GE Entrée Card ● Please protect your access card. ● Do not share it with anyone. ● Report missing or lost cards to security immediately. ● Official Visitor cards are available. The System There are two components in the security system: Access Card Card Reader CARD READERS There are 4 card readers; One for each of the 4 rooms. ADT Alarm System USING YOUR CARD Present your green card to the black “card reader.” You will hear a click and should then be able to open the door. If the door does not open, this indicates: ● You need to press forward on the door then pull! OR ● You have no permission to the room. Contact Security! NEXT Security Command Keypad OPENING & CLOSING PROCEDURE There are FOUR of these keypads, one for each room. They are totally independent from each other. Security Command Keypad SYSTEM IS ONLINE Security Command Keypad RED LIGHT INDICATES SYSTEM IS ARMED. Security Command Keypad 16 Keys ARM DISARM Besides the number keys 0-9, there are 3 basic interface areas: 1 “Command Key” 1 2 3 5 9 6 0 7 4 8 1 “Back Arrow” key 4 “Select” keys at top Opening in Morning 1. Present card at Main Entrance 2. At room, enter Combo in X-09 3. Present Green Access card & enter room – alarm will sound. 4. Enter your 4-digit code, then press Command Key 5. At NO – YES choice, choose YES to disarm alarm. 6. Display should now read: “ALL SYSTEMS OFF” Closing at Night 1. Complete Area Checklist 2. Enter room, close door completely 3. Press Command key once 4. Press key directly below ARM (left side) 5. Enter your 4-digit code 6. At NO – YES choice, choose YES to ARM system. You have 60 seconds to exit! 7. Spin X-09, then swipe your access card and pull door to ensure it is locked. REFERENCES XR500 Alarm Guide Online: http://www.atlassecurity.net/documents/XR500%20User%20Guide.pdf