Over 50 Times More
Powerful Than
Regular Lubricants!
Earth Friendly Technology
Xtreme
Pressure
Lubricants
Supper
Concentrated
Fuel additives
1
Environmentally Friendly
Xtreme Performance
and Environmentally Friendly!
• Plant/Vegetable-based products
• Stable
• Non-corrosive
• Non-reportable
2
Environmentally
Friendly
• Reduce energy consumption
• Vegetable based
• Reduce usage of petroleum-based lubricants
• Safe for human contact
• Minimal disposability issues
• Several products are Food grade / biodegradable
EPA APPROVED
Environmental, Health
& Safety approval
3
NSF Food Grade
certification
Core Technology
Engine Life
Treatment
Heavy Duty
Oil Stabilizer
Industrial
Oil Concentrate
Cutting Oil
Water Soluble
Cutting Fluids
Hydraulic Treatment
EP-2 Grease
Penetrating Lubricant
Motor Oil
Down hole Drilling Fluid
4
Technology
Typical
Lubricants
-
+
Bonding/flowing
Flowing
Bonding
Reaction to heat
& pressure
Migrates away
Migrates towards
Limited
Extraordinary
No
Yes
Charge
Film strength
Environmentally
friendly
5
Bottom Line Benefits
• Dramatically reduces heat & friction
6

