DPO/DSA/MSO70000 Series
Tektronix Performance Oscilloscopes
Market Trends
Wideband RF
Technologies
High Speed
Communications
2
Serial Data
Bandwidth
 Carriers seeking more network
capacity in transceiver design
 Meeting demands for more
visibility/information
 Increasing complexity driven by
multiple faster standards
 Small timing margins leading to
new jitter separation methods
 Deploying wideband chirp
technology in advanced radars
 Optical modulation analysis is a
design requirement
 Increase in use of microwave
frequencies for communication
links
 Movement from slower, wide,
parallel to narrow, multi-Gb serial
buses
 Instrument must provide precise
low-noise measurements
 Instrument must provide wider
bandwidth & higher resolution
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
 Faster edges, slew rates are
impacting PCB design
 Instrument must provide wide
bandwidth, fast rise times and
tools for EQ/embedding
Market Trends
Emerging Customer Needs
“…venturing into 12G SAS and
need to precisely characterize
transceiver part rise time
performance….”
“…working on 40GBASE-CR4 today
and eventually 100GBASE-KR
components. The 40 and 100
Gb/s signals are 4 lanes of
10 or 25 Gb/s….”
– SerDes Designer,
Storage Systems Co.
“…need to move to
a higher bandwidth for
this DP-QPSK project and I
need 4 channels of low noise
A to D….”
– Optical Networks Designer,
Telecommunications Mfr.
– Ethernet System Architect,
Semiconductor Mfr.
“…my low-level signals
are 40-50 mVpp and
I need 5 mV vertical
resolution measurements
with low noise….”
– Sr. Hardware Engineer,
Networking Co.
3
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000 Series
Ultra-Performance Oscilloscope Capabilities
Discover
 Accurate signal
 Complex signal
representation
event capture
 Multi-channel
acquisition without
compromises
 Highly visible
waveform content
4
Capture
DPO/DSA/MSO70000 Series
Search
 Easy verification
through millions of
sample points
 Connectivity to
 Long record length
DUT with high
signal fidelity
 Access to decoded
for timing analysis
across clock cycles
serial bus traffic
Copyright © Tektronix
55W-25323-4
Analyze
 Advanced jitter
separation methods
 Accurate Serial Data
compliance tests
 Fast data access for
deeper analysis
DISCOVER
5
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Discover
DPO/DSA/MSO70000 Series Performance Oscilloscopes
The World’s Most Accurate Oscilloscopes
 The industry’s highest sample rate with 33 GHz
bandwidth on 2 or 4 channels
– Supports complete system testing of Differential Data &
Clock measurements specified by leading standards
organizations
 Low noise floor for accurate margin testing
– More margin to allow your test to pass
– Increase your measurement margin with industry’s
lowest jitter noise floor
– Highest sensitivity with 6.25 mV/div
– Enables accurate evaluation of Serial data rates up to
28 Gb/sec
 The MSO70000 is the only performance oscilloscope
capable of debug of today’s fastest digital designs
– Up to 20GHz and 50GS/s on 4 analog channels
simultaneously
– 16 digital channels with 80 psec time resolution
– Ideal for complete system debugging DDR Memory
6
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Discover
FastAcqTM to find elusive, intermittent events
See a World that Others Don’t

DPO/DSA/MSO70000 has the industry’s highest waveform capture rate at up to
300,000 Waveforms per Second
–
–
7
Enabling display of intermittent events that cause elusive failures
FastAcq gets to the root cause of event identification faster than any oscilloscope on the
market
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Discover
DPO/DSA70000D Series

Industry leading
combination of 33 GHz
bandwidth and 100 GS/sec
sample rate
The World’s Most Accurate Oscilloscope
8
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Discover
Technology That Paces The Industry
High reliability and signal fidelity from Tektronix Engineering Excellence

DPO/DSA70000D Series - The most tightly integrated oscilloscope front-end
–
–
–
9
33 GHz and 100 GS/s performance packed in a single multi-chip module
Reduced part count and higher reliability through integration
Utilizes the reliable, fast SiGe 8HP BiCMOS Process from IBM
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Discover
Uncompromised Acquisition – Bandwidth and Sample Rate
Quickly Analyze up to 240Gb Signaling with 4 Channels of Performance

