MTX TERMINALS

advertisement
MTX TERMINALS
Cinterion WM embedded.
Matrix Electronica, SL
Oct 2011
Project Overview

Matrix Electronica has design and developed
following modem terminals GSM/GPRS –
UMTS/HSDPA for M2M market
1)
MTX-65i. GSM/GPRS terminal with I/O expansion and
JAVA embeded applications
MTX-65+G. Combi GPS + GSM/GPRS with JAVA
embedded application
MTX-65-ULP Ultra Low Power mode (2,5uA “sleep”)
MTX-H25+PLUS. HSDPA terminal (UMTS – 3G+)
MTX-HSDPA-EU3. HSDPA
MTX-HSPA-PH8+G. HSPA terminal
MTX-IND Industrial Featured terminal
2)
3)
4)
5)
6)
7)
COMMON Mechanical & Electrical Specifications








Enclosure dimensions 78,1 x 66,8 x 37,2 mm ;
2 Mounting holes
SIM Card Holder
Audio input 6p4c-pin RJ12 connector, can use Handset RJ9.
Power connector 6-pin RJ12 connector
Wide range power supply: 6 to 32Vdc
RF antenna connector: FME-M
USB port: MINI-USB (type B) connector.
ONLY MTX-65i / MTX-65ULP
 RS232 Data connector (Standard DB9-F)
 I/O connector in HD DB15: SPI/I2C--I/O-SECOND RS232
MTX-65+G:
 RS232 and I/O + SPI/I2C in a HD DB15 connector
 GPS antenna connector: SMA F
MTX-63i & MTX-65i

MTX-65i. GSM Quad Band with 2 serial
RS232 & USB


–
I/O expansion
JAVA embedded applications
Cinterion TC65i inside
MTX-65i layout
99% SMD TECHNOLOGY
COMMON & EASY TO FIND & USE
CONNECTORS
I/O DB15
Mini USB
RS232 DB9
Audio
ANT FME
POWER
MTX-65i Mechanical & Electrical Specs
MTX-65i Mechanical & Electrical Specs
MTX-65i Expansion - I/O DB15 Connector Pin out
•
I2C bus or SPI bus (for Memory ,
displays, keyboard…)
•
2 wires RS232 Second UART
•
4 General Input/Outputs
•
2 Analog Input (ADC)
•
1 Analog Output (DAC) - PWM
•
VEXT Output
TC65i Device Features
•Quad Band GSM /GPRS
GSM 850, E-GSM 900, DCS 1800, PCS 1900
Class 4 (2 W) for GSM850 & EGSM900
Class 1 (1 W) for GSM1800 & GSM1900
•Control via AT commands
•TC65i Power consumption:
•Power down 60 uA
•Sleep mode (registered DRX=5) 17 mA
•Speech mode (average) 250 mA
•GPRS class 12 [Power reduction = 6dB]
(average) 480 mA
•Temperature range
•Operation: -30°C to +75°C
•Switch off: +80°C
•Storage: -40°C to +85°C
•Weight: < 190 g
GPRS data transmission:
GPRS class 12
Mobile station class B
Coding schemes CS 1-4
CSD data transmission:
USSD support
GSM Supplementary Services
Specification for SMS:
Point-to-point MO and MT
SMS cell broadcast
Text and PDU mode
Specification for fax:
Group 3, class 1, 2
Specification for voice:
Triple-rate codec HR, FR, & EFR
Adaptive multi-rate AMR
Basic hands-free operation
Echo cancellation
Noise reduction
MTX-65 i, 65+G, 65-ULP & IND
Java Embedded Applications


Allow save external hosts processor, space, power
consumption…
Open application resources:
–
–
–

Java™ features:
–

ARM© Core, Blackfin© DSP
Memory: 400 KB (RAM) and 1.7 MB (Flash)
Improved power-saving modes
J2ME™ profile IMP-NG
Over-the-air update:
–
–
Application SW: OTAP
Firmware: FOTA
FREE SDK
Software Development kit
MTX-65ULP (Ultra Low Power)
Ultra Low Power means that GSM module is switched
off. Only an internal RTC is powered (battery operated,
do not need power supply).
 ULP Power consumption 2.5uA Typical
 Can be waked-up by programmed alarm or interrupt
inputs (4) .
 Typical application is remote
battery operated metering
 JAVA embedded applications
Same aspect as MTX-65

