Power² & Light²
Version
A complete unit
with maximum power
• Objectives:
Pre-implant surgery, implantology,
maxillofacial surgeries and
conventional treatments
•
•
•
•
I-Surge micro-motor
Piezotome 2 LED handpiece
Newtron LED handpiece
Ultrasonic connector:
The Piezotome or Newtron
handpieces are automatically
recognized by the unit
The Implant Center 2 combines the best of
ultrasonic and motor technologies for:
- Pre-implant surgery,
- Implant surgery,
- Implant maintenance,
- Oral maxillofacial surgeries
Technology
Motor technology:
Ultrasonic technology:
Brushless
 Rotation speed:
100 – 40 000 rpm
 6 N.cm up to 24 000 rpm
 Contra-angle ratio: 20:1
 Rotation speed at instrument end:
Automatic
frequency :
28-36 kHz
Controlled
amplitude
Real-time power
adjustment
[5 – 2 000 rpm]
Ultrasonics
Newtron mode: piezo
sinusoïdal signal
Piezotome mode: modulated
piezo signal (modulation)
Ultrasonic high power
generator
Safety: preservation of soft tissue (nerves, membranes,
arteries).
Rapidity: fine, fast, precise and effortless
selective cut thanks to ultra-sharp, robust and
resistant Piezotome tips.
Comfort: Atraumatic treatments (no bone loss, no
bleeding), fast healing, and greatly reduced postoperative pain.
New touch-sensitive screen
- Giant 5.7’’ screen,
- Touch-sensitive screen
(even with gloves),
- Highlighting of the
activated function for
improved visibility.
Screen zones
Technology zone
Piezotome mode activated
Irrigation zone
Power value zone
Mode zone
Options zone
Piezotome mode
Handpiece
Respect of soft tissue, fast healing and greatly reduced
post-operative pain
•
•
•
•
•
•
•
Boosted (up to 60 W output power) for a much quicker procedure,
It is up to three times more powerful than Piezotome/Implant Center 1
Equipped with the latest high luminosity generation LEDs,
Highly resistant,
Does not induce overheating or extraneous vibration,
Can be sterilized,
Easy to clean (the nozzle can be detached).
Piezotome mode:
Clinical aspects
To perform successful, fast and worry-free delicate
pre-implant surgical procedures:
- fine osteotomy,
- osteoplasty,
- bone grafting,
- sinus lift,
- extraction,
- crown lengthening
-…
Piezotome mode
LED
Purge
Irrigation
Progressive
footswitch
flow rate
Irrigation
activation/
deactivation
Save Mode
Fine power
adjustment
Power settings
referring to bone
density classification
Piezotome 2 Tips
The tips dedicated to Piezotome 2
and Implant Center 2 are easily
recognizable by:
- their large base,
- their “II” laser mark.
Piezotome tips version 1
Piezotome tips version 2
Piezotome 2 Tips
- Stainless-steel medical grade
alloy with specific thermic and
surface treatments, polishing, etc.
- Synthetic diamond coating with
special processing.
- Clean, fast and effortless cut.
- Ultra-sharp, robust and resistant tips.
NEW PACK
design!
I-SURGE mode
I-SURGE mode
Handpiece motor
(contra-angle,
straight, multiplier)
Rotation speed
Progressive
or ON/OFF
footswitch
Torque
Save mode
Rotation direction  Audible signal
Forward/reverse drive selected through the footswitch
4 modes with complete
customization possible
Fast and simple
settings adjustments: Modes
1. Select your program.
I-SURGE: four pre-set modes
Marking
Pilot drill
implant site
Site preparation
Screwing
Tapping
1200 Rpm
800 Rpm
15 Rpm
30 Rpm
80 N.Cm
80 N.cm
40 N.cm
40 N.cm
80 ml/min
100 ml/min
100 ml/min
0 ml/min
P1, P2, P3: Direct access to Rpm
P4: Direct access to Ncm
Fast and simple
settings adjustments: CA
1. Select your program.
2. Select/change your
contra-angle ratio.
CA ratio selection
Presentation of the
most common
contra-angle ratios
(multiplier, direct,
divider).
If the ratio is not
pre-defined,
insert your own
ratio by pressing
this button.
20:1
Standard
Multiplier
Handpiece/
contra-angle
Direct
Handpiece/
contra-angle
Standard
Divider
Handpiece/
contra-angle
CA ratio selection
Set your own
contra-angle ratio,
whether it is
multiplier,
direct, or
divider.
20:1
Handpiece
Setting
Fast and simple
settings adjustments: Rpm
1. Select your program.
2. Select/change your
contra-angle ratio.
3. Select the speed rotation
needed by:
-Pressing the + and – buttons on
P1, P2 and P3 only,
- Pressing the Rpm button.
Fast and simple
settings adjustments: Rpm
20:1
1235
Rpm setting
Fast and simple
settings adjustments: Ncm
1. Select your program.
2. Select/change your
contra-angle ratio.
3. Select the speed rotation
needed by:
-Pressing the + and – buttons on
P1, P2 and P3 only,
- Pressing the Rpm button.
4. Select the torque needed
by:
-Pressing the + and – buttons on
P4 mode only,
-Pressing the Ncm button.