Supports Accurate Complex Optical Modulation Analysis up to 32 Gbaud
–
–
–

33 GHz real-time bandwidth with 100 GS/s on 2 channels
23 GHz real-time bandwidth with 50 GS/s on 4 channels
Low noise for high OSNR capable of 16-QAM Analysis
Enables a complete system view with 4 – 20 Channels of acquisition
– Required for Serial Standards Analysis
• Computer Bus Standards with Differential & Independent Clock Signals
• Display Standards with multiple data lanes
– Memory controller buses requiring logic qualified-triggering
– Evaluate Crosstalk/Timing Skew between channels
Note: PCI Express & DisplayPort logos are trademarked property of PCI-SIG and DisplayPort Alliance
10
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Discover
Robust Support for Today’s HSS Technologies
Achieve compliance on 3rd and 4th Generation Serial Standard Designs
8 Gb/s
 Industry’s Lowest Vertical Noise
– Great signal-to-noise ratio with more margin to
allow your test to pass
– Maximum signal fidelity allows finding the
smallest anomalies that might affect a design’s
performance.
10.3125 Gb/s
 Accurate signal capture for debug & timing
analysis across all 4 channels
– FibreChannel, PCIe 3.0 - 8 Gb/s
• 376fs Random Jitter
– 10G Ethernet – 10.3125 Gb/s
• 386fs Random Jitter
– 40 GbE, 100 GbE - 12.5 Gb/s
• 290fs Random Jitter
11
DPO/DSA/MSO70000 Series
Copyright © Tektronix
12.5 Gb/s
55W-25323-4
CAPTURE
12
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Capture
Pinpoint® Trigger System puts you in control of event capture
The industry’s most comprehensive trigger system

Industry’s only 6.25 Gb/sec Hardware Serial Trigger
with Built-in Bit Error Detection
–
–
–

Accuracy you can trust
–
–
•
13
Speeds root cause analysis of protocol-dependent
events
Supports accurate capture of 3rd Generation Serial
Standards like SAS and PCI Express
Available on any of the 4 channels for versatile use
Accurate <100 ps glitch capture
Trigger jitter 100fsrms (typical)
<100ps glitch capture
1000’s of trigger combinations to find complex events
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Capture
Visual Trigger speeds up challenging event capture
Qualifies events that no other trigger can detect

Fast signals with specific time or voltage variations

Ideal for demanding Serial or Memory Bus Verification
–
–

Separate out a DDR3 data eye in a multi-rank
configuration
Detect 8GB/s bit sequence coming out of an electrical
idle state on a serial bit stream
Visual Trigger Capabilities
–
–
New! Works with Pinpoint Trigger & Advanced
Search/Mark for deeper qualification
• Compatible with B event scan, ASM & enhanced
triggering
• Qualifier equation supports complex boolean logic
Most dynamic trigger system on the market
•
•
•
–
14
Advanced Search/Mark & Visual Trigger
Add/delete/edit vertices with mouse or scope control
Define shapes for visual trigger areas that better match the
waveform shape
Change the area colors to match the waveform color for
easier multi-channel identification
Programmable interface for remote setup/control
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Flexible Visual Trigger mimics waveform
behavior for realistic triggers
Capture
FastFrame™ provides deep insight and efficient memory use
Powerful insight into information you want to see, when you want to see it.

Locate the start of important signal activity and capture only that data into memory
–
–
–

Preserves valuable record length without sacrificing sample point resolution
Automatically save FastFrames for later viewing and analysis
New! 15-20% throughput improvement of wfms/sec in DPO70000D Series
Ideal for RF pulsed signal analysis used in Radar System Design
–
With Signal Vu, use an acquisition trigger to initiate FastFrame capture of pulses and/or
chirps for up to 10,000 pulses
Pulse Histogram in SignalVu
built with FastFrame Acquisition
Intuitive Fast Frame Control Window
15
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Capture
TriMode™ access challenging test points with accuracy
Probe connection challenges solved with TriMode™

