Product features & specifications

advertisement
Advantys ETB
Ethernet IP67 I/O
Advantys
ETB
Introducing Schneider Electric’s new
family of IP67 rated I/O modules that
connect to Ethernet.
Advantys ETB
Ethernet IP67 I/O modules
● Direct connection to the Ethernet network with
models that support:
● Ethernet Modbus TCP/IP Protocol
● EtherNet/IP Protocol
● Direct mounting on equipment, eliminates
need for enclosures
● IP67 rated modules suited for harsh
environments
● Complete product offer with a full set of power,
sensor, and Ethernet cables and accessories
Product overview
Product features & specifications
System view
Competitive position
Cost comparisons
Customer values
Product overview
● 16 Point Digital Modules: available types
● 16 digital Inputs
● 12 Inputs/ 4 Outputs @ 2 Amps
● 8 Inputs / 8 Outputs @ 2 Amps
● 16 digital Inputs/Outputs configurable
● Ethernet Protocols supported
●
EtherNet/IP
● Modbus TCP/IP
● Protection Level, IP67 Watertight
● Extended Operating Temp. - 25°C to + 70°C
● Built-in 2 port switch for Daisy Chain Connection
● Integrated Web Server
● Scrolling LED Display
Product overview
Modbus TCP/IP
ETB 1EM 16C POO
ETB 1EM 16E PPO
ETB 1EM 12E 04S PPO
ETB 1EM 08E 08S PPO
16 point module, configurable as inputs or outputs
16 point input module
12 point input / 4 point output module
8 point input / 8 point output module
EtherNet/IP
ETB 1EI 16C POO
ETB 1EI 16E PPO
ETB 1EI 12E 04S PPO
ETB 1EI 08E 08S PPO
16 point module, configurable as inputs or outputs
16 point input module
12 point input / 4 point output module
8 point input / 8 point output module
Product overview
● Product Features
2- Power connections, type 7/8
threaded connectors
8 – Input/ Output point ports,
2 I/O points per connector, for
M12 threaded and Ultra-Lock
connectors
Scrolling 4 digit LED Display
2 – Switched Ethernet
communication ports, for M12
threaded and Ultra-Lock connectors
Product overview
● Complete Product Offer – Cables and Accessories
Power Cables
Available in versions with connector at each
end or with single connector at one end for
connection to Power Supply.
4 Pin connector versions for EtherNet/IP
5 Pin connector versions for Modbus TCP
Sensor Cables
Available in versions with M12 threaded
connectors or with quick release Ultra- Lock
connectors. Also available are splitter cables
to connect 2 sensors to a single I/O port.
Ethernet Communication Cables
Available in versions with an RJ 45 connector
at one end and an M12 connector at other end,
or versions with 2- M12 connectors.
(Note: The cable jacket material is approved for both the European and North American markets)
Product overview
● Module with cables and accessories
Power Supply Cables
to additional modules
Power Tee
Processor
Splitter Cable
to sensors
Power
Supply
Ethernet Cable
Adapter
Ethernet Cable to
connect next module
Enclosure
Power Receptacle
Target markets for IP67 I/O
●Installed Base Customers - Automotive
●Machining
●Component Assembly
●Body Assembly
●Food and Beverage
●Bottling
●Packaging
●Material Handling
●Other
●Mining, Minerals, & Metal – Material Handling
●Printing
●Pulp & Paper – Pulping
Paper Machine Wet End
Target markets for IP67 I/O
● Where to use Ethernet IP67 rated I/O Modules
● Harsh Environments that include:
● Oil and/or water spray
● Extended operating temperature -25 to + 70°C
● High vibration and shock
● I/O Modules must or can be mounted directly on equipment
● Field devices are located near I/O Modules, no long wire runs
● There is no space available for I/O cabinets at location
● Need to reduce the cost and time to install the I/O modules
● Field devices selected are available with M12 connectors
● Customers are using Ethernet as their industrial communication
network
Product overview
Product features & specifications
System view
Competitive position
Cost comparisons
Customer values
Product features
● Built for operation in harsh environments
● IP67 Rated Module Package, Connectors, and Cables
● Extended Operating Temperature Range -25°C to + 70°C
● Flexible Mounting System
● Benefit
● Watertight, can be used in locations with oil and water spray
● Used on plant floor or outdoors
● Mounts directly on equipment – no need for enclosure
Product features
● Reduced installed cost – Ethernet Switch
● Built-in 2 Port Unmanaged Ethernet Switch with cross-over capability
- allows daisy chain connections for Ethernet with no need for external switches
● Daisy-chain connection for Power Supply
Power Supply
Processor
Daisy Chain
connection –
Up to 10 Modules
Ethernet
Product features
● Reduced Installed Cost - M12- Ultra-Lock quick release Connector
●
●
●
●
Faster and easier to connect then standard threaded M12
Easy to connect – even when difficult to access
Snap on for IP67 sealing of connections
Standard M12-connectors can also be used on modules
Product features
● Reduced Installed Cost – Built-in Display with Control Buttons
