Corporate Overview
•
Privately Held Company
•
Established in 1991
•
Manufacturing and Distribution in:
– North America (WI)
– Europe (Sweden)
– Asia (Hong Kong)
•
Yearly Growth Rate of 12-20%
•
All Development in House
•
All Key Manufacturing in House
Company Target
“Nimco aims at becoming the leading supplier of
Electrical and Hydraulic Control Systems
for customers that understand and value exact motion control
and use this feature to increase their competitiveness.”
Manufacturing
•
Highly Automated Process
– Valve Bodies run 20-22 hours/day
– 6 Full Production Days Per Week
•
Large CNC Machining Centers
•
Advanced Measurement Equipment for
Quality Inspection
•
100% Testing of All Products Before
Dispatch
•
Lab testing and research facilities
Research and Development
•
All Design is made in SolidWorks®
–
All Design Engineers with M.Sc. In Hydraulics
–
Broad Knowledge of Valve and Motion Technology for Both Open Center
and Load Sensing Systems
Open Center Spool Technology
Minimized Internal Spool Leakage
-
Specially Developed High Precision Honing Method
-
High Precision Hard Chrome Centerless Grinded Spools
-
Radial Spool Grooves to Center the Spool in the Bore
Application Example – Front End Loader
SVL
CV152
CV452
WK300
Front Loader Valves
CV112 – Front Loader Valve
2 Section Monoblock
Design
Flow Range
50 l/min
13 USgpm
Max. Pressure
320 bar
4600 psi
Open Center
Closed Center
Pressure on Demand LS
Circuits
BSP G3/8”
Port Sizes
Manual Hand Lever
• Cable Control
• Mechanical Joystick
• El. Hydr. Prop.
Controls
•
Accessories
•
High Pressure Carry Over
SAE #6
CV152 – Front Loader Valve
2 Section Monoblock
Design
Flow Range
70 l/min
18 USgpm
Max. Pressure
320 bar
4600 psi
Open Center
Closed Center
Pressure on Demand LS
Circuits
BSP G3/8”
Port Sizes
SAE #6
Manual Hand Lever
• Cable Control
• Mechanical Joystick w. Locking Mech.
Controls
•
Accessories
•
High Pressure Carry Over
• Quick Coupler
CV432 & CV432S – Front Loader Valve
2 Section Monoblock
Design
Flow Range
Max. Pressure
100 l/min (OC)
70 l/min (S)
26 USgpm (OC)
18 USgpm (S)
320 bar
4600 psi
Open Center (CV432)
Series Circuit (CV432S)
Circuits
BSP G1/2”
Port Sizes
SAE #8
Manual Hand Lever
• Cable Control
• Mechanical Joystick w. Locking Mech.
Controls
•
Accessories
•
High Pressure Carry Over
CV452 – Front Loader Valve
2 Section Monoblock
Special Purpose Valve
Design
Flow Range
Max. Pressure
110 l/min
29 USgpm
320 bar
4600 psi
Open Center
Closed Center
Pressure on Demand LS
Circuits
BSP G1/2”
Port Sizes
SAE #10
Manual Hand Lever
• Cable Control
• Mechanical Joystick w. Locking Mech.
Controls
•
Accessories
•
Anti Shock Valves
• Anti Cavitation Valves
• High Pressure Carry Over
• Multi Quick Coupler
EPCV452 – Front Loader Valve
2 Section Monoblock
Special Purpose Valve
Design
Flow Range
Max. Pressure
110 l/min
29 USgpm
320 bar
4600 psi
Open Center
Closed Center
Pressure on Demand LS
Circuits
BSP G1/2”
Port Sizes
Controls
•
Accessories
•
SAE #10
El. Hyd. Prop.
Available with pressure amplifier for
tractors with low-stand by-pressure
(EPCV452-LSP)
• Anti Shock Valves
• Anti Cavitation Valves
• High Pressure Carry Over
• Multi Quick Coupler
CV652 – Front Loader Valve
2 Section Monoblock
Special Purpose Valve
Design
Flow Range
Max. Pressure
120 l/min
32 USgpm
320 bar
4600 psi
Open Center
Closed Center
Pressure on Demand LS
Circuits
BSP G1/2”
Port Sizes
SAE #10
Manual Hand Lever
• Cable Control
• Mechanical Joystick w. Locking Mech.