Connectivity options with high signal fidelity up to 30
GHz
–
–

A single probe-DUT connection for Serial Data
–

Measurement convenience with probe length of 1.3
meters
Wide variety of connectivity/solder down options
Perform differential and common mode voltage limit
measurements with a single probe point
TriMode™ high-speed circuit access
Flexible Signal Access Solutions for DDR Memory
–
–
Component Interposers
Analog Probing
•
–
CS
CA1
CA2
CAn
DQ, DQS, Clock
Digital Probing
•
Address, Command, Control
DQ0
DQS0
CK
Analog/Digital DIMM Probing
16
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Socketed DDR Component
Interposer
Capture
iCapture™ - One Connection for Analog and Digital
MSO70000 Series – The industry’s only single-probe connection for
analog and digital

Measurement flexibility while preserving signal access

No need to reconfigure probing

Quickly route any digital channel to any analog channel – Simultaneously
–
–
–
See both digital and analog views of the same signal
Validate signal connection and logic threshold
Check signal integrity and improve timing resolution
Digital
Channels
+
-
C
A0
Analog
Channels
17
DPO/DSA/MSO70000 Series
D0
Digital
iCapture
2.5 GHz
Analog
+
-
Full Bandwidth
Analog
+
-
Copyright © Tektronix
55W-25323-4
SEARCH
18
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Search
Advanced Search and Mark (ASM)
Find what you’re looking for .. FAST

ASM Speeds up search through long record
length captures
–
–
–

Highlight important events
Navigate between events of interest effortlessly
Uncover events that are difficult to find in a large
data set
Search & Mark Serial Buses
–
–
Find data patterns and control characters
New! Trigger system enables marking of all like
trigger events in an acquisition
•

Automatically identify Reads and Writes
Make JEDEC conformance measurements with
pass/fail results on every Read and Write burst
Event tables summarize all found events
–
–
–
19
Speeds up verification of long PRBS pattern
Search DDR Read or Write bursts using DDRA
–
–

Event table with navigation capability
Events are time stamped in reference to trigger
Results Table provides a listing view of all traffic
from multiple buses
Table and zoom windows tied together
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
“Mark all events” capability built in
Search
Serial Bus Decoding and Search
Gain deeper insight into your system's behavior

Serial Bus Decode
–
–

Support for Industry Standard Buses
–
20
View control and data packets
Quickly search and find protocol errors or
invalid bus sequences
• Views correlated to analog views
PCI Express, 8b/10b,
I2C, SPI, RS-32/422/485/UART,
MIL-STD-1553B, CAN, LIN, Flexray,
USB, HSIC, 10BASE-T, 100BASE-TX,
10GBASE-KR, and MIPI® D-PHY (DSI and
CSI)
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Search
DPO/DSA/MSO70000 Serial Bus Decoders Available
Aerospace Serial Triggering & Analysis
(opt. SR-AERO)
Bus decode support for the MIL-STD-1553B
Serial Bus
Computer Serial Triggering & Analysis
(opt. SR-COMP)
Bus decode support for RS-232, RS-422,
RS-485 & UART Serial Busses
Embedded Serial Triggering &
Analysis (opt. SR-EMBD)
Bus decode support for I2C & SPI Serial
Busses
Automotive Serial Triggering & Analysis
(opt. SR-AUTO)
Bus decode support for CAN, LIN & Flexray
Serial Busses
MIPI D-PHY Serial Triggering & Analysis
(opt. SR-DPHY)
Bus decode support for MIPI D-PHY (DSI/CSI
interface) Serial Busses
10/100BASE-T Ethernet Serial
Analysis (opt. SR-ENET)
Bus decode support for Ethernet Serial
Busses
PCI Express Serial Triggering &
Analysis (opt. SR-PCIE)
Bus decode support for PCI Express
Serial Busses
USB Serial Triggering & Analysis
(opt. SR-USB)
Bus decode support for USB Serial
Busses
Custom Serial Decoding (opt. SR-CUST)
Custom Serial Bus decode kit for
developers
21
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
ANALYZE
22
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
DPOJET - A flexible Jitter & Timing Analysis Toolset
The industry standard for serial data testing

