NS1000 Version 2
Document for SE and Sales Training
KX-NS1000 Version 2
Summary
Rev 1.2D January 10, 2013
Panasonic System Networks
PBX SE team
Specifications and schedule are subject to change without notice.
Table of Contents
No.
1
Feature Improvement
E1/PRI adapter
on SIP trunk of KX-NS1000
2
Stacking card
Document
1. PRI E1 Adapter +
2. Stacking Card xxx.ppt
Click to link
for TDA/TDE/NCP connection
3
KX-NT phone capacity
Page 6 in this PPT
128(V1) to 256(V2) per one NS1000
4
Network survivability
4. Network Survivability
xxx.ppt
Click to link
5
KX-NT5xx phone support
5. NT5xx_QRG.pdf
Click to link
UT based hardware for improved hands-free
NT based software for full PBX features
6
SBC for KX-UT Phone
(See Reference Folder)
7
KX-UDT
(See Reference Folder)
8
Other Improvement
UT based IP System DECT
(See Reference Folder)
2
Introduction
3
1. E1 / PRI Adapter
When customers want to use IP-Phone (*) mainly for extension and they
want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with
new trunk adapter is recommended because KX-NS1000 supports more
IP capacity and IP functionality than KX-NCP or KX-TDE.
(*)
- KX-NT / KX-UT by Panasonic
- NT based software phone by Panasonic
- SIP hardware phone by other maker
- SIP software phone for PC, Android, iPhone and so on
Panasonic
KX-NS8290
PRI30
Trunk Adaptor
SIP Extension
Model
PRI30
Specifications
KX-NS8188X
E1 adapter on SIP trunk
KX-NS8290CE
PRI30 adapter on SIP trunk
KX-NS8290X
PRI23 adapter on SIP trunk
SIP Trunk (30-ch)
PRI Card
KX-NCS0290
IP Network
215 mm (W)
44 mm (H)
200 mm (D)
KX-NT
500g
KX-NS1000
KX-UT
Other
SIP Phone
SIP
Softphone
4
Version 2.03
for TDA/TDE
2. Stacking Card
On the other hand, when customer has Panasonic PBX now, they can
add IP capacity and IP functionality using KX-NS1000 version 2 with
stacking card KX-NS0130 with keeping current PBX.
This configuration is useful for new customer also when
they need more SLT phone, Digital PT with DSS Console,
Analog PT and analog CO as well as IP-Phone. KX-NS0130 SC card for NS100
Before adding KX-NS1000
After adding KX-NS1000
Analog
CO
Analog
CO
KX-TDE
KX-TDE
KX-NS0132
SC card for TDA/TDE
Direct Connection
like TDE600 to TDE620
MPR Card
EXT Card
SC Card
100 % Feature
Transparency
like TDE600
to TDE620
SLT
SC card for NCP
CO Card
CO Card
EXT Card
KX-NS0131
KX-DT w/
DSS Console
Version 2.01 supports both NCP and TDA/TDE.
SLT
KX-DT w/
DSS Console
KX-NS1000
SC Card
KX-NCS0130
IP Network
KX-NT
KX-UT
Other
SIP Phone
SIP
Softphone
5
3. KX-NT Phone Capacity Increase
Total capacity is as follows.
Line
Trunk
Legacy
NS1000
x1
NS1000
x2
NS1000
x3
NS1000
x 4 or more
256
256 x 2
600
256
256 x 2
600
by stacking card or/and “xxx+SLT2” card
IP incl E1/PRI adapter
256
256
SIP
256
256
H.323
48
48 x 2 = 96
640
1000
480 SLT (*1)
512 DPT (*2)
1000
640
1000
UT
640
1000
NT (NS1000 V1)
128
128 x 2
128 x 3
128 x N or 1000
NT (NS1000 V2)
256
256 x 2
256 x 3
1000
Extension
Digital PT / Analog PT / SLT
by stacking card or/and “xxx+SLT2” card
IP
(*1) 24SLT x 10 by TDE620 x 2 for example
(*2) 256 DPT incl DXDP by TDE620 x 2 for example
6
4. Network Survivability
Back-up is available automatically for SIP trunk incl E1 / PRI
adapter, KX-NT/UT IP-phone and one look connection.
