ELASTOLIQUID STRONG
Marking
Reference standard:
EN1504-2
DECORATIVE, WATERPROOFING, FIBRE-REINFORCED ELASTOMERIC
WATER-BASED COATING
FOR PROTECTING CONCRETE SURFACES
AND OLD WATERPROOFING OF EXPOSED ROOFS
USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY
• CAMPI D’IMPIEGO.
è consigliato per impermeabilizzare muri di fondazione in calcestruzzo.
• MODALITÁ D’IMPIEGO.
La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le
parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e
secche, è consigliabile la stesura una mano di diluita al 30% con acqua. va
mescolato prima dell’uso con trapani mmani di prodotto. Non eccedere nel consumo
per mano per non l’evaporazione dell’acqua contenuta nel prodotto applicato.
• CONSUMI.
0,500 kg/m2 per mano.
I
GB
D
F
NL
ONE-COMPONENT
A
MONOCOMPONENTE
TO BE APPLIED
BY BRUSH
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
TO BE MEHANICALLY
MIXED
SPRAY
APPLICATION
TO BE APPLIED BY
PLASTERING TROWEL
APPLICARE A
SPRUZZO
APPLICARE CON
FRATTAZZO
H2O
MESCOLARE
MECCANICAMENTE
MINIMUM APPLICATION
TEMPERATURE
KEEP AWAY
FROM FROST
+ 5ϒC
APPLICARE CON
PENNELLO
GB
WATER-BASED ELASTOMER/BITUMINOUS COATING
WATER BASED
VEICOLO ACQUA
TO BE APPLIED
BY ROLLER
APPLICARE CON
RULLO
TEMPERATURA MIN.
DI APPLICAZIONE
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
USE SUITABLE
PROTECTION
D.P.I.
STOCCAGGIO:
TEME IL GELO
I
UTILIZZARE DISPOSITIVI
DI PROTEZIONE INDIVIDUALI
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
D
F
NL
37060 Castel d’Azzano - Verona - ITALY
Partita
kg
e
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY
• CAMPI D’IMPIEGO.
è consigliato per impermeabilizzare muri di fondazione in calcestruzzo.
• MODALITÁ D’IMPIEGO.
La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le
parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e
secche, è consigliabile la stesura una mano di diluita al 30% con acqua. va
mescolato prima dell’uso con trapani mmani di prodotto. Non eccedere nel consumo
per mano per non l’evaporazione dell’acqua contenuta nel prodotto applicato.
• CONSUMI.
0,500 kg/m2 per mano.
I
GB
D
F
NL
ONE-COMPONENT
A
MONOCOMPONENTE
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
TO BE MEHANICALLY
MIXED
I
GB
WATER-BASED ELASTOMER/BITUMINOUS COATING
WATER BASED
SPRAY
APPLICATION
TO BE APPLIED BY
PLASTERING TROWEL
APPLICARE A
SPRUZZO
APPLICARE CON
FRATTAZZO
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
D
H2O
VEICOLO ACQUA
MESCOLARE
MECCANICAMENTE
TO BE APPLIED
BY BRUSH
TO BE APPLIED
BY ROLLER
MINIMUM APPLICATION
TEMPERATURE
APPLICARE CON
PENNELLO
APPLICARE CON
RULLO
TEMPERATURA MIN.
DI APPLICAZIONE
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
KEEP AWAY
FROM FROST
USE SUITABLE
PROTECTION
STOCCAGGIO:
TEME IL GELO
UTILIZZARE DISPOSITIVI
DI PROTEZIONE INDIVIDUALI
+ 5ϒC
D.P.I.
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
F
NL
kg
e
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
GRANTS LEED CREDITS
CHARACTERISTICS
ONE-COMPONENT
WATER
BASED
ENVIRONMENTAL
WATERPROOFING
METHOD OF USE
MIX
MECHANICALLY
ECO GREEN
PROBLEM
WATERPROOFING
CONCRETE SURFACES
SUBJECT TO LIGHT FOOT
TRAFFIC
SPRAY
APPLICATION
APPLY BY
BRUSH
SOLUTION
ELASTOLIQUID STRONG is a ready-to-use
elastomeric, waterproofing coating. It contains synthetic polymers dispersed in water and added special fibres which increase
resistance to continuous foot traffic and to
mechanical stresses in general. After drying,
ELASTOLIQUID STRONG forms a strong film
that sticks perfectly to the manufactured structures on which it is applied.
APPLICATION FIELDS
AC C
OR
ELASTOLIQUID STRONG is recommended
for covering and waterproofing concrete roofs.
It can also be used for waterproofing concrete
terraces before stoneware or clinker tiles are
G TO
DIN
EU R O P E
EN
C
AN
RMS
NO
Traditional waterproofing liquid membranes
cannot withstand continuous foot traffic and
are not resistant to high mechanical strain in
general.
PI-MC-IR
1504-2
PROTECTIVE
COATING
CONCRETE SURFACES
PROTECTION
PRECAUTIONS
APPLY BY
ROLLER
STORAGE:
KEEP AWAY FROM FROST
bonded on, and, generally, on surfaces with
complex geometrical shapes, where polymer
bitumen membranes cannot be applied.