Eye Rendering for any serial signal type
–
–
–
–

Advanced Jitter Analysis to find root cause
–
–
–
–

Real-time acquisition of data streams
Flexible software clock recovery
Serial signal quality analysis
Mask and measurement limit testing
Separate and measure Bounded, Uncorrelated
Jitter (BUJ) for better ID of crosstalk-based jitter
Widely-accepted jitter analysis techniques
Clock-Data measurements
Frequency domain jitter filtering
Perform up to 99 measurements on a single
acquisition
–
–
Includes rise time, fall time, amplitude, period jitter,
histograms, PDF’s, etc
Standard-specific measurements speed up
analysis
•
–
23
Transmitter Testing Results & Plots
PCI Express, USB, Ethernet, etc.
Output to Excel/MATLAB for reporting, analysis
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
BUJ Jitter Separation
Analyze
Serial Data Link Analysis Visualizer – Tools that open the eye
System Simulation and Analysis for SerDes, Early Silicon

SDLA Visualizer combines acquired waveforms with channel models to:
• Visualize effects of varying pre-emphasis, equalization, and/or channel
characteristics.
• View effects of transmitter pre-emphasis on the signal as seen by the receiver
• Evaluate Receiver Equalization outcomes
– Vary application and configuration of DFE, FFE, and/or CTLE
– Process acquired waveforms with IBIS-AMI Receiver Equalization
• Analyze effects of channel variations on received signals

SDLA performs measurement Channel De-Embedding
– Manages removal or addition of fixture and cable effects from acquired signals
24
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
Application Development Kit (ADK)
Build your own analysis toolset faster


25
ADK components
– Ability to customize measurements in DPOJET
– Access to Scope UI widgets & icons
– Template Apps for MATLAB, LabView
– Coding and implementation examples
– Access to Tek licensing mechanism
DataStore Public Interface
– Direct user access to waveform sample data
– Uses callback method in place of (slower) polling method
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
Customize Analysis: Tektronix’ Application Development Kit
Solution Elements
User Objective
Custom analysis inside the
instrument GUI
e.g. custom filtering
Extended processing of
data or results
Application Developer’s Kit (ADK)
Custom Analysis
Extension with
MATLAB
Custom DPOJET
Measurements
User Defined
Math Functions
Data Store Public
Interface
e.g. analysis & plotting
Create a complimentary
application
GUI
Toolkit
Application Templates
e.g. in-house tool
Automate a measurement
process
MATLAB with
Instrument Control
Toolbox
e.g. collect measurements
26
DPO/DSA/MSO70000 Series
Copyright © Tektronix
Tektronix Licensing
Interface
55W-25323-4
Others
Analyze
Create Custom Math Extensions with MATLAB

Extend built-in math system with custom MATLAB scripts

Custom functions added to Math Setup control window

Return processed channel data to math waveform

High speed data path (DataStore Interface equivalent)

