USED MACHINERY - Gebruikte machines en procesapparatuur

advertisement
A. FOETH BV
Harselaarseweg 23
3771 MA BARNEVELD
The Netherlands
Tel.:
0031-342415551
Fax:
0031-342417845
E-mail:
[email protected]
Website: www.foeth.nl
USED MACHINERY
NR. 137 / OKTOBER 2014
GEBRUIKTE MACHINES – GEBRAUCHTE MASCHINEN – MACHINES D’OCCASIONS
A. Foeth BV is one of Europe’s largest dealers of used process equipment with over 100 years of experience.
The equipment mentioned in this paper is just a selection of all the machinery available.
If you cannot find the particular machine you are looking for, please fax or mail us your requirements.
052G258, 1 TUMBLER SCREENING MACHINE,
ALLGAIER, type TSI-143, stainless steel, 3 Decks, Dia.
1400 mm.
068G299, 1 CHAMBER FILTER PRESS, FILOX, type KF
100.070-074.030, PP, 117 m2, 1800 ltr. cake.
052G261, 1 SPIRAL CONVEYOR/DRYER, JOEST, type
WUFS, stainless steel, height 4150 mm, Jckt.
059G267, 1 VIBRO SIEVE, LEHMANN, type VSD, stainless
steel, Dia. 1055 mm, 3,2 kW.
060G265, 1 DOUBLE SHAFT RIBBON BLENDER, KARL
SCHNELL, stainless steel, 2500 ltr., 2x 26,0/39,0 kW.
059G269, 1 DOUBLE SHAFT PADDLE MIXER, type GMS,
stainless steel, 300 ltr., 5,5 kW.
Premises in Barneveld – the Netherlands
with a total area of 32,000 sq.m.
1. Various.
2. Z-blade mixers, change pan mixers,
masticators, conches.
3. Conical, tumbler, plough share mixers,
foam mixers.
4. Ribbon blenders, mixer-granulators.
5. Vacuum processing vessels, screw
conveyors, heat exchangers.
6. Reactors, stirring vessels.
7. Reactors, stirring vessels.
8. Size reduction
9. Sieves, colloid mills.
10. Sand mills, dissolvers, butterfly mixers, three-roll mills.
11. Screw presses, roll-compactors,
scraped surface heat exchangers,
spheronizers.
12. Pressure filters, nutsche filters, filter
presses, belt filters.
13. Centrifuges, rotating vacuum drumfilters, colloid mills.
14. Film evaporators, fluid bed dryers.
15. Tumbler dryers, ovens, tray dryers.
16. Paddle dryers.
17. Coating pans, drum coaters, in-line
reactors.
18. Conical and tumbler dryers, roll
dryers.
19. Extruders, hot- and cold mixers, container mixers.
20. New conical mixers.
You can find us from the A30 exit
Harselaar. Follow direction Harselaar.
WE ARE IN THE MIDDLE OF THE
NETHERLANDS; 45 MIN. (BY CAR)
FROM SCHIPHOL AIRPORT.
A TRAIN LEAVES EVERY 30 MIN.
DIRECTLY FROM THE AIRPORT TO
AMERSFOORT.
Please note
In stock
All listed machinery is in stock and
directly available.
Export
Approx. 75% of our machinery is being
exported worldwide.
Visit
You’re welcome to visit our premises
– opening hours are 8.30-16.30 on the
regular working days.
Workshop
We have our own workshop for machinery to be checked or overhauled.
A. Foeth b.v.
052G259, 1 PIN ROLL
BREAKER, JEHMLICH, stainless steel, Dia. 200x300 mm.
-
058G263, 1 VACUUM
Z-BLADE MIXER, WINKWORTH, type 8Z, stainless
steel, 3-4,5 ltr., Jckt.
Barneveld
The Netherlands
-
067G290, 1 REACTOR,
PFAUDLER, type BE2500,
glass lined, 3472 ltr., Jckt.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
061G279, 1 HIGH SPEED
SHEAR MIXER HOSOKAWA,
type Cyclomix 50, stainless
steel, 50 ltr., 15 kW.
059G275, 1 TURBO MILL,
NETZSCH-CONDUX, type
CUM 150-SP-DNI, stainless
steel.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
2
Z-BLADE MIXERS – KNEADERS
Z-BLADE MIXERS
Partnr.
060F308
067G291
045F188
033G026
086F472
058G263
074F363
079Z305
015F353
030U170
079F435
101A516
115T714
105A476
002B004
038P171
062C287
054F306
012Y114
062R250
124M557
015X120
068Z266
088X452
054Z209
104K359
012Y116
012Y115
012Y113
012Y112
012Y111
001B017
118S459
054A269
033B200
067Y400
Make
WERNER&PFLEIDERER
AMK AACHEN
WINKWORTH LTD
HERMANN LINDEN
LINDEN
WINKWORTH
ERWEKA
WERNER&PFLEIDERER
AMK AACHEN
WERNER&PFLEIDERER
AMK AACHEN
Type
Capacity(Ltr.)
LUK-1 K2 TV
1,0
BAUART III U
1,0
2-Z
1,2
LK-2
2,0
LK II 2
2,0
8Z
4,5
AR-400/LK-5 W
5,0
LUK-6
10,0
VIU-20/IV
20,0
UK-20-K-5
20,0
VI U-20
20,0
20,0
LINDEN
K II N 35
35,0
WINKWORTH
16 Z SS
36,0
AMK AACHEN
II U-40
40,0
LINDEN
K II 35
50,0
LINDEN
K III 60 I
60,0
WERNER&PFLEIDERER UK-80 K4UH
80,0
GUITTARD/RPA
M-54
100,0
MEILI
100,0
BAKER PERKINS
140,0
WERNER&PFLEIDERER
175,0
AMK
VI-U
200,0
WERNER&PFLEIDERER UK-14-X
200,0
200,0
WINKWORTH
29Z SS JKT
235,0
APV CHIMIE
M-40 SL
250,0
APV CHIMIE
M-40 SL
250,0
APV CHIMIE
M-40 SL
250,0
UTV CHEMIE
M-40 SL
250,0
F. AOUSTIN & CIE
M-40 SL
250,0
HERMANN LINDEN
K-IV 300 SP
300,0
WERNER&PFLEIDER
UK 14-VI H
300,0
AMK
II-U
700,0
GUITTARD
POLYMIX M-200 1500,0
BUSS
SR-3000
3000,0
Partnr.
090A440
056F365
033E083
101R435
027U165
002E002
183A603
186K643
164H746
104A505
082Z322
090U632
090U631
043X307
017M048
276D1160
033B201
Make
MICKLE LABORATO
RHEON JAPAN
WERNER&PFLEIDERER
BRABENDER
WERNER&PFLEIDERER
WERNER&PFLEIDERER
LAIM
WERNER&PFLEIDERER
J. BORGONIEN
IKA MASCHINENBAU
WERNER&PFLEIDERER
HERMANN LINDEN
HERMANN LINDEN
WERNER&PFLEIDERER
WERNER&PFLEIDERER
BAKER AND PERKINS
Partnr.
070K204
005S020
063G284
083B501
069C433
208H932
162D588
087T505
243D976
045Y256
064W275
072Y444
045Y257
045Y258
101S392
019G056
052Y337
097F499
037G123
067E417
137H649
064W269
156M594
065A300
017Z060
050Z196
050Z194
084Z416
084Z415
008G052
015C031
008T049
010I041
040T246
083B499
083B500
025E103
020C055
083B498
050Z188
050Z187
050C290
050Z190
118X753
Make
BONNET
VOEGELE
DRAISWERKE
IKA MASCHINENBAU
DALTON CORP. JAPAN
SEGER+CREMER
MOLTENI
LINDEN
MOLTENI
GUSTAV SPANGENBERG
GRIESER & FAULHABER
GUSTAV SPANGENBERG
DIETER WERNER
DIETER WERNER
SUTER
BEAR WODSCHOW
DRAIS
BEAR WODSCHOW
COLLETTE
SPANGENBERG
Type
GRIESER & FAULHABER
E.KOLB.LOHER
ARTOFEX AARAU
MOLTENI MILANO
COLLETTE
COLLETTE
DRAISWERKE
DRAISWERKE
GEA COLLETTE
COLLETTE
COLLETTE
SPANGENBERG
TOPOS
MOLTENI MILANO
MOLTENI ITALY
MOLTENI MILANO
MOLTENI MILANO
DRAIS
COLLETTE
COLLETTE
MIRALLES S.A.
COLLETTE
COLLETTE
VPL-60
Material
Motor(KW)
SS
1,5
1.4571
1,1
SS
0,37
SS
0,25
DSS
0,55
SS
1,1
SS
SS
1.4571
5,5+3,0
MS
10/15
SS
MS
2,0
MS
3,0
SS
NO MOTOR
SS
4,0
BRASS
NO MOTOR
MS
5,5
1.4571
NO MOTOR
MS
15,0
MS
NO MOTOR
MS
7,5
MS
7,4/10,0
MS/CERAMI 11,0+7,5
SS
5,5
SS
7,5
SS
7,5
MS
45,0
MS
45,0
MS
45,0
MS
45,0
MS
45,0
1.4571
16/24
SS
75,0
SS
11,0
MS
75,0
SS
110,0
067G291, 1 Z-BLADE MIXER,
AMK, type III U, stainless steel,
1 ltr., Jckt., 1,1 kW.
060F308, 1 VACUUM Z-BLADE
MIXER, WERNER AND
PFLEIDERER, type LUK-1 K2
TV, stainless steel, 1 ltr., Jckt.,
1,5 kW.
045F188, 1 Z-BLADE MIXER,
WINKWORTH, type 2-Z, stainless steel, 1,2 ltr., Jckt.
003G026, 1 Z-BLADE MIXER,
LINDEN, type LK-2, stainless
steel, 2 ltr., Jckt., 0,25 kW.
058G263, 1 VACUUM Z-BLADE
MIXER, WINKWORTH, type 8Z,
stainless steel, 3,0-4,5 ltr., Jckt.,
1,1 kW.
002E002, 1 DOUBLE SHAFT
KNEADER, WERNER AND
PFLEIDERER, type LUK 8,0 K3,
stainless steel, 8 ltr., vacuum,
Jckt., 4,8/6,0 kW.
015F353, 1 MIXTRUDER, AMK,
type VIU-20/IV, stainless steel,
32 ltr., Jckt., 5,5 kW., screw discharge.
115T714, 1 Z-BLADE MIXER,
LINDEN, type KII N35, mild
steel, 48 ltr., 3 kW.
002B004, 1 Z-BLADE MIXER,
AMK, type II U-40, stainless
steel, 40 ltr., Jckt., 4 kW.
104A505, 1 HEAVY DUTY
KNEADER, IKA, type HKD-50/
VHVX, stainless steel, 50 ltr.,
Vacuum Jckt., screw discharge.
054F306, 1 VACUUM Z-BLADE
MIXER, WERNER AND
PFLEIDERER, type UK-80 K4UH,
stainless steel, 170 ltr., Jckt.
066X406, 1 Z-BLADE MIXER,
AMK, type II U-110, stainless
steel, 110 ltr., Jckt., 7,5 kW.
001B017, 1 Z-BLADE MIXER,
LINDEN, type K-IV 300 SP,
stainless steel, 300 ltr., Jckt.
054A269, 1 Z-BLADE MIXER,
stainless steel, 700 ltr., Jckt.,
11 kW, make AMK.
043X307, 1 DOUBLE SHAFT
KNEADER, WERNER AND
PFLEIDERER, type UK19, stainless steel, 2250 ltr., Jckt.
067Y400, 1 Z-BLADE MIXER,
BUSS, type SR-3000, stainless
steel, 3090 ltr., Jckt., 110 kW.
MISCELLENEOUS KNEADERS
Type
Capacity(Ltr.)
207-SD
813301
LUK 8.0 K3
R6
LDUK 6 -IINS
HKD-50
UK-14 X/AU
K-IV-S 2000 SP
K-IV-S 2000 SP
UK-19 VI H SU
UK-19 VIH SUI
0,5
0,5
1,0
8,0
12,0
18,0
30,0
50,0
200,0
2000,0
2000,0
2250,0
2250,0
2500,0
3000,0
Material
SS
SS
SS
MS
SS
SS
MS
SS
1.4571
MS
SS
SS
1.4571
MS
MS
MS
Motor(KW)
2,2
1,6/2,2
2,3/3,7
4,8/6,0
1,5
7,5
0,55
11,0+7,5
30,0+17,5
200,0
200,0
110,0
75,0
75,0
132,0
PLANETARY CHANGE PAN MIXERS
Capacity(Ltr.)
PD 150
FH 1,5 S
HKV5-VHVX-VE
5-DMV
1.5
LPM-5
1.5
VM-8
VPL-8
VM-8
VM-8
VM-8
PRH-25
Varimixer RN-30
FH-30
Varimixer R-40
MP-45
SNM 50
RG-102
I-150 SV
MPH-150
MPH-150
FH-3
FH-3
MPH-300
MPH-300
SKH/SM-300
VM320
PH-500 S.V
PH-500 S.V
I-700 S.V
PH-900 SV
FH-800 S
MPH-900
MPH-900
MPHDH-1000
MPH-1500
MPH-1500
1,6
2,5
3,0
5,0
5,0
5,0
5,0
8,0
8,0
8,0
8,0
8,0
25,0
30,0
30,0
40,0
45,0
50,0
60,0
60,0
80,0
100,0
150,0
150,0
150,0
165,0
165,0
300,0
300,0
300,0
320,0
350,0
500,0
500,0
700,0
750,0
900,0
900,0
1000,0
1500,0
1500,0
Material
MS
SS/Coated
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS/ALUM
SS
SS
SS
SS
SS
SS
SS
SS
SS
304
SS
MS
SS
SS
SS
MS
SS
SS
SS
SS
SS
SS
SS
Motor(KW)
0,37 KW
7,5/9,0
0,25
0,37/0,22
0,55
0,75
0,6
0,55
0,75
0,30/0,37
0,55
0,55
1,8
1,0
2,2
1,1
1,1
3,6
1,5
4,0
MOTOR
5,5
4,0
4,0
5,5
5,5
± 3,7
11,0
9/11,0
22,0
22,0
22,0/27,0
30,0
18,5
18,5
2x 37,0
18,5
15,0
PLANETARY MIXERS
063G284, 1 VACUUM
PLANETARY MIXER,
DRAIS, type FH 1,5S,
1,5 ltr., Jckt., 0,25 kW.
069C433, 1 VACUUM
PLANETARY MIXER, DALTON, 3 ltr., Jckt., electric
heating.
064W269, 1 PLANETARY
CHANGE PAN MIXER, GRIESER
UND FAULHABER, type VPL-60,
stainless steel, 60 ltr., Jckt.
008G052, 1 PLANETARY
MIXER, COLLETTE, type
MPH-300, stainless steel,
300 tr., 5,5 kW.
087T505, 1 VACUUM
PLANETARY MIXER,
LINDEN, type LPM-5,
stainless steel, 5 ltr.
156M594, 1 PLANETARY
MIXER, KOLB LOHER, stainless
steel, 80 ltr.
083B499, 1 VACUUM
PLANETARY MIXER,
MOLTENI, type PH-500
SV, stainless steel, 500 ltr.,
Jckt., 22 kW.
A. Foeth b.v.
-
019G056, 1 PLANETARY
MIXER, WODSCHOW, type
Bear RN-30, stainless steel,
30 ltr., 1 kW.
065A300, 1 PLANETARY
CHANGE PAN MIXER, ARTOFEX, type RG-102, stainless
steel, 100 ltr.
025E103, 1 VACUUM PLANETARY MIXER, MOLTENI,
type I700, stainless steel,
700 ltr.
Barneveld
The Netherlands
-
052Y337, 1 VACUUM
PLANETARY MIXER
DRAIS, type FH-30, stainless steel, 30 ltr., Jckt.
050Z194, 1 PLANETARY
CHANGE PAN MIXER, COLLETTE, type MPH-150, stainless
steel, 150 ltr., 4 kW.
020C055, 1 VACUUM
PLANETARY MIXER,
MOLTENI, type PH-900 SV,
stainless steel, 750 ltr., Jckt.
017Z060, 1 VACUUM
PLANETARY MIXER MOLTENI,
type I-150SV, stainless steel,
150 ltr., 5,5 kW.
050Z188, 1 PLANETARY
MIXER, COLLETTE, type
MPH-900, stainless steel,
900 ltr., 18,5 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
097F499, 1 PLANETARY
MIXER, WODSCHOW, type
Bear Varimixer R-40, stainless steel, 40 ltr., 1,1 kW.
037G123, 1 PLANETARY
MIXER, COLLETTE, type
MP-45, stainless steel,
45 ltr., 1,1 kW.
040T246, 6 PLANETARY
CHANGE PAN MIXERS,
TOPOS, stainless steel, 300 ltr.,
9,0/11,0 kW.
067C290, 1 PLANETARY
CHANGE PAN MIXER,
TALLERES MIRALLES,
type MPHDH-1000, stainless
steel, 1000 ltr., + dissolver
stirrer
050Z190, 1 PLANETARY
MIXER, COLLETTE, type
MPH-1500, stainless steel,
1500 ltr., 18,5 kW.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
3
CONICAL MIXERS
Partnr.
031A157
031A158
082F444
000R122
117I362
080F504
000K379
000K289
062I196
069B392
000K184
000K394
069B391
000N555
000K314
073B405
065C358
065C359
016F158
030S190
Make
NAUTAMIX HAARLEM
NAUTAMIX HAARLEM
HOSOKAWA NAUTA
VRIECO
HOSOKAWA MICRON
HOSOKAWA NAUTA
NAUTAMIX HAARLEM
NAUTAMIX HAARLEM
HOSOKAWA MICRON
NAUTAMIX HAARLEM
NAUTAMIX HAARLEM
HOSOKAWA MICRON
KRAUSS MAFFEI
CONICAL MIXERS
Type
Capacity(Ltr.)
20,0
40,0
DBYU-50 R
50,0
HV-50
50,0
0,6 VB-1
60,0
DBXE-200 R
200,0
HV-300
300,0
HV-600
600,0
600,0
DBXU-900 R
900,0
HV-1000
1000,0
HV-1500
1500,0
MBXU-15 RW
1500,0
HV-2000
2000,0
HV-3000
3000,0
80 RB-4
8000,0
MBX-100 S
10.000,0
MBX-100 S
10.000,0
100 RV-4
10.000,0
TITUS MIXER
37.500,0
Material
316
316
1.4401
SS
MS
1.4301
SS
SS
SS 316
1.4401
SS
SS
1.4301
SS
SS
304
MS
MS
304
SS
Motor(KW)
0,55
0,75
0,75
0,75
1,5/0,55
2,2+0,18
3,0
3,0
4,0/0,37
3,0+0,37
4,0
11,0+0,55
5,5
1,3+14,5
15,0+1,5
15,0+1,5
11,0+1,1
22,0
TUMBLER MIXERS
Partnr.
041F172
070F349
144P678
040F267
067G289
063F288
021F065
021F066
072E301
021F064
069C299
121M545
038R378
021F068
021F069
040F268
041B216
025Y184
088B537
036S123
001W017
029F132
029F131
057Z223
063E235
047B233
024B115
163N782
048A252
039G144
071U565
077F383
004Y028
Make
Partnr.
