CPU Shares (VDC control groups)

advertisement
SUPERVISOR 2 MODULE
• Quad Core – 2.12 GHz
• NX-OS software version 6.1 (or better) Required
• 12 GB of memory (NVRAM – 2 MB battery backup)
• CMP not supported
SUPERVISOR 2E MODULE
• 2 - Quad Cores – 2.12 GHz
• NX-OS software version 6.1 (or better) Required
• 32 GB of memory (NVRAM – 2 MB battery backup)
• CMP not supported
• Support for 45 fabric extender modules (Requires 2E)
Supervisor Comparison
SUPERVISOR 2/2E Front Panel
VDC Support on Sup2/2E
CPU Shares (VDC control groups)
• Enables allocation of specified amounts of the switch’s CPU to a specific
VDC
• Enables prioritization of VDCs and helps ensure that critical VDCs have
access to the CPU
• Prevents lower-priority VDCs from negatively affecting higher-priority VDCs.
Number of VDC’s Supported
• 1 admin VDC on Cisco Nexus 7000 Series Supervisor 2 and Supervisor 2E
• 8 VDCs on Cisco Nexus 7000 Series Supervisor 2E
F2 Line Card
• Need Cisco NX-OS 6.0 or later
• Need Fabric-2 Module
• Two 55 GB traces to each fabric module – Up to 550 Gbps in each direction
• May not mix modules in VDC when using F2 line cards. All I/O modules must
be F2’s
• Performs routing
F2 Line Card - Switch On Chip
4 ports per SoC
Performance
720-mpps L2 and L3 forwarding capacity for both IPv4 and IPv6 packets
16,384 per SoC, and up to 196,608 per module (depending on VLAN
MAC address entries allocation
VLAN
4096 simultaneous VLANs per virtual device context (VDC)
IPv4 entries
32,768 per SoC
IPv6 entries
16,384 per SoC
Adjacency entries
16,384 per SoC
16,384 per SoC, and up to 196,608 per module (depending on ACL type and
ACL
interface configuration)
Policers
1024 per SoC
COPP
Supported
NetFlow
Up to 256 programmable sampling rates fabric interface
Switch fabric interface 550 Gbps in each direction distributed across up to five fabric modulesQue
Queues per port
Ingress (4q1t and 2q1t)
Egress (1p3q1t, 2p2q1t, and 3p1q1t)
7000 M2-Series Module
• 24-Port 10 Gigabit Ethernet Module with XL Option
• Product compatibility: support in all 7000 Series chassis and w/Fabric-1 and
Fabri-2 Modules
• Software Compatibility: NX-OS Release 6.1 or later
• Queues per port: Ingress: 8 queues and 2 thresholds (RX:8q2t)
Egress: 1 strict priority queue, 7 deficit-weighted roundrobin (DWRR) queues, and 4 thresholds (TX: 1p7q4t)
• Port buffers: Ingress – 5.21 MB per port
Egress – 5.21 MB per port
Next Generation 100G & 40G
M2 Line Cards and 6904
Port Number for Nexus 7000 based on fully populated 7018
Download