Signal processing, analysis or visualization
Tektronix Oscilloscope
MATLAB and
Instrument Control Toolbox
Acquire
Process
Display
27
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
DPO/DSA/MSO70000 Analysis Tools Available
DPOJET Jitter And Eye Diagram Analysis (opt. DJA)
Eye diagram, jitter, and timing analysis for real-time oscilloscopes, including BUJ-based analysis
DDR Memory Bus Analysis (opt. DDRA)
DDR1, LP-DDR1/2, DDR2, DDR3 and GDDR3/4 read/write qualification, debug and compliance of JEDEC
measurements
DiiVA Compliance Test Solution (opt. DiiVA)
Fully automated compliance testing for DiiVA devices
DisplayPort Compliance Test Solutions (opt. DP12, DP-SINK)
Four lane simultaneous testing , detailed test report, and margin analysis for DisplayPort 1.2
Fully automated compliance testing for Sink devices
Ethernet Compliance Test Solutions (opt. ET3, 10G-KR, XGbT, SFP-TX, SFP-WDP)
Full PHY layer support for Ethernet variants 10BASE-T, 100BASE-TX, 1000BASE-T, and 10GBASE-T
Fully automated compliance test for 10G-KR, SFP+
MIPI® D-PHY and M-PHY Compliance Test Solutions (opt. D-PHY, DPHY-TX, M-PHY)
Verify D-PHY and M-PHY specifications by rapidly characterizing sources of jitter and signal integrity
Fully automated compliance test for D-PHY transmitters
HDMI Compliance Test Solutions (opt. HT3, HT3DS, HEAC)
Fully automated compliance test support for CTS1.2, 1.3c, 1.4, HEAC Source, Cable and/or Sink
28
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
DPO/DSA/MSO70000 Analysis Tools Available (cont’d)
MHL Compliance Test Solution (opt. MHD)
Measurement analysis of MHL Compliance Test for Mobile-HDMI standard
MOST Compliance Test Solution (opt. MOST)
Electrical Compliance & Debug Test for MOST50 & MOST150 Automotive Busses
PCI Express CEM Measurement Analysis (opt. PCE3)
Comprehensive solution for rev 1.0/1.1/2.0/3.0 CEM and System test points as well as debug
Power Measurement and Analysis Software (opt. PWR)
Measurement and analysis of switching power supply components/systems
QuickPath Interconnect Test Solution (opt. QPI)
PHY testing of Intel® QPI V1.1 interconnects
Serial Data Link Analysis Visualizer (opt. SDLA64)
Analysis of transmitter emphasis, channel embed & de-embedding, FFE/DFE adaptive equalization
SignalVu™ RF Signal Analysis Solutions (opt. SVA, SVE, SVM, SVO, SVP,
SVT)
Real-Time RF Signal Analysis of wideband signals, including Audio (AM/FM/PM), Frequency, Pulse,
Vector & OFDM-based signals
29
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
DPO/DSA/MSO70000 Analysis Tools Available (cont’d)
SATA/SAS Automated Compliance Test Solutions
(opt. SAS3,SAS-RSG, SAS-TSG, SAS-TSGW, SATA-TSG, SATA-RSG)
Automated testing for SATA Gen1 and SATA Gen2 and SAS6G defined test suites
Thunderbolt Automated Compliance Test Solutions (opt. TBT-TX)
Automated characterization, debug & compliance testing for Thunderbolt-based transmitters
UHS II Compliance Test Solution (opt. UHS2)
UHS II Host Tx and Device Tx compliance testing
USB2.0/USB3.0 Compliance and HSIC Test Solution
(opt. HSIC, USB, USB3, USB-RMT, USB-TX)
USB compliance testing including automated probe deskew and receiver test setups for
USB2 and SuperSpeed USB3 and HSIC
30
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000 Series
The World’s Most Accurate Oscilloscopes
Discover
Capture
• 10 ps timing resolution
 Visual Trigger for userdefined capture of
complex signals
and 9 ps rise time for
pulse characterization
• Low noise and jitter
provide more
measurement margin
• 6.25 mV/div sensitivity
for low amplitude
signaling
• Up to 20 Channels of
Acquisition (MSO
Series)
31
DPO/DSA/MSO70000 Series
 Serial trigger and bit
error detection for
8b/10b encoded data
 FastAcq for capture of
Infrequent anomalies
Search
 Advanced Search and
Mark searching
through 8b/10b bus
events for fast
verification
 Up to 250MS record
length for jitter trend
analysis
 TriMode probes for
high fidelity with low
loading
Copyright © Tektronix
Analyze
 DPOJET – BUJ
measurements for
crosstalk-related debug
 DataStore – Faster
access to 3rd Party
analysis tools
 DPOJET One touch
debug of timing failures
 SignalVu for analysis of
complex modulation
and RF signals
55W-25323-4
Tektronix DPO/DSA/MSO70000 Series Oscilloscopes
Model Number
DPO70404C
Description
4 GHz Digital Phosphor Oscilloscope
DPO70604C
6 GHz Digital Phosphor Oscilloscope
DPO70804C
8 GHz Digital Phosphor Oscilloscope
DPO71254C
12.5 GHz Digital Phosphor Oscilloscope
DPO71604C
16 GHz Digital Phosphor Oscilloscope
DPO72004C
20 GHz Digital Phosphor Oscilloscope
DPO72504D
25 GHz Digital Phosphor Oscilloscope
DPO73304D
33 GHz Digital Phosphor Oscilloscope
DSA70404C
4 GHz Digital Serial Analyzer
DSA70604C
6 GHz Digital Serial Analyzer
DSA70804C
8 GHz Digital Serial Analyzer
DSA71254C
12.5 GHz Digital Serial Analyzer
DSA71604C
16 GHz Digital Serial Analyzer
DSA72004C
20 GHz Digital Serial Analyzer
DSA72504D
25 GHz Digital Serial Analyzer
DSA73304D
33 GHz Digital Serial Analyzer
MSO70404C
4 GHz Mixed Signal Oscilloscope
MSO70604C
6 GHz Mixed Signal Oscilloscope
MSO70804C
8 GHz Mixed Signal Oscilloscope
MSO71254C
12.5 GHz Mixed Signal Oscilloscope
MSO71604C
16 GHz Mixed Signal Oscilloscope
MSO72004C
20 GHz Mixed Signal Oscilloscope
32
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Tektronix: The World’s Standard in Oscilloscopes
8 out of 10 engineers rely on Tektronix
to help them speed debug of tomorrow's designs
33
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Backup Slides
High Speed Communications