PRI/E1 or SIP Provider
Trunk Adaptor
SIP Trunk
KX-NS1000 (2nd)
Back-up Master
One-Look AK
One-Look AK
KX-NS1000 (1st)
Master
KX-NT
KX-UT
KX-NT
Back-up master PBX
works as slave PBX
usually.
But it works as
master PBX after
master PBX stops
working.
KX-UT
PRI/E1 or SIP Provider
Trunk Adaptor
After master PBX stops working,
KX-NS1000
Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000
Master
KX-NT
KX-UT
KX-NT
KX-UT
7
5. KX-NT500
KX-NT500 is supported.
- KX-NT500 hardware is based on KX-UT for improved hands-free
compare to KX-NT3xx
- But software is based on KX-NT3xx for full PBX feature support.
- Quantity of key is increased for full PBX feature support.
- SBC cannot be used because not SIP based.
KX-NT543 : 3-line LCD
KX-NT546 : 6-linie LCD
⑨ Message
⑩ Pause
⑪ Flash
⑫ Redial
⑬ Auto Ans
⑭ Conf
⑮ Transfer
⑯ Auto Dial
⑰ Fwd/DND ⑳ SP-Phone
⑱ Hold
⑲ Cancel
⑳ Intercom
8
6. SBC for KX-UT Phone
SBC is available for KX-UT phone for remote connection.
KX-NS1000 version 1 works SBC for standard SIP protocol only.
Therefore SBC works for 3rd party SIP phone or KX-UT registered as
3rd party SIP phone.
KX-UT registered as 3rd party SIP phone needed AK for SIP phone
(Not AK for KX-UT/NT phone). And it cannot use PBX flexibility key or
PBX speed dial data download.
However KX-UT phone with KX-NS1000 version 2 can work as KX-UT
phone even in remote office as well as KX-UT phone in the office.
HQ
NS1000
IP Network
Remote Office
or Home
SBC
KX-NT
KX-UT
work as UT (V1/V2)
KX-UT work as UT (V2)
KX-UT work as 3rd party SIP Phone (V1)
9
8. Other Improvement - 1
Blind Transfer (Refer) is supported for 3rd party SIP phone.
10 Jan. 2013
TDE/NCP
Transfer
Attended
Screened
Media5
(Media5-fone)
Counter Path
OK
OK
Unattended
Blind
NS1000 Version 2
Ad-hock
Conf.
Unscreened
N/A
N/A
-
Transfer (by REFER method)
Attended
Screened
-
OK
OK
(Bria Android,
V1.1.5.41701)
Counter Path
Blind
Unscreened
n/a
n/a
OK
(No feature)
(No feature)
n/a
OK
OK
OK
OK
(No feature)
OK
N/A
OK
(Bria iPhone,
V2.3.2)
3CX
(Softphone)
Grandstream
(GXP280)
Yealink
(T22P)
Unattended
Ad-hock
Conf.
n/a
(No feature)
OK
N/A
-
-
OK
OK
n/a
n/a
(No feature)
(No feature)
OK
N/A
-
-
OK
OK
OK
OK
OK
N/A
-
-
OK
OK
OK
OK
<Transfer definition>
Attended Transfer: Transfer is completed after announcing the destination party.
Unattended Transfer: Transfer is completed without an announcement. After dialing the destination, while hearing a Ring back tone, the
originator can execute the transfer.
Blind Transfer: Transfer is completed without hearing a Ring back tone. (without operation to initiate 2 nd call with sending INVITE)
10
8. Other Improvement - 2
Web-MC is improved.
- Response speed is faster than version 1.
- Copy feature is added.
11
8. Other Improvement - 3
KX-UT670 can work as KX-UT from version 2.04.
(Not as 3rd party SIP phone)
Version 2.04
12
Thank you !
The END
13