclusive Ez3D - ECT provides cross sectional
and longitudinal images. The slicing thickness selection
ranges from 0.186mm to 10mm. The Ez3D provides high
quality 3D Rendering images equal to a CT system.
-PANORAMIC, CEPHALOMETRIC AND TOMOGRAPHY
MODEL PAX-500 ECT OS PRO PANORAMIC,CEPHALOMETRIC & TOMOGRAM
LCD on the mirror & Voice Guidance for patient’s safety
in the scanning process
LDCP (Low Dark Current Processing) Logic Circuit
LDCP Logic Circuit ensures ZERO SNR (signal-tonoise ratio), high definition and wide range of gray
scale.
3 positioning beams - Vertical, Horizontal, and Canine
beams allow for an accurate patient positioning
Dual speed vertical movement - Motorized and
weight-balanced carriage up and down movement,
guarantee for a fast and an easy height adjustment with
no vibration and with low noise.
Exposure time – 0.3 sec – The ideal solution for
patients still in their growth stages
No Image Distortion – Uses big-size Flat Panel
Detector
Premium Equipment – For the orthodontic Specialist
-PANORAMIC, CEPHALOMETRIC AND TOMOGRAPHY
6
MODEL UNI3D DIGITAL PANORAMIC AND ECT
SPECIFICATION:
X-ray Beam - Cone Beam
Data bit - 16bit
Slice Thickness(mm) - 0.186 ~10 mm (default 1.5mm)
Scan Time (sec) - 20 sec / 8.3 sec
Patient Position - Stand
Patient Alignment - Align based on Standard Data of
Focal Trough, Optional : Align with Scout View
FOV (WXH) - 50 X 50 mm, 80 X 50 mm
Reconstruction Time - Under 1 min
Basic Display View - Longitudinal / Cross Sectional /
Axial / Coronal / Sagittal
Reference Pano View - Support
3D Image - Default
-PANORAMIC AND E.C.T.
MODEL UNI3D OS DIGITAL PANORAMIC, E.C.T. AND CEPHALOMETRIC
SPECIFICATION:
X-ray Beam - Cone Beam
Data bit - 16bit
Slice Thickness(mm) - 0.186 ~10 mm (default 1.5mm)
Scan Time (sec) - 20 sec / 8.3 sec
Patient Position - Stand
Patient Alignment - Align based on Standard Data of
Focal Trough, Optional : Align with Scout View
FOV (WXH) - 50 X 50 mm, 80 X 50 mm
Reconstruction Time - Under 1 min
Basic Display View - Longitudinal / Cross Sectional /
Axial / Coronal / Sagittal
Reference Pano View - Support
3D Image - Default
-PANORAMIC, E.C.T. AND CEPHALOMETRIC
MODEL PICASSO PRO FOV 12X7
ADVANCED FEATURE OF PICASSO
- Standard Dental CT
- FOV 12x7
- Basic Equipment for computerized Dental Clinics
- Existing network of more than 1200 dentists world wide
- As a reliable partner E-WOO is beyond experience
- The worlds first “Combined All in One” Digital Dental CT,
Panoramic and Cephalometric X-ray
- Paving to Global Customer Service System supporting the
Global Customer Service Network
Innovative Technology
- Fastest 3D Reconstruction Time
- Fixed CT Sensor
- Digital Sensor Holder
- One Touch LCD Monitor
- 3D Volume Rendering
7
MODEL PICASSO TRIO SP FOV 8X5
ADVANCED FEATURE OF PICASSO
- Standard Dental CT
- FOV 8X5
- Basic Equipment for computerized Dental Clinics
- Existing network of more than 1200 dentists world wide
- As a reliable partner E-WOO is beyond experience
- The worlds first “Combined All in One” Digital Dental CT,
Panoramic and Cephalometric X-ray
- Paving to Global Customer Service System supporting the
Global Customer Service Network
Innovative Technology
- Fastest 3D Reconstruction Time
- Fixed CT Sensor
- Digital Sensor Holder
- One Touch LCD Monitor
-3D Volume Rendering
-PANORAMIC AND E.C.T.
MODEL PICASSO TRIO SP FOV 12X7
ADVANCED FEATURE OF PICASSO
- Standard Dental CT
- FOV 12X7
- Basic Equipment for computerized Dental Clinics
- Existing network of more than 1200 dentists world wide
- As a reliable partner E-WOO is beyond experience
- The worlds first “Combined All in One” Digital Dental CT,
Panoramic and Cephalometric X-ray
- Paving to Global Customer Service System supporting the
Global Customer Service Network
Innovative Technology
- Fastest 3D Reconstruction Time
- Fixed CT Sensor
- Digital Sensor Holder
- One Touch LCD Monitor
-3D Volume Rendering
-PANORAMIC AND E.C.T.