Impact and Importance
–
–

Demands on Engineering Community
–
–

Complex data transmissions and lower
margins leading to new jitter separation
methods
Optical Modulation Analysis becoming a
design requirement for 4x25G and higher
Opportunity for Innovation
–
–
36
Exponential growth in bandwidth demand
Long range data networks are struggling to
keep pace with video on demand, video
conferencing “face-time”
Highly accurate timing measurement
capability
Convergence and backward compatibility
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
GbE
Wideband Technologies

Impact and Importance
– Increasing use of bandwidth to achieve data
throughput
– Increasing use of imaging radar technology

Demands on Engineering Community
– Use of near-field wideband communications
– Use of microwave frequencies and beyond
for communication links
– Use of wideband chirp technology in
advanced radars for better resolution

Opportunity for Innovation
– Wider bandwidth and higher resolution
instruments
– Miniaturization, SW; Analog, Digital, and
RF/spectrum coming together with direct
analysis at microwave frequencies
37
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Serial Data Bandwidth

Impact and Importance
–
–

Demands on Engineering Community
–
–

Proliferation of standards means increasing
complexity
Faster edges, slew rates impacting EDA
modeling, packaging, PCB design, T&M tools
Opportunity for Innovation
–
–
38
Shift from slower, wide, parallel buses to
narrow, multi-Gb HSS buses
Applications that have been “just around the
corner” are finally becoming reality
Wider bandwidth, faster test tools, embedded
test technologies, and Design-for-Test (DfT)
HSS compliance test packages
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Analyze
Group License Management for Oscilloscope Analysis Tools

Share DPO/DSA/MSO70000 Oscilloscope Software Options
–
–
–
–

Choose from over 30+ Analysis Packages
–
–
39
Across your workgroup
International support available for global teams
Move licenses from instrument to instrument
Web-based tool for license management
Maximize company’s investment
Enable your workgroup’s productivity
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000C Series
A New Level of Performance Oscilloscope
DPO/DSA/MSO
71254C
DPO/DSA/MSO
71604C
DPO/DSA/MSO
72004C
Note
Bandwidth
12.5 GHz
16 GHz
20 GHz
On 4 channels
Maximum Sample
Rate
100 GS/s
100 GS/s
100 GS/s
On 2 channels
Record Length
40
DPO/DSA/MSO70000 Series
250M Optional
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000C Series
A New Level of Performance Oscilloscope
41
DPO/DSA/MSO
71254C
DPO/DSA/MSO
71604C
Improved Time
Base


New Compute
Platform


DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO
72004C
Note

All models

All models
MSO70000C - The Industry’s First Performance Mixed Signal Oscilloscope
Leveraging Tektronix Technology Leadership
Most Accurate Logic
Analyzer
Featuring 20psec
Timing & iCapture
Fastest Real Time Oscilloscope
Featuring 20 GHz on SiGE
MSO70000C
The World’s First Performance
Mixed Signal Oscilloscope
42
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
A New Class of Precise Timing Resolution
DISCOVER
•
Accuracy without compromising
record length
–
•
Unmatched timing resolution &
ability to see long term trends with
critical insight
Agilent
MSO9000
&
LeCroy
MS500
500ps
156ps
TLA7BB4
Timing
80ps - 12.5 Gs/s, up to 250 Mpoints
MSO
70000
43
DPO/DSA/MSO70000 Series
On both analog and digital
channels
Copyright © Tektronix
55W-25323-4
Precise Timing Correlation and Superior Signal Fidelity
DISCOVER

Δt
MSO70000 delivers critical system timing
performance
– Analog and digital acquisitions on a
common clock

