DOWNSTREAM PRODUCTS
SINOPEC International
Edition 2011.1
Your Solution to China Sourcing
Go back
SINOPEC International
Downstream Products
Go back
SINOPEC International
Contact
Downstream Products
Furnace
Contact
Mr. Guan Jian
Email
wzguanj@sinopec.com
Tower
Reactor
Heat Exchanger
Mr. Wang Zhong Bo
wzwangzb@sinopec.com
Non-ferrous Equipment
Compressor
Pump
Distributed Control System
Ms Li Jia
Ms Liao Min
Mr. Wang Jia Yue
wzlijia@sinopec.com
wzliaom@sinopec.com
wzwangjy@sinopec.com
Go back
SINOPEC International
1 Furnace




Cracking Furnace
Reforming Furnace
Square Box Type Heater
Cylinder Type Heater
Go back
SINOPEC International
1.1 Cracking Furnace
•
•
•
•
•
•
•
•
Type: Ethylene Cracker
Max. Capacity: 190,000.00T/Y
Material: Carbon steel/stainless steel/ High alloy/Low alloy
Standard: ASME/ API530/API560
Max. operating pressures: 0.4MPa
Max. design temperatures: 1125℃.
Certificate: ASME, PED
Designed by: Technip, S&W, Lummus, SEI,SSEC
900kt/a Ethylene Cracking unit in Thailand
Go back
SINOPEC International
1.2 Reforming Furnace
•
Type:
HYCO Reformer
Synthetic Reformer
Hydrogen Reformer
•
Max. Capacity:
Hydrogen Reformer :100,000.00 Nm3/h, Carbinol Reformer: 850,000.00T/Y,
HYCO Reformer: 700,000.00T/Y
•
•
•
•
•
•
Material: Carbon steel/stainless steel/ High alloy/Low alloy
Standard: ASME/ API530/API560
Max. operating pressures: 3.85Mpa
Max. design temperatures: 985℃
Certificate: ASME, PED
Designed by: Technip, Davy,Linde, Lurgi, SEI,LPEC
120k m3/h HYCO Reformer in SINOPEC-YPC
Go back
SINOPEC International
1. 3 Square Box Type Heaters
•
Type:
Atmospheric and vacuum distillation Heater
Gasoline Hydro treating Heater
Diesel oil Hydro treating Heater
Hydro cracking Heater
Catalytic cracking Heater
Pyrogenic Heater
Reforming extraction heater
•
•
•
•
Material: Carbon steel/stainless steel/ alloy
Standard: ASME/ API560,API530
Certificate: ASME, PED
Designed by: Technip, Lummus ,Kirchner ,SEI,LPEC
2.8MT/Y Diesel oil Hydro treating Heater in SINOPEC-FUJIAN
Go back
SINOPEC International
1. 4 Cylinder Type Heaters
•
Type:
Atmospheric and vacuum distillation Heater
Gasoline Hydro treating Heater
Diesel oil Hydro treating Heater
Hydro cracking Heater
Catalytic cracking Heater
Pyrogenic Heater
Reforming extraction heater
•
•
•
•
Material: Carbon steel/stainless steel/ alloy
Standard: ASME/ API560,API530
Certificate: ASME, PED
Designed by: Technip, Lummus ,Kirchner ,SEI,LPEC
2.1MT/Y Hydro cracking Heater in SINOPEC-FUJIAN
Go back
SINOPEC International
2. Tower
General Description:




