YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
Densit a/s
44, Rørdalsvej · P.O.Box 220
DK-9100 Aalborg
Phone:
+ 45 98 16 70 11
Fax:
+ 45 99 33 77 88
E-mail:
mail@densit.com
Website:
www.densit.com
DENSIT A/S
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 In 1972 the cement plant Aalborg Portland launches the development project
“new concrete” based on the assumptions that it is possible to develop cementbased materials with ultra high strength and durability
DENSIT A/S
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 The Densit® technology or the DSP-technology is invented and
Concrete Densit®
developed (DSP – Densified Systems with ultra-fine Particles)
CEMENT PASTE
(Cement particles and water)
w/c = 0,50-0,70
Microstructure
0.01 mm
0.01 mm
SUPER PLASTIZISED CEMENT PASTE
(Cement particles, Superplastiziser and water)
w/c = 0,30-0,35
Thin section
1 mm
1 mm
DSP TECHNOLOGY
(Cement, Microsilica, Superplastiziser and water)
w/p = 0,18-0,22
Fracture surface
10 mm
DENSIT A/S
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 In 1978 the Densit® technology is patented
Compressive strength and porosity
DENSIT A/S
Development of compressive strength
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 In 1983 Densit a/s is established as an independent company
 Densit is owned by Illinois Tool Works Inc.
 Today Densit exports 85% of its products to more than 30 countries world-wide
 Through out the world Densit has a wide network of partners and trained applicators
with thorough knowledge and experience with Densit® products and solutions
 Subsidiary
Densit Asia Pacific, Malaysia
 Sales office
Densit Germany
 Joint Venture
USA
DENSIT A/S
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
Densit a/s fulfils the needs
of specific market
segments for reinforcement
of areas exposed to severe demands
which are
critical to the end user’s activities
MISSION STATEMENT
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 Densit values
 Co-operation
 Competence
 Responsibility
Each Densit® product, service and the way we act towards our customers and
colleagues reflect our commitment to the three Densit values
 Customer policy
 We speak from more than 20 years experience and with a global understanding
 We respond to our customers quickly wherever they are in an approachable
and friendly way
MISSION STATEMENT
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 Densit a/s has 20 years of experience in developing and selling high performance
solutions based on our high strength and durable cement-based products
 The Densit® high performance solutions are well-established solutions in the
following business areas:
Industrial Flooring
and Pavements
BUSINESS AREAS
Reinforcement of offshore Offshore wind
turbine foundations
oil & gas platforms
Security Barriers
Wear Protection
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
INDUSTRIAL FLOORING AND PAVEMENTS
 Airports
 Ports
 Warehouses- and distribution centres
 Fresh food industry
 Heavy & light industry
 Parking areas are subjected to heavy traffic
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
INDUSTRIAL FLOORING AND PAVEMENT-PRODUCTS
 Densitop®:
Densitop® ST (5-8 mm):
 Ferrotop™
Ferrotop™ (23-35 mm)
Densitop® MT (8-12 mm):
Densitop® LT (15-25 mm):
 Densiphalt®:
Standard
All flooring products can by dyed in red, yellow, green or white
All flooring products can be sand saturated to increase the skid resistance
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
WHAT MAKES DENSIT® FLOORING SOLUTIONS THE NATURAL CHOICE:
 High wear resistance
 No joints
 High bearing capacity/resistant to point loads
 High impact resistance
 Impermeability
 Resistance to freeze-thaw cycles
 Ease of cleaning
 Dust-free surface
 Ability to withstand steam cleaning
 Fast installation operational in occupation time
 Early trafficking – 24 hours at 20°C
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
OFFSHORE – OIL & GAS
 Reinforcement of offshore oil and gas platforms
 Extending lifetime of platform
 Cost-effective structural repair
 Upgrading of platform
 Corrosion protection
 Flexible and fast installation
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
OFFSHORE - WIND
 Offshore wind turbine foundations
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
WEAR PROTECTION
 Cement plants
 Coal-fired power stations
 Steelworks
 Paper plants
 Mineral sand - Processing
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
DENSIT® WEAR PROTECTION SOLUTIONS OFFER UNIQUE PROPERTIES LIKE:
 High erosive and abrasive wear resistance
 Ability to be formed in any shape without
vulnerable joints
 Seamless graduation in lining thickness
within a component
 High thermal resistance
 Flexibility in installation in components with
complex geometry
 Mechanical reinforcement ensuring that
linings do not become dislodged
 Quick usable
 Quick installation time
The Densit® wear protection products can be either trowelled, cast or sprayed.
Pre-lined components and insulation are also options.
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
SECURITY BARRIERS
 Automatical teller machines (ATM’s)
 Safes
 Vaults
BUSINESS AREAS
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
 Densit a/s aims at continuous growth by:
 Expanding the network of qualified partners within the core business areas over
an increasing geographical area in order to serve the customers in the best way
 Maintaining the technological leading position
 Using at least 5% of the annual turnover for product development and research
 Continuously developing new products and concepts based on customers
requirements
VISION
YOUR PARTNER FOR HIGH PERFORMANCE SOLUTIONS
MARKETING
HUMAN RESOURCES
BUSINESS
DEVELOPMENT
FINANCE/IT/
SALES
OFFSHORE
INDUSTRIAL
FLOORING
WEARPROTECTION
SECURITY
PRODUCTION/QA
DENSIT ASIA
PASIFIC,
MALAYSIA
 Densit a/s has more than 80 employees
ORGANISATION
DENSIT
GERMANY
JOINT
VENTURE;
USA