The industry’s lowest vertical noise,
highest ENOB and flattest frequency
response
– Great signal-to-noise ratio with more
margin
– Maximum signal fidelity finds critical
signal anomalies affecting designs
44
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Access to Tightly Spaced Test Points
CAPTURE

Industry’s only differential active probes
for MSOs
–

Industry’s best versatility in access points
–
–
–
–
–

45
Excellent signal fidelity
Device Leads
Solder-in
VIA’s and Traces
BGA packages
Square Pins
Reduces fixturing costs and development
time
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Logic Triggering and Qualification
CAPTURE

D0-D15
Clock
Digital
Ch1-4
Analog
16 channel logic trigger
– Enhances exclusive Pinpoint Triggering
capability
– Enables customers to qualify events of interest
more closely
D0
D1
D2
D3
Analog Ch Eye
Diagram
Logic Trigger
Pattern = LHLH
Capture and Measure Only What Matters
46
Pattern
Match
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Trigger
Analog
Trigger
System
User-Defined Parallel Bus Decode and Display
SEARCH

Unmatched visibility of system state

Display up to 16 separate buses
– Using logic, analog and math channels

Formats
– Hexadecimal
– Binary
– User Defined
symbols
47
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Popular Serial Bus Decode, Display and Triggering
SEARCH

I2C, SPI Bus Support
T
– Decoded upon acquisition
– Conveniently displayed on Tek Scope
– Bus-intelligent Triggering
48
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
27
F0
ACK
Symbol File Examples
MSO Symbol File
TLA Symbol File
MSO70000 Reads the TLA
Symbol File
 Ignores text and background
color directives
49
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
Probe Deskew Fixture

Provides time aligned fast edges for 17
simultaneous probe connections
– Square pin connections for logic probes
– Solder-down connection for analog probes
• P75TLRST Probe Tip Included

Two Functions
– Align display of logic channels and analog
channels
– Measures alignment of analog and digital
paths for logic pattern triggering
50
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
New Compute Platform in DPO/DSA/MSO70000C
 Faster Compute platform
– Faster processing of longer data
records, Jitter, noise, BER
measurements and statistics
 Intel Core 2 Duo Processor
– E8400 chip set
– 8GB DDR2-800 RAM
 PCI Express based backbone
51
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000C
Powerful Triggering
Enhanced trigger





52
Stabilizes position
Reduces trigger jitter
Increases trigger bandwidth to instrument
bandwidth
Works with most Pinpoint Trigger types
Operates in most acquisition modes
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
TekLink
Time-aligned Acquisitions between Channels of Multiple Scopes

4 channels or more associated with a
single trigger event

Connect two or more instruments
using a TekLink hub and cables.

TekLink connection status is
displayed in the horizontal readout.

Enable a trigger and the other
instruments are automatically set to
receive the trigger.

Select AND or select OR to combine
all triggers before triggering all
instruments

To align the MultiScope Trigger,
press the Align button.