I-SURGE mode
20:1
1235
Torque
Setting
85
I-SURGE mode
1. Select your program.
2. Select/change your contraangle ratio.
3. Select the speed rotation
needed by:
-Pressing the + and – buttons on P1,
P2 and P3 only,
- Pressing the Rpm button.
4. Select the torque needed by:
-Pressing the + and – buttons on P4
mode only,
-Pressing the Ncm button.
5. Increase/decrease/delete
irrigation flow rate.
6. Select the progressive or
ON/OFF footswitch
7. Save
NEWTRON mode
LED NEWTRON handpiece
• Excellent visibility even in
posterior areas,
• Cold light (6 000 – 7 000°K) for
better tissue recognition,
• Ideal for working with loupes,
• Powerful (100 000 Lux), very longlasting LEDs,
• Handpiece can be autoclaved at
134°C.
NEWTRON mode:
Clinical aspects
- Periodontal procedures (surgical, non-surgical)
- Endodontics
- Microsurgery (apicoectomies)
- Implant maintenance
- etc,…
NEWTRON MODE
Delicate precision treatments
Prophylaxis - Scaling
N°1S tip
Periodontics
Maintenance
PH2R tip
H3 tip
Surgical endodontics
Endodontics
ET25 tip
Conservative and restorative dentistry
Excavation
Prosthetic finishing
S12-90ND tip
EX1 tip
PM1 tip
NEWTRON mode:
Four power settings
Low power; low amplitude.
Delicate treatments:
Periodontics.
Medium power; medium
amplitude. Precision
treatments: Endodontics.
High power; high amplitude.
Routine prophylaxis:
Scaling.
Very high power; maximum
amplitude. Special treatments:
Crown loosening.
NEWTRON mode:
Fine adjustment
Each mode (Soft – Medium High – Boost) enables fine
power adjustment from 1 to
10.
Ergonomics
Peristaltic pumps
• Silent-running pumps.
• Extremely precise irrigation
flow.
• No bone necrosis.
• Easy to install irrigation
line.
PiezoTouch™ footswitch
Removable arch
Irrigation
Choice of
instrument
Programs
Purge,
PiezoTouch™
Progressive power regulation:
Ultrasonics and motor
Rotation direction
PiezoTouch™
In Newtron function, the ultrasonic power in
progressive varies between 1 and 10 in each
mode.
D1 to D3, the ultrasonic power delivered will
vary between D3 – (01) and the power
selected by the user (mode and fine
adjustment).
In D4 the ultrasonic power will only vary from
1 to 5 depending on the fine adjustment
selected by the user.
Optimal disinfection and asepsis
Designed for use under the most demanding
clinical conditions.
All accessories (cords, handpieces, motor,
tips…) can be autoclaved at 134°C for 18
minutes.
Clinical cases
Clinical cases
Clinical cases
Clinical cases
Coming soon!
Clinical cases
Competition
Implant Center 2
Implant Center
Surgisonic Moto
INTRAsurg 1000 Air
FEATURES
Company
SATELEC
SATELEC
ESACROM
KAVO
Technology
Handpieces
Piezotome = Pre-implant surgery Piezotome = Pre-implant surgery
Surgysonic2 = Pre-implant surgery
I-SURGE = Implant surgery
I-SURGE = Implant surgery
Moto = Implant surgery
Newtron = All conventional
Newtron = All conventional
treatments
treatments
Soniclex Bone --> Pre-implant
surgery
SONICflex --> Scaling
Air-driven
Maximum Output Power
(measured)
60 Watts - Yield of Power 90%
20 Watts - Yield of Power 90%
Not measured, average
Weak
Autoclavable LED handpiece
YES (100 000 Lux)
NO
NO
NO
PiezoTouch - progressivity in
ultrasonics
YES
NO
NO
NO
Frequency
High: 28 000 - 36 000 Hz
High: 28 000 - 36 000 Hz
High: 24 000 - 32 000 Hz
Low: 6 000 Hz
Linear tip movement
YES
Controlled and linear
Very precise and easy to control
YES
Controlled and linear
Very precise and easy to control
AVERAGE
NO
Variability - Elliptical movement
Very hard to control
Very high precision
YES
YES
NO
NO
Cruise Control
YES
YES
NO
NO
I-SURGE
I-SURGE
MOTO
INTRAsurg 300 plus
YES
YES (Piezo)
YES
YES (Piezo)
YES (they claim)
YES (Piezo)
YES
NO (Sonic)
YES
100 - 40 000 rpm
YES
100 - 40 000 rpm
NO
200 - 40 000 rpm
NO
300 - 40 000 rpm
6 N.cm
6 N.cm
3 N.cm (very low)
5.5 N.cm
2 peristaltic pumps
Motor
Brushless motor
Ultrasonics
The widest speed rotation
range on the market
Torque
Ergonomics
Pumps
Touch screen
Multi-function footswitch
Handpiece cord length
2 peristaltic pumps
2 peristaltic pumps
1 peristaltic pump
YES (very fine and easy settings)
NO
NO
NO
YES (new weighted footswitch)
YES
YES
YES
2m or 2.9m on option
2m
2m
2m
Power ultrasonics in version:
One device for a new
approach to implantology