Page 1(3)
GYLT
Magnetostrictive cylinder sensor 10-3000mm
The GY-series from Regal Components offer sensors
that meet the highest demands on the market from
one of the leading suppliers in Japan. Decades of
experience ensures you highest quality. The GYseries are designed for mount in hydraulic and
pneumatic cylinders but can also be used in other
applications such as liquid level detection. The
magnetostrictive principle, non-contact, offers very
high performance and linearity combined with extreme
long lifetime.
The GYLT sensor is easy to mount and install in cylinders. It
offer you strokes up to 3000 mm and current output, 4-20 mA.
Other models offer up to 7500 mm and other outputs
(analogue or digital).
Regal Components offers you the best available support and
knowledge in position sensing, with more than 20 years of
experience. Regal Components, your choice in position
sensing.
Connection
M12-pin
1
2
3
4
Skärm
Standard
colour
Brown
White
Blue
Black
Function
Function when
built in cylinder*
The GYLT can also be used as an level sensors. Please look
here for more details: http://www.regal.se/products/gy-float
24 VDC
24 VDC
0V
No connect
Utsignal
0V
COM (0 V)
Output
Ansluten till chassi
* If GYLT is build in a cylinder the cylinder connector should be connected in this way.
Please contact Regal for more information
Order information GYLT
Electrical specifications
Supply voltage ................................................... 24 VDC ±2V 0,05A
Linearity ................................................................................ ±0,025% FS
Resolution ............................................................................... <0,01% FS
Repeatability ..................................................................... < ±0,01% FS
Temperature drift .................................................... <40 ppm FS/°C
Frequency response ...........................................1 kHz / 1 ms (std)
Output signal ................................................. 4-20 mA (load <500Ω)
Mechanical specifications
Stroke length ................................................................... 10-3000 mm
Temperature ............... operating ........................... -20°C- +80°C
.................................................... storage ........................... -40°C- +80°C
Material ........................probe head .................................. Aluminium
............................................... probe rod .............. Stainless steel SS304
Vibration .........................................................6G (or 40 Hz 2 mmp-p)
Shock ......................................................................................... 50G (2 ms)
Protection class ............................................ IP 67 (10 kPa, 30 min)
Working pressure ...................................max 350 bar (5000 psi)
GYLT
2= Stroke (mm), max 3000
3= Output
A:
0-10 V
B:
4-20mA
C:
0-5 V
4= Output direction
D:
Forward
R:
Reversed
5= Thread
M:
M24x1.0
N:
M18x1.5
U:
3/4-16UN
6= Rod diameter
10:
Ø10 mm (std)
8:
Ø8 mm
14:
Ø13.8 mm
7= Connector CN:
M12 connector
G:
Cable out X meters long
2013-03-13, specifications subject to change without notice
REGAL COMPONENTS AB • LEFFLERSGATAN 1 • SE-754 50 UPPSALA • SWEDEN
+46 (0)18-65 70 00 • WWW.REGAL.SE • INFO@REGAL.SE
- -
- -
-
Page 2(3)
GYLT
Magnetostrictive cylinder sensor 10-3000mm
Ritning
(mm)
Magnets
Example other magnets
Magnet 2PN
Contact us for more information
Suggestions connection
Modell 6191
Modell 6190
Modell 8405, 8410 och 8490
More connectors and cables at: http://www.regal.se/products/connectors-cable
2013-03-13, specifications subject to change without notice
REGAL COMPONENTS AB • LEFFLERSGATAN 1 • SE-754 50 UPPSALA • SWEDEN
+46 (0)18-65 70 00 • WWW.REGAL.SE • INFO@REGAL.SE
GYLT
Page 3(3)
Magnetostrictive cylinder sensor 10-3000mm
The GY-series can be adapted with different magnets depending on the
application. There are two different shapes; cylindrical and U-shaped. All
sensors are delivered with a standard magnet that differs between models. Please
see each datasheet for details.
When a different magnet than standard is needed, please refer to the table
below. Most magnets with a larger inner diameter then the sensor rod will fit,
but please consult us when choosing a special magnet.
2013-03-13, specifications subject to change without notice
REGAL COMPONENTS AB • LEFFLERSGATAN 1 • SE-754 50 UPPSALA • SWEDEN
+46 (0)18-65 70 00 • WWW.REGAL.SE • INFO@REGAL.SE