● 4-Character LED Display allows diagnosis without additional tools
● Shows Current IP Address
● Displays IP Address Configuration Mode
● Control Buttons for Setting IP Address in Static Mode
● Displays Errors
● Network functions are displayed (e.g. ping)
Product features
● Reduced Installed and Operating Cost – Integrated Web Server
provides the following capabilities
● Password Protection for Security
● Module Configuration - IP Address, Module Parameters, and WDT
Error behavior
● Module Status Information
● Remote Access and Diagnosis via Web – Interface
● No additional software tool needed for configuration and diagnosis
Product features
Module diagnosis
Output Power
Power present
Power not connected
Module & Input Power
Power present
Power not connected
Input / Output
Input / Output on
Input / Output failed
Input / Output off
Display with information
about Ethernet address, IO &
watchdog status
Ethernet Port
100MBit Communication
10MBit Communication
Module specifications
● Common specifications for all modules
Number of I/O Points
I/O Configurations
I/O Points per Connectors
Power Requirements
Input Type
Input Delay
Output Current
Output Protection
Max. Switching Frequency
Short Circuit Current
16 Digital Points per Module
16 Inputs
12 Inputs / 4 Outputs
8 Inputs / 8 Outputs
16 I/O Points, User configurable
2 Points
24 VDC – Module and Input Power
13 to 28 VDC, 8 amp max. Outputs
Compatible with Contact and 3 wire devices
2.5 ms default, user configurable
2 amps per Output, 8 amps per Module
Electronic Short Circuit Protection
200 Hz
6.5 Amps (typical)
Module specifications
● Common specifications for all modules (continued)
Operating Temperature
Storage Temperature
Protection
Vibration
Mechanical Shock
MTBF
-25°C to + 70°C ( -4° to + 158°F)
-40°C to + 85°C ( -40° to + 185°F)
IP67 according to IEC 60529
IEC 60068-2-8
10G, 11 ms, 3 axis
100,000 Hours
Power Connectors
7/8 Connectors, 5 pin for Modbus TCP/IP
4 pin for EtherNet/IP
M12 and Ultra-Lock Connectors, 4 pin
M12 and Ultra-Lock Connectors, 5 pin
Ethernet Connections
I/O Connectors
Product overview
Product features & specifications
System view
Competitive position
Cost comparisons
Customer values
Typical system configuration
● Ethernet (Modbus TCP/IP) based control system using a
combination of IP67 and IP20 I/O
PC/
Supervisory System
Ethernet Switch/
M1 Processor
Advantys ETB IP67 I/O
mounted on equipment
Advantys STB IP20 I/O
mounted in cabinets
Typical system configuration
● Control system topology for EtherNet/IP network
PLC or IPC
EtherNet/IP
Switch
Advantys ETB IP67 I/O mounted on equipment
Typical system configuration
●Ethernet (Modbus TCP/IP) modules can be used with the following
Schneider control systems:
● Quantum system with NOE Ethernet interface
● Premium system with ETY Ethernet interface
● M340 system with NOE Ethernet interface
● Momentum system using M1E Ethernet processors
Typical system configuration
●EtherNet/IP modules can be used with the following Schneider
control systems along with other control systems:
● Quantum system with NOC Ethernet interface
● Premium system with ETC Ethernet interface
● Rockwell ControlLogix and CompactLogix
systems = opportunity at competitive accounts
Typical I/O configuration
● Advantys ETB I/O has the flexibility to be installed
in the following configurations:
● Daisy Chain
● Star
● Combination
Typical I/O configuration
● Daisy Chain I/O configuration
● Where to use
Systems with I/O count under 160 I/O points
Installations where I/O blocks are within 5 meters of the next block
Applications where installed cost is an issue
● Advantages
Lower installed cost
Eliminates external switch
Easy to expand system
Simplified troubleshooting and maintenance
● Limitations
Up to 10 modules per Daisy Chain
Disconnecting 1 module will shut down the following modules in the daisy
chain
Typical I/O configuration
● Star configuration
● Where to use
Systems with large number of I/O points
Installations where the I/O is not concentrated in one area
Applications where system will be changing, with modules added,
disconnected and reconnected to the network
● Advantages
Large number of modules per system (limitation is number of switches)
Flexible module location
● Disadvantages
Higher installed cost, switches
Longer cable runs, adds complexity
Maintenance requires additional effort
Typical I/O configuration
● Combination of Star and Daisy Chain configuration
● Where to use
Large systems with multiple machine or work areas
● Advantages
Segments modules into groups for each area
Simplifies installation and troubleshooting
Has lower installed cost than Star only network
● Disadvantages
Most effective for larger systems
Typical field devices
● Advantys ETB I/O can connect directly to sensors and field
devices that are available with M12 connectors and are IP67 rated.