Controls
•
Accessories
•
Anti Shock Valves
• Anti Cavitation Valves
• High Pressure Carry Over
• Multi Quick Coupler
EPCV652 – Front Loader Valve
2 Section Monoblock
Special Purpose Valve
Design
Flow Range
Max. Pressure
120 l/min
32 USgpm
320 bar
4600 psi
Open Center
Closed Center
Pressure on Demand LS
Circuits
BSP G1/2”
Port Sizes
Controls
•
Accessories
•
SAE #10
El. Hyd. Prop.
Available with pressure amplifier for
tractors with low-stand by-pressure
(EPCV452-LSP)
• Anti Shock Valves
• Anti Cavitation Valves
• High Pressure Carry Over
• Multi Quick Coupler
Circuit Selector
Valves
SVK
6/2 Circuit Selector
Bankable up to three units
Design
Flow Range
50 l/min
24 USgpm
Max. Pressure
280 bar
4100 psi
Circuit Selector
Circuits
BSP G3/8”
Port Sizes
SAE #6
Controls
•
Direct Acting Solenoid 12/24 VDC
Accessories
•
Bolt-On Cross Over Relief Manifold
SVB
6/2 Circuit Selector
Bankable up to three units
Design
Flow Range
90 l/min
24 USgpm
Max. Pressure
280 bar
4100 psi
Circuit Selector
Circuits
BSP G1/2”
Port Sizes
SAE #8
Controls
•
Direct Acting Solenoid 12/24 VDC
Accessories
•
Bolt-On Cross Over Relief Manifold
SVL
6/2 Circuit Selector
Special Purpose Valve
Bankable up to two units
Design
Flow Range
90 l/min
24 USgpm
Max. Pressure
280 bar
4100 psi
Circuit Selector
Circuits
BSP G3/8”
BSP G1/2”
Port Sizes
Controls
•
Accessories
•
SAE #6
SAE #8
Direct Acting Solenoid 12/24 VDC
Cross Over Relief Valves
• Soft Ride Activation Valve
- Electrical or Manual
• Electrical Tool Locking Valve
Controls
WK300 – Wire Control
Wire Control Joystick – 1 or 2 axis
Design
Key Features
Reinforced Ergonomic Handgrip
• Up to 3 El. Switches (6 A)
• Easy to reach locking mechanism
• Possibility to integrate customized logo
or movement diagram on top of the handle
• Robust and maintenance free
• Easy to assemble
• Possible to change the number of El.
Switches
•
Epc 300
Design
Signals
2-Axis Joystick
Supply Voltage
Output
10-30 VDC
4-20 mA
4,5-5,5 VDC
0,5-4,5 VDC
10-30 VDC
0,5-4,5 VDC
Angular
Operating
Range
X- and Y-axis: ±20°
Options
1 or 3 El. Push Buttons
CC8
Design
Analogue Joystick Control Card
Supply Voltage
•
10-30 VDC
Inputs
•
8 Analogue Inputs (0-5 VDC)
Outputs
•
CAN-bus
Interface
•
2.0 B - 150 Hz
Protection
Class
•
IP67 (In Standalone Version)
CAN-Bus Protocol
• 5 VDC Reference Supply to Joystick
EDB 8-64
Design
I/O Driver Box 4+4 PWM
Supply Voltage
10-30 VDC
Inputs
CAN-Bus Protocol
Outputs
8 (4+4) PWM
Current
Feedback
100 – 1800 mA
CAN-bus
Interface
2.0 B – 150 Hz
Chopper Freq.
30/200 Hz
Protection
Class
IP67
EDB 16-64
Design
I/O Driver Box 8+8 PWM
Supply Voltage
•
Inputs
•
Outputs
•
Current
Feedback
•
100 – 1800 mA
CAN-bus
Interface
•
2.0 B – 150 Hz
Chopper Freq.
•
30/200 Hz
Protection
Class
•
IP67
10-30 VDC
CAN-Bus Protocol
• 8 Analogue Inputs (0-5 VDC)
16 (8+8) PWM Outputs
• 1 Relay Output (4A)
EasyProg™
•
Programming Software for Nimco Electronic Modules
– Easy to Use and Intuitive
– Logic Based Programming
– Windows Based
– Available in Three Languages
• English
• German
• Swedish
– Possibility to Remote Connect to System via GSM-Link
• Trouble Shooting and Analysis
• Maintenance and Update