Large size(Max. Diameter: 12m,Max. Length: 140m,Max. Weight: 1500t)
Size control including straightness,levelness, welding,PWHT is our strength
The overall delivery, logistics advantages
Petrochemical plants and chemical installations units
Go back
SINOPEC International
2.1 Tower – Refining Project, Atmospheric & Vacuum Plant
– Features:
Materials：CS + 410S
Dimensions：D- 10.8m
L- 50m
T-（42+3）mm
W- 255T
Vacuum Column for Sinopec Qingdao refinery (Ф10800 )
Go back
SINOPEC International
2.2 Tower - Refining Project, Coking Plant
– Features:
Materials： SA387 Gr11 Cl2 + 410S
Dimensions：Diameter- 9.6m
Length- 42m
Thickness-（50+3）mm
Wight- 386T
Coke Drums For India ESSAR Group (Ф9600, 489ts)
Number: 6
Go back
SINOPEC International
2.3 Tower - Ethylene Project, Ethylene Plant
– Features:
Materials： CS
Dimensions：Diameter - 6.6m
Length - 66.7m
Thickness - 52mm
Wight- 597T
Propylene Column No.1 For Sinopec Zhenhai Refinery (Ф6600, 597ts)
Go back
SINOPEC International
2.4 Tower - Ethylene Project, Ethylene Plant
– Features:
Materials： CS
Dimensions：Diameter- 11.4m
Length- 60.6m
Thickness- 34mm
Wight- 767T
Quench Tower
For Sinopec Zhenhai Refinery (Ф11400, 767ts)
Go back
SINOPEC International
2.5 Tower - EO/EG Plant
– Features:
Materials： CS+304L
Dimensions：Diameter -9.0m
Length- 47.1m
Thickness- (100+3)mm
Wight - 847T
Main Wash Column For Sinopec Zhenhai Refinery (Ф9000, 847ts)
Go back
SINOPEC International
2.6 Tower - PX Project
– Features:
Materials： CS
Dimensions：Diameter- 8.8m/7.4m
Length- 120.7m
Thickness- 91mm/54mm
Wight- 1092T
Xylenes Rerun Column For Dragon Aromatics (Zhangzhou)Co.Ltd (Ф8800, 1092ts)
Number: 2
Go back
SINOPEC International
2.7 Tower - PTA Project
– Features:
Materials： S32205
Dimensions：Diameter- 4.4m
Length- 41m
Thickness- 20/16mm
Wight- 89T
Solvent dehydration Column For Sinopec Yangzi PetroChemical (Ф4400, 89ts)
End
Go back
SINOPEC International
3 Reactor
General Description:
Design as per specific customer requirements, and international codes and standards.
Quality assurance: U ,U2 stamps by ASME.
The quality systems are covered under ISO 9001 ,ISO 14000…
The quality systems are backed by the latest facilities for radiography, including 12 MeV linear
accelerator ,ultrasonic (including TOFD ), maganetic particle & liquid penetrant examination.
The reactors cover the guarantee against defects of mechanical design, fabrication, inspection and testing.
Supply these materials as per ASME/ASTM.
In case of oversized of reactors, we can also complete at Site.
Go back
SINOPEC International
3.1 Reactor-Brief Introduction
FEA Stress Analysis for Reactors
Go back
SINOPEC International
3.2 Reactor-Forging
– Features:
Material: 2-1/4Cr-1Mo (SA336 F22.3),
2-1/4Cr-1Mo-1/4V(SA336 F22V) + Overlay Weld
Diameter: ≤6500 mm
Wall thickness: ≤336 mm
Pressure: ≤21 MPa
Temperature: ≤482°C
Licensor: UOP, Chevron, AXENS
2050 Tons Weight Direct Coal Liquefaction Reactor
Go back
SINOPEC International
3.3 Reactor-Plate
– Features:
Material: 21/4Cr-1Mo(SA387 Gr22.2)
21/4Cr-1Mo-1/4V(SA542 D.4a)
Wall thickness: ≤200 mm
Pressure: ≤15 MPa
Temperature: ≤454°C
Licensor: UOP, Chevron, AXENS
Go back
SINOPEC International
3.4 Continuous Reforming Reactor
– Features:
Material: SA387 Gr.22.2
Diameter: ≤4000 mm
Wall thickness: ≤100 mm
Pressure: ≤2.7 MPa
Temperature: ≤555°C
Licensor: UOP
Go back
SINOPEC International
3.5 LLDPE Reactor
– Features:

Material: Alloy Steel

Diameter: φ8060/φ5000 mm

Height:
43 m

Weight :
405 ton

Pressure:

Temperature: 170 ℃

Licensor: UNIVATION, SINOPEC TECH.
2.8 MPa
LLDPE Reactor for 300 KTA LLDPE Plant
Go back
SINOPEC International
3.6 HDPE Reactor
– Features:

Material: LTCS, SS

Leg Height: 62 m

Pressure:

Temperature: -46 ℃

Licensor: INEOS、SHERVON PHILIP
6.4 MPa
300 KTA HDPE Reactor with INNOVENE Process Technology
Go back
SINOPEC International
3.7 PP Reactor
– Features:
Process Capacity: ≤ 450 KTA
Material: LTCS, SS
Pressure: 6.4MPa
Temperature: -46℃
Licensor: SINOPEC TECH.，BASELL，DOW，TECHNIP，JBS
300 KTA PP Reactor with SINOPEC Process Technology
Go back
SINOPEC International
3.7 PP Reactor
450KTA PP Spherizone Reactor with Basell Technology
Newly Process Technology of Basell Spherizone 450KTA PP Plant
Go back
SINOPEC International
3.7 PP Reactor
Key Reactor for 300 KTA PP Plant with DOW Process Technology
Go back
SINOPEC International
3.8 Styrene Reactor
– Features:

Process Capacity: ≤ 320 KTA

Pressure:

Material: 800HT, 304H

Temperature: 900 ℃

Weight:

Licensor: ABB LUMMUS, UOP, MONSANTO
0.81 MPa
180 ton
240 KTA Styrene Reactor with UOP Process Technology
Go back
SINOPEC International
3.9 EO Reactor
– Features:
Material: SA302 GR.C, SA789 S31803,
SA508 GR.3, or GB equal.
Diameter: 6760 mm
Tube Length: 13 m
Weight: 850 ton
Pressure:
S: 6.58 MPa
Temperature: S: 288°C
T: 2.334 MPa
T: 325°C
Licensor: SD, DOW, SHELL
Φ6760 EO Reactor with SD technology
Go back
SINOPEC International
3.10 POSM Reactor
– Features:
Material: SB463-UNS N08020
Diameter: 4300 mm
Length:
15 m
Licensor: LYONDELL
Dehydration Reactor for 240 KTA POSM Plant
Go back
SINOPEC International
3.10 POSM Reactor
– Features:
Material: 304L SS clad CS
Diameter: 9300 mm
Length: 36.2 m
Weight: 355 ton
Licensor: LYONDELL
Oxidation Reactor for 240 KTA POSM Plant
Go back
SINOPEC International
3.11 Styrene Reactor
– Features:
Material: SA240-304H/SB409/UNSNO8811/

