Good Afternoon
Liquid Filtration
.
Types of Filtration
Process
Industrial
Power Generation (Rotary Equipment)
Gas Filtration, Separation, Coalescing
Liquid/Liquid Separation
Process Filtration
.
.
.
.
.
Own Style of Vessel and Element
Swing Bolts and legs
Elements are normally 2.5” OD x 1” ID X 10”
Long – 40” Long
Many Sealing Devices
Many Materials of Construction
Teflon
Polyethersulfone
Nylon
Rayon
Polyester
Polypropylene
Microglass
Cotton
Metal Tubes
Glass (Baked and Unbaked)
.
Terminology of Process Vessel
Internals
.
Top Seat Plate Assembly – Cap and Spring as one piece
Tube Guide
Universal Seat Cup
Universal Seat Cup will Accommodate
222 “O” Ring single closed end
Double Open End
Double Open End w/ Gaskets
Standard Open End W/Spring
222 “O” Ring with Fin End
226 Closed End
Extended Core (Open or Poly Spring, Closed End
Centercore for Process Elements 2.5”
OD x Lengths 10” 20” 30” & 40”
Materials:
Polypropylene
Tin Plated
304 SS, 316 SS
Bayonet End (Millipore Style)
Element Extender (plugs into seat cup)
Interlock Cap, SOE
“226” Single O Ring, (plugs into seat cup)
“222” O Ring End (plugs into seat cup)
Standard Closed End Cap
Standard End Cap when Gasket is needed
Poly Spring w/open end
Process Filter Vessel
Universal Seat Cup
Accepts:
Double Open End
222 “O” Ring SOE
226 “0” Ring SOE
Extended center core
Example of 222 “O” ring and
Universal Seat Cup together
Extender that fits into the Separator Plate
Typical Process Vessel
and Internal Set up
Industrial Filtration & Power Generation
..
.
.
.
Own Style of Vessel and Element
Straight Through Bolts
Elements are normally 6” OD x 2.5” ID X 18” Long –
44” Long
Internal set up versus Process – Very Simple
Materials of Construction
Cellulose (Paper)
Polyester
Microglass
Pleated Metal
ASME Code Simplex & Duplex
Standard Polyester Pleated Media
Sizes
3” OD x 1 ¼” ID x 10” long
6” OD x 2 5/8” ID x 18” Long
6” OD x 2 5/8” ID x 36” long
6” OD x 39” ID x 39” long
1600
1 uM
3 uM
6 uM
12 uM
25 uM
Beta Ratio
800
400
200
2
4
6
8 10 12 14 16 18 20 22 24 26
MIcron
Metal Strainers
2200 Series Elements Available in
Metal
Micron ranges from 5 micron to
100 Micron
Helps with Temperature and
Compatibility
Interchangeability with “2200”, ‘C’, ‘S’, and “V” Series
elements
Versatility of Applications
Chemicals
Electronic
Food & Beverage
Magnetic Media
Pharmaceuticals
Cosmetics
Medical
Photographic
Potable Liquids
Organic Solvents
Lubricants
Process Water
Cooking Oils
Photoprocessing
Amines
Chemical Process
R.O. Prefiltration
Disposal Well
Animal Oils
Concentrated Alkalies
Dilute Acids & Alkalies
Mineral Acids
Organic Acids & Solvents
Oxidizing Agents
Petroleum Oils
Photo Solutions
Potable Liquids
Vegetable Oils
Water
Prefilter for Membranes
Amines
Photographics
Plating Solutions
High Technology Coatings
Food & Beverages
Membrane Prefiltration
DI Water
Chemical Processing
Power Generation – Rotating Equipment
Compressors, Gas Turbines, Steam Turbines, Generators, Couplings
Liquid – Lube – Fuel - Water
Natural Gas
2710E1VO NFS Part Number
2710E1 NFS Part Number
2300AJ NFS Part Number
2200A4 NFS Part Number
P718-0030-SH-1-7 Old NFS Part
P426-0250-PC-1-7 Old Part Number
S186-0030-F-1 HYCOA Part Number
V264-0250-F-1 HYCOA Part Number
8” OD x 20” L and 11” OD x 21” L
HYG15129E Air Atomizing Element
Two Sizes for GE Part
363A4330P002 & P003
Polypropylene Process
Element
2600M6 NFS Part Number
M330-0010-SS-1-0 Old Number
Sizing based on actual applications:
Design Flow Rate: 100 USGPM of Heat Transfer Fluid
Design Temperature: -20o F to 650o F
Design Pressure: 125 PSI
ASME Code and Stamp Construction in Carbon Steel
.06” Corrosion Allowance
2” Butt Weld connections
3/4” FNPT vent and drain (Plugged)
Nickel plated bolting for corrosion resistance at high temperature
High temperature 304 SS spiral wound closure gasket per EES VED1003A
Element Rated 98% @ 5 uM
Modified Silicone PaintElements:
Data Sheets & Assembly Drawing
WPS/PQR/Weld Map
ASME Code Calcs
NDE Testing and examiner qualifications
Material Test Reports
Nameplate Detail
U-1 Form
Recommend and size a vessel
Power Generation Application:
Steam Turbine Lube Oil
Design Flow Rate:
2,200 GPM
Design Pressure:
200 PSIG
Design Temperature:
-20 to 250 deg F
Corrosion Allowance:
0.0625”
Fluid:
ISO 32 Light Oil
Normal Flow Rate:
0 to 2,000 GPM
Viscosity:
60 to 800 SSU (temp dependent)
Operating Pressure:
200 PSIG
Operating Temperature: 20 to 250 deg F
Max Pressure Drop:
5 PSID
25 Micron
General Industrial Application:
Hydraulic Oil
Design Flow Rate:
100 GPM Of ISO VG 46 Oil
Design Temperature:
-20o F to 200o F
Design Pressure:
1000 PSI
Non-Code
Carbon Steel
1000 PSI Design @ -20 to 1750 F
2” in/out Connections
3/4” NPT vent and drain connections
25 Micron 99%
Duplex Design
Process Design:
Salt Water
(2) salt water filters, carbon steel with internal coating is ok.
Flow : 250 GPM
Line Pressure 100 psig
DP: 2psi
Micron: 40
Power Generation
Element, Lube Oil, Liquid
Fuel Oil for Gas Turbines,
Bio-Diesel and Ethanol
fuels as a Standard.
Spring
Standard Element
2200A2, A3, A4
V264-0010, 0060, 0120, 250
V394, V396
Cardboard Box
Vessel Stub-up
Incoming Request for Vessels or Systems
Gas Filtration, Separation, Coalescing
National Filtration Systems, Inc.
Liquid/Liquid Separation
Dwight Coy
Aftermarket Element Quotes and Orders
Includes:
Gaskets, Shoe Kits for HYCOA, Process Elements,
Mahle, Power Generation and General Industrial
Elements, Set up new accounts.
Tom Tokar