Administration
Business Enabled Communications
Contents
•Starting Web Service
• User’s Guide
• Station Program
• Admin & Maintenance
• ID & Password
• Web Access Authorization
• Admin Categories
• Overview Menu
• New Window
• Related PGM Link
• Numbering Plan Type
• System Numbering Plan
• Flexible Station Number
• CO Group Access Code
• Feature Code Numbering
• Station Group Number
• Networking Numbering
WEB Admin
Starting Web Service




Install iPECS-MG system
Default MPB IP address : 10.10.10.1
Or, configure MPB IP using RS-232 port.
Connect to the system IP on web browser.
 iPECS-MG web service homepage provides ;
 User’s Guide
 Station Program
 Admin & Maintenance
WEB Admin
User’s Guide
• Click ‘User’s Guide’ to refer to brief user’s guide.
• User’s guide provides;
 Program Codes (Overview)
 Numbering Plan (Overview)
 User Name Registration
 Station Speed Dial
 System Speed Dial
 Dial by Name
 Intercom Signaling Mode
 Station Flexible buttons
 Call Forward
 Transfer
 Authorization Codes
 DND
 Call Pick-up
 Paging
 How to access CO/IP line?
WEB Admin
Station Program
 Click ‘Station Program’ menu and enter desired station number and password.
 Password is mandatory for station program.
• Station Program provides ;










Station Port Attributes
Station DN Attributes
Call Forward
Pre-Selected Message
Station Speed Dial
Station Flexible buttons
Station ICLID
Mobile Extension Attributes
Send Internal SMS
User Guide
WEB Admin
Admin & Maintenance
 Click ‘Admin & Maintenance’ menu
to start Admin.
 Enter User ID and Password
for web admin
and click ‘Login’ button.
 Web Admin Categories are displayed
according to the user level.
WEB Admin
ID & Password
 Admin ID & Password at System Data
 System Data > System Password (226)
 Basic Password tab : ID & Password of User, Admin. and Maint.
 Additional Password tab : ID & Password of User2, User3, Admin2 and Admin3.
WEB Admin
Web Access Authorization
 User Access level control at System Data
 Click System Data > Web Access Authorization
 Accessibility of 3 Users & 3 Administers about every Admin fields.
 Maint. ID has no restriction.
Admin Categories
Admin Categories
• Pre-programmed data
• Numbering Plan
• Station Port Data
• Station Number Data
• CO Line Data
• Station Group Data
• System Data
• Table Data
• Tenant Data
• Board Data
• Voice Network
• T-net Data
• H.323 Data
• SIP Data (web only)
• Zone Data (web only)
• SNMP Data (web only)
• DECT Data
• Green Mode (web only)
• Initialization
Admin Categories
ADMINISTRATION
PRE-PROGRAMMED
DATA
NUMBERING PLAN
STATION PORT DATA
MENU
Location Program(100)
Slot Assignment(101)
Logical Slot Assignment(103)
DECT/IP/SIP Max Port(104)
IP-Phone Registration(106)
DTIM/SLTM Registration(107)
IP Address Plan(108~109)
Numbering Plan Type(110)
System Numbering Plan(111)
Flexible Station Number(112)
Feature Numbering Plan(113)
CO Group Access Code(114)
Station Group Number(115)
Station Type(120)
Station Port Attribute(121~124)
Station Flexible Button(126)
Station CTI IP Address
ADMINISTRATION
MENU
Station DN Assignment(130)
Station DN ATTR(131~135)
Station COS Assignment(137)
Station Auto Dial Attribute(138)
STATION NUMBER DATA
CO LINE DATA
Preset Call Forward(142)
Call Forward(143)
Station VMIB Attribute(145)
Mobile Phone Attribute(146)
CO/IP Group Access(150)
Page Zone Access(151)
Command Group Access(152)
CO Line Attribute(160~163)
Incoming CO ATTR(165~166)
CO Ring Assignment(167)
Normal/DISA CO ATTR(168)
Incoming CO Alternative(169)
Outgoing CO ATTR(170~171)
Outgoing CO Alternative(173)
CO Inter-Digit Timer(174)
DTMF Send Interval(175)
CO COS Assignment(177)
CO-to-CO Attribute(179)
CO Group Access Code(180)
Alternative Ring Table(181)
Admin Categories
ADMINISTRATION
STATION GROUP DATA
SYSTEM DATA
MENU
Station Group Assign(200)
Station Group ATTR(201~202)
Voice Mail Group(203)
Call Pick-Up Group(204)
Page Group(205)
Command Conference
Group(206)
PTT Group(208)
Interphone Group(209)
Pilot Hunt Group(210~211)
System Timer(220~222)
System Attribute(223)
System Password(226)
Alarm Attribute(227)
External Control Contact(228)
Music Source(229)
RS-232 Setting(230)
Serial Port Selection(231)
SMDR Attribute(232)
System Date & Time(233)
LED Flashing Rate(234)
PPP Attribute(235)
Mobile Attribute (236)
Intercom Busy Digit(237)
ADMINISTRATIO
N
SYSTEM DATA
TABLE DATA
MENU
Dial-Tone Digit Table(240)
Executive/Secretary
Assign(241)
Executive Access(242)
PPTP Attribute
Web Access Authorization
Toll Exception Table(250)
Digit Conv. Table(251~252)
System Time Table(253~254)
LCR Time Table(255)
Holiday Time Table(256)
System Speed Dial(257)
Emergency Code Table(258)
Announcement Table(259)
CCR Table(260)
ICLID Table(262)
CLI Conversion Table(263)
Tone
Frequency/Cadence(264)
Ring Table(265)
Ring
Frequency/Cadence(266)
Voice Mail Dial Table(269)
Admin Categories
ADMINISTRATION
TENANT DATA
BOARD DATA
VOICE NETWORK
T-NET DATA
MENU
ATD Group Assignment(270)
ATD Group ATTR(271~272)
Night ATD Group Assign(275)
Night ATD Group ATT(276~277)
Tenant Attribute(280~281)
Tenant Group Access(283)
CO Call Restriction(284~285)
Local Call Prefix Table(286)
Long Call Prefix Table(287)
International Call Prefix(288)
Tone Table(290)
ISDN Board Attribute(300)
ISDN Clock Priority(301)
VOIB/VMIB Board ATTR(305)
Networking Attr(320)
Networking Numbering(321)
T-Net Attribute(330)
CM Attribute(331)
FoPSTN Attribute(333)
T-Net Board Attribute(334)
IP-Phone T-Net Enable(335)
ADMINISTRATION
H.323 DATA
SIP DATA
ZONE DATA
SNMP DATA
DECT DATA
GREEN MODE
INITIALIZATION
MENU
H.323 Routing Attribute(360)
H.323 VOIB Attribute(361)
H.323 Incoming ATTR(362)
GK Attribute(363)
SIP User ID Data(370)
SIP CO Service(371)
SIP Station Attribute(380)
SIP STA Service ATTR(381)
Zone Attribute(395)
Zone RTP Relay Group(396)
Inter Zone Attribute(397)
Station Zone Attribute(399)
SNMP Data
DECT Registration(0#)
DECT Attribute(491)
Green Mode Activation
Green Mode Time Setting
Initialization(499)
Overview Menu
• ‘ Overview’ menus in STA, Station Group or CO PGM categories.
New Windows
• Click [N] to open new window.
Related PGM Link
• Some PGM has link menu for other PGM
Numbering Plan
Numbering Plan Type (ADM 110)
 6 Types of Numbering Plan default values set can be selected.
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Station Numbers
100 ~ 473
100 ~ 699
1000 ~
1647
7000 ~
7647
2000 ~
2647
2000 ~
2647
Attendant Call
0
*9
0
0
9
#9
CO Group Access
Code (Any Grp)
9
0
9
1
0
0
CO Group Access
Code
801~ 872
*801 ~ *872
801~ 872
401~ 472
801~ 872
#801~ #872
Feature Code
5xx, 6xx,
etc
*5xx, *6xx,
etc
5xx, 6xx,
etc
5xx, 6xx,
etc
5xx, 6xx,
etc
*5xx, 6xx,
etc
Hunt Group
620 ~ 669
*620 ~ *669
620 ~ 669
620 ~ 669
620 ~ 669
*620 ~
*669
Numbering Plan
System Numbering Plan (ADM 111)
 Maximum 8 digit numbering is possible.
 Every Numbering Plan codes should be matched with System Numbering Plan.
- Prefix Code
- More digits
- Master Prefix digits
: preceding digits in common
: number of following digits after prefix code
: upper 4 digits among prefix code
; XXXXXXXX (Max 3 in iPECS-MG 100, 5 in iPECS-MG 300)
2XXX
0
*4
*5XX
*6XX
*7
*8XX
#8XX
#9
#*XX
1XXX