TC65 & TC65i inside
MTX-65+G-V3

COMBO Module inside Cinterion XT65
–
*GSM: Quadband GSM-GPRS Class 12.
*GPS: Antaris chipset. 16 Channels
– Integrated TCP-IP stack
– JAVA embedded applications
– Interfaces:
 1 RS232 serial port (4 wires)
 4 Input/Outputs
 2 Analog Inputs
 I2C or SPI port
– Automatic Restart after shutdown.
– Inputs/Output optoislolated (3+3)
MTX-65+G-V3 Aspect
MTX-65+G-V3 Aspect
MTX-65+G V3 Main & Expansion I/O Connector
•
I2C bus or SPI bus
•
4 wires RS232 main UART
•
4 General Input/Outputs
•
2 Analog Input (ADC)
6. I2CDATSPIDO
11. IO 2
2. RD0
7. RTS
12. IO 4
3. TD0
8. CTS
13. SPIDI
4. IO 1
9. ADC 2
14. GND
5. IO 3
10. SPICS
15. ADC 1
MTX-65+G-V3: Specification for GPS










Receiver 16 channel, L1 1575.42 MHz
Accuracy Position: 2.5 m CEP; 5.0 m SEP
Position with DGPS/SBAS: 2.0 m CEP; 3.0 m SEP
GPS dedicated AT commands
Support of SBAS (WAAS/EGNOS) data
GPS active antenna supply: 3.0 V
A-GPS enabled
Tracking sensitivity: -157 dBm (with external antenna)
Date WGS-84
Start-up Time
-

Hot start: < 3.5 s
Warm start: 33 s
Cold start: 34 s
Protocols: NMEA-0183 V2.3, RTCM protocol V2.2, UBX binary
protocol
NEW MTX-65+G-V5+B

Added
–
–
–
–

Hardware watchdog
Accelerometer (can be used to wake-up terminal)
EEPROM 1Mb
Internal BATTERY 1600mA/h
FUTURE MTX-65+G-V6
–
Same as V5 but XT65 replaced by TC65i-x and
Trimble C1216 GPS
MTX-65+G-V5+B block diagram
MTX-H25+PLUS General Features
CINTERION HC25 inside
•HSDPA/UMTS 850, 1900, 2100 MHz
HSDPA data transmission max. 3.6 Mbps (DL), max. 384 kbps (UL)
UMTS data transmission max. 384 kbps (DL), max. 384 kbps (UL)
• EDGE/GPRS 850, 900, 1800, 1900 MHz
EDGE data transmission class B, 10: max. 236,8 kpbs (DL), max. 118
kbps (UL)
• GPRS multi-slot class 10
GPRS data transmission class B,10: max. 85.6 kbps (DL), max. 42.8 kbps
(UL)
• Improved power-saving modes
- Power down 50 μA
-Average < 970mA (HSDPA data transfer)
-NDIS/USB driver for Microsoft® Windows® XP
•NDIS/RIL for Windows™ Mobile 5.0/6.0 ®
•Can be used with LINUX OS
MTX-H25+PLUS
Extra RS232 serial port
MTX-H25+PLUS
GPS (needs CMUX application) with SMA-F antenna connector
MTX-65-IND Terminal
MTX-IND is a Industrial featured GSM-GPRS modem in a
DIN-rail based and terminal block system connectors.
 Intended to use in industrial environment
 2 RS232 - RS485 - RS422 internal jumper selection
configurable bus
 4 Relays 1P1C 250VAC-8A
 Input power 12-24 VAC
or 12-30 VDC
 Optoisolated inputs
& outputs

