How to gap spark plugs Look up the specifications This is usually done on Alldata or Mitchell OnDemand. Some type of Manual, Book or Electronic Information Service. Example Spark plug Gap 1.0 - 1.1 mm (0.039-0.043 in) 1.2 - 1.3 mm (0.047-0.051 in) Torque 18 N.m (13 lb.ft) You will need a gapping tool Center & Side Electrode Do not put any Pressure on the Center Electrode Bend only the side Electrode Take the gapping tool and find out what the gap is. Take the gapping tool and find out what the gap is. Wire Gauge Bend the Side Electrode to the proper size. Recheck the gap to make sure it is right. Some spark plugs cannot be gapped. Most new spark plugs should be gapped to the proper specifications right out of the box. The End