SA312-TP304H
Diameter: ≤5900mm
Wall thickness: ≤48mm
Weight: 499 ton
Licensor: BP
Go back
SINOPEC International
3.12 Acrylonitrile Reactor
– Features:
Material: SA387
Diameter: 8900mm
Wall thickness: ≤30mm
Weight: 473 ton
Go back
SINOPEC International
3.13 Other Reactor
– Features:
Gasoline Oil Absorbing Desuldurization Reactor
Process Capacity: 1500 KTA
Material: Alloy Steel +SS Overlay Weld
Pressure:
4.86 MPa
Temperature: 470℃
Licensor:
SINOPEC TECH., CONOCO PHILLIPS
Gasoline Oil Absorbing Desuldurization Reactor
End
Go back
SINOPEC International
4 Heat Exchanger
General Description:
 Shell and Tube Heat Exchanger;
Fixed tube sheet: AEM, BEM
U bundle: AKU,BKU
Floating head: AES, AET, BES, BET
 Type:
Double Tubesheet Heat Exchanger;
Double Pipe Heat Exchanger;
Spiral Heat Exchanger;
Helical Baffle Heat Exchanger;
Gas Cooler;
Screw Lock Ring Heat Exchanger;
Various Enhanced Tube Heat Exchanger
 Codes & Standards: ASME Section VIII Div.1 PED; AS1210; API; RINA; NR-13
 Materials：CS / SS / Duplex / Ni / Cu / Ti / Zr / Ta
 Dimensions：D-6m/ L-22m /s= 20000m2
Go back
SINOPEC International
4.1 Heat Exchanger - Double Tubesheet Heat Exchanger
– Features:
 Tube side medium and shell side medium completely separated.
 Any case when two media cannot be mixed.
Go back
SINOPEC International
4.2 Heat Exchanger - Double Pipe Heat Exchanger
– Features:
 Higher flow rate enhances the heat transfer
 Simple structure, easy to fabricate and disassemble
 Bearing higher pressure
 Application Fields: Small scale heater, cooler, condenser
Go back
SINOPEC International
4.3 Heat Exchanger - Spiral Heat Exchanger
– Features:
Higher heat transfer coefficient than shell-tube heat exchanger
Compact design with large heat transfer area
Anti-fouling with self-cleaning
Allows large temperature difference
Application Field: Heaters, coolers, condensers and
evaporators in food industry and chemical industry.
Go back
SINOPEC International
4.4 Heat Exchanger - Helical Baffle Heat Exchanger
– Features:
Overall heat transfer coefficient increased by 30%
Pressure drop reduced by 20%
Dead zone eliminated and fouling is reduced
Flow-induced vibration is prevented
Application Fields:
Water-water coolers, oil-oil preheat exchangers
Gas-gas heat exchangers, gas-liquid heat exchangers,
compressor aftercoolers, reboilers and condensers, etc.
Go back
SINOPEC International
4.5 Heat Exchanger - Gas Cooler
– Features:
Main Technical Advantages: mainly applied in
PP/HDPE/LDPE/LLDPE plants; utilizing the annealed
stainless steel tubes and with the fluidized tube end of heat
exchangers that are specially designed and machined to
ensure the powder medium not to be accumulated or scaled
or deposited on the inner wall during the transmission and
reaction process.
Single Line Processing Capacity: 450 KTPY
Main Materials: LTCS, SS
Maximum Operation Temperature: -46℃
Maximum Operation Pressure: 6.4Mpa
Main Design Standard: ASME, PED, GB
Main Licenser: SEI, BASELL, DOW, TECHNIP, JBB
Go back
SINOPEC International
4.6 Heat Exchanger - Screw Lock Ring Heat Exchanger
– Features:
Application: Hydrogenation Cracking System
Diameter: up to 1.8m
Temperature: up to 450 degree
Pressure: up to 20MPa
Go back
SINOPEC International
4.7 Heat Exchanger - Corrugated Tube Heat Exchanger
– Features:
Heat transfer coefficient 1.2-2.4 times more than smooth tubes
Corrugation can compensate temperature difference stress
Intensified turbulent flow reduces fouling remarkably
Application Fields:
Heating, cooling, boiling and condensing
Liquid-liquid HE,
Liquid-gas HE,
Gas-gas HE,
Condensers,
waste heat boiler
Go back
SINOPEC International
4.8 Heat Exchanger
- Corrugated Low Finned Tube Heat Exchanger
– Features:
Heat transfer coefficient 1.3-2.2 times more than smooth tubes
Intensified turbulent flow reduces fouling remarkably
Shallower and wider grooves on the external walls are better for draining of
condensate and make liquid films thinner
Application Fields:
Heating, cooling, boiling and condensing
Liquid-liquid HE,
Liquid-gas HE,
Gas-gas HE,
Condensers,
Waste heat boiler, reboiler, and vapor generator
Go back
SINOPEC International
4.9 Heat Exchanger - T-shaped Finned Tube Heat Exchanger
– Features:
 Boiling heat transfer coefficient 2-4.8 times more than smooth tubes
 The wall superheat is remarkably lower
 Self-cleaning reduces fouling
 Lower operation cost
（Φ2600mm;89t）
Go back
SINOPEC International
4.10 High Exchanger - Internally Grooved Tube Heat Exchanger
– Features:
Heat transfer coefficient 1.3-3.5 times more than smooth tubes
Pressure drop is similar to that in smooth tube
End
Go back
SINOPEC International
4.11 Heat Exchanger - Air Cooler
Max. size: (Length) 15m x (Width) 6m
Max. weight : 28 ton
Material: Carbon steel/stainless steel/ alloy
Standard: ASME/ API661
Max. operating pressures: 700 bars
Max. design temperatures: 650oC.
Application: Refineries, GTL and Petrochemical Industry
Certificate: Germany TUV ISO9002 Quality System
Go back
SINOPEC International
4.11 Heat Exchanger - Air Cooler
A. Induced Draft Unit
The induced draft unit gives a steady and endurable thermal performance
due to the protection of the finned surface against wind, rain and snow by
the plenum chamber. The induced draft also ensures better air distribution,
less hot air recirculation, less fouling and lower noise levels at grade.
Go back
SINOPEC International
4.11 Heat Exchanger - Air Cooler
B. Forced Draft Unit
The forced draft unit allows an easy access for maintenance to the
bundles. Furthermore, the fans remain in the cold ambient air temperature
and allow high process inlet temperature as
well as with a long life.
Go back
SINOPEC International
4.11 Heat Exchanger - Air Cooler
C. Humidified Air Cooler
The combination of air cooler and humidification section is a good
solution in some dry areas and hot climates. The ambient air is cooled by
direct contact with water in the humidification section, which further
reduces the temperature of process streams and improves the heat
exchange for a fixed set of process temperature.
Go back
SINOPEC International
4.11 Heat Exchanger - Air Cooler
D. Recirculation Unit
In very cold climates (RUSSIA, CANADA and ALASKA of USA) and
also for special process, it is necessary to provide hot air recirculation to
prevent freezing or congealing. Different types
of hot air recirculation are possible thanks to various combination of
louvers, steam coils, auto variable fans and / or variable speed.
Go back
SINOPEC International
4.11 Heat Exchanger - Air Cooler
E. Air Cooled Vacuum Steam Condenser
This anti-freeze steam condenser is supported on an A-frame steel
structure equipped with a vacuum package system including tanks, pumps
and control devices.
End
Go back
SINOPEC International
5 Non-ferrous Equipment
General Description:


Materials：Duplex / Ni / Cu / Ti / Zr / Ta/
Codes & Standards：
ASME PED、SAMSUNG、S&W、TECHNIP、TEMA、UHDE、UOP、BASF
BAYER、BP、CTCI、FOSTERWEELER、HITACHI、KTI
Go back
SINOPEC International
5.1 Non-ferrous Equipment – Duplex Heat Exchanger
– Features:
 Material: AL-6XN (SB688)- 6％Mo
 Dimension: 4100*30000mm
 Weight: 145t
 Tubes: Φ50.8*1.02*15000mm;2500
 Tube Material: Seacure
 Application Field: Brine Waste Water Treatment
Go back
SINOPEC International
5.2 Non-ferrous Equipment - Titanium Heat Exchanger
– Features:
Material: SA516-70/Ti Gr.2
Dimension: 2430*4250*20000mm
Weight: 85 ton
Application Field: PTA
Go back
SINOPEC International
5.3 Non-ferrous Equipment - Copper Alloy Heat Exchanger
– Features:
Material: SB111 B10
Dimension: 4000*36*3802mm
Weight: 150t
Application Field: Ethylene Project
Go back
SINOPEC International
5.4 Non-ferrous Equipment - Si-Cu Alloy Heat Exchanger
– Features:
Material: SB96 C65500
Dimension: 1420*10*6850mm
Weight: 21 ton
Application Field: Ethylene Project
Go back
SINOPEC International
5.5 Non-ferrous Equipment - Ni-Cu Alloy Heat Exchanger
– Features:





Codes & Standards：ASME
Material: B3O
Dimension：φ1420*10*6850mm
Weight: 21ton
Application Field: LTC
Go back
SINOPEC International
5.6 Non-ferrous Equipment - Ni based Alloy Heat Exchanger
– Features:
Material: N10276
Dimension：φ3200*18*10244mm
Weight: 53.3t
Application Field: Polyformaldehyde Project
Go back
SINOPEC International
5.7 Non-ferrous Equipment - Ni based Alloy Heat Exchanger
– Features:
Material: C2000
Dimension：φ1300*8*6582mm
Weight: 10.68t
Application Field: PTA
Go back
SINOPEC International
5.8 Non-ferrous Equipment - Zirconium Alloy Heat Exchanger
– Features:
 Material: Zirconium
 Dimension：φ1600*10*6000mm
 Weight: 17.5t
 Type: Zr U-bundle Heat Exchanger
 Application Field: Acetic Acid Project
Go back
SINOPEC International
5.9 Non-ferrous Equipment - PTA Ti-clad Dehydrate Tower
– Features:






Material: SA516-70/Ti Gr.2 Zirconium
Dimension： Φ5500*30000mm
Weight: 230t
Type: PTA Ti-clad Dehydrate Tower
Required Hot Gas Cycling Test
Application Field: PTA
Go back
SINOPEC International
5.10 Non-ferrous Equipment - Main Distillation Column
– Features:





Material: SB-463 N08020
Dimension： φ3985*34111mm
Weight: 230t
Type: Main Distillation Column
Application Field: Acetic Acid Project
Go back
SINOPEC International
5.11 Non-ferrous Equipment - Preliminary Cleaning Column
– Features:




Material: Incoloy825
Dimension: φ1300mm;L＝11180mml
Type: Preliminary Cleaning Column
Application Field: Fluorine Chemical Project
Go back
SINOPEC International
5.12 Non-ferrous Equipment - Dehydration Reactor
– Features:






PO/SM Unit Dehydration Reactor
Material: SB-463-UNS N08020
Dimension： φ4300*18*15000mm
Weight: 103t
Type: Dehydration Reactor
Application Field: Ethylene Project
Go back
SINOPEC International
5.13 Non-ferrous Equipment - Reactor
– Features:




Material: N08810
Dimension:Ф2800;
Type: Dehydration Reactor
Application Field: Polysilicon Project
Go back
SINOPEC International
5.14 Non-ferrous Equipment - Reactor
– Features:
 Material: Inconel 600 （SB168 N06600)
 Application Field: Fluorine Chemical Project
Go back
SINOPEC International
5.15 Non-ferrous Equipment - Fluidized Bed Reactor
– Features:



Material: Incoloy600
Dimension:φ3000*10800mm
Application Field: Fluorine Chemical Project
Go back
SINOPEC International
5.16 Non-ferrous Equipment - Zr-CS Claded Plate Reactor
– Features:





Material: Ti & Ti Alloy
Dimension: φ3500*6550mm
Weight: 32t
Type: Zr-CS Claded Plate Reactor
Application Field: Chemical Project
Go back
SINOPEC International
5.17 Non-ferrous Equipment - Reactor
– Features:


Type: Zr-CS Claded Plate Reactor
Application Field: Chemical Project
End
Go back
SINOPEC International
6 Compressor
centrifugal compressor, reciprocating compressor and pump to national key engineering
fields such as petroleum, petrochemical, metallurgy, air separation, pharmacy, nuclear pump,
textile, national defense, scientific research and etc.
1milliontons/year ethylene:
10milliontons/year refinery
unit：
Fertilizer Unit：
500000tons/year synthetic
ammonia unit：
Large-size Air Separation
Coal-Chemical Unit：
Unit：
-- 1200000tons methanol
-- 60000 air separation
-- feed gas
-- Catalyzed Reforming
-- feed gas
-- Olefin
-- Aromatic Extraction
-- synthetic gas
-- Fertilizer
-- Catalyzing and Cracking
-- ammonia refrigerating
-- Delayed Coking
-- air separation compressor
-- Hydrogenation Cracking
800000tons/year urea-carbon
-- Hydrofining
dioxide
Go back
SINOPEC International
6.1 Centrifugal Compressor - MCL type
Flow range: 20-8500m3/min
Type: MCL, 2MCL, 3MCL,DMCL horizontal split casing
Material: Carbon steel/stainless steel
Standard: API617/API670/API614
Max. operating pressures: 6Mpa
Application: fertilizer, ethylene plants, refinery processes, city gas
distribution , air separation, methane plants , nature gas plants etc.
Certificate: API
Go back
SINOPEC International
6.2 Centrifugal Compressor - BCL type
Flow range: 20-4500m3/min
Type: BCL, 2BCL, 3BCL vertical split casing
Material: stainless steel forging
Standard: API617/API670/API614
Max. operating pressures: 70Mpa
Application: fertilizer, ethylene plants, refinery processes,
city gas distribution , air separation, methane plants ,
nature gas plants etc.
Certificate: API
Go back
SINOPEC International
6.3 Centrifugal Compressor - PCL type
Flow range: 17000-35000m3/min
Type: PCL vertical split casing
Material: stainless steel(forging)
Standard: API617/API670/API614
Max. operating pressures: 8.5Mpa
Application: for natural gas pipelines and petrochemical processes.
Certificate: API
Go back
SINOPEC International
6.4 Centrifugal Compressor - SVK type
Flow range: 3500-165000m3/h
Type: SVK8-SVK160, Packaged Integrally Geared Centrifugal
compressor
Material: carbon steel
Standard: API672/API670
Max. operating pressures: 3Mpa
Application: for air separation and instrument station etc
Certificate: API
Go back
SINOPEC International
6.5 Axial Compressor - MA type
Flow range: 400-16000m3/min
Type: MA60-MA160, axial compressor
Material: carbon steel/stainless steel
Standard: API617/API670/API614
Max. operating pressures: 0.35-0.65Mpa
Application: for large size blast furnace system and
catalytic crack gas compression in large oil refinery etc.
Certificate: API
Go back
SINOPEC International
6.6 Centrifugal blower - D type
Flow range: 45-3500m3/min
Type: D60-D1600
Material: carbon steel
Standard: GB standard
∆P=10-300KPa
Application: for small size blast furnace system and
catalytic crack gas blower etc.
Go back
SINOPEC International
6.7 Centrifugal blower - GM type
Flow range: 50~1000 m3/min
Type: GM25-GM75
Material: carbon steel
Standard: GB standard
Discharge Pressure=30～147KPa(G)
