DTI 450
45°
90°
90°
45°
Double mitre cutting-off machine
ENG
Double mitre cutting-off machine with automatic right head movable by a numeric
control. Pneumatic tilting of both heads external cuts 90°, 45°. Sawblade diam. 450 mm
available with maximum cutting length of 4 and 5 meters.
Vertical plane support
Technical features:
•N. 2 saw blades diam. 450 mm.
•Pneumatic vertical and horizontal clamps.
•Protection of the blades.
•Movable side profile support roller conveyor.
•Software single cut and step-by-step cuts.
•Control panel LCD 4x20 with numeric membrane keyboard with hotkeys for the
cutting menu.
inch / mm
Y
13.77 / 350
90°
11.81 / 300
45°
7.87 / 200
5.90 / 150
3.93 / 100
1.96 / 50
0
X
0
Horizontal plane support
9.84 / 250
50
100 150 mm
1.96 3.93 5.90 inch
Models
Maximum cutting
Minimum cutting
Dimension
Weight
kW
DTI 450
4000 mm - 158 in
310 mm - 12.2 in
5950x1400x1650 mm - 235x56x65 in
800 kg - 1760 lb
5
DTI 450
5000 mm - 197 in
310 mm - 12.2 in
6950x1400x1650 mm - 274x56x65 in
900 kg - 1980 lb
5
Options: Movable console; Chips conveyor plate.
The specifications and illustrations in this catalogue are only a guide, ITALMAC S.r.l. therefore reserves the right to make any modifications it deems necessary for technical or commercial reasons.
ITALMAC S.r.l.
ITALMAC USA INC.
Viale del Lavoro, 1
37055 Ronco all’Adige - VERONA, ITALY
Tel. +39 045 7000123 - Fax +39 045 7000571
3705 William Richardson Dr.
South Bend, IN 46628 USA
Phone +1 (574) 243-0217 - Toll Free +1 (855) 843-6001
info@italmac.it - www.italmac.it
info@italmac-usa.com - www.italmac-usa.com
Version 07/2014
DTI 450 cutting diagram