Reduces wear to extend equipment life

Displaces moisture, prevents corrosion

Lowers energy consumption

Helps prevent costly down time

Optimizes equipment efficiency

Fewer oil changes
Four Ball Wear Test
Wear Reduction
0.45
0.44
0.43
0.445
0.42
mm
0.41
0.4
0.39
0.38
0.387
0.37
0.36
0.35
MOTOR OIL WITHOUT XPL+
7
MOTOR OIL WITH XPL+
Test Method: ASTM D-4172 40kg 1 hour @ 75oC
Make & Model: PTI M-4
Base Product: 5W-30 motor oil without XPL+ technology
Test product: 5W-30 motor oil with XPL+ technology
Four Ball Wear Test
Co-efficient of Friction
MOTOR OIL WITHOUT XPL+
MOTOR OIL WITH XPL+
8
Test Method: ASTM D-4172 40kg 1 hour @ 75oC
Make & Model: PTI M-4
Base Product: 5W-30 motor oil without XPL+ technology
Test product: 5W-30 motor oil with XPL+ technology
Bearing Friction Test
Over 50 times more powerful than regular lubricants!
9
4,000 P.S.I.
200,000 P.S.I.
Lubricants Applications
10
• Commercial – Heavy duty equipment, commercial trucking, railway &
shipping fleets
• Industrial – manufacturing, metalworking, mining, paper mills, drilling
Priority Markets
•
11
Transportation Sector – Heavy duty equipment,
Trucking, Railway & Shipping Fleets
Priority Markets
•
12
Industrial Sector – Manufacturing, Construction, Food
& Beverage, Water cooling plants, Utility & Power
generation plants
Priority Markets
•
13
Drilling and Mining Sector -Down hole Drilling, Oil
drilling and Mining operations (hard & soft)
Priority Markets
•
14
International and Local Supply & Distribution
Networks
» Existing supply or customer networks
for (Transportation, Industrial,
Manufacturing, Drilling & Mining, Oil &
gas)
» Existing distributors supplying to end
users for (Transportation, Industrial,
Manufacturing, Drilling & Mining, Oil &
gas)
»Auto supply and service centers,
hardware, mass merchandisers &
retailers
Manufacturing
Application
Machining - i.e. CNC, lathes,
grinding, boring, broaching,
drilling, tapping, milling,
sawing, stamping, etc.
ProOne Products
• BioStable (90%) and Synthetic
(10%) Water Soluble Cutting Fluids
• ACA Cutting Oil for cutting oil
applications
• Industrial Oil Concentrate
Gear boxes
• Industrial Oil Concentrate
• Multi-purpose EP-2 Grease
15
• Feeds and speeds increased anywhere from
+20% up to +500% depending on application
• Tool life extended by as much as 10 fold
• Improved surface finishes, eliminating
additional finishing steps
• Sump life extended by as much as 400%
• Down time reduced due to less wear, longer
sump life, longer tool life
• Energy reduction of 10-20%
• Less oxidation and corrosion on equipment,
pumps, tanks, etc.
• Energy savings of 10-20%
• Reduction in noise
• Wear reduced by 50-75%
• Reduction in shear factor
• XPL-101 Penetrating Lubricant
• Energy savings of 10-20%
• Protection from outside elements (rust,
corrosion protection)
• Noise reduction
Hydraulic systems
• See hydraulic systems under
Diesel Powered Equipment
• See hydraulic systems under Diesel Powered
Equipment
Pneumatic air-driven
solenoids and air tools
• XPL-101 Penetrating Lubricant
• Less downtime due to water/corrosion
• Equipment working life extended up to 5 X
Conveyor systems
• Multi-purpose EP-2 Grease
Anticipated Results
Diesel-powered
Equipment
Application
Any and all diesel and
gasoline engines including
vehicles, generators, etc.
ProOne Products
• Heavy Duty Oil Stabilizer
• Engine Life Treatment
• 15W-40 CJ4 Motor Oil
Logging gear
• Hydraulic Treatment
• Multi-purpose EP-2 Grease
• XPL-101 Penetrating Lubricant
16
Anticipated Results
• Oil change intervals extended by up to 50%
• Fuel consumption reduced by 5-10%
• Reduced oil consumption and oil burning
• Improved performance through increased
compression
• Longer working life due to wear reduction
• Less friction, 2-10% more horsepower
• More reliability and fewer breakdowns
• Extended life of drag lines and cables
• Increased safety due to extended range of
cables
• Protection from outside elements (rust,
corrosion protection)
• Greater reliability, fewer breakdowns, less
shop repair
Down hole
Drilling
Application
ProOne Products
Mud Pumps
Hydraulicing slurry
• Down hole Drilling Fluid