065E270
047F222
041G194
065E269
063G294
069C298
063C288
061G279
080B564
063F289
063C287
001A027
063C289
001A025
156I485
184H882
120Z486
035F149
066B365
058F282
060P266
020Y106
056C247
117Z457
098W483
028B147
165M611
026T148
077U536
063A305
041B215
142S653
071Z339
111S461
097X499
063S240
058B358
020Y107
030E106
086A461
026W131
061Y353
056X461
085C409
003C006
083K285
038Y375
008U041
060R288
064E231
110Y776
017X077
051A285
062B445
020Y108
020Y109
072Y445
087U562
104W505
110Y774
084Y579
104W504
012S030
039G145
017C108
024W116
084A392
014U059
142P670
079W358
062X389
049G201
016A187
016A188
016A185
026Z150
016A186
Make
LÖDIGE
LÖDIGE
LOEDIGE
LÖDIGE
LOEDIGE
LÖDIGE PADERBORN
HOSOKAWA MICRON
HOSOKAWA MICRON
LÖDIGE PADERBORN
LÖDIGE
HOSOKAWA MICRON
DRAIS MANNHEIM
HOSOKAWA MICRON
DRAIS MANNHEIM
DRAIS
DRAIS
LÖDIGE-MORTON
LÖDIGE
LÖDIGE
LÖDIGE
SA-ET
DRAIS MANNHEIM
SCHEPENS
DRAIS
DRAIS
LÖDIGE PADERBORN
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
SEGLER GMBH BERGE
LÖDIGE
FAIRFIELD DALTON LTD
LÖDIGE-MORTON
LÖDIGE
LÖDIGE
LÖDIGE PADERBORN
DRAIS MANNHEIM
KEK-GARDNER
DRAIS MANNHEIM
DRAIS
LÖDIGE
LÖDIGE
LOEDIGE
LÖDIGE
LOEDIGE
LÖDIGE
MINOX
MORTON
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE PADERBORN
DRAIS MANNHEIM
DRAIS MANNHEIM
DRAIS
DRAIS
MORTON MACHINES
DRAIS
DRAIS MANNHEIM
MORTON MACHINES
SGM
LOEDIGE
ZYKLOS GMBH
DRAIS
DRAIS
HAAGEN & RINAU
LÖDIGE
MTI MISCHTECHNIK
MTI
LOEDIGE GMBH
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
LÖDIGE
ENGELSMANN
NIRO ATOMIZER
FUCHS
WAB BACHOFEN
TELSCHIG GMBH
WAB BACHODEN
WAB BACHODEN
GEA GALLAY LTD.
WAB BACHODEN
PATTERSON + KELLEY
JONES
PATTERSON-KELLEY
WAB BACHOFEN
WAB BACHODEN
ENGELSMANN AG
SEGLER GMBH BERGE
ROBERT BOSCH
PAUL O. ABBÉ
GLADIATOR
Type
Capacity(Ltr.)
20”CLS ZZ+LB+P
FA-72
T-2-C
RSM6/60
Turbula T-10B
Turbula T-10B
2,0
8,0
10,0
10,0
10,0
Turbula T-10B
10,0
BLENDMASTER
15,0
DY 25
35,0
45,0
Turbula T-50A
50,0
Turbula T-50A
50,0
ELTE-650
50,0
FREIFALLMISCHER 100,0
250,0
RVB-10
275,0
MY 7/4743
300,0
300,0
ENGELSMANN
CDM
350,0
ENGELSMANN
CDM
350,0
GMV CASTELLARANO
500,0
WAB BACHOFEN
Turbula T-500 C
500,0
SCHEPENS
BICONE-500 L
500,0
SERVOLIFT/SCHOLL
NG-1200
800,0
950,0
SEEBECKWERFT WESER TM 10 S
1000,0
LINDOR
Lindor-1000
1000,0
1200,0
LINDOR PRODUCTS
Lindor 1500
1500,0
EBERHARD HOESCH
DKM-3150
14.000,0
Material
MS
MS
SS
SS
SS
SS
PLASTIC
SS
SS
MS
SS
SS
304
316
SS
1.4541
1.4541
304
316
304
1.4301
304
1.4541
316
316
SS
1.4571
Motor(KW)
0,37
1,1
7,5/8,6
0,37
180 Watt
0,25
0,37
0,37
230 VOLT
0,37
MOTOR
0,75+3,6
1,1+0,25
1,1+0,25
0,37
4,0
3,0
7,5
1,5
2,2
2,2
4,0
7,5
15,0+22,0
HYDR.DRIV
1,0/1,4
1,1/6,6
2,2
0,37
2,2
90,0
031A157, 1 CONICAL MIXER,
NAUTAMIX, stainless steel,
20 ltr., 0,55 kW.
031A158, 1 CONICAL MIXER,
NAUTAMIX, stainless steel,
50 ltr., 0,75 kW.
082F444, 1 CONICAL MIXER,
HOSOKAWA NAUTA, type
DBYU-50R, stainless steel,
50 ltr., 0,75 kW.
080F504, 1 CONICAL MIXER,
HOSOKAWA MICRON, type
DBXE-200R, stainless steel,
200 ltr., 2,2 kW + 0,18 kW.
069B392, 1 CONICAL MIXER,
NAUTA, type DBX4-90012,
stainless steel, 900 ltr., 3 kW +
0,37 kW.
073B405, 1 CONICAL MIXER,
HOSOKAWA, type 80 RB-4,
stainless steel, 8000 ltr.,
10,0/14,5 kW + 0,66/1,3 kW.
016F158, 1 CONICAL MIXER,
HOSOKAWA MICRON, type 100
RV-4, stainless steel, 10.000 ltr.,
11 kW+1,1 kW.
065C359 + 065C358, 2 CONICAL MIXERS, NAUTAMIX, type
MBX 100S, mild stel, 10.000 ltr.,
15 kW + 1,5 kW.
POWDER TURBO MIXERS
LOEDIGE/POWDER TURBO MIXERS
Type
Capacity(Ltr.)
M5 R
5,0
M5 G.REI
5,0
M-5 R
5,0
M5
5,0
M-20 MK
20,0
M-20
20,0
CYCLOMIX 50
50,0
Cyclomix 50
50,0
FM-50/1MZ
50,0
FM-50/1 MZ
50,0
CYCLOMIX 50
50,0
T-50 FM2
50,0
CYCLOMIX 50
50,0
T-100
100,0
T0
100,0
HT 100 A
100,0
FM-130D
130,0
FM-130 D
130,0
FM-130D
130,0
FM-130/1Z
130,0
T-160
160,0
TURBUMIX TM-200 200,0
Schoepenmenger 200,0
HT-250
250,0
HT-2
250,0
KM-300D
300,0
FKM-300D REI
300,0
FKM-300 D1Z
300,0
FM-300D
300,0
FM-300D
300,0
SD-600
300,0
FM-300D
300,0
300,0
FKM-300
300,0
300,0
KM-600D
300,0
FKM-300D
300,0
TURBUMIX TM-400 400,0
400 E
400,0
T-400 FM II
400,0
KT-400
400,0
FKM-600D
600,0
FKM-600
600,0
FKM-600 D
600,0
FKM-600D/2Z
600,0
FKM 600DA
600,0
FKM-600D
600,0
PSM-600 D-1 MZ 600,0
FKM-600 D
600,0
FKM-600D 2MZ
600,0
FKM-600D/2MZ
600,0
FKM-600D 2Z
600,0
FKM-600D
600,0
FKM-600 D
600,0
TURBUMIX TM-630 630,0
TURBUMIX TM-630 630,0
T-630
630,0
T-630
630,0
FKM-900D
900,0
T-1000 FM IIA
1000,0
HT-1000
1000,0
FKM-1200D
1200,0
WSM
1200,0
FKM-1200D
1200,0
ZB-1500/1000
1500,0
TC-1600
1600,0
T-2000 FMI
2000,0
HSM-2500V
2500,0
FKM-3000D
3000,0
H-3300 PH
3300,0
K-3500
3500,0
KM-4200D
4200,0
FKM-15000D/12ZF15000,0
FKM-15000D/12ZF15000,0
FKM-15000D/12ZF15000,0
FKM-15000D-12ZF15000,0
FKM-15000D/12ZF15000,0
Material
SS
SS
SS
SS
1.4571
SS
1.4404
SS
1.4571
SS
1.4404
SS
1.4404
SS
MS
MS
1.4541
SS
SS
SS
MS
1.4541
SS
SS
SS
SS
MS
1.4541
SS
SS
MS
1.4571
SS
SS
SS
SS
1.4541
1.4541
SS
SS
SS
SS
SS
1.4541
SS
MS
1.4541
SS
SS
SS
SS
MS
SS
1.4541
1.4541
1.4541
MS
SS
316
1.4541
1.4541
304
SS
SS
MS
1.4571
MS
1.4571
MS
1.4541
SS
SS
1.4571
1.4571
1.4571
1.4571
1.4571
Motor(KW)
0,75
0,37
0,75
0,75
1,5+1,0
1,5
30,0
15,0
2,2
30,0
4,0
30,0
5,0
3,0
9,0
3,0+4,0
DC motor
4,0
5,5
7,5
56,5
18,5
22,0
13,2
5,5
15,0
5,5
11,0/18,0
3,0
11/18,0
7,5+4,0
7,5
7,5
5,5
11,0
8,2/11,0
11,0+4,0
22,0
11,0
11,0
11,0
15,0
5,5
13,5
11,0
15,0
18,5
11,0
18,5
NO MOTOR
11,0
11,0
12,0/18,0
12,0/18,0
16,0/24,0
7,5
75,0
56,0/82,0
90,0+37,0
30,0
45,0
22,0
18,5+15,0
50,0
55,0+5,5
22,0
NO MOTOR
45,0
37,0
55,0
120/145
120/145
120/145
NO MOTOR
120/145
047F222, 1 LOEDIGE MIXER,
type M5 G.REI, stainless steel,
5 ltr., 0,37 kW.
063G294, 1 LOEDIGE MIXER,
type M-20 MK, stainless steel,
20 ltr., Jckt. + chopper.
080B564, 1 LOEDIGE MIXER,
type FM-50/1 mz, stainless steel,
50 ltr., + Jckt. + chopper.
063F289, 1 LOEDIGE MIXER,
type FM50/1 MZ, stainless steel,
50 ltr., + chopper.
035F149, 1 LOEDIGE MIXER,
type FM130 D, stainless steel,
130 ltr., Jckt., + chopper.
097X499, 1 LOEDIGE MIXER,
stainless steel, 300 ltr., 7,5 kW.
030E106, 1 POWDER TURBO
MIXER, KEK GARDNER, type
400E, stainless steel, 400 ltr.,
11 kW., + chopper.
020Y107, 1 POWDER TURBO
MIXER, DRAIS, type TM-400E,
FM1, stainless steel, 400 ltr.,
8,2/11 kW, + chopper.
056X461, 1 LOEDIGE MIXER,
type FKM-600, stainless steel,
600 ltr., 11 kW, 2 choppers,
nozzles for liquid injection.
085C409, 1 LOEDIGE MIXER
WITH JACKETED SHAFT, type
FKM-600 D, stai15 nless steel,
600 ltr., Jckt., kW.
049G201, 1 LOEDIGE MIXER,
type KM-4200, stainless steel,
4200 ltr., Jckt., continuous,
5,5 kW.
016A187, 1 LOEDIGE MIXER,
type FKM 15000D/12ZF,
stainless steel, 15.000 ltr.,
120/145 kW.
TUMBLER MIXERS
067G289, 1 SHAKER MIXER,
WAB, type T-2-C, 0,18 kW.
021F069, 1 SHAKER MIXER,
WAB, type Turbula 10B,
0,37 kW.
021F064, 1 SHAKER MIXER,
WAB, type Turbula T50 A,
1,1 kW.
088B537, 1 V-TYPE TUMBLER
MIXER, ABBÉ, type RVB-10,
stainless steel, 500 ltr., 7,5 kW.
029F131, 1 CONTAINER MIXER WITH 8 CONTAINERS, ENGELSMANN, type CDM, stainless steel, with coating, 350 ltr.
069C299, 1 V-TYPE TUMBLER
MIXER, PATTERSON + KELLEY, type Blendmaster, 15 ltr., +
intensifier bar.
039G144, 1 TUMBLER MIXER,
LINDOR, type 1000, stainless
steel, 1000 ltr., 2,2 kW.
A. Foeth b.v.
-
041B216, 1 CONTAINER
MIXER, SEGLER, type
FR-100L, stainless steel,
100 ltr., 4 kW
Barneveld
The Netherlands
-
001W017, 1 SPRAY
TUMBLER MIXER, stainless steel, 300 ltr., with
liquid injection.
024B115, 1 TUMBLER
MIXER, SANDOZ SCHOLL,
type NG1200, stainless
steel, 1200 ltr., 7,5 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
163N782, 1 V-TYPE
TUMBLER MIXER, material stainless steel, 950
ltr., with liquid injection
and chopper.
077F383, 1 TUMLER
MIXER, LINDOR, type
1500-R-CR41, stainless
steel, 1500 ltr., 2,2 kW.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
4
UNIVERSAL MIXERS AND GRANULATORS
UNIVERSAL MIXERS/GRANULATORS
Partnr.
Make
Type
Capacity(Ltr.)
064F333 ZANCHETTA
Rotolab
2,0
042W187 HENSCHEL
HU/G-15
15,0
026G106 GUEEDU FRANCE
Type 12
18,5
042W186 HENSCHEL
HU/G-30
30,0
040B264 ZANCHETTA SRL LUCCA ROTO P-50
50,0
050F240 AEROMATIC FIELD
GP-65
65,0
113Z468 GUEDU
90 NO/PO
90,0
095B566 ZANCHETTA
ROTO MIX 120
120,0
098A536 LÖDIGE
MGT-125P
125,0
100Z418 LÖDIGE PADERBORN
MGT-125 P
125,0
050F239 AEROMATIC FIELD
GP-150
150,0
084T495 COLLETTE
GRAL-150
150,0
004Y082 ZANCHETTA
ROTO 200P
200,0
013B033 COLLETTE
GRAL-300
300,0
079A399 COLLETTE
GRAL-300
300,0
095B567 ZANCHETTA SRL ITALY ROTO-300P
300,0
098A526 RPA AOUSTIN PROCESS NOVAMIX 400
400,0
035F152 COLETTE
GRAL-600 PRO
400,0
050Z191 COLLETTE
GRAL-600
600,0
081A493 COLLETTE
GRAL-600
600,0
062A304 COLLETTE
GRAL-600
600,0
049Z225 COLLETTE
GRAL-600
600,0
027Z121 COLLETTE
GRAL-1200
1200,0
085N421 GUEDU
1600 LE/PO
1600,0
107T743 THYSSEN HENSCHEL
HU/G 1750
1750,0
086B542 HENSCHEL
HU/G-2300
2300,0
086S374 FUKAE POWTEC
FS-GC-1200J
2400,0
188MN157THYSSEN-HENSCHEL
HU/G 5000
5000,0
050F240, 1 VACUUM UNIVERSAL MIXER, AEROMATIC
FIELDER, type GP65, stainless
steel, 65 ltr., Jckt., 7,5 kW, +
chopper.
Material
SS
SS
316L
SS
SS
316L
316
SS
1.4541
SS
316L
SS
SS
SS
SS
SS
1.4404
1.4404
SS
SS
316
316
SS
SS
1.4541
1.4541
SS
SS
Motor(KW)
1,1+0,5
1,1
1,5+0,8
DC Motor
5,5
HYDR.DRIV
4,5/6,2
DC Motor
7,5/11,0
HYDR DRIV
14,5+4,5
12,5+5,5
HYDR DRIV
30,0
30,0
37,0
36,0
36,0+5,5
37,0
55,0
20,0
60/90
64,0/90,0
55,0
63,0/85,0
035F152, 1 GRAL GRANULATOR/VACUUM DRYER,
COLLETTE, type Gral 600 Pro,
stainless steel, 600 ltr., + chopper.
064F333, 1 UNIVERSAL MIXER,
ZANCHETTA, type Rotolab, stainless steel, 2 ltr., vacuum, Jckt.,
+ chopper.
029G106, 1 VACUUM UNIVERSAL MIXER/DRYER, GUEDU,
type 12, stainless steel, 18,5 ltr.,
Jckt.
113Z468, 1 UNIVERSAL
MIXER/DRYER, GUEDU, type
90 NO/PO, stainless steel, 90 ltr.,
vacuum, Jckt + chopper.
100Z418, 1 UNIVERSAL MIXER,
LOEDIGE, type MGT-125P,
stainless steel, 125 ltr., + chopper.
050F239, 1 VACUUM UNIVERSAL MIXER, AEROMATIC
FIELDER, type GP150, stainless
steel, 150 ltr., Jckt., 11 kW, +
chopper.
027Z121, GRAL GRANULATOR,
COLLETTE, type gral 1200,
stainless steel, 1200 ltr., + chopper.
086B542, 1 UNIVERSAL
MIXER, HENSCHEL, type
HU/G-2300, stainless steel,
2300 ltr., 64/90 kW, + chopper.
188MN157, 1 UNIVERSAL
MIXER, THYSSEN HENSCHEL,
type HU/G5000, stainless steel,
5000 ltr.
PADDLE MIXERS
OFFER US
YOUR SURPLUS EQUIPMENT
PADDLE MIXERS
017C108, 1 INTENSE
MIXER, ZYKLOS,
type ZB1500/1000,
mild steel, 1500 ltr.,
15 kW+18,5 kW +
7,5 kW.
171M709, 1 TRUNCATED CONE
MIXER, ALPINE,
type KM20, stainless
steel, 2000 ltr., 24 kW.
012G041,
1 RUBERG MIXER,
type HM 400, stainless steel, 400 ltr.,
+ chopper.
010B067, 1 DOUBLE SHAFT
PADDLE MIXER, FORBERG,
type F120S, stainless steel,
120 ltr., 1,9 kW.
079F431, 1 DOUBLE SHAFT
PADDLE MIXER, TATHAM, type
WT-400 LTR, stainless steel,
400 ltr., 5,5 kW.
059G269, 1 DOUBLE SHAFT
PADDLE MIXER, GERICKE,
type GMS-300, stainless steel,
300 ltr., 5,5 kW.
034G138, 1 DOUBLE SHAFT
PADDLE MIXER, GERICKE,
type GMS-600, stainless steel,
600 ltr., 7,5 kW.
Partnr.
049A274
016A150
113X585
064Y421
010B067
059G269
079F430
079F431
034G138
045R150
053P249
096Z370
093B570
078H352
Make
ENGELSMANN
Type
Capacity(Ltr.)
WSM 250X2P
VOMM MILANO
VAN BEEK
FORBERG CANADA
GERICKE
TATHAM/FORBERG
TATHAM/FORBERG
GERICKE
AVA-HUEB GMBH
AVA-HUEB GMBH
VELATI MILANO
HALVOR FORBERG A/S
TMR1
TR-200
F-120 S
GMS-300
WT-400 LT MIX
WT-400 LT MIX
GMS-600
HRM 600
HRM 600
F-1500
120,0
300,0
400,0
400,0
600,0
700,0
700,0
1000,0
1500,0
18000,0
Material
1.4541
SS
316
SS
SS
1.4571
SS
SS
1.4541
SS
SS
SS
MS
SS/MS
Motor(KW)
5,5
NO MOTOR
2,2+1,5
2,0+0,55
5,5
5,5
5,5
7,5
55,0
55,0
37,0
2x 30,0
FOAM MIXERS
115Z441, 1 FOAM MIXER,
MONDOMIX, stainless steel,
Jckt.
097A495, 1 FOAM MIXER,
MONDOMIX, type G-75, stainless steel, Jckt, 18,5 kW.
093B570, 1 FLUIDISED
ZONE MIXER, FORBERG,
type F-1500+FDB, mild steel,
1500 ltr., 37 kW.
096Z370, 1 DOUBLE SHAFT
PADDLE MIXER, VELATI, stainless steel, 1000 ltr., with lifting
device.
RIBBON BLENDERS
043F217, 1 RIBBON BLENDER,
KEMUTEC GARDNER, stainless
steel, 5 ltr.
026A131, 1 VACUUM RIBBON
BLENDER, AMBLES, double
shaft, stainless steel, 100 ltr.,
Jckt.
070U519, 1 RIBBON BLENDER,
ENGELSMANN, type KMM-500,
stainless steel, 500 ltr., + chopper.
061G279, HIGH SPEED SHEAR
MIXER, HOSOKAWA, type
Cyclomix 50, stainless steel, 50
ltr., 15 kW.
063C287
063C288
3 INTENSIVE HIGH SPEED SHEAR MIXERS, HOSOKAWA
MICRON, type Cyclomix 50, stainless steel, 50 ltr., Jckt., 30 kW.
RIBBON BLENDERS
032W094, 1 RIBBON BLENDER, SPANGENBERG, type
TMA-500, stainless steel, 500 ltr.,
Jckt., 15,5 kW.
060G265, 1 DOUBLE SHAFT
RIBBON BLENDER, KARL
SCHNELL, stainless stseel, 2500
ltr.
078F399, 1 RIBBON BLENDER WITH DISCHARGE SCREW,
CARNITECH, type CT-2085, stainless steel, 5000 ltr.
057G242, 1 RIBBON BLENDER,
DRAIS, type S700, stainless
steel, 700 ltr., 7,5 kW.
019G061, 1 DOUBLE SHAFT
RIBBON BLENDER, BMW, stainless steel, 3000 ltr., 2x18,5 kW.
A. Foeth b.v.
-
094Z361 – 366, 5 RIBBON
BLENDERS, SGM SCHICHAU
GRIEP MISCHTECHNIK,
type DS160, stainless steel,
18.500 ltr., 58 kW.
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
Partnr.
036E144
043F217
104X554
148T495
026A131
012G041
203X712
032W94
165F837
070U519
099T613
094Y671
057G242
094P375
051C241
083H366
093F496
051C242
094Y670
171M709
147F710
060G265
080C362
019G061
078F399
094Z361
094Z365
094Z362
094Z366
Make
WERNER & PFLEIDERER
KEMUTEC
ALPINE
DRAIS
AMBLES ANDEVILLE
RUBERG KG
SPANGENBERG
SPANGENBERG
Type
Capacity(Ltr.)
2,5
5,0
K-15L
15,0
KS 80
80,0
100,0
HM-400
400,0
500,0
TMA 500
500,0
500,0
ENGELSMANN/TRAPPER KMM-500/7.5
500,0
SPANGENBERG
TMA-500
500,0
FEHRE & CO. GMBH
550,0
DRAISWERKE
S-700
700,0
ALPINE
KM 10
1000,0
THURINGIA FOOD TECH VM-1000 VARIO M 1000,0
WERNER & PFLEIDERER SIMPLEX 17
1000,0
RUBERG KG
HM-1000
1000,0
THURINGIA FOOD TECH VM-1000
1000,0
FEHRE & CO. GMBH
1260,0
ALPINE
KM 20
2000,0
DRAIS
2500,0
KARL SCHNELL
2500,0
DRAIS WERKE GMBH
3000,0
V.D. BERG W’VEE
3000,0
CARNITECH
CT-3085
5000,0
SCHICHAU GRIEP
DS-160
18500,0
SCHICHAU GRIEP
DS-160
18500,0
SCHICHAU GRIEP
DS-160
18500,0
SCHICHAU GRIEP
DS-160
18500,0
Material
SS
SS
SS
SS
SS
1.4541
SS
SS
MS
SS
SS
1.4571
SS
SS
1.4571
MS
1.4301
1.4571
1.4571
SS
SS
SS
SS
SS
SS
1.4541
1.4541
1.4541
1.4541
Motor(KW)
0,37
230 Volt
0,55
2,2
7,0/9,0
15,0
15,5
4,0
7,5
15/18
2,2
7,5
11,0
7,5+11,0
6,6
37,0+22,0
4,0+5,5
3,0
24,0
22,0
26,0/39,0
13,0/20,0
2x18,5
22,0
58,0
58,0
58,0
58,0
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
5
VACUUM PROCESSING VESSELS
PROCESSING VESSELS
Partnr.
173M672
087F445
033C064
146M518
004Y057
063F292
107S404
026G114
035C079
056Y336
100Z417
046C161
032E107
089Z336
062R251
088F463
013X045
082Y454
010E098
035C080
063F293
074Z293
084W393
117X688
004Y045
117Z454
117Z455
110Y775
106U700
085A411
084W395
066F303
080H415
051T253
044T383
079P423
067A328
040Z162
104X551
073C355
Make
Type
Capacity(Ltr.)
BROGLI
BCKA 750
UNIMIX H&R
5,5
FRYMA RHEINFELDEN VME-6
6,0
BROGLI+CIE AG
MH.5.C
6,9
PRESSINDUSTRIA S.P.A. TE.3/SV/R/5
7,0
BROGTEC GMBH
MH-5
8,9
FILLWORTH
10,0
FRYMA AG
VME-12
12,0
BECOMIX
RW-15
12,0
UNIMIX HAAGEN&RINAU SR-15
15,0
BECOMIX
RW-15
15,0
FRYMA AG
VME-20
20,0
NANYANG INDUSTRY
20,0
FRYMA
VME-20
20,0
KRIEGER
MMU-20
20,0
FRYMA AG
VME-20
20,0
BROGLI
MH-20C-1536
25,0
BECOMIX
RW-30
25,0
FRYMA
DT-50
50,0
RAYNERI MONTAIGU
MXR-50 MULTIMIX 50,0
FRYMA AG
DT-50
60,0
BECOMIX A. BERENTS RW-50
94,5
HAAGEN & RINAU
SR-3/100
150,0
SUTER
ARH-250-1
250,0
HAAGEN & RINAU
SR-200
265,0
BROGLI & CO.
MH-300 C
300,0
BROGLI & CO.
MH-300 C
300,0
FRYMA
VME-400
400,0
BROGLI
MH-500 C
500,0
FRYMA RHEINFELDEN VME-500
500,0
WOLFF APPARATEBAU VUM-400 PHARMA 516,0
HAAGEN&RINAU
UNIMIX SR-500
750,0
PRESSINDUSTRIA
800,0
VME-700
1000,0
FRYMA
HAAGEN & RINAU
SR-1000
1422,0
HAAGEN+RINAU
SRM 1250 S
1547,0
BECOMIX – A. BERENTS RW-1200
1628,0
BROGLI AG
MH-2000
2000,0
OSKAR KRIEGER
MMU-2500
2870,0
BECOMIX
RW-5000 S
5000,0
Material
Motor(KW)
SS
SS
900 WATT
SS
0,75+0,5
SS
MOTOR
SS
0,22+0,55
1.4571
2x 0,37
SS
PNEU/HYDR
AA
0,5+0,12
SS
0,37+2,5
SS
0,37+1,1
1.4571
0,37
316
1,1+0,75
SS
0,37+1,5
SS
1,1+0,75
SS
SS
0,75
1.4301
316
2,2+0,55
SS
1,5+4,0
316L
0,75+3,0
1.4301
1,1+3,7
1.4571
1,5+3,7
SS
2,2+1,1
SS
2x 4,0
SS
3,0
1.4301
4,7/6,0
SS
4,7/5,7
1.4401
7,5+6,5
1.4301
4,7+9,5
SS
7,5
1.4571
5,5+11,0
1.4541
5,5+11,0
SS 316
7,5
SS
7,5+15,0
SS
7,5+11,0
SS
7,5
1.4541
15,0/18,5
1.4301
12,0+21,0
1.4301
4,0+12/22
1.4541
15,0+45,0
074Z293, 1 VACUUM
PROCESSING VESSEL, BECOMIX, type RW-50, stainless steel,
94,5 ltr. Jckt, with homogenizer.
035C080, 1 VACUUM PROCESSING VESSEL, RAYNERI,
type MXR-50, 50 ltr., stainless
steel, Jckt.
117Z455, 1 VACUUM PROCESSING VESSEL, BROGLI,
type MH-300 l Pharma, stainless
steel, 300 ltr., Jckt, with homogenizer.
110Y775, 1 VACUUM PROCESSING VESSEL, FRYMA,
type VME-400, stainless steel,
400 ltr., Jckt, with homogenizer.
040Z162, 1 VACUUM PROCESSING VESSEL, BROGLI,
type MH-2000, stainless steel,
2000 ltr., with homogenizer.
073C355, 1 VACUUM PROCESSING VESSEL, BECOMIX,
type RW-5000S, stainless steel,
6755 ltr., Jckt., + homogenizer, +
2 vessels.
087F445, 1 VACUUM
PROCESSING VESSEL,
UNIMIX, stainless steel,
5,5 ltr., Jckt., with homogenizer.
088F463, 1 VACUUM
PROCESSING VESSEL, FRYMA, type
VME 20, stainless
steel, 20 ltr., Jckt. +
homogenizer.
063F292, 1 VACUUM
PROCESSING VESSEL,
BROGTEC, type MH-5,
stainless steel, 8,9 ltr.,
Jckt., with homogenizer.
010E098, 1 VACUUM
PROCESSING VESSEL, FRYMA, type
DT 50, stainless steel,
Jckt., + homogenizer.
033C064, 1 VACUUM
PROCESSING VESSEL,
FRYMA, type VME-6,
stainless steel, 6 ltr.,
Jckt., with homogenizer.
035C079, 1 VACUUM
PROCESSING VESSEL,
BECOMIX, type RW-15,
stainless steel, 23 ltr.,
Jckt., + homogenizer.
085A411, 1 VACUUM PROCESSING VESSEL, FRYMA, Type VME-500, stainless
steel, 500 ltr., Jckt, with homogenizer.
056Y336, 1 VACUUM
PROCESSING VESSEL,
UNIMIX, type SR-15,
26 ltr., stainless steel,
Jckt., with homogenizer.
067A328, 1 VACUUM PROCESSING VESSEL, BECOMIX, type RW-1200, stainless
steel, 1200 ltr., Jckt. , with homogenizer.
THIS IS JUST A SELECTION OF WHAT WE HAVE.
MUCH MORE AVAILABLE ON OUR WEBSITE
WWW.FOETH.NL
084W395, 1 VACUUM
PROCESSING VESSEL,
WOLFF, type VUM400 pharma, stainless
steel, 516 ltr., Jckt., with
homogenizer.
106U700, 1 VACUUM
PROCESSING VESSEL,
BROGLI, type MH 500 C,
stainless steel, 500 ltr.,
Jckt, with homogenizer.
SCREW CONVEYORS APPROX. 50 OFF AVAILABLE
LENGTHS 0,5 M UP TO 10 MTS.
051T253, 1 VACUUM
PROCESSING VESSEL,
FRYMA, type VME 700.
stainless steel, 1000 ltr.,
Jckt, + homogenizer.
079P423, 1 VACUUM
PROCESSING VESSEL,
HAAGEN + RINAU, type
SRM 1250 S, stainless
steel, 1547 ltr., Jckt, +
homogenizer.
104X551, 1 VACUUM
PROCESSING VESSEL, KRIEGER, type
mmu-2500, stainless
steel, 2870 ltr., Jckt, with
homogenizer.
HEAT EXCHANGERS TUBE/SHELL APPROX. 110 OFF AVAILABLE
HEATING SURFACES 0,5 M2 UP TO 60 M2
022G082, 1 VIBRO FEEDER, stainless steel, Dia. 260x6200 mm.
023C127, 1 HEAT EXCHANGER,
stainless steel, 5,8 m2.
026F109, 1 HEAT EXCHANGER,
stainless steel, 42 m2.
011G040, 1 SPIRAL
CONVEYOR, stain013G030, 1 CONVEYOR SCREW,
less steel, outlet
height 4150 mm, Jckt. mild steel, Dia. 200x4950 mm.
026F110, 1 HEAT EXCHANGER,
stainless steel, 13 m2.
022G090, 1 PLATEN
HEAT EXCHANGER, 063G293, 1 HEAT EXCHANGER,
14,99 m2.
stainless steel, 60 m2.
073B414, 1 HORIZONTAL CONVEYOR SCREW, stainless steel, Dia.
240x3150 mm.
009G029, 1 CONVEYOR SCREW,
Dia. 300x6900 mm, stainless steel.
038F216, 1 HEAT EXCHANGER,
stainless steel, 14 m2.
063G292, 1 HEAT EXCHANGER,
stainless steel, 62,5 m2.
083F439, 1 CONVEYOR SCREW
WITH HOPPER,
060G266, 1 HORIZONTAL CONVEY- stainless steel, Dia.
OR SCREW WITH HOPPER, stain200x1775 mm, hopless steel, Dia. 400x5000 mm.
per 1750 ltr.
038F179, 1 HORIZONTAL CONVEYOR SCREW, stainless steel, Dia.
600x7500 mm.
091F530, 1 HEAT EXCHANGER,
stainless steel.
046G185, 1 PLATEN
HEAT EXCHANGER, 053E225, 1 HEAT EXCHANGER,
15,8 m2.
stainless steel, 97 m2.
007G011, 1 CONVEYOR SCREW,
stainless steel, Dia. 300x3800 mm.
022G081, 1 VIBRO FEEDER, stainless steel, Dia. 260x6200 mm.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
6
REACTORS/PRESSURE VESSELS/STIRRING VESSELS
029G101, 1 REACTOR,
HAAGE, type 1220, stainless steel, 1 ltr., 200 bar,
electric heating.
035G158, 1 REACTOR,
GRAEVEN, stainless steel,
34 ltr., vac./16 bar, Jckt.
(16 bar), 0,25 kW.
035G164, 1 REACTOR,
HAAGE, type Autoklav
1220, hastelloy, 54 ltr.,
165 bar, Jckt. (32 bar).
037F166, 1 REACTOR,
PACKO, stainless steel,
70 ltr., vac./7 bar, Jckt.
(11 bar), 0,25 kW.
088F462, 1 REACTOR,
SEITZ, type DB-110, stainless steel, 131 ltr., 3 bar,
Jckt. (2 bar), 0,18 kW.
035G165, 1 VERTICAL
PRESSURE TANK, stainless steel, 138 ltr., vac./
16 bar, Jckt. (vac./16 bar).
026F099, 1 REACTOR,
RUTZ, stainless steel,
230 ltr., vac./6 bar, Jckt.
(6 bar), 1,5 kW.
035F150, 1 REACTOR,
STERIDOSE, stainless
steel, 310 ltr., vac./3 bar,
Jckt. (3 bar), 0,18 kW.
027G093, 1 REACTOR,
DE RIJK, stainless steel,
745 ltr., 2,5 bar, Jckt.
(2,5 bar).
026F101, 1 REACTOR,
VOEGELE, Hastelloy,
860 ltr., 6 bar, Jckt. (20 bar),
1,5 kW.
005G007, 1 STIRRING
VESSEL, BOLZ, stainless
steel, 1100 ltr., Jckt. (4 bar),
7,5 kW.
053G202, 1 CLOSED
STIRRING VESSEL, GPI,
stainless steel, 1800 ltr.,
vac./1,5 bar, 1,1 kW.
023G075, 1 STIRRING
VESSEL, FIB, stainless
steel, 3400 ltr., Jckt. (6 bar),
paddle stirrer + homogenizer.
132X770, 1 STIRRING
VESSEL, HOESCH, type
GK6/3500/SO, Hastelloy
c.2.4610, 3500 ltr., Jckt.,
9,2+7,5 kW.
040F273, 1 REACTOR, SCHÖLLERBLECKMANN, stainless steel, 230 ltr.,
47 bar, Jckt. (6 bar), 2,6 kW.
050C540, 1 REACTOR, ZSCHOKKE
WATERMANN, 630 ltr., stainless steel,
40 bar, Jckt. (12 bar), 5 kW.
050C541, 1 REACTOR, ZSCHOKKE,
1000 ltr., stainless steel, 40 bar,
Jckt. (12 bar), 10 kW.
050F340, 1 REACTOR, SCHÖLLERBLECKMANN, type Autoklav 1000,
stainless srteel, 1152 ltr., 47 bar, Jckt.
(6 bar), 5,5 kW.
042B288, 1 REACTOR, GTI-FIB,
stainless steel, 1300 ltr., vac./23 bar,
Jckt. (23 bar), 0,75 kW.
GLASS LINED REACTORS APPROX. 60 OFF AVAILABLE
001A028, 1 REACTOR, PFAUDLER,
glass lined, 4 ltr., Jckt.
(16 bar), 0,37 kW.
029G104, 1 REACTOR,
PFAUDLER, glass
lined, 16 ltr., Jckt.,
0,55 kW.
071F358, 1 REACTOR,
DE DIETRICH, type
AE100, glass lined,
129 ltr., vac./6 bar, Jckt.
(6 bar), 1,5 kW.
026F103, 1 REACTOR,
DE DIETRICH, type
AE-63 L, glass lined,
90 ltr., vac./ 6 bar, Jckt.
(6 bar), 1,1 kW.
026F107, 1 REACTOR, PFAUDLER, type
DG-500, glass lined,
635 ltr., vac./ 6 bar,
Jckt. (6 bar), 3 kW.
047T262, 1 REACTOR,
THALE, glass lined,
1475 ltr., vac./6 bar,
Jckt. (6 bar), 5 kW.
006W034, 1 REACTOR PFAUDLER, type
BE 1600, glass lined,
2322 ltr., vac./3 bar,
Jckt. (6 bar), 11 kW.
067G290, 1 REACTOR, PFAUDLER, type
BE2500, glass lined,
3472 ltr., vac./6 bar,
Jckt. (vac./6 bar),
6,8 kW.
091F467, 1 REACTOR, DE
DIETRICH, glass lined, 127 ltr,.
vac./6 bar, Jckt. (13 bar),
1,1 kW.
071E336, 1 REACTOR,
PFAUDLER, type 250L, glass
lined, 330 ltr., vac./10 bar, Jckt.
(6 bar), 2,5 kW.
050F343, 1 REACTOR, DE
DIETRICH, type AE-400, glass
lined, 545 ltr., vac./6 bar, Jckt.
(7 bar), 1,35 kW.
039E130, 1 REACTOR,
PFAUDLER, type BE630, glass
lined, 868 ltr., vac./6 bar, Jckt.
(6 bar), 5,5 kW.
071F409, 1 REACTOR,
PFAUDLER, type T-800, glass
lined, 865 ltr., vac./12 bar, Jckt.
(6 bar), 4 kW.
040G127, 1 PRESSURE VESSEL, DE DIETRICH, type
RFS-1200, glass lined, 1300 ltr.,
vac./6 bar.
071F359, 1 REACTOR,
PFAUDLER, type BE-2500 HRS,
glass lined, 3472 ltr., vac./6 bar,
Jckt. (12 bar), 7,5 kW.
091F532, 1 REACTOR, DE
DIETRICH, type AE-2500,
Glass lined, 3468 ltr., vac./6 bar,
Jckt. (7 bar).
062E205, 1 REACTOR, DE
DIETRICH, type CE-8000, glass
lined, 8744 ltr., vac./6 bar, Jckt.
(16 bar), 24 kW.
062E262, 1 REACTOR, DE
DIETRICH, type BE-8000, glass
lined, 9353 ltr., vac./6 bar, Jckt.
(16 bar), 37 kW.
039E135, 12 REACTOR,
PFAUDLER, type E-8000,
9055 ltr., glass lined, vac./4 bar,
Jckt. (6 bar), 7,5 kW.
055G297, 1 REACTOR, DE
DIETRICH, type BE 16000, glass
lined, 18.169 ltr., vac./6 bar, Jckt.
(6 bar), 22 kW.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
7
REACTORS/PRESSURE VESSELS/STIRRING VESSELS
050C476, 1 REACTOR, KÜHNI, stainless steel, 1600 ltr., vac./3,2 bar, Jckt.
(16 bar), 3,6 kW.
091F533, 1 REACTOR, OLTEN, stainless steel, 2325 ltr., vac./6 bar, Jckt.
(13 bar), 7,5 kW.
071F361, 1 REACTOR, DEPREST,
stainless steel, 2400 ltr., vac./6 bar,
Jckt. (12 bar), 7,5 kW.
050C475, 1 REACTOR, CATTANEO,
stainless steel, 3412 ltr., vac./6 bar,
Jckt. (13 bar), 3,6 kW.
050C441, 1 REACTOR, SCHOLL,
stainless steel, 3475 ltr., vac./3,2 bar,
Jckt. (13 bar), 3,6 kW.
091F526, 1 REACTOR, ROMABAU,
stainless steel, 4000 ltr., vac./3,2 bar,
Jckt. (13 bar), 5,5 kW.
040G130, 1 STIRRING VESSEL,
JACKSON, stainless steel, 4200 ltr.,
Jckt.
004B184, 1 REACTOR, GRIESSER,
stainless steel, 5.200 ltr., vac./30 bar, Jckt.
(10 bar), 11 kW.
039E190, 1 REACTOR, ASCA, stainless
steel, 5256 ltr., vac./6 bar, Jckt. (20 bar),
13,5 kW.
071E335, 1 REACTOR, ALPHA, stainless steel, 5350 ltr., vac./3,2 bar, Jckt.
(16 bar), 18 kW.
091F531, 1 REACTOR, CATTANEO,
stainless steel, 5440 ltr., vac./6 bar,
Jckt. (13 bar), 10 kW.
050C392, 1 REACTOR, ROMABAU,
stainless steel, 6300 ltr., vac./3,2 bar,
Jckt. (16 bar), 7,3 kW.
071E326, 1 REACTOR, SANDOZ,
stainless steel, 6300 ltr., vac./3,2 bar,
Jckt. (16 bar), 17,5 kW.
050C403, 1 REACTOR, ROMABAU,
stainless steel, 6578 ltr., vac./6 bar,
Jckt. (8 bar).
062E230, 1 REACTOR, INOXMAURER, stainless steel, 8500 ltr.,
vac./3,2 bar, Jckt. (16 bar)
YOU CAN FIND OUR COMPLETE LIST ON OUR WEBSITE WWW.FOETH.COM
062E216, 1 REACTOR, HAGEMANN,
stainless steel, 8200 ltr., vac./3,2 bar,
Jckt. (16 bar), 17,5 kW.
071E320, 1 REACTOR, ALPHA, stainless steel, 8580 ltr., vac./3,2 bar, Jckt.
(16 bar), 13,5 kW.
050C518, 1 REACTOR, STEINEMANN,
stainless steel, 10.240 ltr., vac./6 bar,
Jckt. (vac./13 bar), 9 kW.
050C536, 1 REACTOR, ALPHA, stainless steel, 11.600 ltr., vac./6 bar, Jckt.
(13 bar), 11,5/15 kW.
050C534, 1 REACTOR, MEILI, stainless steel, 11.700 ltr., vac./6 bar, Jckt.
(13 bar), 11,5 kW.
035B239, 1 REACTOR, COTI, stainless
steel, 12.303 ltr., vac./3 bar, Jckt. (4 bar)
1,5 kW.
035B247, 1 REACTOR, COTI, stainless steel, 12.520 ltr., vac./3 bar, Jckt.
(4 bar), 22 kW + 9 kW.
071E325, 1 REACTOR, STIHLER,
stainless steel, 13.100 ltr., vac./2 bar,
Jckt. (6 bar), 6,8 kW.
062E261, 1 REACTOR, ALPHA, stainless steel, 13.590 ltr., vac./3,2 bar, Jckt.
(16 bar), 22 kW.
071E319, 1 REACTOR, ALPHA, stainless steel, 13.670 ltr., vac./3,2 bar, Jckt.
(16 bar), 30 kW.
004B158, 1 REACTOR, ELLINGHAUS,
stainless steel, 15.500 ltr., vac./7 bar,
Jckt. (9 bar), 4 kW.
104X552, 1 REACTOR, PASS + CO,
stainless steel, 14.540 ltr., vac./20 bar,
Jckt. (20 bar).
122Y840, 1 REACTOR, BERTRAMS,
stainless steel, 16.490 ltr., vac./3,2 bar,
Jckt. (16 bar), 30 kW.
041A221, 1 REACTOR, FIB, stainless
steel, 19.000 ltr., vac./16 bar, Jckt.
(8 bar) Int.coil (6 bar), 11 kW.
016G073, 1 REACTOR, JACKSON,
stainless steel, 21.450 ltr., 0,5 bar, Jckt.
(6 bar), 7,5 kW.
035B249, 1 REACTOR, COTI, stainless
steel, 19.254 ltr., vac/3 bar, Jckt. (4 bar),
4 kW.
035B232, REACTOR COSMIT, stainless steel, 20.158 ltr., vac./3 bar, Jckt.
(4 bar), 4 kW.
050Y546, 1 REACTOR, FIB, stainless
steel, 20.800 ltr., 0,5 bar, Jckt. (2 bar),
7,5 kW.
073B406, 1 REACTOR FIB, stainless steel, 21.000 ltr., vac./3 bar, Jckt.
(6 bar), 43 kW.
062E228, 1 STIRRING VESSEL, LECHMANN, stainless steel, 21.000 ltr.,
vac./3,2 bar, 5,5 kW, with “Ruvastar’
stirrer.
071E303, 1 REACTOR, ALPHA, stainless steel, 21.230 ltr., vac./3,2 bar, Jckt.
(16 bar), 24 kW.
059Z221, 1 STIRRING VESSEL, EDEL,
stainless steel, 23.230 ltr., 5 kW+6,8 kW.
035B236, 1 REACTOR, COTI, stainless steel, 24.230 ltr., vac./3 bar, Jckt.
(4 bar), 4 kW.
050Y545, 1 REACTOR, FIB, stainless
steel, 30.000 ltr., vac./1 bar, Jckt.
(2,4 bar), 7,5 kW.
063R308, 1 REACTOR, ACOMETI,
1985, stainless steel, 50.000 ltr., 3,5 bar,
half coil Jckt. (5 bar), 15 kW.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
8
SIZE REDUCTION/MILLS
Partnr.
Make
Type
Dia.(mm)
080T475 HOELSCHERTECHNIK
GORATOR
050C546 ALJET
JET O MIZER
135K418 TEMA
VIBRATON
039T203 RAPSCO
MCGILL MILLER 3
044P190 ALPINE
63 C
63
026B131 FRYMA AG
JMRS-80
80
053G222 ALPINE
100-UPZ
100
102G523 PEPPINK
100-AN
100
038X266 APEX
260B-SS/SC/MFS
100
176I573 ZEHNDER
100
036E155 RETSCH GMBH HAAN
ZM-1
100
278D1014 ZEHNDER
110
041G193 ALPINE
C-100 UPZ
115
015F058 NETZSCH-CONDUX
Conjet 16-11-DS
120
039T213 UDY
CYCLONE SAMPLE 125
066Y360 BAUERMEISTER
Labormahlanlage
125
001W014 RETSCH
SR-2
135
214Y698 MICRO ATOMIZER
5 MA
140
036E167
140
089F485 RETSCH
140
003A052 APEX
MPX 3-348
150
059G275 NETZCH GMBH
CUM 150-SP-DN1
150
075B494 CONDUX HANAU
CLVZM 15/5
160
040C134 NEA NEUMANN & ESSER ICM 2,4-95/158
160
043Y259 PALLMANN
PPL-18
180
089S309
200
090A437 MICROTEC GMBH
UTM-200
200
001A043 BAUER BROS OHIO
TYPE 148 SIZE 8
200
019Z072 ALPINE AUGSBURG
200-AFG
240
095X599 ALPINE
250-Z
250
042Z180 ALPINE
250-Z
250
046C162 SHARPLES-STOKES
Tornado Mill
250
131M459 ALPINE
250 UP
250
019W121 KEK LTD
4B2
250
015G034 STOKES
Tornado Mill
250
015G035 STOKES
Tornado 44-0
250
064Y427 HOSOKAWA
FVP-1
250
031A173 APEX
COMMINUTING 114 260
027E101 APEX CONSTRUCTION 114 DW-SF
260
012Y118 HOSOKAWA MICRON
VP-1
260
012Y138 HOSOKAWA MICRON
VP-1
260
012Y140 HOSOKAWA MICRON
VP-1
260
012Y139 HOSOKAWA MICRON
VP-1
260
034G136 APEX/FITZPATRIC
260
050A273 HOSOKAWA MICRON
G-1030
260
053G203 APEX-MILL LTD
114-364 CF
260
102Z430 FREWITT FRIBOURG
MGH-6
270
085C501 THE FITZPATRICK
D6A COMMINUTOR 270
102Z429 FREWITT FRIBOURG
MGH-6
270
123N602 HOSOKAWA MICRON
FM 2
280
085F457
280
078U537 CONDUX
CUM-300
300
043R200 ENGELSMANN
MFL 85N/80-E1
300
100E4527 BOHMTEN
R5
300
071W369 PEPPINK
300-W
300
091C420 BAUERMEISTER & CO. UT-12
305
037W562 HOSOKAWA MIKROPUL ACM-15
325
017B457 THE PASCALL
MODEL NO. 2
345
017B456 THE PASCALL
MODEL NO. 2
345
011E042 THE FITZPATRICK
FAS-012
360
004Y030 SPANGENBERG
SECOMAT
365
059F264 CONDUX HANAU
CST-380/G
380
059C265 CONDUX HANAU
H-35
390
059C266 CONDUX HANAU
H-35
390
160P705 PALLMANN
PP 4
400
185M712 CONDUX
HM 40/22
400
064W265 PALLMANN
REF-4
400
104A559 ISMAR MASCHINEN
JUNIOR VHS
400
023E097 FORPLEX INDUSTRIE
FNG-3
430
058B359 FORPLEX INDUSTRIE
FNG-3
430
009P020 SWECO
M 18
435
059F263 BAUERMEISTER
UT-33
440
173K675
450
100Y740 BAUERMEISTER
UT-22
450
101A517 PASCALL ENGINEE
MODEL NO. 3
450
167K649
500
049H213 ALPINE AG
500 UP
500
030Z132 CONDUX
CST-680/G
550
017C111 ALPINE AUGSBURG
B-630 S
575
125Z497 PALLMANN
PHM-600X350
600
072K206 ROTOM VERKSTAED
1-78
600
179I589
600
124S572 PALLMANN
REF 6
600
135H610
600
100Y738 BAUERMEISTER
UT-32
600
126E627 WINBERGS
60-50 T6B
600
123Y833 DERICHS UEBACH
JDP 60-80
600
123Y834 DERICHS UEBACH
JDP 60-80
600
090Z345 BAUERMEISTER
UT-32
600
011K023 ROTOM VERKSTAED
1-78
600
045G317 HOSOKAWA MICRON
VP-4
630
041Z173 FORPLEX
FL-4
650
041Z170 FORPLEX
FL-4
650
041Z174 FORPLEX
FL-4
650
041Z171 FORPLEX
FL-4
650
034F280 JAECKERING HAMM
ULTRA ROTOR III
700
052P271 SWECO
DM 3
750
038C077 BAUERMEISTER
UT-43
780
070Y762 BAUERMEISTER
UT-42/USCH-42
780
016A134 BAUERMEISTER
UT-42
800
016A133 BAUERMEISTER
UT-42 SL
800
124N611 AUBEMA
2508/8
800
002U39 PALLMANN
PR 6 Z
850
094Y625 CONDUX
HR9/N3
900
021U227 WILLIAM BOULTON
AM-2
1100
215B1017 PALLMANN
REF 12
1120
073A348 BAUERMEISTER
UT-62
1200
050W221 BAUERMEISTER
UT-62
1200
081T492 HEINRICH WIGGER
RW 14/8
1400
081T491 HEINRICH WIGGER
RW 14/8
1400
060G264, 1 LUMP BREAKER,
KARL SCHNELL, type 491,
stainless steel, 500x1000 mm,
7,5 kW + bin lifter.
GRINDERS – BREAKERS
Width(mm) Motor(KW)
2,5
316
2,2
2,2
NO MOTOR
0,92
0,23
2 HP
600 Watt
3,5 PS
920 Watt
1,5
± 1,0
2,0/2,6
NO MOTOR
5,5
30
50
45
45
190
120
80
120
120
60
150
295
150
145
150
140
150
300
320
150
150
115
305
80
220
100
185
185
350
300
350
800
180
500
200
200
180
800
400
450
250
170
220
220
220
800
170
200
400
240
240
1,1
0,75
4,0
1,1
2,2
4,0+1,5
18,5
9,0
15,0
3,0
15,0
6,5
4,0
11,0
4,0
3,3
3,3
7,5
22,0/30,0
7,5/8,6
7,5/8,6
7,5/8,6
7,5/8,6
7,5
7,5
5,0
4,0
4,0
4,0
5,5
5,5
6,0
24,0
5,5
5,5
12/14,5
11,0+1,1
0,75
0,75
29,0
7,5
NO MOTOR
NO MOTOR
NO MOTOR
15,0+7,5
5,5
22,0
11,0
30,0
37,0
0,185
18,5
NO MOTOR
18,5
1,5
22,0
37,0
45,0
NO MOTOR
75,0
132,0
55,0
30,0
NO MOTOR
37,0
NO MOTOR
37,0
37,0
30,0
90,0
55,0
75,0
75,0
75,0
75,0
75,0
0,82
37,0
37,0
45,0
45,0
45,0
55,0
13,0
1,5
NO MOTOR
110,0
NO MOTOR
75,0
75,0
042B324, 1 LUMP BREAKER,
KÖLLEMANN, type AJK-KBDN160-1510x290, stainless
steel, 2x 160x1522 mm.
053G203, 1 HAMMER MILL,
APEX, type 114-364 CF, stainless steel, Dia. 260x145 mm,
5 kW.
053G222, 1 GRINDER
WITH VARIOUS GRINDING SETS, ALPINE, type
100 UPZ, stainless steel,
Dia. 110 mm, 0,92 kW.
034G136, 1 HAMMER
MILL, stainless steel, Dia.
260x150 mm, 7,5 kW.
095X599, 1 PRESSURE
PROOF PIN DISC MILL
ALPINE, type 250 Z,
stainless steel, Dia.
250 mm, 15 kW with filter.
015F059, 1 ULTRA FINE CLASSIFIER, NETZSCH-CONDUX,
type CFS8/HD-S, stainless steel,
pressure proof 10 bar.
066Y360, 1 GRINDER
WITH VARIOUS GRINDING ELEMENTS, BAUERMEISTER, stainless steel,
Dia. 125 mm, 2,0/2,6 kW.
030Z132, 1 PIN DISC MILL,
CONDUX, type CST-680/G,
Dia 550 mm, 45 kW.
078U537, 1 TURBO MILL,
CONDUX, CUM-300, stainless
steel, Dia. 300 mm, 6 kW.
059G275, 1 TURBO MILL,
NETZSCH-CONDUX, type CUM
150-SP-DN1, stainless steel,
Dia. 150 mm, 4 kW.
023E097, 1 IMPACT MILL,
FORPLEX, type FNG3, stainless
steel, Dia. 430x185 mm, 30 kW.
034F280, 1 ULTRA ROTOR
MILL, JÄCKERING, type UR III
A/B, Dia. 700x450 mm, 75 kW.
037W562, 1 MICRO AIR CLASSIFYING MILL, HOSOKAWA,
type ACM-15, Dia. 325 mm,
11 kW + 1,1 kW.
059F263, 1 TURBO MILL,
BAUERMEISTER, type UT-33,
Dia. 440 mm, 18,5 kW.
100Y738, 1 TURBO MILL,
BAUERMEISTER, type UT-32,
Dia. 600x180 mm, 37 kW.
038C077, 1 TURBO MILL,
BAUERMEISTER, type UT-43,
Dia. 780x170 mm.
073A348, 1 TURBO MILL,
BAUERMEISTER, type UT-62,
Dia. 1200x400 mm, 110 kW.
LUMP/ROLL/TEETH ROLL BREAKERS
05G225, 1 LUMP BREAKER,
SERVOLIFT, stainless steel, Dia.
240x240 mm.
A. Foeth b.v.
-
102Z430, 1 HAMMER
MILL, FREWITT, type
MGH6, stainless steel,
Dia. 270x150 mm, 4 kW.
059F264, 1 PIN DISC MILL,
CONDUX, type CST-380/G,
stainless steel, Dia. 380 mm,
22 kW.
YOUR SURPLUS EQUIPMENT
057C249, 1 BREAKER,
SCHEPENS, stainless steel, Dia.
300x400 mm, 7,5 kW.
085C501, 1 HAMMER
MILL, FITZPATRICK, type
VFS-DC-D6A-PCS, stainless steel, Dia. 270x140
mm, “Comminutor”.
041G193, 1 PIN DISC MILL,
ALPINE, type C-100UPZ, stainles ssteel, Dia. 100 mm.
PLEASE OFFER US
057F261, 1 ROLL BREAKER, BAUERMEISTER, type
ZWR-252, stainless steel, Dia.
250x900 mm, 11 kW.
091C420, 1 GRINDING LINE,
BAUERMEISTER, type UT-12,
stainless steel, Dia. 305x115
mm, 12,0/14,5 kW.
015G033, 1 LUMP BREAKER,
VAN BEEK, type pre-breaker,
Stainless steel, Dia. 290x280 mm,
1,5 kW.
Barneveld
The Netherlands
-
052G259, 1 DOUBLE SHAFT PIN
ROLL BREAKER, JEHMLICH,
stainless steel, Dia 200x300 mm,
3 kW + 0,18 kW.
011E042, 1 COMMINUTING MILL, FITZPATRICK,
type FAS-012, stainless steel,
Dia. 365x305 mm, 28 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
Partnr.
011F035
011F036
162F807
011F033
011F034
079B438
026W125
055G225
000I489
128M458
189M737
015G033
052G244
109K444
052G259
052G245
068G303
068G304
033C166
050N164
057C249
016A149
016A132
016A147
093W466
016A146
016A135
016A136
115Z442
033C165
231D847
057F261
057F260
060G264
042B324
Make
KUEENLE HEMMING
KUEENLE HEMMING
Type
KTE 160 M4
KTE 160 M4
KUEENLE HEMMING
KUEENLE HEMMING
KARL MERZ
KARL MERZ
SERVOLIFT
KTE 160 M4
KTE 160 M4
LWBP 2/2
LWBP 2/2
VAN BEEK DRUNEN
JEHMLICH NOSSEN
SOLIDS SYSTEMS
JEHMLICH NOSSEN
JEHMLICH NOSSEN
JEHMLICH NOSSEN
JEHMLICH NOSSEN
VECOPLAN-HACKER
Pre-breaker
Walzenbrecher
KBDT 330X320
Walzenbrecher
Walzenbrecher
Roller Crusher
Roller Crusher
35/8/2 V
WERKHUIZEN
HANS KOCK, LÜBECK
BERTUZZI FOOD
ALPINE
OTTEVANGER
BAUERMEISTER
BAUERMEISTER
KARL SCHNELL
KÖLLEMANN ADENAU
SC-0705
51/85 DBZ
ZWR-252
ZWR-252
491 Breaker
KB-1510X290
Width(mm)
200
200
240
250
250
270
280
300
300
300
300
300
300
350
390
400
440
440
440
445
450
450
450
530
800
900
900
900
1000
1510
Dia.(mm)
180
180
180
180
200
200
240
300
200
120
290
200
150
200
200
200
200
280
250
300
220
220
220
600
160
160
160
600
500
300
250
250
500
2x 160
Motor(KW)
11,0
11,0
2,0
11,0
11,0
1,5+0,75
2x 1,5
1,5
0,75
3,0
1,5
3,0
2,2
3,0
3,0
3,0+0,18
3,0+0,18
22,0
2x 2,2
7,5
5,5
5,0
5,5
7,5
2x 11,0
2x 4,0
11,0
11,0
7,5
7,5
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
9
SIEVES
VIBRO SIEVES
055G224, 1 VIBRO SIEVE,
RUSSEL, type 17300/LD, stainless steel, Dia. 515 mm.
048G189, 1 VIBRO SIEVE,
VIBROWEST, type MR-24
S5.5.5.C, stainless steel,
2 decks, Dia. 600 mm.
041F170, 1 VIBRO SIEVE,
SWECO, type S-30, stainless
steel, Dia. 762 mm.
059G268, 1 VIBRO SIEVE,
LEHMANN, type VSC, stainless
steel, Dia. 840 mm.
087F447, 1 VIBRO SIEVE,
MOGENSEN, type VRS 1000/1,
stainless steel, Dia. 1000 mm.
069F390, 1 VIBRO SIEVE,
SWECO, type ZS-40, stainless
steel, Dia. 1016 mm.
047G181, 1 VIBRO SIEVE,
SWECO, type S48 S 888, stainless
steel, Dia. 1150 mm.
054G221, 1 VIBRO SIEVE,
RUSSEL FINEX, type 30048 Eco
separator, stainless steel, 2 Decks,
1150 mm.
061G281, 1 VIBRO SIEVE, ALLGAIER, type VTSF-600/1, stainless steel, Dia. 600 mm.
019G055, 1 VIBRO SIEVE,
RUSSEL, type 15555, stainless
steel, Dia. 900 mm.
059G267, 1 VIBRO SIEVE, LEHMANN, type VSD, stainless steel,
Dia. 1055 mm.
Type
Surface(M2)
PICCOLO
0,1
VSA
0,1
Piccolo Sizer
0,1
Piccolo Sizer
0,1
SUE
0,1
RO-TAP RX-29
0,1
0,2
16850 AIRSWEPT
0,2
09004003
0,2
16350
0,2
Compact 17240
0,2
0,2
16350
0,2
17300/LD/ES
0,2
0,2
SM.550.FP
0,2
17300
0,2
16350
0,2
MR-24 S5.5.5.C
0,3
VTSF-S600/1
0,3
SZV 800/5/6
0,3
GV 2/1 FT
0,3
SRK 8/4-1
0,3
VIBRECON SEPARA 0,3
MR-24 S5.5.5.C
0,3
MR-24 S5.5.5.C
0,3
LS-30 S 66
0,4
LS-309 S 66
0,4
SUE
0,4
0,4
FB LEHMAN
VSC
0,4
SWECO EUROPE SA
LS-30 S
0,4
LOCKER WARRINGT
Liquatex L-22
0,4
0,5
EMILOS CAVRIAGO
VIBROSCREEN 900 0,6
EMILOS CAVRIAGO
VIBROSCREEN 900 0,6
MERZ
570/50-650
0,6
EMILOS CAVRIAGO
VIBROSCREEN 900 0,6
EMILOS CAVRIAGO
VIBROSCREEN 900 0,6
CUCCOLINI
GRP-900
0,6
KARL MERZ
ULA 570/50/650
0,6
ALLGAIER
VTS 950/1
0,7
RUSSELL
15555
0,7
ALLGAIER-WERKE
TSM-950/1
0,7
RUSSEL
15555
0,7
FB LEHMANN
VSD
0,8
VIBRA GMBH
0,8
JÖST
SUE
0,8
SWECO EUROPE
ZS-40S 66+C
0,8
MOGENSEN
VRS-1000/1
0,8
RHEWUM
RIUS 600X1600
0,9
CUCCOLINI ITALY
VP2-1200-1X
0,9
RHEWUM REMSCHEID RIUS 600X1500
0,9
SWEO VIBRO
S-498 S 888
1,0
SWECO
S-48-S
1,0
SWECO EUROPE S.A.
S-48 S
1,0
SWECO VIBRO ENERGY PH-46 Y
1,0
WILLIAM BOULTON
48/2/ST/BT MKII
1,0
WILLIAM BOULTON
48/2/ST/BT MKII
1,0
RUSSELL FINEX
30048 ECO SEPAR
1,0
WILLIAM BOULTON
48/2/ST/BT MKII
1,0
SWECO
US-48” S 666
1,0
ALLGAIER WERKE
TSM-1200/1
1,1
MINOX SIEBTECHNIK
MTS-1200
1,1
SUPERIOR B.V.
ZM 1500/750/4
1,1
SHARPLESS
410Y
1,1
SPALECK BOCHOLT
SELU-750+1700
1,1
FUCHS BASEL
SIFTOMAT 5P
1,3
VIBRA
G-20/8-I-S-DV
1,3
GOUGH & CO.
VIBRECON SEPARA 1,3
ALLGAIER PROCES
TSI-143
1,5
THOMAR LOCKER
Rotex 422
1,5
ALLGAIER PROCES
TSI-143
1,5
VAV SCAN-VIBRO
SRS-10
1,6
SWECO EUROPE
US-60 S
1,8
CUCCOLINI ITALY
VLM-1500 1X
1,8
CUCCOLINI ITALY
VLM-1500 1X
1,8
SWECO EUROPE S/A
AVALANCHE 60”
1,8
CUCCOLINI ITALY
VLM-1500 01X
1,8
CUCCOLINI ITALY
VLM-1500 1X
1,8
CUCCOLINI ITALY
VLM-1500 1X
18
SWECO EUROPE S.A.
US-60 S 158+C
1,8
SWECO
US-60S-158+C
1,8
VAV SCAN-VIBRO
SRS Special
1,9
THOMAS LOCKER S.A. ROTEX 43
2,0
THOMAS LOCKER S.A. ROTEX 43
2,0
ENGELSMANN
E.D. 300/2-EM/S
3,0
ENGELSMANN
ST.A 10/6
4,7
MINOX SIEBTECHNIK
MTS-2600/4
5,3
MINOX SIEBTECHNIK
MTS-2600/4
5,3
ALLGAIER WERKE
TSMH-2600/4
5,3
6,0
Partnr.
036E140
175P848
076F426
076F427
036T196
060F320
124M554
008C021
051A286
080Y529
079F433
052M142
080Y528
055G224
089P405
038Y385
016E064
104P434
048G187
061G281
032U183
124W655
049A279
005U013
048G189
048G188
077B461
071E287
004B051
058S200
059G268
041F170
090A448
040D157
045A241
045A242
041S132
045A239
045A240
045A237
065S379
104X549
019G055
002A008
052P272
059G267
019G054
069Z277
069F390
087F447
116Y848
024G077
072Y446
047G181
025A125
025A126
008Y097
051U325
051U324
054G221
051U326
050A272
069F391
079B432
034C093
169K556
065U443
028B146
011E032
005U012
052G258
019G063
052G257
078F397
081F489
052G262
095F506
057B334
095F507
052G255
052G256
056B327
018Z068
078F400
038E136
038E137
006N019
023P111
086X441
011E030
022B125
001M008
Make
MOGENSEN GMBH
LEHMANN
MOGENSEN AB
MOGENSEN AB
JÖST
TYLER U.S.A./
KASON
RUSSELL
MURRE TECHNIEK B.V.
RUSSELL
RUSSELL
GOUGH+CO
RUSSELL
RUSSELL FINEX
RUSSEL
FARLEY GREEN
RUSSELL FINEX
RUSSEL
VIBROWEST
ALLGAIER
SUPERIOR B.V.
GOUGH ENGINEERING
VIBRA
GOUGH
VIBROWEST
VIBROWEST
SWECO EUROPE SA
SWECO EUROPE SA
JÖST MÜNSTER
Partnr.
036Z146
034G141
109T675
007T030
053G207
030H114
065E268
050C483
026F097
078E309
034G142
029M102
105K327
083N397
018E095
238H1088
050C479
031A167
228Z795
061S422
026F091
042F189
076F428
040P205
051B303
033G112
042F194
113H539
026F095
092Z348
092Z349
013X040
053G205
053G204
104W506
078Y540
078Y541
037G122
122S523
111X580
034B199
034B198
004Y083
076F425
076F424
072B398
081Z309
011F029
011F031
175P847
091W525
055G226
085F456
086A515
Make
POWTEC/DEMACO
GLATT AG
ALEXANDERWERK
ALEXANDERWERK
POWTEC REMSCHEI
VOEGELE
FREWITT
GLATT
FREWITT FRIBOUR
STEPHAN HAMELN
QUADRO CANADA
Material
MS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
316L
SS
SS
SS
SS
SS
1.4571
SS
SS
1.4541
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
ALU
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
316
SS
SS
SS
304
SS
DD
SS
SS
SS
SS
SS
SS
SS
SS
SS
MS
304
SS
SS
SS
321
SS
SS
ALU/SS
SS
304
304
SS
SS
SS
SS
SS
SS
SS
SS
316
MS
MS
1.4301
WOOD
304
304
MS
SS
Sizes(mm)
175x480
Dia. 433
200x500
200x500
500x250
Dia. 195
Dia. 560
Dia. 520
375x420
Dia. 510
Dia. 520
Dia. 450
Dia. 510
Dia. 515
Dia. 500
Dia. 525
Dia. 525
Dia. 520
0,48
Dia. 600
580x480
Dia. 610
800x400
Dia. 600
580X480
0,48
Dia. 762
Dia. 762
390x1000
750
Dia. 764
Dia. 762
625x625
1200x400
Dia. 880
Dia. 880
100x550
Dia. 880
Dia. 800
Dia. 880
570x1100
Dia. 950
Dia. 900
Dia. 950
Dia. 950
Dia. 1055
1500x550
1450x555
Dia. 1016
Dia. 1000
600x1500
Dia. 1200
600x1500
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1150
Dia. 1200
Dia. 1200
1500x750
Dia. 1200
650x1800
720x1800
1800x173
Dia. 1300
Dia. 1400
1,5
Dia. 1400
2000x800
Dia. 1524
Dia. 1500
Dia. 1500
Dia. 1524
Dia. 1500
Dia. 1500
Dia. 1500
Dia. 1524
Dia. 1524
3050x630
2100x950
2100x950
3200x950
1500x400
Dia. 2600
Dia. 2600
Dia. 2600
1750x3500
059G276, 1 ROTATING SIEVE,
ENGELSMANN, type Palafix
20/30 A, stainless steel, Dia.
200x300 mm, 0,55 kW.
078F401, 1 ROTATING SIEVE,
stainless steel, Dia. 250x650 mm.
078F403, 1 ROTATING SIEVE,
stainless steel, Dia. 300x800 mm.
SIEVE GRANULATORS
052G257, 1 TUMBLER
SCREENING MACHINE,
ALLGAIER, type TSI-143,
stainless steel, 3 Decks, Dia.
1400 mm.
086X441, 1 VIBRO SIEVE,
MINOX, type MTS-2600/4, stainless steel, 4 decks, Dia. 2600 mm.
034G142, 1 QUADRO MILL, type
Comil 197, stainless steel, Dia.
120x80 mm.
052G262, 1 VIBRO SIEVE,
CUCCOLINI, type VLM-1500 1X,
stainless steel, Dia. 1500 mm.
078F397, 1 VIBRO SIEVE,
VAV, type SRS, stainless steel,
2000x800 mm.
050C479, 1 CONICAL GRANULATING SIEVE, FREWITT, type
TC-200, stainless steel, Dia.
150x88 mm.
A. Foeth b.v.
-
069F391, 1 TUMBLER SCREENING MACHINE, ALLGAIER, type
TSM 1200/1, stainless steel, Dia.
1200 mm.
081F489, 1 VIBRO SIEVE,
SWECO, type US-60S, stainless
steel, Dia. 1500 mm.
078F400, 1 VIBRO SIEVE, VAV,
type SRS Special, stainless steel,
3 Decks, 3050x630/1400x630/
900x630 mm.
076F428, 1 CONICAL GRANULATING SIEVE, QUADRO, type
Comil U-20, stainless steel, Dia.
203 mm, 4 kW.
Barneveld
The Netherlands
-
Type
FG-90X75
GRS-80 S
AGM
KM 7 1/4
FG 90x85
PDK 8-12
GLA-ORV
TR-120
SG-129
KG-160 P
Comil 197
Width(mm)
75
80
80
80
90
100
100
120
120
120
120
145
ERWEKA
KU1
150
TK FIELDER
BETAGRIND
150
ERWEKA GMBH
AR-400/FGS
150
VIANI
FV 190
150
FREWITT FRIBOUR
TC-200
150
ERWEKA
FGS
150
WP
160
WERNER & PFLEIDERER EXPRESS 175/120
160
FREWITT FRIBOUR
MGR-336
195
FREWITT FRIBOUR
MGI-314
200
QUADRO ENGINEER
Clmil U-20
203
COURTOY
NR 2N
250
ALEXANDERWERKE
300
ALEXANDERWERK
R-300
300
ALEXANDERWERK
R-300
300
WERNER&PFLEIDERER
300
ALEXANDERWERK
R-300
300
KEK KEMUTEC POWDER BETAGRIND 300
340
KEMUTEC POWDER
BETAGRIND 300
340
KEK
BETAGRIND
340
MANESTY
Rotogran IV
340
MANESTY
Rotogran IV
340
KEK
340
KEK KEMUTEC
340
KEK KEMUTEC
340
MANESTY
Rotogran IV
350
MPI
S1
350
365
ALEXANDERWERK
RFG-350 V
FREWITT
MG-203
440
FREWITT
MG-203
440
FREWITT
MG
440
FREWITT FRIBOUR
MG-624
440
FREWITT FRIBOUR
MG-204
440
FREWITT
MG
440
POWTECH
300X450 NIBBLER
450
GERICKE
300x450 MK2
450
GERICKE
300x450 MK2
450
450
500
GERICKE
NBA 300/450
520
ALEXANDERWERK
RFG
750
800
Material
SS
SS
ALU
ALU
SS
SS
SS
SS
1.4404
SS
SS
SS/ALU
SS
SS
SS
SS
316L
SS
AL/SS
SS
1.4401
316
SS
SS/CS
ALU
SS
SS
SS
SS/ALU
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
1.4571
SS
SS
SS
SS
SS
SS
SS
SS/MS
SS/MS
SS
SS
SS
SS
SS
Motor(KW)
0,75
0,92
0,37
7,4
0,37
1,35
2,2
1,4/1,8
1,5
2,0
0,4
7,5
MOTOR
1,9
0,5
1,35
1,5
1,1
0,55
4,0
3,8
3,7
4,0
4,0
2,2
2,2
1,1
1,1
7,5
7,5
7,5
0,75
± 2,2
1,5
Make
MANESTY-BOOTS
MANESTY-BOOTS
ENGELSMANN
ENGELSMANN
ENGELSMANN
ENGELSMANN
ENGELSMANN
ENGELSMANN
Type
Length(mm)
250
250
Palafix 20/30 A
300
PA 2/3 A
300
PA 2/3 A
300
PA 2/3 A
300
PA 2/3 A
300
PA 2/3 A
300
350
JEL
400
MÜLLNER & LUX KG
450
450
KAMAS
SLUSA 2050-A
450
RUSSELL FINEX
17450
550
POWTECH
7X22 SIFTER
600
GERICKE
CSM-722 MK2
600
650
AZO
E-650
650
AZO
E-650
650
CERAM FRANCE
TS-4
750
750
CERAM FRANCE
TS-4
750
KEK-KEMUTEC
K-800
800
800
POWTEK LTD
15X42 SIFTER
930
POWTEK LTD
15X42 SIFTER
930
GALA INDUSTRIES USA 16.2 DW
950
BKG
TEW A-2000
1050
NIVOBA VEENDAM
Z-380 E
1200
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
Material
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
MS
MS
SS
MS
MS
SS
MS
MS
SS
MS
SS
SS
SS
MS
MS
SS
1.4301
SS
045E200, 1 ROTATING SIEVE,
NIVOBA, type Z-380, stainless
steel, Dia. 380x1200 mm, 4 kW.
1,1
1,1
4,0
4,0
4,0
9,0
4,0
0,75
0,75
ROTATING SIEVES
Partnr.
050Z192
050Z193
059G276
059G274
059G273
059G272
059G271
059G270
093R332
279D1068
083T535
035R157
042E138
004M018
001E005
078F401
050N162
050N163
012F080
041E316
012F079
055F275
078F403
016B074
016B075
004B040
004B191
045E200
055F275, 1 ROTATING SIEVE,
KEK, type K-800, stainless steel,
Dia. 300x800 mm.
Motor(KW)
0,55
0,55
0,55
0,55
0,55
0,55
053G207, 1 GRANULATING
SIEVE, POWTEC, type FG 90x85,
stainless steel, Dia. 85x90 mm,
0,37 kW.
2,2
1,1
2,2
2,2
2,2
1,1
1,5
1,5
0,75
3,0
0,75
0,75
2,2
5,5
5,5
5,5
6,5
4,0
042F189, 1 GRANULATING
SIEVE, FREWITT, type MGI 314,
stainless steel, Dia. 122x200 mm.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
10
DISSOLVERS / BUTTERFLY MIXERS
DISSOLVERS
Partnr.
041W203
004Z074
018X282
125P531
125P529
041W204
104X547
058Y358
062F490
018X281
104X548
041W205
098Y766
125P535
003K002
097Y712
070E253
008X018
141S644
039Z159
079Z306
101B581
070E255
070E254
082Z323
039Z160
146M522
122W659
091B561
074A364
005F008
070E256
079N315
044M160
090W549
036G116
036G117
146M525
010Y157
090U654
090U655
126H658
Make
VOLLRATH
DIAF A/S COPENHAGEN
VOLLRATH
VIBRO-MAC
VIBROMAC
VOLLRATH
VOLLRATH
VIBRO-MAC
NETZSCH GMBH
JOHANN KREUZIGER
JOHANN KREUZIGER
VOLLRATH
DRAIS
NETZSCH
VOLLRATH
WILHELM NIEMANN
COATEMA GMBH
MOLTENI
HUBBES
GRIESER
MTI MISCHTECHNIK
MASTERMIX
OATEMA GMBH
COATEMA GMBH
HUBBES
GRIESER
DRAIS
TURELLO ITALY
NIEMANN
NIEMANN
NIEMANN
COATEMA GMBH
DRAIS
NIEMANN
GRIESER
WILHELM NIEMANN
WILHELM NIEMANN
MITRAS KUNSTSTOFFE
NIEMANN
VOLLRATH
VOLLRATH
VIBRO-MAC
Partnr.
005S016
138M486
111N543
127X744
016G049
068X395
114X588
Make
VIBRO-MAC
VIBRO-MAC
MOLTENI
VIBRO-MAC
MOLTENI MILANO
VIBRO-MAC
MOLTENI
Type
Capacity(Ltr.)
VDSV-30
FFBH-24 EX
VDSV-50
HYDROMIX
VDSVY-50E
VDD-40
606.80
DSH 30079 ZV
DSH/250
VDSV-20
RN 2/30 VAC
606 (75)
VDSV 20
201
LAB-25
MESCOLATORE
VPLD-60 S
P-Z9-100/A.D
HBR-Z-2 DR
VPLD-600
RSV 14
50.120-2-SV
KDC 491-61 FU
KDV-1000 95
KDV-601
ZH1000
KDV 1000 S
M3-1100
VKDV-411
VKDV-411
VKDV-1700 WT
VDDY-60
VDDY-60
HS15/H
Material
SS/MS
MS
MS
MS
SS
MS
SS
20,0
40,0
50,0
62,0
100,0
250,0
400,0
400,0
500,0
600,0
700,0
750,0
850,0
1000,0
1000,0
1000,0
1000,0
1000,0
1200,0
1500,0
1500,0
2000,0
3000,0
4000,0
4000,0
10000,0
SS
SS
SS
SS
SS
SS
304
304
SS
1.4541
MS
SS
SS
304
SS
304
SS
SS/MS
SS/MS
1.4541
1.4541
SS
Motor(KW)
24,0
17,5
36,0
HYDRO
25,0/53,0
36,0
30,0
11,0
70,0
58,0
50,0
15,0
30,0
55,0
15,0
11,0/18,0
3,0
1,5
5,0
5,5+11,0
6,8+2,2
8,0/4,0
18,5
18,5
75,0/6,8
90,0+30,0
10,0
HYDR DRIV
45,0
70,0
44,0
45,0
70,0
80,0+17,5
30,0
30,0
75,0
125,0
44,0
55,0
HYDR.
BUTTERFLY-MIXERS
Type
Capacity(Ltr.)
Hydro Mix
HYDRO MIX
H.450
5,0
H-5 S.V.
5,0
30,0
PH/H-2000 SV
2000,0
Material
MS/SS
MS
SS
SS
SS
304
Motor(KW)
18,5
18,5
24,0
HYDR DRIV
5,5
5,5
HYDR.DRIV
070E253, 1 DISSOLVER,
COATEMA, type LAB25, stainless steel, 25 ltr., Jckt., 3 kW,
vacuum.
070E254, 1 DISSOLVER,
COATEMA, stainless steel,
400 ltr., Jckt., 18,5 kW, vacuum.
039Z159, 1 VACUUM PLANETARY DISSOLVER, 62 ltr.,
5,5 + 11 kW, make Grieser, type
VPLD-60.
039Z160, 1 VACUUM PLANETARY DISSOLVER, GRIESER,
type VLD-600, stainless steel,
640 ltr., Jckt., 90 kW + 30 kW.
011Y102, 1 IMMERSION
MILL MIRODUR, type
Turbomill 50 HP, stainless
steel, 37 kW.
039C145, 1 IMMERSION
MILL, NETZSCH, type
TM50, stainless steel,
37 kW.
091B561, 1 PHARMA DISSOLER, NIEMANN, type
KDV-491-61 FU, stainless
steel, 850 ltr., 45 kW.
070E256, 1 DISSOLVER,
COATEMA, stainless
steel, 1000 ltr., Jckt.,
vacuum.
036G116, 1 DISSOLVER, NIEMANN,
type VKDV411, vacuum,
1500 ltr., 30 kW.
074A364, 1 DISSOLVER,
NIEMANN, type KDV1000, vacuum, 70 kW.,
1000 ltr.
005F008, 1 DISSOLVER, NIEMANN, type
KDV-601, stainless steel,
1000 ltr., 44 kW.
062F490, 1 DISSOLVER,
type 606-80, stainless
steel, 70 kW.
010Y157, 1 VACUUM
DISSOLVER, NIEMANN,
type VKDV-1700 WT, mild
steel, 3000 ltr., 125 kW.
126H658, 1 DISSOLVER,
VIBROMAC, stainless
steel, 10.000 ltr., 160 kW.
THREE ROLL MILLS
090U654 and 090U655 2 DISSOLVERS, VOLLRATH, type
VDDY-60, stainless steel, 44 kW, 5100 ltr., Jckt.
THREE ROLL MILLS
Partnr.
068X393
030R107
042G170
042G169
034G140
163P738
034G139
085S334
141S634
141S632
141S635
Make
SMITH BLYTHE
HMV
BÜHLER
BÜHLER
BÜHLER
BÜHLER
BÜHLER
LEHMANN
LEHMANN
LEHMANN
LEHMANN
Type
Partnr.
120X675
120X674
069X364
039C145
177I547
070C324
016G043
008C018
118X749
038C078
016G046
016G047
028A127
002C003
125S488
070C323
060E224
122N606
147K499
056Z222
087B539
089N525
027A181
125P533
066B418
237H1091
089I297
041G192
028R088
043R230
016G068
016G067
082W412
168P754
038S118
004Y054
022Y162
004Y050
075M261
011Y102
069Z278
049E172
035B225
005S664
060U432
035E113
021G078
021G079
056E208
092A450
092A451
092A452
147K501
092A453
092A455
069S259
005S663
005S011
046N158
046N159
102M338
010Y160
096T581
005F011
005F009
005F010
058Y359
013T741
010Y156
135N667
011X129
Make
VMA-GETZMANN
VMA-GETZMANN
NETZSCH
NETZSCH GMBH SELB
WELTE
FRYMA MASCHINEN AG
FRYMA AG
WAB
WAB
WAB
SUSSMEYER
SUSSMEYER
FRYMA MASCHINEN AG
FRYMA AG
DRAIS
FRYMA MASCHINEN AG
FRYMA AG
NETZSCH
NETSZCH
FRYMA MASCHINEN AG
FRYMA MASCHINEN AG
NETZSCH
NETZSCH
VIBRO MAC
WAB
DRAIS
NETSCH
WAB BACHOFEN
UNION PROCESS
DRAIS
FRYMA AG
FRYMA AG
WIENER
HOSOKAWA MICRON
DRAIS
VOLLRATH
COMEC SASSUOLO
VOLLRATH
NETSCH
MIRODUR SPA
DRAIS
NETZSCH GMBH
NETZSCH
NETZSCH
COMEC
DRAIS MANNHEIM
NETZSCH GMBH
NETZSCH GMBH
WAB BACHOFEN
DRAIS
DRAIS
DRAIS
NETZSCH
DRAIS
DRAIS
SUSSMEYER
NETZSCH
NETZSCH
DRAIS
DRAIS
NETSCH
NETZSCH
MASTERMIX
WAB
WAB
WAB
ROUSSELLE
WIENER
NETZSCH
SUSSMEYER
NETZSCH
02P
SDY-200
SDX-600
SDW-800
SDT-800
SDV-900
WD 13E
WD 13
WD-13
WD-13
Width(mm)
180
200
200
600
800
800
900
1300
1300
1300
1300
Dia.(mm)
100
60
150
200
300
400
400
400
400
400
400
Motor(KW)
0,37
2,2
10,0
042G170, 1 THREE ROLL MILL,
BÜHLER, type SDY-200, Dia.
150x200 mm, 2,2 kW.
042G169, 1 THREE ROLL MILL,
BÜHLER, type SDX-600, Dia.
200x600 mm, 10 kW.
034G140, 1 THREE ROLL MILL,
BÜHLER, type SDW-800, Dia.
300x800 mm.
141S634, 1 THREE ROLL MILL,
LEHMANN, type WD13, Dia.
400x1300 mm, 55 kW.
SAND MILLS
34,0
55,0
55,0
55,0
55,0
SAND MILLS
Type
Capacity(Ltr.)
DISPERMAT
DISPERMAT
RS-200
TM-50
RS 4
0,2
MSM-12
0,5
MSZ-12
0,5
KDL
0,6
KDL-SPECIAL
0,6
KDL-SPECIAL
0,6
1,0
1,0
MS-18
1,1
MS-18
1,1
PM1 STS
1,3
MSM-32
2,4
MS-32
2,4
LMJ 2 (506.02)
2,5
RM26
2,6
MSZ-32
3,0
MS-32
3,4
LME 4 (574.04)
4,0
KE-5 MOLINEX
5,0
SUBMILL LABOR
5,0
KD-5
5,0
PM 5
5,0
05
5,0
KD-5
5,0
B/SIZE 1-S
5,0
PM 5 TEX-H
6,0
MSZ-50
6,0
MSZ-50
6,0
W1S
6,5
AQ 5
7,9
RS20
8,0
VMSM 2/8B
8,0
MICRONET M8
8,0
VMSM 2/8B
8,0
RM 7
8,7
TURBOMILL 50HP 10,0
PM-12,5
12,5
LME-20
21,2
LME-20
21,2
RM-25
25,0
MICRONET 25
25,0
PMC-25 TEX
25,0
LMZ-25
25,0
LMZ-25
25,0
KD-60
25,0
PMV-25 RL
26,0
PM-25 RL-V
26,0
PM-25 RL-V
26,0
R20L
26,0
PMV-25 RL
26,0
PMV-25 RL
26,0
HM-30
30,0
LMJ-33
33,0
LMJ 35
35,0
PM-40 STS
40,0
PM 40-STS
40,0
LMJ 45
45,0
RM-50 GK
55,0
CH-60
60,0
KD-60 C
60,0
KD-60 C
60,0
KD-60 C
60,0
TYPE 100
100,0
W.15.S
100,0
RM-100 GK
100,0
HM 150 E.H.P.
150,0
LME-200K
235,0
A. Foeth b.v.
-
Material
Motor(KW)
SS/GLASS
2,2
SS/GLASS
2,2
SS/COATI
30,0
SS
37,0
SS
1,1
MS
3,0
MS
3,0
SS
1,85
1,85
MS
1,85
SS
0,55
SS
0,55
1.4034
7,5+1,1
1.4034
11,0+0,37
SS
3,6
MS
22,0
MS
22,0
SS
4,0
45,0
MS
18,5
1.4034
22,0
SS
4,0
MS
5,5
SS
0,75
MS
12,5
5,0
SS
2,0
SS
11,0
COATING
1,5
SS
6,8
MS
45,0
MS
45,0
SS
0,75
SS
0,37
COATED
4,0
17,5
SS
17,5
17,5
SS
37,0
10,0
1.4571
18,5
MS
18,5
36,0
SS
4,0
1.4571
30,0
MS
37,0
MS
37,0
MS
30,0
MS
24,0
MS
24,0
MS
24,0
45,0
MS
24,0
MS
24,0
SS
24,0
36,0
36,0
SS
55,0
SS
55,0
SS/MS
37,0
75,0
MS
37,0
MS
44,0
MS
44,0
MS
44,0
SS
15,0
RUBBER LI
5,5
90,0
84,0
58/68
041G192, 1 DYNOMILL, WAB,
type KD-5, stainless steel, 5 ltr.,
Jckt., 11 kW.
066B418, 1 DYNO MILL, WAB,
type KD-5, 5 ltr., Jckt., 12,5 kW.
056E208, 1 DYNO MILL, WAB,
type KD-25, 25 ltr., Jckt., 30 kW.
005F011, 1 DYNO MILL, WAB,
type KD-60, 60 ltr., Jckt.,
44 kW.
120X674, 1 VERTICAL SAND
MILL, VMA-GETZMANN, type
5, 2,2 kW.
016G046, 1 VERTICAL SAND
MILL, SUSSMEYER, stainless
steel, 1 ltr., Jckt., 0,55 kW.
021G079, 1 HORIZONTAL
SAND MILL, NETZSCH, type
LMZ-25, 25 ltr., Jckt., 37 kW.
011X129, 1 HORIZONTAL
SAND MILL, NETZSCH, type
LME 200K, 235 ltr., Jckt.,
58,0/68,0 kW.
016G043, 1 COBALL
MILL, FRYMA, type
MSZ-12, Jckt., 3 kW.
Barneveld
The Netherlands
-
070C324, 1 COBALL
MILL, FRYMA, type
MSM-12, Jckt., 3 kW.
028A127, 1 COBALL
MILL, FRYMA, MS-18,
Jckt., 7,5 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
087B539, 1 COBALL
MILL, FRYMA, type
MS-32, stainless steel,
3,4 ltr., 22 kW.
060E224, 1 COBALL
MILL, FRYMA, type
MS-32, 22 kW.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
11
SCREW PRESSES
PELLETISERS/ROLL COMPACTORS
068E252 FREUND ROLL
COMPACTOR, type TF-mini
roller compactor, roll dia.
100x25 mm.
052E221 ALEXANDERWERK
ROLL COMPACTOR, type
WP-150, roll dia. 150x120 mm,
rolls can be cooled.
067E245 ALEXANDERWERK
ROLL COMPACTOR, type
WP-50 N/75, roll Dia. 150x75 mm.
– RECONDITIONED –
006A095, PONNDORF KASSEL SCREW DE-WATERING PRESS,
type 402S, screw dia. 240 mm, motor 7,5 kW. – RECONDITIONED –
021F060 ALEXANDERWERK ROLL COMPACTOR, type
WP-150x120V, roll dia. 150x120 mm, with pin breaker and 2 granulators – RECONDITIONED –
009E044 ALEXANDERWERK
ROLL COMPACTOR, type
WP-150, roll dia. 150x120 mm
– RECONDITIONED –
031A171, ALEXANDERWERK
MOIST GRANULATOR WITH
GRANULATING SIEVE, type
GA65/RSA, with 7 dies.
067F315 VETTER/ANHYDRO KASSEL DE-WATERING PRESS,
type Vetter CV, screw dia. 250-150 mm, screw length 1500 mm,
stainles ssteel – RECONDITIONED –
059E219 SCHLÜTER MASCHINENFABRIK RING DIE EXTRUDER,
type PP-200, stainless steel, motor 6,8 kW.
101Y726 HAENDLE SCREW PRESS, type EDR 21-A, stainless
steel, twin screw, screw dia. 210 mm, jacket, built in 2000, motor
22 kW.
042B299 KÖLLEMANN COMPACTING AND DE-WATERING
SCREW, stainless steel, motor 15 kW, built in 2006.
065E267 ALEXANDERWERK
ROLL COMPACTOR, type
WP-50, roll dia. 150x50 mm.
SCRAPED SURFACE HEAT EXCHANGERS
043G199 ALFA LAVAL SCRAPED SURFACE HEAT EXCHANGERS (2 pieces in 1 frame), type Contherm 6x9, heating surface 2x
0,836 m2.
068F351 APV PASILAC A/S SCRAPED SURFACE HEAT
EXCHANGER, type SSHE 1 HEXHD-672, heating surface 0,84 m2.
069F389 GERSTENBERG & AGGER A/S SCRAPED SURFACE
HEAT EXCHANGER, type Consistator 3090-S, heating surface
1,0 m2.
SPHERONIZERS
061G280 NARA MACHINERY HYBRIDIZATION SYSTEM, type
NHS-3, stainless steel, with filter, Jacketed.
A. Foeth b.v.
-
101Y723 GLATT SPHERONIZER, type P-140, disc dia. 1400 mm,
stainless steel (1.4571), built in 2000, 3 pieces available.
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
090Y679 GLATT SPHERONIZER, type P-180, disc dia. 1800 mm,
stainless steel (316L), built 2001, with switchgear.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
12
NUTSCHE FILTERS
Partnr.
022C054
029G103
029G105
098F493
029G102
074S263
029G100
029G099
091F466
069C510
041G196
011B205
015A081
133X767
007C015
053T220
123X732
058F283
071E284
044U254
047U528
029G110
050C542
047U529
060C277
007X508
001B018
085X493
081R360
029G096
026F096
008Y104
074S262
078Z367
024Z175
042F196
054E247
100P664
028Y276
013X084
075B450
082C469
Make
SEITZ ENZINGER NOLL
SPARKLER USA
SPARKLER USA
ROSENMUND VTA
ROSENMUND AG
SEITZ WEGA
SEITZ WERKE
SEITZ WERKE
GUEDU
SCHENK FILTERBAU
EUROFILTEC
SEITZ ENZINGER NOLL
SEITZ WERKE GMBH
SEITZ WERKE
SEITZ-WERKE GMBH
FILTROBA TECHNIK AG
W. STÖCKLIN
SEITZ ENZINGR
KÜHNI AG
FILTROBA AG
SEITZ
3V COGEIM
APACO A.G.
SEITZ
SEITZ
SEITZ WERKE BAD
DIDIER FILTERTECHNIK
SEITZ ENZINGER NOLL
SEITZ ENZINGER NOLL
JENS OLSEN
SCHENK/EKATO
ROSENMUND AG
SEITZ
GIOVANOLA S.A.
ROSENMUND AG
BACHILLER
SEITZ ENZINGER
DIDIER FILTERTECHNIK
SEITZ ENZINGER NOLL
ROSENMUND
COMBER SPA COLZATE
A. MEILI S.A. BEX
Type
Surface(M2)
WEGA EFT 30/50
0,1
14" Nutsche
0,1
8-6 Nutsche
0,1
RSD 0,1
0,1
RSD 0,06
0,1
EFT 30.52
0,1
EF30/30 CW
0,1
EF 30/30 CW
0,1
FILTRE PILOT`
0,2
PEF-450/120
0,2
Monoplaque 550
0,2
TERRA EFT-45
0,2
EF60/120 CW
0,3
EF 60/120 CW
0,3
EFT 60/180 CW
0,3
Schraubenfilter
0,3
0,3
EFA 60/125
0,3
0,3
Schraubenfilter
0,3
EF60/120C
0,3
FPP-030
0,3
FILTER 600
0,3
EF60/120C
0,3
EF60/120 CW
0,3
EF60/120CW
0,3
3.57-80-300/HZ
0,5
EFA 80/320 CWIF
0,5
EF 80/350
0,5
Filter torre
0,5
ESF 800/300 RZ
0,5
RND 0,6-262-81
0,6
EFR 100.500
0,6
0,8
RND 1-131-74
1,0
ucha FNB-1
1,0
EFT-125 PHARMA
1,1
DN 1200
1,1
EFR 125/1500 CW
1,1
RND 4-118-72
4,0
PF-5000
4,5
6,0
Material
Motor(KW)
1.4439
HYDRAULIC
316
316
Hastelloy
4,0
1.4404
3,0
SS
0,6/0,75
1.4401
1.4401
Hastelloy
2,2
1.4401
2,2
SS
1,1
1.4571
0,7
1.4401
1.4571
1.4571
3,0/5,2
SS
3,0
SS
1.4571
1.4435
1.4435
3,0
1.4401
316
HYDR.
1.4435
1.4401
1.4401
1.4401
1.4571
1.4571
1.4571
4,0
1.4404
1.4571
5,5
1.4435
HYDR
1.4571
13,2
1.4435
HYDRAULIC
Hastelloy
2,5
Hast. C22
7,5
1.4404
18,5
1.4571
1.4539
3,6/5,3
1.4435
2X 6,8
1.4539
HYDR.DRIV
1.4541
24,0
054E247 SEITZ
ENZINGER NOLL
NUTSCHE FILTER/
DRYER, type Wega
EFT-125, pharma steril-ausführung, filter
surface 1,1 m2, stainless steel (1.4404).
042F196 BACHILLER S.A. BARCELONA NUTSCHE FILTER, type
Nucha filter dryer FNB-1, filter surface 1,0 m2. Contact parts in
Hastelloy C-22
VACUUM BELT FILTERS
011B205 SEITZ ENZINGER
NOLL NUTSCHE FILTER, type
Terra EFR-45, filter surface.
0,16 m2, stainless steel (1.4571).
071U566 PANNEVIS GAS TIGHT VACUUM BELT FILTER, type RT
0,48 x 5,6 m, filter surface 2,7 m2.
068G305 BHS SONTHOFEN VACUUM BELT FILTER, type BF 100065, filter surface 6,5 m2, contact parts in polypropylene, complete
line with vacuum pump and controls. – FILTER HAS NEVER BEEN
USED –
091F466 GUEDU NUTSCHE FILTER, type Filtre Pilot, filter surface
0,17 m2, contact parts in Hastelloy Execution.
075B450 COMBER NUTSCHE FILTER, type PF-5000, filter surface
4,5 m2, stainless steel (1.4539=904L high alloy austenitic), vessel
capacity 7200 ltr.. – RECONDITIONED –
069C510 SCHENK FILTERBAU
NUTSCHE FILTER, type PEF
450/120 ’Prozess-EinschichtsFilter, filter surface 0,15 m2,
stainless steel (1.4401).
029G110 3V COGEIM NUTSCHE FILTER/DRYER, type FPP-030,
filter surface 0,3 m2, stainless steel (316), vessel capacity 310 ltr.,
hydraulic driven.
FILTER PRESSES
FILTERPRESSES
Partnr.
058N254
069F421
072C317
188P134
058W240
054C258
023C102
050C545
002F002
003E006
023C097
068G302
017C110
169P802
068G301
068G300
118K372
068G299
169P803
Surface(M2)
0,4
0,5
SCHENK FILTERBAU
KFP 470/10
1,5
LAROX
PF 2,5 A1
2,5
FILTRI DIEMME
F-500 KE
2,6
SEITZ WERKE
ORION 14
3,0
SCHENK
4,0
BHS SONTHOFEN GMBH AUTOPRESS 500
4,7
SEITZ WERKE
Orion 60A60
5,0
RITTERSHAUS
HPL-50
6,4
BECO FILTERTECHNIK INTEGRA-4000
6,7
FILOX GMBH
KF063.020-030
11,9
HOESCH & SÖHNE
616/07 K20
20,0
HOLSTEIN+KAPPERT
GETRA 1000
62,0
FILOX GMBH
KF100.050-060
78,1
FILOX GMBH
KF100.050-060
78,1
RITTERSHAUS
AEHIS 800
100,0
FILOX GMBH
KF100.070-074
117,3
HOLSTEIN+KAPPERT
GETRA 1000
133,0
Make
KRUPP
Type
HFP03.6
Material Pressure(Bar)
50,0
PP
PP
SS
12
PP
15
SS/PP
SS
1.4404
SS
PP
15
1.4435
6
Polypropy
16
PP
15
SS
Polypropy
16
Polypropy
16
PP
15
Polypropy
16
SS
050C545 BHS SONTHOFEN, type autopress AP-500, filter surface
4,7 m2, stainless steel (1.4404), from 2005.
A. Foeth b.v.
-
023C097 BECO FILTERTECHNIK FILTER PRESS, type
Integra-4000, filter surface 6,7 m2, stainless steel (1.4435), cake
capacity 47,5 ltr.
068G302 FILOX CHAMBER FILTER PRESS, type KF063.020,
polypropylane plates, filter surface 11,9 m2. – FILTER HAS NEVER
BEEN USED –
068G301 FILOX CHAMBER FILTER PRESS, type KF 100.050,
polypropylene plates, filter surface 78,1 m2. – FILTER HAS NEVER
BEEN USED –
068G299, FILOX CHAMBER FILTER PRESS, type KF 100.070,
polypropylene plates, filter surface 117,3 mn2, with Abel pump.
– FILTER HAS NEVER BEEN USED –
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
13
ROTATING VACUUM FILTERS
Partnr.
049U342
020G069
014X083
044G180
015E073
081B448
030F133
052F265
024C144
024C157
Make
KRAUSS MAFFEI
VELO SPA ITALY
SCHENK FILTERBAU
DORR OLIVER
SEITZ WERKE GMBH
SEITZ ENZINGER NOLL
DELLA TOFFOLA
SEITZ ENZINGER
TMCI PADOVAN SPA
TMCI PADOVAN SPA
Type
Surface(M2)
0,25 M2
0,3
FRP 2,5
2,5
VDF-6M2 HW
6,0
Combibloc
6,0
VACUBLOC
6,0
VACUBLOC
8,0
Filtro EC-10
9,0
Vacubloc 12 M2
12,0
TAYLO 50
50,0
TAYLO 50
50,0
020G069, VELO ROTATING
VACUUM FILTER, type FRP 2,5,
filter surface 2,5 m2.
030F133 DELLA TOFFOLA
ROTATING VACUUM FILTER,
type EC-10, filter surface 9,0 m2,
stainless steel 316.
PEELING CENTRIFUGES
Material
SS/PE
SS
304
SS
304
304
316
SS
304
304
Motor(KW)
0,25
0,55
0,25
0,18
0,75
0,75
0,75
3,0
3,0
Partnr.
026F086
001A023
085X518
001B020
042F191
071E300
031X141
Make
KRAUSS MAFFEI
KRAUSS MAFFEI
KRAUSS MAFFEI
KRAUSS MAFFEI
ELLERWERK
KRAUSS MAFFEI
HEINE ZENTRIFUGEN
Type
HZ-630 PH
HZ-63
HZ-630-PH
HZ-63 SI
934-H
HZ-80/1 SI
416
Dia.(mm)
630
630
630
630
650
800
1600
BASKET CENTRIFUGES
Material
Motor(KW)
HASTELLOY
22,0
1.4571
HYDRAULIC
HASTELLOY
18,5
1.4571
HYDR. DR.
COATED
7,5
1.4571
37,0
1.4571
75,0
Partnr.
013X039
071F406
034E124
098F494
042F190
069C511
088F461
110S495
026F093
041G195
085X542
085X520
071F407
004Y027
012R039
043R201
037E123
071E291
071E293
013U050
071U491
071E298
106T689
085X519
040G124
071E299
050C334
085X568
007X786
007X397
117W596
Make
HEINKEL
FIMA PROCESS
GFT TRENNTECHNIK
ELLERWERK
ELLERWERK
GFT TRENNTECHNIK
CEPA CARL PADBE
ELLERWERK
ELLERWERK HAMBU
ELLERWERK
HEINKEL
HEINKEL
ELLERWERK
ELLERWERK
ALA
ELLERWERK
ROUSSELET FRANCE
FERRUM AG
FERRUM AG
FERRUM AG
FERRUM AG
FERRUM AG
FERRUM AG
ELLERWERK
ELLERWERK
FERRUM AG
FERRUM AG
ELLERWERK
KRAUSS MAFFEI
ALFA LAVAL
KRAUSS MAFFEI
Type
Dia.(mm)
HF-300
300
TZT-400X300
400
V-40 0
400
931-L
500
931 L-II
500
V-50 U
500
TZ-5
500
931 L II
500
931-L
500
931 L-II
500
HF-600
600
HF-600
600
733 C-R
630
733 C
630
CPT-630
630
WFZ 630
630
RAPIDE SC 70,3
700
DSZ-O 800
800
DSZ-O 800
800
DSZ-OR 800
800
POT-1000
1000
dsz-O 1000
1000
POR-1000
1000
735-C
1000
735-CR
100
pu 1200/600
1200
PUR-1200/600
1200
736-UA
1250
PAZ-1250 H
1250
PAZ-1250 H
1250
VZO-125/2,5
1250
Material
Motor(KW)
1.4571
HYDR
Hastelloy
7,5
1.4404
5,0
1.4539
5,5
SS/COATED
5,5
Hastelloy
5,5
SS
4,0
SS
5,5
SS
4,0
316
5,5
1.4571
22,0
1.4571
22,0
Hastelloy
5,5
SS
HYDR
SS
4,0
Hastelloy
22,0
SS
3,0/4,0
1.4435
5,5
1.4435
5,5
SS/HALAR
5,5
1.4435
6,8
SS/Halar
7,5
1.4435
6,8
1.4571
15,0
Hastelloy
HYDR
SS/HALAR
22,0
1.4435
22,0
1.4439
30,0
1.4571
HYDR
1.4571
HYDR
1.4571
17,0/30,0
081B448 SEITZ ROTATING VACUUM FILTER, type Vacubloc, filter
surface 8 m2, stainless steel (304).
026F086 KRAUSS MAFFEI PEELING CENTRIFUGE, type
HZ-630PH, basket dia. 630 mm, Max loading weight 54 kg, Contact
parts in Hastelloy (2.4602).
071F406 FIMA PROCESS GMBH BASKET CENTRIFUGE/DRYER,
type TZT-400x300, basket dia. 400 mm, contact parts in Hastelloy
(2.4602).
052F265 SEITZ ENZINGER
NOLL ROTATING VACUUM FILTER, type Vacublock Drehfilter,
filter surface 12 m2.
071E300 KRAUSS MAFFEI PEELER CENTRIFUGE, type Horizontal
Schäl-zentrifuge HZ-80/1 si, basket Dia. 800 mm, stainless steel
(1.4571), max. loading weight 103 kg.
024C144 PADOVAN TMCI ROTATING VACUUM FILTER, type Taylo
50, filter surface 50 m2, stainless steel (304), 2 pieces available.
COLLOID MILLS
069C511 GFT BASKET CENTRIFUGE, type V-504, basket
dia. 500 mm, HASTELLOY
EXECUTION.
088F461 CEPA CARL PADBERG
BASKET CENTRIFUGE, type TZ-5,
closed basket, Dia. 500 mm.
098F494 ELLERWERK BASKET CENTRIFUGE, type 913L
Universal Zentrifuge, basket dia.
500 mm, contact parts in 1.4539.
071F407 ELLERWERK BASKET
CENTRIFUGE, type 733 C-R,
basket dia. 630 mm, contact
parts in Hastelloy.
032C141 FERRUM PUSHER CENTRIFUGE, type P-500/2 system
Escher Wyss, basket dia. 410/500 mm, motor 15+22 kW.
PISTON HOMOGENISERS
078F404 FRYMA VACUUM
EMULSIFYING SYSTEM
“DELMIX”, type MZM-VK 7
081F398 FRYMA VACUUM
EMULSIFYING SYSTEM
“DELMIX”, MZM-VK 25.
DECANTERS
046F233 APV GAULIN PISTON
HOMOGENISER, type 192 MC
15-15, max. 1000 bar, 725 ltr./hr.
069F393 FRYMA COLLOID
MILL, type MZ-190/A, stainless
steel, rotor Dia. 190 mm.
073E313 PUC PROBST UND
CLASS COLLOID MILL, type
K-180E, with jacket, motor
37 kW, rotor Dia. 160 mm.
035F144 KORUMA VACUUM DISPERSING & HOMOGENISING
UNIT, type Disho V100/45, vessel capacity 45 ltr.
A. Foeth b.v.
-
046F230 APV SCHRÖDER PISTON HOMOGENISER, type LAB
60/500/2, max. 500 bar, 60 ltr./hr.
Partnr.
075B490
040U250
078B464
017X191
089B545
Make
GEA WESTFALIA
BIRD KHD HUMBOLDT
KHD HUMBOLDT
WESTFALIA SEPARATOR
WESTFALIA SEPARATOR
Type
Capacity(Ltr./Hr.)
SCA 220-02-33
SC-3044
S 2-11
CA 365-010
25000
CA-365-03-00
25000
Material
SS
1.4462
1.4408
SS
Motor(KW)
4,0+15,0
18,5+55,0
20,0
30,0
26,0
SEPARATORS
038G119 WESTFALIA SEPARATOR, type SC-20-06-076, motor
11 kW.
Barneveld
The Netherlands
-
088F464 WESTFALIA SEPARATOR, type CSA 19-06-476.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
075B490 GEA WESTFALIA SEPARATOR AG DECANTER, type
SCA 220-02-33, stainless steel, screw dia. 220/125 mm, built in
1998.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
14
FLUIDBED DRYERS BATCH
030G135 ASS ALUMINIUM SCHWEISSWERK SCHLIEREN CONTINUOUS FLUIDBED DRYER, type FT 5.0-100/538, heating surface
3,0 m2, without fans and heat exchanger.
Partnr.
010A059
015C036
060F311
001A026
036F160
037G121
095B568
005B167
109Z421
095X524
087Y619
013B034
038X263
071Z285
098Z383
055A268
121P613
050F242
050F241
036F157
065M185
021B076
072X409
039B234
113K576
049Z226
062A303
038Y622
090Y683
Make
AEROMATIC
AEROMATIC AG
AEROMATCI FIELD
NIRO AEROMATIC AG
GLATT GMBH
AEROMATIC AG
GLATT
GLATT AG PRATTELN
GLATT GMBH BINZEN
EUROVENT
GLATT
GLATT
GLATT
GLATT GMBH BINZEN
GLATT GMBH BINZEN
AEROMATIC
AEROMATIC
GEA AEROMATIC
GEA AEROMATIC
ALLGAIER WERKE
GLATT
AEROMATIC
GLATT
GLATT GMBH BINZEN
GLATT
GLATT AG PRATTELN
AEROMATIC AG
AEROMATIC
GLATT PROCESS
Type
Capacity(Ltr.)
S-2
STREA-1
2,0
STREA-1
2,0
COMBI COATA 1
2,0
Uni-glatt
2,0
Strea-1
2,0
UNIGLATT
3,0
UNIGLATT
3,0
TR-5
5,0
CPSG-1
6,0
TF-15
15,0
WSG-5
20,0
WSG-5
20,0
GPCG-5 SPEZIAL
22,0
GPCG-5
22,0
S-2
25,0
STR 15
30,0
TSG-2 B5 F4
47,0
TSG-3 B5 F4
50,0
WS-CT-V-R-T-1.0
65,0
WSLD 40
130,0
S-4
210,0
WSG-60
220,0
WURSTER 32”
417,0
WST 120
420,0
WST-CD 120/200
500,0
S-7
790,0
S-8 SPEZ
2100,0
GPCG-1000
5243,0
Material
Motor(KW)
SS
2,2
PLASTIC
0,37
GLASS
0,75
SS/GLASS
1,1
1.4404
1,1
PLASTICS
SS
1,1
SS
1,1
SS
1,1
316
2,2
SS
4,0
SS
2,5
SS
11,0
1.4301
18,5
SS
11,0
SS
3,3
SS
3,0
SS
SS
1.4301
2x 0,3
SS
SS
10,0
SS
15,0
SS
SS
20,0
316
SS
47,0
1.4301
37,0
316L
200,0
PLATE DRYERS
Partnr.
048B330
016A084
080B466
102S440
102S441
Make
BABCOCK-BSH
KRAUSS MAFFEI
KRAUSS MAFFEI
KRAUSS MAFFEI
KRAUSS MAFFEI
Type
T-3/2000
TK-20/5
VTT 20/23
GTT 27/29
GTT 27/29
048B330 BSH-BABCOCK
PLATE DRYER, type Tellertrockner T-3/200, heating surface
7,5 m2.
Surface(M2)
7,5
12,5
57,5
145,0
145,0
Material
SS
1.4571
1.4404
1.4571
1.4571
Motor(KW)
3,0
1,35
4,0
6,8
6,8
102S441 KRAUSS MAFFEI GAS
TIGHT PLATE DRYER, type GTT
27/29, heating surface 145 m2,
stainless steel (1.4435).
FILM EVAPORATOR
094F479 VIBRA FLUIDBED DRYER, type VF 47/8-S-DV, heating
surface 3,76 m2, bed size 4700x800 mm, with fans, heat exchangers
and filter, Conidur plate.
036F156 VIBRA SCHULTHEIS FLUIDBED DRYER, type VF 50/15,
stainless steel (1.4301), surface 6,5 m2, bed size 5000x1500 mm,
Conidur plate, with end dryer DVW-10, with 3 fans, with heat
exchangers.
050F242 GEA AEROMATIC
FIELDER FLUIDBED DRYER,
type TSG-2, complete with heat
exchanger, fan and control cabinet, pan 47 ltr.
050F241 GEA AEROMATIC
FIELDER, type TSG-3, Top
Spray Granulator, pan with “nonsifting gill plate”, pan 123 ltr.
071Z285 GLATT PARTICLE
COATER GRANULATOR,
GPCG-5, pan cap. 22 ltr.,
Stainless steel (1.4301) Electric
heating, with fan.
039B234 GLATT FLUID BED
DRYER, type Wurster 32", pan
capacity 417 ltr., steam heated,
with fan.
Partnr.
168N768
017C109
115S448
001U110
195D865
008F042
017F054
042B291
084F437
092T554
023P093
102S396
041U332
Make
LUWA
LUWA-SMS GMBH
LUWA
CARL CANZLER
LUWA
BUSS-SMS GMBH
BUSS-SMS GMBH
BUSS-SMS GMBH
BUSS-SMS GMBH
LUWA
BUSS-SMS
LUWA AG ZÜRICH
BUSS-SMS
Type
Surface(M2)
KV 40
0,4
LN-0050
0,5
NL 210-1600-10
1,0
1,0
D
1,2
LN-0200
2,0
NLB-0200
2,0
LB-0200
2,0
NLB-0200
2,0
HS-0200
2,0
HS-0350
3,5
MLK4-600SPEZ
5,3
HS-1200
12,0
Material
SS
1.4571
SS
SS
SS 316
SS
1.4572
1.4571
1.4404
SS
1.4404
316
MS/316L
Motor(KW)
3,0
1,25/2,0
1,1
3,0
2,6
3,0
NO MOTOR
3,0
13,5
75,0
18,4
280,0
017C109 LUWA-SMS FILM EVAPORATOR, type LN-0050, heating
surface 0,5 m2, stainless steel (1.4571), with condenser.
017F054 BUSS-SMS FILM EVAPORATOR, type NLB-0200, heating
surface 2 m2, wiper blades, stainless steel (1.4571), year of construction 2003.
036F160 GLATT FLUIDBED
DRYER/GRANULATOR, type
Uni-Glatt, electric heating, stainless steel (1.4404).
038Y622 AEROMATIC FLUID
BED DRYER, type S-8, pan
capacity 2100 ltr., with fan, with
spray arm.
081F396 NIRO ATOMIZER COPENHAGEN CONTINUOUS
FUIDBED DRYER, type Vibro-Fluidizer M77, heating surface
11,0 m2, without fans and heat exchanger.
042B291 BUSS-SMS FILM EVAPORATOR, type LB-200, heating
surface 2 m2, wiper blades, stainless steel (1.4571), with spare rotor.
090Y683 GLATT FLUIDBED DRYER, type CPCG-1000, stainless
steel (316L), pan capacity 5243 ltr., with sprayer, fan (200 kW) and
filters.
036F157 ALLGAIER WERKE “VIBRATION BATCH DRYER”, type
WS-CT-V-R-T-1.00, stainless steel (1.4301), batch size 65 kg, electric
heating, with fan and dust filter.
A. Foeth b.v.
-
Offer us your surplus equipment
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
023C129 RUTZ INDUSTRIEANLAGEN FALLING FILM EVAPORATOR, type DN-400, stainless steel (1.4571), heating surface 12,5 m2.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
15
TRAY DRYERS
DRYING OVENS
050F341 SCHERRER VACUUM TRAY DRYER, heating surface
10 m2, 8 trays each 1250x1000 mm, stainless steel, trays with Halar
coating.
061C294 VÖTSCH TRAY DRYER, type NTW-100/150, heating surface 10 m2, 11 trays each 950x980 mm, with oil heater.
Partnr.
026E105
053P250
050B342
010Z049
069P338
044F208
044F204
044F206
044F205
045R142
044B259
044B258
075F382
056F372
040F258
119E566
056F375
053P223
101R448
044B254
044F200
096I331
088N403
075F381
019Y152
050F250
004F006
056F373
009B030
044F197
047F221
016G050
018X222
002E003
053P217
024X126
050F237
050F236
044B253
044B263
079B441
079B442
046C160
077C364
050F238
106Z375
060X712
063B350
050A271
036A191
036A192
Make
EVANS LTD LEEDS
WOLFGANG KOHNLE
HORN GMBH
HERAEUS VÖTSCH
HERAEUS
NABERTHERM
NABERTHERM
NABERTHERM
NABERTHERM
HERAEUS
NABERTHERM
NABERTHERM
HERAEUS/KENDRO
GALLENKAMP UK
NARCO
GEMCO
HEAERUS
GERHARD ROHDE
GRASSO
NABERTHERM
NABERTHERM
HOLY
Type
Capacity(Ltr.)
Zinc cricible
VWO 600-60
FASSHEIZER
Umluftofen
MR-170
4,0
N-11/R
11,0
N-11/R
11,0
N-11/R
11,0
N-11/HR
11,0
KM-260
18,0
N-20/HR
20,0
N-20/H
20,0
VT-6025
25,0
OVA 031.XX 1.5
25,0
36,0
50,0
T-6060
50,0
KG 26 80
50,0
Buigoven
50,0
N-60/HR
60,0
LH-60/14
60,0
TL 1.99/20/120
75,0
100,0
HERAEUS HANAU
BTR-5050
125,0
WTB BINDER
140,0
SALVIS RENGGLI
TKL/G 154
140,0
VOETSCH GMBH
NTU 60/40/60
144,0
HEAEUS
T-5060 E
200,0
GALLENKAMP UK
Incubator 200
200,0
ROHDE GMBH
KE-250 S
250,0
BRABENDER
KSW 251/40 H
250,00
VÖTSCH GMBH
EFU 60/60
250,0
GRIEVE CORPORATION HX-500
295,0
B-6420
400,0
HERAEUS HANAU
SCHWARZ
SLO 8/15/-1
724,0
GEMCO
CFR 100/145/50
725,0
GLATT PRATTELN
GHT-200
900,0
GLATT PRATTELN
GHT-200
900,0
NABERTHERM
W-1000/H
1000,0
NABERTHERM
W-1000/H
1000,0
LYTZEN DENMARK
C
1000,0
LYTZEN DENMARK
C
1000,0
HERAEUS HANAU
STUF-D
1500,0
LYTZEN A/S HERLEV
E-1500
1650,0
GLATT PRATTELN
GHT-400
1800,0
LB BOHLE ENNIGERLOH LS-30
1800,0
HERMANN WALDNER
HC-15.2 N
1885,0
HERMANN WALDNER
HW 15/2 N
2300,0
D.O.S. DUTCH OVEN
2500,0
LYTZEN DENMARK
3000,0
LYTZEN HERLEV
H-1
3000,0
075F382 HERAEUS/KENDRO
VACUUM DRYING OVEN, type
VT-6025, max. 200 ºC, capacity
25 ltr.
Material
304
1.4301
SS
SS
MS
SS
MS
MS
SS/ALU
Copper
SS
1.4301
SS
SS
SS
MS
SS
SS
1.4301
1.4301
SS
SS
SS
SS
1.4301
1.4301
1.4571
SS
MS
SS
SS
Temp.(ºC.)
600
200
250
1000
1100
1100
1100
1100
1150
1340
1340
200
200
120
850
250
1100
500
1340
1400
140
300
180
180
90
400
250
110
1320
–40/+180
500
204
70
1100
1200
100
100
1340
1340
300
300
230
063B350 HERMANN WALDNER DRYING OVEN, type HW15/2,
capacity 2300 ltr., steam heated, with 30 product containers.
100
100,0
130
200
200
044F197 ROHDE DRYING
OVEN, type KE-250, max.
1320 ºC, cap. 250 ltr.
050F238 GLATT DRYING OVEN, type GHT-400 “Glatt Horden
Trockner”, stainless steel (1.4301), capacity 2x900 ltr., steam heated,
with 2 racks.
EVAPORATOR
023G095 BÜCHI ROTAVAPOR, type R-187 Ex,
capacity 50 ltr., with condensor and 2 receiving
flasks.
049E168 PINK VACUUM TRAY DRYER, type VSD 850-950-200-5,
heating surface 4 m2, with oil heater, stainless steel (1.4571), 5 trays
each 900x940 mm.
026F087 MVG WERTHEIM
VACUUM TRAY DRYER, heating surface 14 m2, stainless
steel (1.4571), 13 trays, each
1085x1000 mm.
004F006 VÖTSCH DRYING
OVEN type NTU 60/40/60-SGMP, max. 400ºC, capacity
144 ltr., electric heating, 21,6 kW.
050F237 GLATT DRYING OVEN,
type GHT-200, capacity 900 ltr.,
steam heated, max. 100 ºC.
044B253 NABERTHERM DRYING OVEN, type W-1000h, max. temperature, 1340 ºC capacity 1000 ltr., electric heating (75 kW).
084B497 VOMATEC CONTINUOUS COOKER, type Vomadiss 100
Pilot Plant (5x stirring vessel, 1x pre-mix vessel and 40 ltr. flash cooler).
CENTRIFUGAL DRYER
ROTATING DRUM DRYER
FREEZE DRYER
085C497 CHRIST GEFRIERTROCKNUNGSANLAGEN FREEZE
DRYER, type 116001 Epsilon 2-90, cooling surface 8,1 m2.
A. Foeth b.v.
-
079B441 LYTZEN DRYING
OVEN, type C, max. 300 ºC,
capacity 1000 ltr., electric heating
(18 kW).
004B190 BKG BRUCKMANN & KREYENBORG CENTRIFUGAL
DRYER, with tempered water system, type TWE A-2000.
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
085C496 LENTON THERMAL DESIGNS, type Rotating tube furnace, built in 2006, drum in Haynes-HR160, Dia. 180x3600 mm,
max. 1000ºC, electric heating (15 kW).
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
16
PADDLE DRYERS
068G310 CONTINUOUS DRYER/SPIRAL ELEVATOR MAKE JÖST
DÜLMEN, type WUFS 600/1400, stainless steel (1.4301), jacket
(5 bar). HAS NEVER BEEN USED
036E163 DRAIS PADDLE DRYER, type T-50
FM1, stainless steel (1.4541), capacity 50 ltr.,
with chopper, with GWK oil heater.
001B016 LÖDIGE PADDLE DRYER,
type Druvatherm DVT-130, stainless steel
(1.4571), capacity 130 ltr., with chopper
– RECONDITONED –.
017A108 BETHLEHEM CORP. “PORCUPINE PROCESSOR” CONTINUOUS PADDLE DRYER, type 1P-3018-JTC, heating surface
8,7 m2, motor 30 kW, – RECONDITIONED –.
004Y032 RINIKER/GLATT PADDLE DRYER, type V-CCT-K400,
capacity 400 ltr., stainless steel (1.4571), shaft can be heated, motor
11 kW.
101Y787 BUS-SMS ’ROVACTOR’ DISC SEGMENTS DRYER, type
NCE-3800-CD/CF, stainless steel (1.4571), cap. 3950 ltr., heated shaft,
jacket (16 bar), max. temperature 250 ºC + heating surface ± 40 m2.
090B548 LÖDIGE PADDLE DRYER, type VT-2000, stainless steel
(1.4571), jacket (6 bar), capacity 2000 ltr., motor 45 kW.
VERTICAL PROCESS DRYERS
053F255 LITTLEFORD DAY PLOUGH
SHARE DRYER, type FM-130D, useful
capacity 85 ltr., jacket 5 bar, stainless steel
(304).
028Y275 DRAIS VACUUM PADDLE DRYER, type HT-160, stainless
steel (1.4571), easy clean, capacity 160 ltr., motor 12 kW.
016A123 LÖDIGE PADDLE DRYER, type Druvatherm
DVT-6300, capacity 6300 ltr., vac./6 bar, stainless steel (1.4571)
– RECONDITIONED –.
PLEASE READ
Since we buy, sell and change listings daily, all items listed are subject to prior sale, withdrawal, or other disposition. And, while we
strive for complete accuracy, we cannot be responsible for errors or omissions in equipment, discriptions, typographical errors etc.
050C391 MORITZ
TURBO SPHERE
DRYER, type TSI2000, stainless
steel, with jacket,
motor 70 kW, with
chopper.
064B355 EKATO VERTICAL PROCESS DRYER, type VST-2000,
built in 2004, – HASTELLOY EXECUTION – useful capacity 6252070 ltr., ”Vertikal –Schüttgut – Trockner”.
050C423 EKATO VERTICAL PROCESS DRYER, type VPT-2500,
stainless steel (1.4404), useful capacity 625-2500 ltr., with filter.
A. Foeth b.v.
-
045C405 FORBERG TWIN SHAFT PADDLE DRYER, type F-1000,
capacity 1000 ltr., stainless steel (316), RECONDITONED.
006E029 HAAGEN&RINAU, type
HRT-160, paddle dryer, capacity
100 ltr., stainless steel.
Barneveld
The Netherlands
-
042B311 KÖLLEMANN 4-SHAFT SCREW DRYER, type AJK-QTHSF-DN600 Schneckenwärme
tauscher, built in 2004, stainless steel (304), 2 pieces available, motor 15 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
17
COATING PANS
050F248 VECTOR CORPORATION COATING SYSTEM, type LDCS-20/30 Hi-coater,
with 2 interchangable drums.
015F355 WALTER BRUCKS COATING
PAN, type X, pan dia. 1600 mm, batch size
250 kg.
050F247 GLATT AG DRUM COATER, type GC-470/550/600/750
(4 interchangable drums), with fan, air filter and control cabinet.
016E058 WALTER BRUCKS COATING
PAN, type 7, with fan and electric heating,
pan dia. 640 mm.
017G038 GLATT DRUM COATER COMBINATION, type GC 750 +
GC 400.
047W253 DRIAM DRUM COATER, type Driacoater 1200, batch size
max. 120 kg., with syrup supply system, drum dia. 1200 mm.
CONTINUOUS REACTORS
043E201 HÜTTLIN FILM COATING LINE, type Butterfly HB-750,
drum dia. 2070 mm, electric heating, batch size 200-600 kg, with fan
and filters.
STAINLESS STEEL STORAGE TANKS/SILO'S
039E134 BÄUCHLE HORIZONTAL TANK with
jacket, stainless steel (1.4571), capacity 7500 ltr.
062Y365 IKA-JANKE & KUNKEL DISPAX REACTOR, type DRS 2-10, rotor Dia. 65 mm, motor
15,0 kW.
071E294 YSTRAL/MESH AG POWDER WETTING
LINE, type Conti TDS-4, suspensionsanlage 630 ltr.,
motor 24 kW, with TFD-7 mixer.
CANDLE FILTERS
071E296 DE DIETRICH VERTICAL PRESSURE
TANK, glass lined, capacity 2530 ltr., vac./6 bar.
016F159
HOLVRIEKANIROTA
CLOSED VERTICAL TANK,
capacity 14.000
ltr., stainless
steel (1.4301).
023C212 OKKN BÜRSTADT VERTICAL PRESSURE TANK, stainless steel (1.4571), capacity
4000 ltr., vac./2,5 bar.
VARIOUS PACKAGING MACHINERY
056G227 GAF FILTER BAG FILTER, type RB-4BS, 4 candles,
filter surface 0,5 m2, stainless
steel.
090F475 HOSOKAWA MICRON
EUROPE CANDLE FILTER
WITH ROTARY VALVE, filter surface 2,5 m2, stainless steel.
068F352
SIMA
ROTATING
PISTON
FILLER, type
PFP-06 + can
seamer, type
2000/1, dosing max. 2500
ml, capacity
15 cans per
minnute.
095F522 FTJ FILTER TECHNIK
JÄGER, type BG-0402 DH,
4 candles, filter surface 1,5 m2,
stainless steel.
DE-AERATORS
049E170 WÜRSCHUM PISTON
FILLER, type Abfüllanlage
PA-6000, dosing 600-6000 ML.
AERATING SYSTEMS
098W479 FRYMA VACUUM DE-AERATOR, type
LVE/C.
A. Foeth b.v.
-
018X238 KORUMA VACUUM DE-AERATOR,
type ERV-4, capacity 1500-3500 ltr./Hr, centrifugal
disc.
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
115Z441 MONDOMIX LABORATORY AERATOR, Type A-05
mini compact,
capacity 5-45
Kg/Hr.
097A495 MONDOMIX LABORATORY AERATOR
SYSTEM, type
E-50 capacity
750-3000 Kg/Hr.,
built in 2002.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
18
SPRAY DRYERS
CONICAL DRYERS
017G080 GEA NIRO A/S SPRAY DRYER, type Mobile Minor, component size 0,8, with rotary-co-current two-fluid and 3rd fountain
nozzle, electric heating, with adsorber.
036E161 BOLZ CONICAL RIBBON DRYER, type ML-0015,
capacity 25 ltr., contact parts in
HASTELLOY.
012E079 VRIECO CONICAL
DRYER, type VB-01, capacity 83 ltr., stainless steel
(1.4571), electric heating
– RECONDITIONED –.
045B217 BOLZ CONICAL DRYER, type MF-100, capacity 1000 ltr.,
stainless steel (1.4571), cantilevered screw – RECONDITIONED –
065E265 & 065E266 ROTARY
ATOMISER FOR SPRAY
DRYER, make Niro Atomizer
Denmark, Type F-60 BBE16,
atomiser Dia. 210 mm, motor
44 kW, 2 pieces available.
Machinehandel A. Foeth B.V.
dealers in used process
equipment since 1908!
117W586 VRIECO CONICAL DRYER, type S-70 KB-s, capacity
7000 ltr, stainless steel (1.4401) with filter. – RECONDITIONED –
091F525 VRIECO CONICAL DRYER, type 20 VB-S, stainless
steel (316), capacity 2000 ltr., vac./6 bar, cantilevered screw.
– RECONDITIONED –
AUTO CLAVES
COOLING BELT
073R318 SANDVIK COOLING BELT, Belt dimensions 1500x7500 mm.
046F232 STOCK STERILISATIONS TECHNIK “FULL WATER
IMMERSION ROTARY RETORT”, type Pilot 900, Dia. 900x600 mm,
carbon steel.
ROLL DRYERS
022E089 HERMANN STOCK ROTARY AUTOCLAVE, type
Rotorzwerg, carbon steel, electric heating, Dia. 395x430 mm.
TUMBLER DRYERS
079C354 GMF GOUDSCHE
MACHINE FABRIEK ROLL
COOLER/FLAKER, type KBO
5/5, single roll, surface 0,785 m2.
Partnr.
054S182
095T577
005T159
050F334
050C396
018W114
106T686
017U147
040B265
093X473
055G296
010F038
120S472
120S473
040G133
091F527
006X013
006X014
016A189
044U272
067B419
178P855
093Z368
Make
PATTERSON & KELLEY
ZONDERVAN
WALTER STÖCKLIN
DE DIETRICH
EDAK AG DACHSEN
APEX
SCHWELMER EISEN
ALB. KLEIN
KLEIN GMBH
DE DIETRICH
ITALVACUUM
ITALVACUUM
ENGELSMANN
ENGELSMANN
DE DIETRICH
DE DIETRICH
DE DIETRICH
DE DIETRICH
PFAUDLER-WERKE
PFAUDLER
OLSA
PFAUDLER
ENGELSMANN
Type
Capacity(Ltr.)
11,0
100,0
250,0
SR-250
285,0
500,0
GR 311-565
565,0
TR-800
800,0
1000,0
DKT-1000
1000,0
SR-1000
1040,0
RBGS-3000
1200,0
RBG-2000
2052,0
2070,0
2070,0
SR-2500
2550,0
SR
2550,0
SR-2500
2550,0
SR-2500
2550,0
MT-3000
3180,0
MT-4000
4100,0
ROTOVAC Q11
5615,0
7000,0
TM-10.000
10000,0
Material
SS
SS
SS
GLASS
1.4435
316
GLASS
1.4435
1.4571
GLASS
316
316
SS
SS
Glass
GLASS
GLASS
GLASS
GLASS
GLASS
316L
GLASS
1.4571
Motor(KW)
1,5
0,75
0,75
0,75
2x 11,0
3,0
1,5
2,0
3,0
0,47/095
3,0
1,5
4,0
1,5
0,55
0,55
7,5
12,0
7,5
1,5
22,0
050F334 DE DIETRICH GLASS LINED DOUBLE CONE TUMBLER
DRYER, type SR-250, capacity 285 ltr., vac./6 bar, motor 0,75 kW, jacket
vac./10 bar.
017C091 SULZER-ESCHER WYSS COOLING DRUM/FLAKER,
type EKO-1890, roll surface 18,95 m2, roll dia. 1500x4000 mm.
A. Foeth b.v.
-
010F038 ITALVACUUM DOUBLE CONE TUMBLER DRYER,
capacity 2052 ltr., stainless steel, (316), with condenser.
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
055G296 ITALVACUUM DOUBLE CONE DRYER WITH 2 CHOPPERS, type RBGS-3000, stainless steel (316), capacity 1200 ltr.
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
19
047F218 WERNER & PFLEIDERER CONTINUA 37/14 TWIN
SCREW EXTRUDER, screw dia. 37 mm, motor 7,6 kW, electric
heating. – RECONDITIONED –
066Z352 BUSS COMPOUNDING SYSTEMS, Co-kneader, type
Eco 46p, with Jacket, motor 11 kW, with PW-50 discharge unit.
042B319 BERSTORFF TWIN SCREW EXTRUDER, type ZE-130R,
screw dia. 150 mm, L/D 10, motor 90 kW.
HOT MIXERS
Partnr.
049C229
016G044
019E087
107Z384
040C135
098W473
017N092
031T112
170D611
040C137
092D318
135P600
029U175
018R054
079B430
049P215
096N449
079B429
079B431
087S299
062F296
049A277
041F169
015U088
021S067
Make
MTI MISCHTECHNIK
THERMO ELECTRON
MTI MISCHTECHNIK
PAPENMEIER
HENSCHEL AG KASSEL
DIOSNA
SPANGENBERG
PAPENMEIER
PAPENMEIER
HENSCHEL GMBH
PAPENMEIER
PAPENMEIER
HIKARI
HENSCHEL
HENSCHEL
THYSSEN HENSCHEL
DIOSNA
THYSSEN HENSCHEL
THYSSEN HENSCHEL
HENSCHEL
MTI MISCHTECHNI
DIOSNA OSNABRÜCK
PAPENMEIER
THYSSEN HENSCHEL
THYSSEN-HENSCHEL
Type
Capacity(Ltr.)
M 1,5
1,5
Prism Pilot 3
2,0
M3
3,0
TGHK-8
8,0
FM-10 L
10,0
R10-A
10,0
SD 20/FT
20,0
TSEH/KGU
35,0
TSEH-KM50
35,0
FM-40
40,0
TSHKV 60/KSU100 60,0
NOSHK 75/90
90,0
D-100
100,0
FM 150 G
150,0
FM-150 D
150,0
FM 200
200,0
R 200
200,0
FM-250 D
250,0
FM-250 MB
250,0
250,0
EM-300B
300,0
R-600 A
600,0
N-TSHK 630/HCC 630,0
FM-1000 E
1000,0
FM 1500
1500,0
Material
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
GLASS
SS
SS
SS
SS
SS
SS
SS
SS
1.4571
SS
SS
Motor(KW)
2,2
1,1
1,5
3,0
2,2
1,6/3,2
1,85
11,0/3,5
11,0/2,2
7,5
13-16/3,2
7,5/9,0
11,0
30,0/34,0
22,0/32,0
37,0
32,0/22,0
36,0/50,0
36,0/50,0
63,0/85,0
11,0
52,0/80,0
145+37
70/110
100/132
Material
SS
1.4541
SS
SS
SS
SS
SS
1.4301
304L
SS
SS
SS
SS
SS
Motor(KW)
15,0+30,0
15,0+5,5
3,0
3,0
4,0
45,0
38,0/46,0
7,5
18,5+5,5
13,0/16,0
13,0/16,0
22,0
37,0
90,0
Material
SS
Motor(KW)
3,0
75,0
Dia.(mm)
120
250
200
Motor(KW)
1,1
15,0
22,0
Dia.(mm)
165
250
400
260
340
400
300
330
800
800
800
1200
Motor(KW)
3,0
4,0
22,0
5,5
18,5
15,0
HYDR.
40,0
NO MOTOR
132,0
155,0
315,0
COLD MIXERS
041F169 PAPENMEIER MASCHINENBAU “PXX COMPOUNDER”,
type N-TSHK-630/HCC-2000, capacity high speed mixer 630 ltr.,
capacity cooling mixer 2000 ltr., motor 115/145 kW.
Partnr.
004U064
004U068
099Y827
040C133
049A278
066Z351
047C207
094F478
044W198
062F294
062F295
053E226
053E227
014F047
Make
THYSSEN HENSCHEL
THYSSEN HENSCHEL
MIXACO
MIXACO GMBH
MIXACO
MIXACO
DIOSNA OSNABRÜCK
GEBR. RUBERG
PRECI-MECA
DIOSNA
DIOSNA
MIXACO
MIXACO
MIXACO
Type
Capacity(Ltr.)
TK/D 250
TK/D 125
7,5
LAB CM-12-DISP
12,0
LAB CM 3-12-D
12,0
CM-50
50,0
CM-150-SM
150,0
R-200 B
200,0
FCM-200 SR
200,0
VL-II 400
400,0
V-400A
400,0
V-400A
400,0
CM-100
800,0
CM-1000 S
800,0
CM-2000 D
1600,0
040C137 HENSCHEL HEATER
MIXER, type FM-40, capacity
40 ltr., stainless steel, Jacket,
motor 7,5 kW.
094F478 RUBERG BARREL
BATCH MIXER, type FCM200 SR, with lump breaker.
016G044 THERMO ELECTRON
HOT MIXER, type Prism Pilot 3,
capacity max. 2,25 ltr., stainless
steel, Jacket.
062F296 MTI MISCHTECHNIK
HOT MIXER, type EM-300B,
capacity 300 ltr., stainless steel,
Jacket, motor 11 kW.
INTERNAL MIXERS
Partnr.
Make
Type
049N155 MEILI
CK 1
007X316 WERNER&PFLEIDERER LH-20
Capacity(Ltr.)
1,0
20,0
PELLETISERS
Partnr.
035G149
170I522
063S235
Make
SCHEER
S. ROCKSTEDT OHG
SCHEER&CIE
Partnr.
063B352
009U020
075B410
032S114
003U028
026N542
103I323
119P524
167K644
038Z214
038Z213
038Z215
Make
PALLMANN
PALLMANN
CONDUX
DREHER
DREHER
TRIA
CONDUX
FELLNER+ZIEGLER
PALLMANN
PALLMANN
PALLMANN KG
PALLMANN KG
Type
SGS 100-E
F 50
HSG400
Width(mm)
50
250
400
GRANULATORS
042E139 LALESSE SINGLE SCREW EXTRUDER, type LA-85,
screw dia. 85 mm, L/D 11, electric heating, motor 30 kW.
Type
Width(mm)
PS-2
105
PS-200/300
300
CS 400/400-IIIA
400
S 26/41 GFS-RS
410
S34/41 GF
410
400/ELR
420
CS300/600-IIEVG
600
SM 3/800
800
PS 8-12
1200
PS 8-12
1200
PS 8-15
1500
PS 12-18
1800
035G148 KRUPP WERNER & PFLEIDERER TWIN SCREW
EXTRUDER, type ZSK-25, screw dia. 25 mm, electric heating,
motor 15 kW.
063B352 PALLMANN GRANULATOR, type PS-2, stainless
steel, rotor dia. 165 mm, motor
3,0 kW.
062F294 DIOSNA OSNABRÜCK UNIVERSAL MIXER, type V-400A,
with jacket and chopper, stainless steel, capacity 400 ltr.
004B190 BKG BRUCKMANN & KREYENBORG CENTRIFUGAL
DRYER, type TWE/A-2000, with tempered water system.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
009U020 PALLMANN GRANULATOR, type PS-200/300, rotor
dia 200 mm, motor 4,0 kW.
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
066Z351 MIXACO CONTAINER MIXER, type CM-150-SM, capacity
150 ltr., Motor 45 kW, built in 2003, 2 pans, stainless steel.
014F047 MIXACO NEUENRADE CONTAINER MIXER, type
CM-2000D, motor 90 kW, capacity 1600 ltr. – RECONDITIONED –
E-mail:
[email protected]
Website: www.foeth.nl
OKTOBER 2014
20
Premises in Barneveld – the Netherlands
with a total area of 32,000 sq.m.
Type
HV
HV
HV
HV
HV
HV
HV
Working Total Cone Diameter Motor Weight
capac- height height (in mm) (kw) (kgs)
ity
(A)
(B)
(C)
50*
50 1222
860
300
300 2415 1530
600
600 2729 1844
1000
1000 3069 2184
1500
1500 3425 2500
2000
2000 3725 2800
3000
3000 4125 3200
* HV 50 Standard with legs
730
1300
1492
1560
1753
1936
2180
0,75
3,0
3,0
3,0
4,0
4,0
5,5
250
600
650
700
800
900
1000
Some additional
information:
Material of construction:
stainless steel 304
Speeds HV50: arm 5 rmp,
screw 85 rpm
Speeds HV200-3000: arm 2 rpm,
screw 60 rpm
All mixers will be offered without
electrical controls and legs with
the exception of the HV50 which is
offered with legs.
A. Foeth b.v.
-
Barneveld
The Netherlands
-
Tel. 0031 (0)342415551
Fax 0031 (0)342417845
E-mail:
[email protected]
Website: www.foeth.nl
Download
Related flashcards
Create Flashcards