When MultiScope triggering is
enabled, it displays in the trigger
readout.
53
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000C Series Internal Noise Comparison
 Noise performance of
the MSO72004C with a
signal applied
 For this test, the
instrument was set to a
full-scale voltage setting
of 500mVFS (50mV/div).
 Noise with the 100GS/s
setting is approximately
20% lower than with the
50GS/s setting
55
DPO/DSA/MSO70000 Series
Copyright © Tektronix
500mVFS, 20GHz bw limit
100GS/s v.s. 50GS/s
1.00%
0.90%
0.80%
0.70%
Noise % of Full Scale
 The comparison shows
the noise reduction seen
when the instrument is
set to 100GS/s as
compared to 50GS/s.
Tek MSO72004 Random Noise Plot
0.60%
0.50%
0.40%
0.30%
0.20%
0.10%
0.00%
0
5
10
15
Frequency (GHz)
Tek MSO72004 100GS/s
55W-25323-4
Tek MSO72004 50GS/s
20
DPO/DSA/MSO70000C Series Internal Noise Comparison
with Non-B Series
 Noise performance of
the MSO72004C with a
signal applied
 For this test, the
instrument was set to a
full-scale voltage setting
of 500mVFS (50mV/div).
 Noise with the 100GS/s
setting is approximately
20% lower than with the
50GS/s setting
56
DPO/DSA/MSO70000 Series
500mVFS, 20GHz bw limit
non-B, B, C series
1.00%
0.90%
0.80%
% Of Full Scale
 The comparison shows
the noise reduction seen
when the instrument is
set to 100GS/s as
compared to 50GS/s.
Tek DPO/MSO72004 Random Noise Plot
0.70%
0.60%
0.50%
0.40%
0.30%
0.20%
0.10%
0.00%
0
Copyright © Tektronix
5
DPO72004
55W-25323-4
10
Frequency (GHz)
MSO72004C 50G
15
MSO72004C 100G
20
P7630 Low Noise TriMode™ Probe
Key Features
•
30 GHz Bandwidth
•
Lowest noise high bandwidth differential probe in the industry
•
TriMode™ Probe functionality
–
Make single-ended, differential, and common mode measurements with a single
setup
•
Coaxial inputs up to 30 GHz for HSS testing
•
Termination Voltage Control
–
–
•
Automatic Probe Tip ID
–
57
Terminate the probe input into voltages other than ground for serial data standards
that have high common mode voltage levels like HDMI
Independent control of A & B inputs
Prevent confusion and mistakes with the oscilloscope automatically identifying the
probe tip to ensure the correct DSP filters are used
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
P7630 Connectivity
P76CA-292C
2.92mm Coaxial Adapter with Cables
P76CA-SMP
SMP Coaxial Adapter with Cables
P76CA-292
2.92mm Coaxial Adapter
P76TA
P7500 Tip Adapter
58
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4
DPO/DSA/MSO70000C
Key Characteristics of the P7500
P7520
P7516
P7513A
P7508
P7506
P7504
Bandwidth
(Typical)
>20 GHz, A-B mode
>18 GHz, P75PDM,
Other modes
> 16 GHz
> 13 GHz
> 8 GHz
> 6 GHz
> 4 GHz
Rise Time
(10%-90%)
(Typical)
<27 ps, A-B mode
<29 ps, Other modes
< 32 ps
< 40 ps
< 55 ps
< 75 ps
< 105 ps
Rise Time
(20%-80%)
(Typical)
<18 ps, A-B mode
<20 ps, Other modes
< 24ps
< 28 ps
< 35 ps
< 50 ps
< 70 ps
Differential
Input Range
± 0.625 V (5X)
± 1.6 V (12.5X)
± 0.75 V (5X)
± 1.75 V (12.5X)
± 0.75 V (5X)
± 1.75 V (12.5X)
± 0.75 V (5X)
± 1.75 V (12.5X)
± 0.75 V (5X)
± 1.75 V (12.5X)
± 0.75 V (5X)
± 1.75 V (12.5X)
Noise
<33nV/√Hz(5X)
<48nV/√Hz(12.5X)
<33nV/√Hz(5X)
<48nV/√Hz(12.5X)
<33nV/√Hz(5X)
<48nV/√Hz(12.5X)
<33nV/√Hz(5X)
<48nV/√Hz(12.5X)
<33nV/√Hz(5X)
<48nV/√Hz(12.5X)
<33nV/√Hz(5X)
<48nV/√Hz(12.5X)
CMRR,
(Differential
Mode)
>60dB at DC
>40dB at 50 MHz
>30dB at 1 GHz
>20dB at 10 GHz
>12dB at 20 GHz
>60dB at DC
>40dB at 50 MHz
>30dB to 1 GHz
>20dB to 8 GHz
>15dB to 16 GHz
>60dB at DC
>40dB at 50 MHz
>30dB to 1 GHz
>20dB to 7 GHz
>15dB to 13 GHz
>60dB at DC
>40dB at 50 MHz
>30dB at 1 GHz
>25dB at 4 GHz
>20dB at 8 GHz
>60dB at DC
>40dB at 50 MHz
>30dB at 1 GHz
>25dB at 3 GHz
>20dB at 6 GHz
>60dB at DC
>40dB at 50 MHz
>30dB at 1 GHz
>28dB at 2 GHz
>25dB at 4 GHz
Cable Length
1 meter
1 meter
1.3 meter
1.3 meter
1.3 meter
1.3 meter
59
DPO/DSA/MSO70000 Series
Copyright © Tektronix
55W-25323-4