MODEL PICASSO TRIO SC FOV 12X7
ADVANCED FEATURE OF PICASSO
- Standard Dental CT
- FOV 12X7
- Basic Equipment for computerized Dental Clinics
- Existing network of more than 1200 dentists world wide
- As a reliable partner E-WOO is beyond experience
- The worlds first “Combined All in One” Digital Dental CT,
Panoramic and Cephalometric X-ray
- Paving to Global Customer Service System supporting the
Global Customer Service Network
Innovative Technology
- Fastest 3D Reconstruction Time
- Fixed CT Sensor
- Digital Sensor Holder
- One Touch LCD Monitor
-3D Volume Rendering
-PANORAMIC, E.C.T. AND CEPHALOMETRIC
8
MODEL PICASSO TRIO OS FOV 12X7
ADVANCED FEATURE OF PICASSO
- Standard Dental CT
- FOV 12X7
- Basic Equipment for computerized Dental Clinics
- Existing network of more than 1200 dentists world wide
- As a reliable partner E-WOO is beyond experience
- The worlds first “Combined All in One” Digital Dental CT,
Panoramic and Cephalometric X-ray
- Paving to Global Customer Service System supporting the
Global Customer Service Network
Innovative Technology
- Fastest 3D Reconstruction Time
- Fixed CT Sensor
- Digital Sensor Holder
- One Touch LCD Monitor
-3D Volume Rendering
-PANORAMIC, E.C.T. AND CEPHALOMETRIC
MODEL MASTER 3D-15 (FOV 16X7 16X10 20X15)
The New Revolution in Digital Radiographic 3D
imaging :
- With the most Flexible FOV (16X7 16X10 20X15 as
well as the largest in size .
- Adjustable Voxel Sizes: 0.2 / 0.3 / 0.4mm (0.165mm
also available)
- Reasonable Radiation Dosage based on FOV
flexibility
- Short reconstruction time with GPU Solution
- Convenient & Modern Design
- With the most advanced Softwares:
"EzImplant", a specialized 3D image Viewer
"EasyDent", a patient management & Panoramic /
Cephalometric image Viewer,
“EzGate”, a DICOM file interface program with PACS
MODEL MASTER 3D-15 (FOV 16X7 16X10 20X19)
The New Revolution in Digital Radiographic 3D
imaging :
- With the most Flexible FOV (16X7 16X10 20X19 as
well as the largest in size .
- Adjustable Voxel Sizes: 0.2 / 0.3 / 0.4mm (0.165mm
also available)
- Reasonable Radiation Dosage based on FOV
flexibility
- Short reconstruction time with GPU Solution
- Convenient & Modern Design
- With the most advanced Softwares:
"EzImplant", a specialized 3D image Viewer
"EasyDent", a patient management & Panoramic /
Cephalometric image Viewer,
“EzGate”, a DICOM file interface program with PACS
9
MODEL MASTER 3DS-15 (FOV 16X7 16X10 20X15)
The New Revolution in Digital Radiographic 3D
imaging :
- With the most Flexible FOV (16X7 16X10 20X15 as
well as the largest in size .
- Adjustable Voxel Sizes: 0.2 / 0.3 / 0.4mm (0.165mm
also available)
- Reasonable Radiation Dosage based on FOV
flexibility
- Short reconstruction time with GPU Solution
- Convenient & Modern Design
- With the most advanced Software:
"EzImplant", a specialized 3D image Viewer
"EasyDent", a patient management & Panoramic /
Cephalometric image Viewer,
“EzGate”, a DICOM file interface program with PACS
WITH WHEEL CHAIR ACCESS
MODEL MASTER 3DS-19 (FOV 16X7 16X10 20X19)
The New Revolution in Digital Radiographic 3D
imaging :
- With the most Flexible FOV (16X7 16X10 20X19 as
well as the largest in size .
- Adjustable Voxel Sizes: 0.2 / 0.3 / 0.4mm (0.165mm
also available)
- Reasonable Radiation Dosage based on FOV
flexibility
- Short reconstruction time with GPU Solution
- Convenient & Modern Design
- With the most advanced Softwares:
"EzImplant", a specialized 3D image Viewer
"EasyDent", a patient management & Panoramic /
Cephalometric image Viewer,
“EzGate”, a DICOM file interface program with PACS
WITH WHEEL CHAIR ACCESS
MODEL PAX-400 DIGITAL PANORAMIC
Specification:
Exposure Time (sec) – 13 sec (Standard Panoramic
Adult)
Weight (kg) – 180 kg
Power – 1.3 kw
Acquisition Area – Panorama – 146mm x 300 mm
Sensor Type – Panorama – Multi Linear Sensor
Gray Level – 4,096 (12 bit)
Tube Voltage – 40 – 90 kv (adjustable by 1 kv)
Tube Current – 2 -10 ma (adjustable by 1 mA)
Focal Spot – 0.35 mm x 0.5 mm according to IEC336
ONLY PANORAMIC
10
ESX INTRA-ORAL X-RAY (WALL MOUNTED) WITH ANYSENSOR INTRA-ORAL SENSOR
Specification:
Dimension(W X H X D) 205 X 140 X 85mm(Wall Type)
Input Power Supply - 220V ± 10%
Focal Spot - 0.8 mm
HV Output - Maximum 500W
Tube Voltage - 65 Kv
Anode Current - 5mA
Operation Temp - 0.08 ~ 1.5 sec
Total Filtration - 2mm Al
Operation Temp - 10 ~ 40°C
Operation Humidity - 30 ~ 75 % RH
Weight - 34.0 kg (Chair Type)
23.8 kg (Wall Type)
X-RAY ACCESORRIES
SOFTWARE PACKAGES
1. CASSETTE FOR PANORAMIC
2. CASSETTE FOR CEPHALOMETRIC
3. FILM PROCESSOR
1. EasyDent – For PMS
2. Orthovision – For Orthodontic
Analysis
3. EZ-Implant – For Implant Analysis
11
Download