ELASTOLIQUID STRONG is suitable for waterproofing terraces with floors made of: concrete,
polymer bitumen membranes self-protected
with slate granules or mineral grit. On old polymer bitumen membranes or bitumen coverings,
the adhesion varies according to the degree of
ageing of the covering itself. In the above case
it is necessary to check the adhesion of ELASTOLIQUID STRONG prior to application.
ADVANTAGES
E
• Greater resistance to foot traffic and
mechanical stresses.
• Reduces degradation due to carbonation of
concrete.
• Excellent resistance to UV rays.
• It is non-flammable.
• Non-toxic product.
METHOD OF USE
• SURFACE
1
PREPARATION
The surfaces must be
clean, dry and free from
impurities and dust. Any
holes, cracks or other
cavities must be evened
off with RESISTO UNIFIX
mortar (1) and any artificial slopes to drain rainwater must be remade.
• MIX PREPARATION
For very crumbly and dusty surfaces, it is recommended to apply ELASTOLIQUID diluted
with 30% water. ELASTOLIQUID STRONG
must be mixed carefully in the packet before
use. The product is ready to use and dilution
with water is not recommended; if necessary
dilute with maximum 10% water (2).
• APPLICATION
It can be applied with a roller, spatula or brush
(3). The surfaces to be painted must have a
minimum slope so that all the rain water can
2
3
USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY
• CAMPI D’IMPIEGO.
è consigliato per impermeabilizzare muri di fondazione in calcestruzzo.
• MODALITÁ D’IMPIEGO.
La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le
parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e
secche, è consigliabile la stesura una mano di diluita al 30% con acqua. va
mescolato prima dell’uso con trapani mmani di prodotto. Non eccedere nel consumo
per mano per non l’evaporazione dell’acqua contenuta nel prodotto applicato.
• CONSUMI.
0,500 kg/m2 per mano.
I
GB
D
F
NL
ONE-COMPONENT
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
TO BE MEHANICALLY
MIXED
SPRAY
APPLICATION
I
USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY
• CAMPI D’IMPIEGO.
è consigliato per impermeabilizzare muri di fondazione in calcestruzzo.
• MODALITÁ D’IMPIEGO.
La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le
parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e
secche, è consigliabile la stesura una mano di diluita al 30% con acqua. va
mescolato prima dell’uso con trapani mmani di prodotto. Non eccedere nel consumo
per mano per non l’evaporazione dell’acqua contenuta nel prodotto applicato.
• CONSUMI.
0,500 kg/m2 per mano.
GB
WATER-BASED ELASTOMER/BITUMINOUS COATING
WATER BASED
TO BE APPLIED BY
PLASTERING TROWEL
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
I
GB
D
F
D
MONOCOMPONENTE
VEICOLO ACQUA
MESCOLARE
MECCANICAMENTE
TO BE APPLIED
BY BRUSH
TO BE APPLIED
BY ROLLER
MINIMUM APPLICATION
TEMPERATURE
APPLICARE CON
PENNELLO
APPLICARE CON
RULLO
TEMPERATURA MIN.
DI APPLICAZIONE
APPLICARE A
SPRUZZO
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
APPLICARE CON
FRATTAZZO
KEEP AWAY
FROM FROST
USE SUITABLE
PROTECTION
STOCCAGGIO:
TEME IL GELO
UTILIZZARE DISPOSITIVI
DI PROTEZIONE INDIVIDUALI
+ 5ϒC
NL
ONE-COMPONENT
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
kg
e
TO BE MEHANICALLY
MIXED
SPRAY
APPLICATION
I
GB
WATER-BASED ELASTOMER/BITUMINOUS COATING
WATER BASED
TO BE APPLIED BY
PLASTERING TROWEL
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
D
MONOCOMPONENTE
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
VEICOLO ACQUA
F
MESCOLARE
MECCANICAMENTE
TO BE APPLIED
BY BRUSH
TO BE APPLIED
BY ROLLER
MINIMUM APPLICATION
TEMPERATURE
APPLICARE CON
PENNELLO
APPLICARE CON
RULLO
TEMPERATURA MIN.
DI APPLICAZIONE
APPLICARE A
SPRUZZO
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
APPLICARE CON
FRATTAZZO
KEEP AWAY
FROM FROST
USE SUITABLE
PROTECTION
STOCCAGGIO:
TEME IL GELO
UTILIZZARE DISPOSITIVI
DI PROTEZIONE INDIVIDUALI
+ 5ϒC
NL
37060 Castel d’Azzano - Verona - ITALY
Partita
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
F
NL
37060 Castel d’Azzano - Verona - ITALY
Partita
kg
e
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
run off, which would otherwise cause the film to
soften in the areas of stagnation. For good protection it should be applied in crossover coats;
the second coat must be applied on the film of
the first dry coat.
• CONSUMPTION
The consumption of material depends on the
nature of the support, how porous it is and the
thickness you wish to obtain. By applying two
coats, which means a consumption of 1.5-2 kg/
m², an average dry film thickness of 0.8 mm is
obtained.
Liquid waterproofing
37060 Castel d’Azzano - Verona - ITALY
Partita
• PRECAUTION
• Only apply on surfaces with good water
drainage. Do not apply on surfaces subject
to water stagnation.
• Do not apply on very hot surfaces because
the film-forming process would be accelerated excessively with negative consequences on the product’s cohesion and bonding
to the surface.
• Keep the containers sealed before use.
• Apply at temperatures between +5°C and
+35°C. Do not apply in excessively hot or
cold conditions. Do not apply when there is
a risk of the temperature falling below +5°C
while the painted film is drying.
• Do not apply in foggy weather or in very
humid conditions which delay the filming
and drying process. Do not apply the product when there is a risk of imminent rainfall
which could wash the paint that has not
dried yet.
• New, just applied bituminous surfaces usu(See following)
3rd DIVISION
TECHNICAL CHARACTERISTICS
ELASTOLIQUID STRONG
Standard
Appearance
Pasty liquid
Grey RAL 7004
Red RAL 3009
Colour
EN 2811-1
Met. interno
UNI EN ISO 3251
1.40 ± 0.05 kg/
25 000 ÷ 35 000 cps
64 ± 3%
12 months
Mix characteristics and workability
Application temperature
Application thickness
Waiting time - dust-free drying (*)
Waiting time - touch dry (*)
Application
Standard
Performance characteristics
Standard
Product performace
EN 1504-2
UNI 1109
EN 7783
EN 1542
EN 1062-3
EN 1062-6
NFT 46002
NFT 46002
C PI-MC-IR
–5°C
5 m ≤ Sd <50 m - class II
≥1.0 MPa
w < 0.01 kg/m²·h0.5
Sd >50 m
100 ÷ 250%
1.5 ÷ 3.0 MPa
–30°C ÷ +90°C
in accordance to ZA.1 note
Ultimate elongation
Ultimate tensile strength
Thermal resistance - Operating temperature
Hazardous substances
EN 1504-2
Test conditions: temperature 23±2°C, 50±5% R.H. and air velocity in test area <0.2 m/s. These data may change depending on specific site conditions: temperature, ventilation,
moisture and substrate absorbency.
(*) The times indicated will be longer or shorter as the temperature drops or rises.
Pursuant to European standard EN 1504-2 - General principles for the use of products and systems.
(See previous)
ally have superficial ‘outcrops’ of hydrocarbons, which make perfect adhesion
of film a problem. We recommend you to
paint the coverings only 6 months after
laying - this period is usually sufficient to
eliminate surface ‘outcrops’. However, just
waiting is not always enough. Therefore,
we advise making an estimate, by empirical tests with adhesive tape, in order to
evaluate the quantity of dirt and, if necessary, the adhesion of the paints (the tests
are described in the booklet entitled “The
waterproofing guide”). If the surface is dirty,
clean by brushing and wash with water.
Should it be laid on a new covering, the surface of the last layer must be slated.
• If it’s applied to sand-blasted polymer bitumen membranes laid on insulating packages it must be used in combination with
RINFOTEX reinforcement.
• After use of these products, clean the tools
with oil or other common diluents (synthetic,
oil of turpentine, nitre). Deep the tools and
avoid the product drying on them also during application.
• Keep original packaging at temperature not
lower than +5°C. Close them after use.
PACKAGING
ELASTOLIQUID STRONG
20-kg Pail
5-kg Can
4/2014ing-4/2014ita
• FOR ANY FURTHER INFORMATION OR ADVICE ON PARTICULAR APPLICATIONS, CONTACT OUR TECHNICAL OFFICE • IN ORDER TO CORRECTLY USE OUR PRODUCTS, REFER TO INDEX TECHNICAL SPECIFICATIONS •
Internet: www.index-spa.com
Informazioni Tecniche Commerciali
tecom@indexspa.it
Amministrazione e Segreteria
index@indexspa.it
Via G. Rossini, 22 - 37060 Castel D’Azzano (VR) - Italy - C.P.67
Index Export Dept.
T. +39 045 8546201 - F +39 045 518390
index.export@indexspa.it
© INDEX
socio del GBC Italia
the numerous possible uses and the possible interference of conditions or
elements beyond our control, we assume no responsibility regarding the results
which are obtained. The purchasers, of their own accord and under their own
responsibility, must establish the suitability of the product for the envisaged use.
Class and type
Cold flexibility
Permeability to acqueous vapour
Adherence test
Capillary water absorption
Permeability to CO2
+5°C ÷ +35°C
0.8 ÷ 1.00 mm (two coats)
4 ÷ 6 hours
6 ÷ 8 hours
manual or spray
The figures shown are average indicative figures relevant to current production
and may be changed or updated by INDEX at any time without previous warning.
The advice and technical information provided, is what results from our best
knowledge regarding the properties and the use of the product. Considering
Apparent density
Viscosità Brookfield
Dry residue - at 130°C
Shelf life in original packaging (dry stored)