• Relieve heat, friction & wear on all parts
associated with hydraulicing mud/slurry
• No disposability problems
•Up to 70% reduction in friction
• Reduced torque
• No diesel fuel added to well
• Extended drill bit life
• Improved thread protection on pipe sections
All oil hydraulic systems
• Hydraulic Treatment
• Electrolysis eliminated up to 94%
• Electromagnetic field/static wear eliminated
• Water contamination in hyd. fluid minimized
• Reduction in wear, heat, friction, oxidation,
corrosion & acidity
• Operating life of the fluid extended 2-4 times
• Seals last longer
• Less downtime due to wear & tear
• Energy reduced 8-15% for light load and up
to 33% for heavy load
• Less maintenance on all pivot points
• Multi-purpose EP-2 Grease
17
Anticipated Results
XPL-101
Penetrating Lubricant
If it rolls, rubs, slides, rusts, corrodes,
seizes or collects moisture
…Use XPL-101…
The Best Liquid Tool in the Box
BOTTOM LINE BENEFITS:
• Xtreme pressure film strength
• Lubricates, stops squeaks & noise
• Frees sticky/rusted parts
• Protects metal from rusting
• Retards electrical corrosion
• Displaces moisture
• Non-toxic, environmentally friendly
18
Synthetic EP-1 Grease
Pumpable Synthetic
o
o
from – 60 F to 650 F !
APPLICATIONS:
Long lubricant dispensing lines
Extreme hot or cold conditions
Wet and hot end use for roll neck
journal bearings
Heavily loaded hinge pins, couplings,
CV and universal joints
Rolling mills, slabbing mills
Truck chassis, wheel bearings, general
lube points
19
SUPERIOR PERFORMANCE:
 Extreme temperature range
 Extreme pressure protection
 Water resistance
 Oxidation & corrosion resistance
 Cling capability
 Seal compatibility
 Low oil bleed characteristics
REDUCES:
 Heat, friction, noise & wear
 Corrosion
 Downtime
 Power consumption
Multipurpose EP-2 Grease
Extreme Performance
o
o
from – 40 F to 615 F !
APPLICATIONS:
20
Industrial
Manufacturing
Commercial
Marine
Automotive
Mining
Construction
Agricultural
SUPERIOR PERFORMANCE:
 Load carrying ability
 Shear stability
 Water resistance
 Oxidation & corrosion resistance
 Cling capability
 Seal compatibility
REDUCES:
 Heat, friction, noise & wear
 Corrosion
 Downtime
 Power consumption
Lithium/ Moly Grease
Heavy Duty Lithium Grease
With 5% Moly
IDEAL FOR USE:
21
Heavily loaded bushings, ball and
roller bearings
Heavy duty truck wheel bearings &
fifth wheel
Automatic lube systems
Bucket pins
Swing arms
Chassis points
Sliding surfaces
Turn tables
Conveyors
Couplings
SUPERIOR PERFORMANCE:
 Extreme pressure protection
 Heavy load carrying ability
 Good shear stability
 Highly resistant to water wash
 Rust & corrosion inhibitors
 Cling capability
 Low oil bleed characteristics
 Good thermal, oxidative and
mechanical stability
REDUCES:
 Heat, friction, noise & wear
 Corrosion
 Downtime
 Power consumption
Industrial Oil Concentrate
Superior Performance
for Industrial Applications
BOTTOM LINE BENEFITS:
APPLICATIONS
Use at 10% by total volume
22
Cold-heading
Stamping
Slitting machines
Threading
Compressors, Generators
Pumps, Gear boxes
Heavy chains & Sprockets
Ball & roller bearings
• Extends life of gears, cams & dies
• Improves speed & feed rates
• Improves surface finishes
• Reduces down time
• Cuts down wear & tear
• Less power consumption
• Reduces smoke & noise
• Extends machine life
Hydraulic Treatment
Unsurpassed Lubrication ..
And Environmentally Friendly!
BOTTOM LINE BENEFITS:
APPLICATIONS:
Hydraulic systems
Power transmission equipment
Injection molding machines
Railroad equipment
Refineries & oil field equipment
Paper and pulp mills
Mining & smelter equipment
Automatic Transmissions
Power steering units
Pumps & Rams
DILUTION RATIOS:
23
Hydraulic Systems:
10% by volume
Wet bath clutches, brakes: 5% by volume
Automatic transmissions: 2% by volume
• Lowers friction & operating temperatures
• Protects against wear
• Reduces electrolysis
• Displaces moisture
• Prevents oxidation & corrosion
• Helps extend equipment life
• Compatible with petroleum & synthetics
• Helps to protect & condition seals
• Optimum run times .. less down time
Engine Life Treatment
Reduces Friction,
