FURNITURE 32MM SYSTEM
A BRIEF INTRODUCTION
KPL CHINA SOURCING CO., LTD.
Mail: info@kplchinasourcing.com
Website: www.kplchinasourcing.com
Furniture 32mm System Introduction
32mm System is an industrial standard which has been agreed by furniture and furniture fittings
manufacturers worldwide. It originates from the center to center spacing of the drill pattern.
Basic Rules
1. System hole diameter: Ø5mm
2. Hole spacing: 32mm
3. Distance between center of hole line and front
edge of side panel: 37mm
4. Distance between rear hole center line and rear
edge of side panel: 37mm
5. The first and last hole in a hole line should be
the same distance from the top and bottom
edges of side panel
Furniture 32mm System Introduction
32mm System Advantages
1. Suitable for mass production, improve production effectiveness, reduce cost
2. Reduce new product design and development cycle time by using standardized furniture
fittings
3. Improve hole position accuracy, improve furniture quality
4. Furniture fittings interchangeable from different manufacturers
5. Make KD(knock-down) furniture and DIY easier
Furniture fittings designed to 32mm system
1. Metal shelf support
Shelf support diameter is designed equal to side panel drilling hole diameter: Ø5mm
Furniture 32mm System Introduction
2. Concealed hinge
1. Mounting plate 2 fixing holes center distance: 32mm
2. Hole center line to the front edge of side panel distance: 37mm
3.
Side panel drilling hole: Ø5mm
Furniture 32mm System Introduction
3. Drawer runner
1. Fixing hole center to the front edge of side panel distance: 37mm
2. Fixing hole spacing patten is: 32mm system
3. Side panel drilling hole: Ø5mm
The End
The End !