● Schneider Electric Sensors include:
-Osiprox XS6 and XS8 Inductive Sensors
-Osiris XUB Photoelectric Sensors
-PhotoVirtu XUN Teachable Sensors
-VM1 Ultra Sonic Sensors
For the full range of Schneider Electric sensors, please visit our web site:
http://www.sensors.com/
Product overview
Product features & specifications
System view
Competitive position
Cost comparisons
Customer values
Competitive advantages
● Built-in Ethernet Switch
Save time and money by eliminating the
need for external switches to connect modules
● Integrated Web Server
Simplifies Module Configuration & Diagnostics
No Additional Software Required
● 4 Character Display
Real Time Ethernet and Diagnostic Information
● Quick Release Connectors Fast connection to communications, and field
devices
Competition
IP 6x Block and Block Modular I/O Systems
Schneider
Advantys ETB
Network Types
Ethernet IP
Modbus TCP/IP
X
X
1732 Armor
Block
X
PicoNet I/O
X
X
ProfiNet
Cube 67
X
X
SAI Active
Fieldbus Box
Universal Pro Couplier Box
X
X
X
Power Link
EtherCat
Types of Modules
Digital Inputs/Outputs
X
X
X
X
Analog Inputs/Outputs
Architecture
Block
Block Modular
Fieldline
Modular
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Features
Built-in Switch
Built-in Display
M12 Quick release
connectors
Integral Web Server
Extended Operating Temp
X
X
X
X
X
X 67
System
X
X
Product overview
Product features & specifications
System view
Competitive position
Cost comparisons
Customer values
IP67 I/O cost advantages
● Lower installed cost
● No need for cabinet or enclosure
● Plug-in cables for Power, I/O, and Ethernet Communications
● Simplified configuration via Web Pages or HMI Display
Total Installed Cost
€825.70
€655.00
Traditional I/O System
Advantys ETB I/O
I/O Modules
Terminal Blocks
Wiring Duct
Field Sensors and Actuators
Installed cost comparison
16 I/O points
● Traditional I/O system (IP20) includes the following;
●
●
●
●
●
●
●
NEMA 4 metal enclosure 16”x12”x8”
2 wires per device
Wiring from I/O module to Terminal blocks
Wiring from Terminal blocks to Field Devices
Power Wiring coming from outside 24 VDC Power Supply
Mounting I/O Module and Terminal Blocks
Labels for all wires
● Advantys ETB IP67 Rated I/O modules includes the following
● Power, Sensor, and Ethernet Cables
● Labor to install 10 threaded type connectors into module
● Not included in the installed cost comparison
● I/O Modules, power supply, sensors or actuators
● Labor to mount I/O module or enclosure on machine
Installed cost comparison
Advantys ETB IP67 vs IP20
● Summary of installed cost for
16 I/O points on Ethernet:
26%
lower installed cost for
Advantys ETB I/O
Module cost (net)……..
Installation cost……….
Total cost
Advantys ETB
IP20 I/O
€216.00
€439.00
€204.00
€671.70
€655.00
€809.70
= €170.70 less
Installed cost comparison
16 I/O points
Advantys ETB
Traditional I/O
Qty.
Cost
1
1
1
€ 20.00
€ 20.00
€ 20.00
€ 20.00
€ 20.00
€ 20.00
16
16
2
34
€ 10.00
€ 8.50
€ 8.50
€ 0.05
€ 160.00
€ 136.00
€ 17.00
€ 1.70
Traditional I/O
Mounting Labor
I/O Module
Terminal blocks & hardware
Fittings in cabinet for wiring
Wiring Cost Labor
To Field Devices
To Terminal Blocks
Power Wiring
Wire Lables
Parts Cost
€ 205.00
€ 12.00
€ 20.00
€ 10.00
Enclosure
Terminal Blocks
Fittings
Wire
Advantys ETB
Sensor Cables
Straight Cables
Splitter Cables
Power Cable
Ethernet Cable
8
8
1
1
€
€
€
€
12.00
27.00
49.00
28.00
€ 96.00
€ 216.00
€ 49.00
€ 28.00
Cabling Labor
Install Cables in Module
10
€ 5.00
€ 50.00
Difference
Total Installed Cost
€ 439.00
€ 621.70
€ 182.70
41.62%
Product overview
Product features & specifications
System view
Competitive position
Cost comparisons
Customer values
Customer values
● Simple Installation
● I/O mounted directly on equipment eliminates the
need for enclosures
● Quick Release Connectors allow fast connection to
power, communications, and field devices
● Direct Connection to Ethernet Network without the
need for external switches
● Easy to Configure
● Built-in Ethernet Switch for Network connections
● Web Pages and Display simplifies integration and
commissioning
● Solution Approach
● Can be combined with Schneider PLC’s, sensors,
actuators, drives, and IP20 I/O for a total control
system package
● Complete solution with cables and accessories
Download
Related flashcards

Quantum mechanics

65 cards

Create Flashcards