Heat & Wear
BOTTOM LINE BENEFITS:
24
DIRECTIONS
For 4-6 quart capacity engines pour
12oz into motor oil crankcase.
For larger capacity engines use at 10%
by total volume.
• Withstands friction & high temperatures
• Protects engine from wear
• Prevents oxidation & corrosion
• Protects & conditions seals
• Extends oil change intervals
• Helps optimize engine performance
• Maximizes fuel economy
• Protects from wear at start-up
Heavy Duty Oil Stabilizer
If it Smokes, Burns, Leaks Oil,
or Needs Extra Protection
BOTTOM LINE BENEFITS:
DIRECTIONS
% by volume
Regular gas engines
Badly worn engines
Diesel engines
Commercial/Industrial
Marine engines
Motorcycle/Marine engines
4-stroke motorcycles
with Wet Clutches
Manual Transmissions
Differential & Gear Boxes
25
20%
40%
20%
20%
20%
20%
10%
20%
20%
• Stops oil burning & oil leaks
• Slows blow-by, smoking & oil contamination
• Protects against wear to extend engine life
• More power with better fuel economy
• Provides dry start protection
• Easier starting at all temperatures
• Increases oil pressure
• Conditions seals to extend life
• Stops thermal breakdown
• Quiets engines & gear boxes
• Extends oil life by 50% or more
ACA Cutting Oil
Air Craft Approved (ACA) for Titanium
Cuts tool wear.
Cuts downtime.
Cuts costs...
APPLICATIONS:
Screw machines
CNC machining
Lathes
Roll threading
Stamping
Grinding
Gear hobbing
Sawing
Slitting machines
Threading
Turning
VMC’s
Metalforming
26
Use at full-strength
For all ferrous and
non-ferrous alloys
Ideal for:
• Alloy steel
• Stainless steel
• Titanium
• Waspalloy
• Inconel
• Mild steel
• Aluminum
• Copper alloys
BOTTOM LINE BENEFITS:
• Improves speed & feed rates
• Reduces down time
• Cuts down wear from metal removal
• Improves surface finishes
• Lowers power consumption
• Reduces smoke & noise
• Extends machine & tool life
• Resistant to foaming
• Corrosion resistant
Bio-Stable
Water Soluble Cutting Fluid
Earth-friendly Formula ..
ROI Friendly Performance
APPLICATIONS/DILUTION RATIOS
27
Reaming & Boring
Drilling & Tapping
Milling
Turning
Sawing
Stamping
Grinding
Quenching
10:1 to 15:1
10:1 to 15:1
10:1 to 15:1
15:1 to 30:1
15:1 to 30:1
15:1 to 30:1
30:1 to 50:1
30:1 to 50:1
BOTTOM LINE BENEFITS:
• Increases production rates
• Improves tolerances & finish
• Extends tool and machine life
• Reduces edge buildup, welding & tearing
• Extends sump life
• Biocides to control rancidity
• Retards bacteria and fungus
• Reduces down time
• Lowers power consumption & noise
• Resistant to foaming
• Soft & hard water emulsification
• Operator friendly – safe, no odors
• No extreme hazard disposability issues
Synthetic
Water Soluble Cutting Fluid
The Ultimate Performance to
Improve your Bottom Line
APPLICATIONS/DILUTION RATIOS
28
Reaming & Boring
Drilling & Tapping
Milling
Turning
Sawing
Stamping
Grinding
Quenching
10:1 to 15:1
10:1 to 15:1
10:1 to 15:1
15:1 to 30:1
15:1 to 30:1
15:1 to 30:1
30:1 to 50:1
30:1 to 50:1
BOTTOM LINE BENEFITS:
• Increases speed & feed rates
• Improves surface finish
• Extends tool life
• Reduces edge buildup, welding & tearing
• Extends life of cutting solution
• Retards bacteria growth
• Reduces down time
• Lowers power consumption
• Cuts down noise
• Resistant to foaming
• Soft & hard water emulsification
• No hazardous ingredients
• No harmful vapors
Downhole
Drilling &
Mining
Down hole Drilling Fluid
ProOne Knows the Drill
BOTTOM LINE BENEFITS:







Over 70% reduction in friction
Less downtime - more production
Extends drill bit life
Reduces torque
Lowers operating temperatures
Eliminates up to 94% of electrolysis
Displaces moisture
AND


30

Biodegradable!
No diesel fuel added to well
No disposability issues
Rock Drilling Oil
Oil of FAME !!!
BOTTOM LINE BENEFITS:







31
Extreme pressure protection
Reduce friction & lower operating
torque
Excellent oxidation resistance
High solvency characteristics
Prevents sluggish valve action
Protect components form running dry
Environmentally friendly without lead,
Chlorine, Phosphorus or Antimony
Waterless
Wash & Shine
Waterless Wash & Shine
Cleans, Shines & Protects ...
.. Without Water ..
.. