column
self-powered
driving
station
SCREW PRESS STATIONS
Model
Max. stroke
mm
Code
Overall dimensions (mm)
length
width
height
Support base
(mm)
Weight
Kg
VIBRATING SCREWS POSITIONING
VICO G A2P
8840019
40
345
320
870
280 x 215
45
VICO G A1M
8840018
130
345
320
870
280 x 215
45
VICO S A2P
8840027
40
345
320
870
280 x 215
45
VICO S A1M
8840028
130
345
320
870
280 x 215
45
TILTING DRAWER SCREWS POSITIONING
BASCO G A2P
8840020
40
595
320
1130
280 x 215
35
BASCO G A1M
8840017
130
595
320
1130
280 x 215
35
BASCO S A2P
8840021
40
595
320
1130
280 x 215
35
BASCO S A1M
8840022
130
595
320
1130
280 x 215
35
PERFORMANCE (according to motors installed, see page 6)
min
max
No load speed rpm330
4200
Torque Nm
1,5
22,8
Power
watt 100480
Air consumption
Nl / cycle
25
36
Max. push KN
425
Other types of heads/selectors are available for different
applications or sizes, see page 6 of this catalogue. For the
correct adjustment ensure that the details of the application are
sent together with at least 1 or 2 Kgs of screws.
Quantity of loadable screws: Kg 1,5
Minimum duration of cycle: approx. 2”
Equipped with PLC able to receive and transmit start and end
cycle signals and to regulate the following parameters:
- Vibration power (Vico)
- Frequency of the tilting (Basco)
- Timed motor arrest at the end of stroke of the unit connected
- Cycle frequency (if in automatic mode)
Power supply:
Air at 6 - 7 bar
Electric 230 V - 50/60 Hz
Conditions required for the screws: the length must be ≥ 2 times the
diametre of the head, the diametre of the shank must be ≤ screw head
diameter -1 mm
“Basco” STATION
“VICO” STATION
The table underneath indicates the size of the screws which are currently used with the normal
series supply:
VICO
BASCO
Ø head
3,5 - 4,2
4 - 5,2
5 - 6,5
6 - 7,2
7 - 8,2
8 - 9,2
9 - 10,4
Length
8 - 25
10 - 25
12 - 25
14 - 25
16 - 25
18 - 40
20 - 40
Ø head
3,5 - 4,2
4 - 5,2
5 - 6,5
6 - 7,2
7 - 8,2
8 - 9,2
9 - 10,4
Length
8 - 25
10 - 25
12 - 25
14 - 25
16 - 25
18 - 25
20 - 40
10 - 11,4 10,5 - 12,5 12 - 13,5
22 - 52
24 - 52
26 - 52
AUTOMATIC SCREWDRIVING MODULAR SYSTEM
2-
Innovation, from experience. With you.
bench and round-column feeders
alx 2s
alx 2svtm
alba
alba vtm
feeders
Model
Code
Overall dimensions
(mm)
length width height
Support base
(mm)
Weight
Kg
FROM BENCH WITH VIBRATING SCREWS POSITIONING
ALX 2S to feed fixed unit
8893018
498
321
343
498 x 321
35
ALX 2SVTM to feed portable screwdrivers
8893017
498
321
343
498 x 321
35
FROM BENCH WITH TILTING DRAWER SCREWS POSITIONING
ALBA to feed fixed unit
8893020
470
321
620*
470 x 321
25
ALBA VTM to feed portable screwdrivers
8893021
470
321
620*
470 x 321
25
COLUMN WITH VIBRATING SCREWS POSITIONING
VICO to feed fixed unit
8840026
345
320
870
280 x 215
38
VICO VTM to feed screwdrivers
8840029
345
320
870
280 x 215
38
PRESS WITH TILTING DRAWER SCREWS POSITIONING
BASCO to feed fixed unit
8840025
595
320
1130
280 x 215
28
BASCO VTM to feed screwdrivers
8840030
595
320
1130
280 x 215
28
basco
basco vtm
* with raised drawer
Dimensions of the screws feedable with the normal series supply (mm):
ALX 2S - ALX 2SVTM - VICO - VICO VTM
head diametre
length
ALBA - ALBA VTM - BASCO - BASCO VTM
head diametre
4 - 10
10 - 13
40
52
4 - 10
length
40
Conditions required for the screws: the length must be ≥ 2 times the diametre of the head, the diametre of the shank
must be ≤ screw head diameter -1 mm
Shank diametre ≤ head diametre minus 1 mm
Special selectors are available for different applications or sizes. THESE CAN BE fed WITH PINS, BUSHES, STUDS. For
the correct adjustment ensure that at least 1 or 2 Kgs of screws are sent.
Quantity of loadable screws: 1,5 Kg.
Minimum duration of cycle approx 2".
equipped with PLC able to receive and transmit start and end cycle signals and to regulate: vibration power (vico),
tiltling frequency (basco), duration of blower, timed motor arrest at end of stroke of connected unit, cycle frequency (if
in automatic mode)
power supplies
air at 6 - 7 bar
electric 230 V - 50/60 Hz
Connections with the screwdrivers or screwdriving systems standard length 4 m (different lengths on request)
VICO
vico vtm
AUTOMATIC SCREWDRIVING MODULAR SYSTEM
Innovation, from experience. With you.
-3
portable screwdrivers with automatic feed
SCREWDRIVERS with MANUAL THRUST FEED
Model
Code
Straight screwdrivers - lever start - SLIP-TRK clutch
VTM ERGOVIT 30D PS-ST
8306626
Straight screwdrivers - lever start - ACCU-TRK clutch
VTM AMI 44 AT-PS
8306623
VTM AMI 66 AT-PS
8306630
VTM ALFB2D AT-PS
8306621
VTM ALGS5D AT-PS
8306624
Gun screwdrivers - button start - ACCU-TRK clutch
VTM ERGOVIT 20 AT-PS
8306625
VTM ERGOVIT 30 AT-PS
8306622
VTM ERGOVIT 50 AT-PS
8306629
No load speed
rpm
Torque
max Nm
Power
Watt
Consumption
air Nl/cycle
Stroke
mm
Overall dimensions
length. mm
Ø mm
800
7,5
220
18
48
375
38
800
500
900
420
2
3,5
3,5
14,6
70
70
190
430
13
13
20
25
48
48
48
48
318
318
395
388
34
34
34
40
2100
800
480
3,5
7,5
7,5
220
220
220
18
18
18
48
48
48
308
324
324
43
43
43
SELF THRUST SCREWDRIVERS (AUTOMATIC INTERNAL PUSH)
Model
Code
No load speed
rpm
Torque
max Nm
Straight - lever start - SLIP-TRK clutch (Auxiliary unit on request for pistol grip)
VITMATIC 44YVS99-EL
8306608
1000
2
VITMATIC 44YVS99-EL
8306607
600
3,5
VITMATIC 2FLVS99-EL
8306602
1000
3,6
VITMATIC 4FLVS01-EL
8306605
400
11,5
VITMATIC 2GCVS99-EL
8306604
2300
3,5
VITMATIC 2GLVS99-EL
8306606
2300
3,5
VITMATIC 3GLVS99-EL
8306603
950
6,3
Straight screwdrivers - lever start - ACCU-TRK clutch
VITMATIC 22YVS-AT
8306701
VITMATIC 44YVS-AT
8306702
VITMATIC 66YVS-AT
8306703
Auxiliary unit for pistol grip on request
7650015
1200
800
500
1,8
2,4
3,7
Power
Watt
Consumption
air Nl/cycle
Stroke
mm
Overall dimensions
length. mm
Ø mm
110
110
190
190
430
430
430
14
14
20
20
25
25
25
47
47
57
57
40
56
56
330
330
358
358
330
378
378
30
30
36
36
36
36
36
110
110
110
14
14
14
47
47
47
368
368
368
35
35
35
All of the models are equipped with electronic limit switch. Sensors for the screw arriving at the head entrance are available on request. The table underneath
indicates the size of the screws which are currently used with the normal screw guide head series supply: Conditions required: length ≥ twice the diametre of the
head. Other types of heads are available for different applications or sizes. For the correct adjustment ensure that a screw sample and the specifics of the application are sent.
Applicable screw sizes (mm)
Nominal
4
5
6
7
8
9
10
11
12
13
head diametre
3,5 - 4,2
4 - 5,2
5 - 6,5
6 - 7,2
7 - 8,2
CIAPPETTO
length
8 - 25
10 - 25
12 - 25 14 - 25 16 - 25
head diametre
4 - 5,2
5 - 6,5
6 - 7,2
7 - 8,2
8 - 9,2
COMPAT
length
10 - 25
12 - 25 14 - 25 16 - 25
18 - 25
head diametre
6 - 7,2
7 - 8,2
TUBO
length
14 - 35 16 - 35
head diametre
5 - 6,5
6 - 7,2
7 - 8,2
8 - 9,2
9 - 10,4 10 - 11,4 10,5 - 12,5 12 - 13,5
MAXI
length
12 - 52 14 - 52 16 - 52
18 - 52
20 - 52
22 - 52
24 - 52
26 - 52
shank diameter
2,5 - 3,5 2,5 - 3,5
2,5 - 4
3 - 4,5
3 - 5,5 4,5 - 6,5 4,5 - 6,5 4,5 - 6,5
4,5 - 6,5
4,5 - 6,5
AUTOMATIC SCREWDRIVING MODULAR SYSTEM
4-
Innovation, from experience. With you.
screwdrivers
with
fixed
automatic
feed
vtm fixed
Model
Code
No load
Torque
speed rpm max Nm
Power
Watt
consumption
air Nl/cycle
total
stroke
mm
KN max
thrust
THRUST AND RETURN WITH INTERNAL PISTON - screw guide head with spring movement - knob with start button
VTM 2GC
8604017
2300
3,5
300
400
40
VTM 2GL
8604018
2300
3,5
300
400
56
VTM 3GL
8604019
950
6,3
300
400
56
Overall dimensions (mm)
length width height
130
130
130
400
465
465
uam cmp
Code
THRUST AND RETURN WITH COAXIAL PISTON
UAM A1M screw guide head with spring movement
UAM A2P screw guide head with piston movement
90
90
90
uam pac
uam at1m
Model
80
80
80
uam a2p
No load
speed rpm
8906062
8604051
Torque
max Nm
Power
Watt
consumption
air Nl/cycle
total stroke
mm
KN max
thrust
130
40
425
425
744
695
110
192
124
124
80
80
260
260
490
490
134
134
115
115
See motors on page 6
THRUST AND RETURN WITH PARALLEL PISTON screw guide head with spring movement
UAM PAC
8906063
See motors on page 6
UAM CMP knob with start button
8906059
Overall dimensions (mm)
length width height
All of the models are equipped with electronic limit switch. Sensors for the screw arriving at the head entrance are available on request. The table underneath indicates the size of the
screws which are currently used with the normal screw guide head series supply: Conditions required: length ≥ twice the diametre of the head. Other types of heads are available for
different applications or sizes. For the correct adjustment ensure that a screw sample and the specifics of the application are sent.