–
TC65i inside
MTX-65-IND Terminal








USB (mini B type)
SPI/I2C expansion bus
4 optoisolated digital inputs
2 digital configurable inputs/outputs
2 analog 0-2.4V or 0-20mA configurable inputs
SIM holder
FME connector for GSM Antenna
Internal expansion connector for internal
communication cards
–
Can acommodate Coronis Wavecard, for metering application
MTX-IND custom
Concentrator for telemetry purpose.
•220 AC power
•Coronis RF
Wavecard
•IP65 housing
NEW UMTS TERMINAL MTX-HSDPA-EU3

Cinterion EU3 inside
1 serial port RS232 460Kbps.
1 USB port. Serial and USB simultaneously
900 MHz UMTS / 2100 MHz UMTS bands
TCP-IP stack
GPIO (4) and ADC

In production





NEW UMTS TERMINAL MTX-HSDPA-EU3
NEW UMTS TERMINAL MTX-HSPA-PH8+G








Cinterion PH8 inside
HSPA+ 14.4Mbps UL– 5.76Mbps DL
1 serial port RS232 920Kbps.
1 USB port. Serial and USB simultaneously
PH8: 850/800, AWS1700, 1900 and 2100 MHz
PH8-P: 850/800, 900, 1900 and 2100 MHz UMTS bands
TCP-IP stack
Improved GPS, AGPS, storage of NMEA data
Prototypes available
NEW UMTS TERMINAL MTX-HSPA-PH8+G
Applications
Competitive Advantages
•
Small Size
•
Weight light.
•
Extra Input/Output and RS232-I2C-SPI ports on MTX65I
•
Audio Interfaces.
•
Voice & Data Simultaneously on 3G terminals
(UMTS-HSDPA)
•
Standard common connectors: RJ 12, D-Sub, USB, FME…
•
TCP-IP stack integrated (MTX-65i /+G, MTX-EU3, MTX-PH8)
•
High Quality
•
Very competitive PRICE
•
Full range of accessories available
•
Custom design under request
MTX-TUNNEL

MTX-TUNNEL is mainly an application running on MTX65i, MTX-65ULP or MTX-IND similar as RS232-GPRS
Gateway: all the data at the serial port is sent by GPRS
and viceversa, in transparent mode.
MTX-TUNNEL V5

GPRS-SERIAL TUNNEL
–
–
–

GPRS connection modes:
–
–
–
–
–
–


TCP Client
TCP Server
UDP Client / Server
Permanent mode
Under request (SMS or lost call, authorized or not phone numbers)
Change on an input digital level
An analog input is out of selected level window (MIN, MAX)
Serial data present on RS232/RS485 port
Scheduled date/hour timing
WebServer
Telnet
MTX-TUNNEL V5



SMS Alarms (digital input change detection)
SMS Relay control
IPs dynamic resolution:
–
–
–








DynDNS
Private DNS
SMS
SSL Security
Firewall IP
User API
Telemetry: GPIOs & ADCs (GPRS, SMS, RF868MHz)
GRPS-I2C/SPI tunnel
Serial RS232/485 – HTTP tunnel
Serial RS232/485 – SMS tunnel
Timing synchronization
MTX-TUNNEL V5 – Sample scenarios
• Mode TCP Server, TCP client or UDP
MTX-TUNNEL V5 – Sample scenarios
• 2 RS232 devices with only 1 MTX-Tunnel & SIM
• Turn On/Off relays through GPRS or SMS
MTX-TUNNEL V5 – Sample scenarios
• Sending dynamic IP to DynDNS or Private DNS
server
MTX-TUNNEL V5 – Sample scenarios
• Serial cable replacer RS232-GPRS-RS232
• Gateway ModBusTCP / ModBus RTU (232/485)
MTX-TUNNEL V5 – Sample scenarios
• Metering aplications. GPRS-Wavenis concentrator
Others, Documentation, support
Datasheet, manuals, drivers, etc on:
Web page:
http://www.matrix.es/mtx-terminals
FTP site: ftp://ftp.matrixelectronica.eu/MTX-Terminals/
E-mail: gsmsupport@matrix.es
5 Application engineers
European distribution network
Thank you.
Feedback:
gsmsupport@matrix.es
Download