 If deleted, all of the
related numbering plan
codes are deleted!
Numbering Plan
Examples
 Make Station Number 1000 ~ 1499
- Required Numbering Plan : 1XXX
- Prefix Code : 1, More digits : 3
- Master prefix digits : None
=> Assign Station Numbers at ADM 112.
 Make Station Number 4501000 ~ 4504899
- Required Numbering Plan : 450XXXX - Prefix Code : 450, More digits : 4
- Master prefix digits : 450
=> Assign Station Numbers at ADM 112.
 Make Feature Codes 801 ~ 872 and 8#
- Required Numbering Plan : 80X ~ 87X, 8#
- Prefix Code : 80 ~ 87, More digits : 1
- Prefix Code : 8# , More digits : 0
- Master prefix digits : None
=> Assign Feature Codes at ADM 113.
Numbering Plan
Flexible Station Number (ADM 112)
• Check and edit Station Number one by one
• Change Station Number
using order range
• Change Station Number
using station range

To Assign new numbering,
proper System Numbering Plan should
exist!!
• Station Number search
Numbering Plan
Feature Code Numbering (ADM 113)
• Select [Feature Numbering] tab at Feature Numbering Plan menu
• Check or edit Feature Code one by one
To Assign new numbering, proper
System Numbering Plan should
exist!!

Numbering Plan
CO Group Access Code (ADM 114)
• Select [CO Group Access Code] tab at Feature Numbering menu.
• Check or edit CO Group Access Code one by one

To Assign new numbering,
proper System Numbering
Plan should exist!!
• Delete all CO Grp Access Code
using order range
• Assign CO Group Access Code
using order range
Numbering Plan
Station Group Number (ADM 115)
• Select [Station Group Number] tab at Feature Numbering menu.
• Check or edit Feature Code one by one

To Assign new numbering,
proper System Numbering
Plan should exist!!
• Delete all Station Group Number
by using range
• Assign Station Group Number
by using order range
Numbering Plan
Networking Numbering (ADM 112)
• Open ADM 321 at Voice Network Data.
• Enter index number to edit and load data.

To Assign new numbering,
proper System Numbering Plan
should exist!!
• Check ADM 111 and all the other numbering plan to assign or remove
Net Numbering.