NOTES: THE UAM SCREW DRIVING UNIT CAN BE USED AS SUPPORT FOR THE MOTORS FOR DRIVING
Applicable screw sizes (mm)
Nominal
head diametre
CIAPPETTO
length
head diametre
COMPAT
length
head diametre
TUBO
length
head diametre
MAXI
length
shank diameter
4
3,5 - 4,2
8 - 25
2,5 - 3,5
5
4 - 5,2
10 - 25
4 - 5,2
10 - 25
6
5 - 6,5
12 - 25
5 - 6,5
12 - 25
2,5 - 3,5
5 - 6,5
12 - 52
2,5 - 4
7
6 - 7,2
14 - 25
6 - 7,2
14 - 25
6 - 7,2
14 - 35
6 - 7,2
14 - 52
3 - 4,5
8
7 - 8,2
16 - 25
7 - 8,2
16 - 25
7 - 8,2
16 - 35
7 - 8,2
16 - 52
3 - 5,5
9
10
11
12
13
9 - 10,4
20 - 52
4,5 - 6,5
10 - 11,4
22 - 52
4,5 - 6,5
10,5 - 12,5
24 - 52
4,5 - 6,5
12 - 13,5
26 - 52
4,5 - 6,5
8 - 9,2
18 - 25
8 - 9,2
18 - 52
4,5 - 6,5
AUTOMATIC SCREWDRIVING MODULAR SYSTEM
Innovation, from experience. With you.
-5
motors and components
ALGS-SALGS motors
ALG - SALGS - ACCU-TRK motors
SALGS motors with direct
engagement
“AVEL” electric motors
MOTORS for UAM
Model
Code
No load speed rpm
Nm torque
PNEUMATIC MOTORS With SLIP-TRK clutch for metric screws and medium precision tightening
ALGS2DFR
8604207
2360
ALGS3DFR
8604208
930
ALGS8DFR
8604211
295
SALGS2DFR
8604302
2000
SALGS3DFR
8604303
800
2,6
6,5
20,7
9
22,8
Watt power
Air consumption Nl/cycle
430
430
430
480
480
25
25
25
36
36
PNEUMATIC MOTORS with ACCU-TRK clutch for metric screws and high precision tightening and with driving end pneumatic signal
ALGS2D ACCU-TRK
8604262
2200
3,5
430
ALGS3D ACCU-TRK
8604263
750
7,6
430
ALGS5D ACCU-TRK
8604265
420
14,6
430
ALGS8D ACCU-TRK
8604268
250
14,6
430
SALGS2D ACCU-TRK
8604322
1800
7,6
480
SALGS3D ACCU-TRK
8604323
800
14,6
480
SALGS5D ACCU-TRK
8604324
450
14,6
480
SALGS7D ACCU-TRK
8604325
330
14,6
480
25
25
25
25
36
36
36
36
PNEUMATIC MOTORS with direct stall engagement for self-threading screws, self-drilling, wooden screws
SALGS2D I.D.
8907246
2360
4,6
SALGS3D I.D.
8907264
900
11,7
480
480
25
25
ELECTRIC MOTORS with control panel and electronic torque control
AVEL 5
8308540
AVEL 14
8308541
AVEL 20
8308542
100
100
100
===
===
===
“COMPAT” head
Cross bit POzidriv
Bit for hexagonal
socket
1100
320
140
“ciappetto” head
7
14
25
“max” head
Cross bit philips
Bit torx
“tubo” head
Slotted head bit
Bit holder for UAM
and VITMATIC
AUTOMATIC SCREWDRIVING MODULAR SYSTEM
6-
Innovation, from experience. With you.
some characteristic applications
Metal processing
• Household appliance frames
• Plate fixing
• Control instrument panels
• Profile fixing
• Oleodynamic components
• Motors and motor reducers
• Compressors
Wood and furniture
industry
• Drawers
• Hinges
• Rear panels
• Hardware for windows or frames
• Metal furniture
• Telescopic guide
• Metal seals for doors
• Low plates
Doors and windows
• Closures
• Mechanisms
• Corner supports
• HInge fixing
• Window borders
Electric industry
• Support
• Driving of electronic plates
• Medical equipment
• Card readers
• Dissipators
• Terminals
• Table socket outlets
Plastic industry
• Air conditioning systems
• Motor covers
• Special assembly in composite
Automobile industry
• Handle driving
• Small motors and reducers
• Apparatus for GPL
Head detail with protruding screws
Double driving head
Selector detail
Head detail
AUTOMATIC SCREWDRIVING MODULAR SYSTEM
Innovation, from experience. With you.
-7
Driving demonstration
Two head driving screwdriver
Tilting feeders in line detail
Multiple
screwdriver
with five spindle heads