Application: for small size water treatment plant
Go back
SINOPEC International
7 Intelligent Plant Solution
•
•
•
•
Distributed Control System (DCS)
Advanced Process Control (APC)
Ethernet for Plant Automation (EPA)
Intelligent Instruments
Go back
SINOPEC International
7.1 Distributed Control System (DCS)
Brings powerful operational functions that are highly reliable for process control, friendly
openness for third-party integration, and maximum efficiency in project commissioning
whether it is small, medium, large, even extra-large. Has been applied in Petrochemical,
Chemical, Oil & Gas, Power, Cement, Metal, Pulp & Paper and Food & Beverage
industries.
CE certified
EMC III class protection
ISA-G3 standard anti-corrosion
Dual redundant configuration
High speed industrial Ethernet
Support Modbus, PROFIBUS, FF,
HART and EPA, etc.
Support on-line upgrading
Go back
SINOPEC International
7.2 Advanced Process Control (APC)
Gives full consideration of the complex nature of the real process control.
APC-Suite helps realize optimal production and enhance the
bottom line of your plant.
Software Package
APC-Adcon: Multi-variable predictive robust control
APC-PCalc: On-line process calculation
APC-PFC: Predictive fction control
APC-sensor: Soft sensor for measuring
ESP-iSYS-A: Core real-time database
Go back
SINOPEC International
7.3 Ethernet for Plant Automation (EPA)
Developed the world's first EPA protocol chip accepted as
IEC/PAS 62409. EPA is an advanced real-time Ethernetbased field-bus for communication among field
equipments.
Advanced real-time Ethernet-based field-bus
IEC/PAS 62409
Go back
SINOPEC International
7.4 Intelligent Instruments
AR3100 Operational Recorder
16-channel universal isolated inputs
128MB built-in memory + external CF
card
0.125s sampling period5.6 TFT color LCD
R5000 Paperless Recorder
32-channel universal isolated inputs
128MB built-in memory + external CF
card
RS-232C/RS-485 interface
10.4 TFT color LCD
RS-232C/RS-485 + Ethernet interface
Developed the world’s first paperless recorder.
Pioneers in this sector and brings the latest
technologies to intelligent instruments for
industrial use
Process Calibrator
Measuring temperature with
thermocouple or RTD
Ramping and stepping the output
Storage and recall of 10 setups
Auto flash terminals
Isolator
No high-integrity earth needed
Full input/output/power supply isolation
High performance components
Standard DIN-rail mounting + Plug & Play
terminals
End
Go back
SINOPEC International
8 Centrifugal Pump
- Standard： ISO, ANSI,API ,RCC-M,GB,ASME, EN,DIN …
- Capacity：1～20,000 (m3/h)
- Temperature：-192 ℃ ～+450 ℃
- Material：CS, SS, DUPEX SS, SUPER DUPLEX SS
- Head：~ 3,500 (m)
- Pressure： 35 (MPa)
Go back
SINOPEC International
8.1 EAP Series Petrochemical Process Pump (OH2)
Product Summarize:
Design and manufacture in accordance with API610 standard with
high reliability and performance, wide application of petrochemical
industry, various structural transformations vary form different working
conditions, as EAP9 typical structure, EAPK open-impeller structure,
EPAD lightweight structure, EPAG high-pressure structure, EAPX low
flow rate structure.
Design Parameter:
Capacity：2~2600m3/h
Head：~300m
T：-80~+450℃
Pressure：~10.0Mpa
Applicable codes and standards: API610 10th Edition
Go back
SINOPEC International
8.2 EDS Series Axially Split Double Suction Pump (BB1)
Product Summarize:
Double suction impeller for one-stage structure; double suction impeller for the
first stage and single suction impeller for second stage of dual-stage structure,
hydraulic utilize advanced design means such as 3D modeling, DFD flow field
analysis, etc based on excellent hydraulic model at home and abroad, wide
scale of flow and head, high efficiency, good performance concerned anticavitation, is new generation energy-efficient product.
Design Parameter:
Capacity：100~12000 m3/h
Head：~440 m
T：-40~+220 ℃
Pressure：~5.0MPa
Applicable codes and standards：API610 10th Edition
Go back
SINOPEC International
8.3 HDD Series Heavy Industry Chemical Pump (BB2)
Product Summarize:
Apply to rigorous and heavy industry working conditions with advantages such
as safe and reliable structure, stable operation, convenient maintenance, long
service lift, etc.
Design Parameter:
Capacity：50~4500 m3/h
Head：~700 m
T：-80~+450 ℃
Pressure：~15 MPa
Applicable codes and standards：API610 10th Edition
Go back
SINOPEC International
8.4 SCSK Series Axially Split Multistage Pump (BB3)
Product Summarize:
Casing of this serial is volute structure, centerline supporting, symmetrical
arrangement of impellers, self balance of axial loads without complex
balancing device such as balancing plate or balance drum; suction and
discharge are arranged under the casing, dismounting or installation without
dismantling inlet/outlet pipelines, is applicable to high-temperature and highpressure conditions.
Design Parameter:
Capacity：10~1500 m3/h
Head：~2000 m
T：-40~+200 ℃
Pressure：~25 MPa
Applicable codes and standards：API610 10th Edition
Go back
SINOPEC International
8.5 SCSG/DCSG Series High Pressure Multistage Pump(BB4/BB5)
Product Summarize:
SCSG is single-casing ring-section horizontal multistage pump, the external
pressure parts use forgoing or casting, balance axial loads by combined
effect with drum-plate-drum, effective control of “flash evaporation” when
operation, realize axial force dynamic balance, bearings bear few axial loads.
DCSG is double-casing ring-section horizontal multistage pump, the external
pressure parts use forgoing or casting, the core is ring-section which can be
pulled out entire, dismounting or installation without dismantling inlet/outlet
pipelines, is applicable to high-temperature and high-pressure conditions.
Design Parameter:
SCSG
Capacity：5~1000m3/h
Head：~2500 m
T：-80~+210 ℃
Pressure：~27 MPa(max)
DCSG
Capacity：5~1000m3/h
Head：~3200 m
T：-80~+450 ℃
Pressure：~35 MPa(max)
Applicable codes and standards：API610 10th Edition
Go back
SINOPEC International
8.6 SCSZ/DCSZ Series Self Balanced Horizontal Multistage Pump(BB4/BB5)
Product Summarize:
SCSZ is single-casing ring-section horizontal multistage pump, the external
pressure parts use forgoing or casting, symmetrical arrangement of
impellers, self balance of axial loads without complex balancing device, is
applicable to transporting medium containing certain particles.
DCSZ is double-casing ring-section horizontal multistage pump, he external
pressure parts use forgoing or casting, the core is ring-section which can be
pulled out entire, dismounting or installation without dismantling inlet/outlet
pipelines, is applicable to high-temperature and high-pressure conditions:
Design Parameter:
SCSZ
Capacity：5~1000m3/h
Head：~2500 m
T：-80~+210 ℃
Pressure：~27 MPa(max)
DCSZ
Capacity：5~1000m3/h
Head：~3200 m
T：-80~+450 ℃
Pressure：~35 MPa(max)
Applicable codes and standards: API610 10th Edition
Go back
SINOPEC International
8.7 DCSK Series Axially Split Horizontal Multistage Pump(BB5)
Product Summarize:
DCSK is double-casing structure, the external pressure parts use forgoing;
the core is axially split, symmetrical arrangement of impellers, can be pulled
out entire, dismounting or installation without dismantling inlet/outlet
pipelines, is applicable to high-temperature and high-pressure conditions:
Design Parameter:
Capacity：45~1440m3/h
Head：~3200 m
T：-80~+450 ℃
Pressure：~35 MPa
Applicable codes and standards: API610 10th Edition
Go back
SINOPEC International
8.8 LDB Series Vertical Multistage Pump (VS6)
Product Summarize:
Design and manufacture in accordance with API610 0th Edition, thorough
consideration and design concerned structure as supporting, cooling,
maintenance, etc, can be equipped with kinds of auxiliary and monitoring
system to achieve higher safety and reliability. Various structural
transformations vary form different working conditions, as LDB-A multistage
radial diffuser structure, LDB-B multistage blower structure, LDB-C one- and
dual-stage large flow mixed-flow structure.
Design Parameter:
Head：~1000m
T：-80~+250℃
Pressure：15 Mpa
Applicable codes and standards：API610 10th Edition
Go back
SINOPEC International