Customer Name Here
Date Here
Overview of
UltraLube™
• Biobased Lubricants
• Meet federal bio-preferred
requirements
• USDA BioPreferred® listed
• Base oil derived from U.S.A. grown
vegetables
• Renewable resource
• Byproducts returned to food chain
• Biodegradable
• Reduce dependency on OPEC
• More price stable than petroleum
• No zinc, no chlorine
• Replace and mix readily with
petroleum based products
Quality
• Superior performance to
petroleum based lubricants
• Superior Lubricity Less friction, less
heat, less wear
• Can operate machinery at higher
speeds
• Naturally higher viscosity index
• Less likely to thin out at high
temperatures
• Higher film strength
• Withstands pressure better
• Superior performance to
petroleum based lubricants
Biobased Grease Provides Better
Wear Protection
• Biobased GCLB grease provides 35%
better wear protection in 4-Ball
Weld* test
Biobased MP Lithium
• Requires fewer additives
Petroleum MP Lithium
• Less volatility/Higher flash point
• Safer to use
0
100
200
300
400
500
4-Ball Weld (kg)
* The Four-Ball Weld Test is used to measure load carrying capability. A steel ball is
loaded and rotated against 3 fixed steel balls. The contact surfaces are covered with test
lubricant, a load is applied and a timed test is performed. At the end of each run,
additional weight is loaded onto the balls, and the test re-run. The weld point is the load
at which the balls weld together.
Competitive Testing – 4-Ball Wear Test
•
Test Standard – ASTM D 4172
•
Three steel balls are fixed into a cup by a locking collar so they cannot rotate
•
A fourth ball rides on the three with a given weight (40 kgf) on it for a specific amount of time (60
minutes) per the ASTM standard
•
The cup and balls are filled/covered with the test fluid and the fourth ball is spun per the above at
165°F
•
After the test, the three fixed balls are removed and the resulting “scars” are measure in diameter in
mm.
•
The width of the scar is recorded. This diameter (in mm) measures how much of the ball has worn
away. The bigger the number, the more wear took place.
•
This gives a good comparison basis for how well a product lubricates under constant pressure &
heat build-up.
•
Test conducted by Independent Test Lab – National Ag-Based Lubricants Center (NABL)
4-Ball Test Machine
4-Ball Wear Test Results
•
UltraLube™ is the clear winner with the
smallest scar diameter of 0.468 mm
•
WD-40 was a 3rd at 0.52 mm scar diameter
(+11.1% more wear)
•
WD-40 Industrial Grade blue WORKS
silicone was 5th at 0.6 mm scar diameter
(+28.2% more wear)
•
WD-40 Industrial Grade blue works White
Lithium Grease Spray was 2nd at 0.5 mm
scar diameter (+6.8% more wear)
•
3-in-1 was 4th at 0.547 mm scar diameter
(+16.9% more wear)
•
Permatex B-Force (a biobased lubricant)
was 6th at 0.605 mm scar diameter (+29.7%
more wear)
•
Liquid Wrench test was inconclusive due
to non-repeatability and wide variances
4-Ball Wear, Scar Diameter (mm) D 4172
4-Ball Wear,
Scar
Diameter
(mm) D 4172
blue WORKS White Lithium
blue WORKS Silicone
Permatex B-Force
blue
WORKS
data taken
from WD40 data
flyer
BWSi0910M
Liquid Wrench
3 in 1
WD-40
UltraLube
0.4
0.45
0.5
0.55
0.6
Competitive Testing – Falex Pin & V-Block Test
•
Test Standard – ASTM D 3233
•
Test runs a steel journal pin at 290 rpm’s (±10 rpm) against two stationary V-blocks
•
The pin is lubricated and placed in the V-block assembly which sits in the oil at 165°F
•
Load is applied to the V-blocks by a ratchet mechanism and an increasing load is
applied
•
The result is a point of how much load/pressure/torque it took to stop the pin from
rotating
•
This gives a good comparison of a lubricants ability to stand up to extreme pressure,
load, heat and it’s ability to reduce friction
•
Test conducted by Independent Test Lab – National Ag-Based Lubricants Center
(NABL)
Falex Pin & V-Block Test Machine
Falex Pin & V-Block Test Results
•
•
•
UltraLube™ again is the clear
winner with the highest load
applied – 3,077.87 lbf (67.2% better
than it’s closest competitor)
Permatex B-Force was 2nd at
1,841.02 lbf
Liquid Wrench was 3rd at 1,801.75
lbf
•
WD-40 industrial Grade White
Lithium Grease was 4th at 1,439 lbf
•
WD-40 industrial Grade Silicone
was 5th at 1,300 lbf
•
WD-40 was
•
3-in-1 was last at 706.93 lbf
6th
at 1,039.77 lbf
Falex Pin & V-Block Test D 3233
3500
3000
Falex Pin & VBlock Test D
3233
2500
2000
1500
1000
500
0
blue WORKS
data taken
from WD-40
data flyer
BWWI0910M
4X More Lubrication
•
The chart shows the results of ASTM
D3233 conducted by NABL using
UltraLube® high oleic base oil and
three different viscosities of
petroleum base oils. Compare the
UltraLube base oil result of 1,756 lbF
(pounds of force) to the average of
the petroleum base oils of 434 lbf
•
UltraLube® has 4 TIMES the lubricity,
or friction reducing capability of
petroleum base oil.
•
UltraLube® professional –grade,
biobased lubricants - GETS IN,
STAYS ON™
4X More Lubrication
• In addition to tremendous film strength, high viscosity index and ability
to take heat and pressure, vegetable oil molecules are “polar”. This
means they are attracted to and bond to metals.
• Petroleum oils are not “polar” and will run off of metals. They have poor
adhesion characteristics.
• Remember:
• GETS IN, STAYS ON™ Powerful professional-grade UltraLube® instantly
penetrates, creating long-lasting bonds to metal, even plastic surfaces.
• READY FOR ANYTHING UltraLube® professional-grade, biobased
lubricants contain advanced EP additives, have high drop points, high
flash points and resist thinning at high temperatures. They reduce
friction better than petroleum products. UltraLube® will mix with or
replace petroleum based products.
Product Offering
• Greases Line Definition
o Multi-Purpose Grease
Contains advanced EP additives. Prevents rust and corrosion for
metal-to-metal contact areas, heavy loads and extreme pressure
applications.
• 85 gram cartridge
• 16 Kg pail
• 400 gram cartridge
• 54 Kg and 180 Kg drum
• 450 gram tub
o White Lithium Grease
Designed for metal-to-metal contact areas, heavy loads and
extreme pressure applications. Contains advanced EP additives.
Prevents rust and corrosion. Has outstanding dielectric properties.
Silicone-free and recommended for plastic parts.
• 225 gram squeeze tube
• 400 gram cartridge
• 168 Kg pail
• 54 Kg and 180 Kg drums
• Greases Line Definition
o LMX Red Grease
A premium, water resistant EP grease that meets NLGI’s tough GC-LB
specifications. Excellent for auto and truck chassis and wheel bearings,
trailer bearings, fleet, farm, plant and industrial applications. Ideal for
heavy load applications.
• 400 gram cartridge
• 450 gram tub
• 16 Kg pail
• 54 Kg and 180 Kg drums
o Disc/Drum Wheel Bearing Grease
A premium, water resistant EP grease that meets NLGI’s tough GC-LB
specifications. Excellent for automotive and truck chassis and wheel
bearings, trailer bearings, fleet and farm wheel and trailer bearings. Ideal
for heavy load applications.
• 450 gram tub
• 16 Kg pail
• 54 Kg and 180 Kg drums
• Greases Line Definition
o Moly EP Grease
Designed for metal-to-metal contact areas, sliding motions and
sleeve-journal rotating shafts
• 400 gram cartridge
o 5th Wheel Trailer Grease
Contains EP and graphite additives. Protects ferrous metals from
rust and corrosion. Simply toss the “smash-pack” on the plate and
drop the trailer. The pack disintegrates and grease is distributed.
• 57 gram crush squeeze packet
o H1 Food Machinery Grease
Approved by the NSF and meets criteria established by the USDA H-1
and US FDA regulation 21 CFR 178.3570 “Lubricants With Incidental
Food Contact”. Has EP additives to protect under heavy shock loads.
Provides superior adhesion and protects all ferrous metal
components from rust and corrosion.
• 400 gram cartridge
• 16 Kg pail
• Oils Line Definition
o Air Tool Oil
High quality oil with EP additives for long tool life. Blended with
emulsifiers to pick up moisture. Superior lubricity provides fast
action and prevents sticking. Excellent rust and oxidation
protection.
• 230 ml bottle
o Gear Lube (SAE 80w/90)
Formulated for heavy loads and high torque. Withstands severe
shock and reduces vibration and noise. Specially blended to pick up
moisture. Meets API GL-5 requirements.
• 1 liter bottle
o Chain Saw Bar & Chain Oil
Tackifiers resist sling-off at high speeds. Reduces vibration and
noise for smooth operation. Superior lubricity prevents smoking
under load. Protects bar and chain from rust and corrosion.
• 1 liter bottle
• 4 liter bottle
• Oils Line Definition
o H1 Food Grade Chain and Cable Lube
Approved by the NSF and meets criteria established by the
USDA H-1 and US FDA regulation 21 CFR 178.3570
“Lubricants With Incidental Food Contact”. Excellent for
lubrication of chains, cables and rollers, providing superior
lubricity to protect moving parts. Less mist generation than
petroleum-based products. Contains no chlorine. Safe for
all metals.
• 225 ml trigger spray
• 400 ml aerosol
• 4 liter refill bottle
o ISO Hydraulic Oil
Maintains stable viscosity through wide temperature
ranges. Reduces wear through superior thin-film
protection. Particularly suited for use near water. Available
in 3 ISO Grades; 32, 46 and 68.
• 19 liter pails
• Oils Line Definition
o Universal Hydraulic Tractor Fluid
Designed for equipment using a shared hydraulic fluid
reservoir operating clutches, brakes and lift systems.
Protects against wear, brake chatter and clutch
slippage. Superior lubricity protects pumps, valve
cylinders and other hydraulic components. Prevents
corrosion of non-ferrous metal parts. Meets or exceeds
John Deere Wear/Corrosion Test, Piston Pump AT 94661
and Flow Degradation tests, and Vickers 35-VQ Vane
Pump. ASTM D-130 Copper Corrosion is 1A.
• 19 liter pails
• UltraLube™ Multi-Purpose Spray
Lubricant and Penetrant
UltraLube works wonders for hundreds of
applications – from industrial requirements in
the workplace to simple uses in and around the
home. Use it to penetrate rusted and sticking
parts, or to lubricate sliding parts, rollers,
chains – almost anything that sticks, squeaks,
binds or needs to slide smoothly.
• Aerosols – 300 ml & 400 ml
• Pump Sprays – 59 ml & 225 ml
• Bulk - 1 l, 4 l, 19 l, 200 l
Comments from Users
Handyman Consumer Focus Group
Sample Quotes
 “I was very surprised at how well it worked. Very low odor. It soaked right in, freed up the parts. I
work on large HVAC systems. We needed to free up a large set of dampers. We sprayed them up,
let sit a short time, then tried to move them. They started to move & we sprayed them again.
They started to move like new. We used a whole can that morning. Very good product.” Donald B.,
Franklin, WI.
 “This lubricant worked great. It penetrated so that my generator worked to its fullest potential,
and it now runs quietly.” Stephen C., Bakersfield, CA.
 “I thought this would just be ‘another lubricant,’ but was I wrong. UltraLube goes to work in the
matter of minutes. I tried UltraLube on my muscle car, a 1965 Chevy II Nova SS, which I was
changing the rear brake lines. I sprayed UltraLube on the nut going in to back plate of the brake
drum & it began to bubble, it was penetrating through the ‘rust’ – 44 years worth. I removed the
nut & lines with ‘no’ trouble. I would recommend this product to everyone, it’s great!” Mike L.,
Pass Christina, MS.
 “I have an old fan said to have ‘permanent’ lubrication. It quit working and I have not found a way
to take it apart to re-lube. This product seems to have brought it back to life better than buying a
new fan! It also worked on some hinges that were getting tight.” David M., Tacoma, WA.
Handyman Consumer Focus Group
Sample Quotes
 “Holds up better than WD-40 and PB-Blaster. Tested under heavy conditions from home to
construction field.” Larry V., Bridgeport, NJ.
 “I’m a retired tool and die maker (43 years with GM) also an avid hunter and fisherman. I used
your product on all my precision tools, guns, bows, fishing equipment. Really slick, scent free,
environmentally friendly.” Richard S., Highland, MI.
 “UltraLube solved any lubricant problem, from pipe cutter to the wheels of a gangbox. It also
helped to remove bolts from an old steam valve! You can imagine how dry those bolts were!!!”
Salvatore A., Prospect, CT.
 “I started out using it to oil my truck hinges and bow cam axles. My buddy snapped it up & I
haven’t seen it since, but he has freed up rusty parts, lubed his kids’ bikes & car hinges. It’s
working great!” Joe P., National City, MI.
 “One feature is if sprayed on your skin it can be washed off with soap and water unlike WD-40. It
also does not have an offensive smell like WD-40. I sprayed the axles & wheels of my push turn
mower. I was amazed, it handled like a self-propelled mower. I also tried them on some stubborn
wood clamps & they ended up turning with one finger.” Jesse S., Sparta, TN.
Details
Details
 Safety Data Sheets (SDS – REACH Documents)
o Go to www.plews-edelmann.com
 Tech Data Sheets (TDS)
o Contact Product Manager, listed below.
 Product Images
o Go to www.plews-edelmann.com/imagestore
 Product Manager
o Dave Babics 815-285-9444 or dbabics@plews.com
 Web Site
o Go to www.Ultra-Lube.com
 Facebook Page
o Go to www.facebook.com/UltraLube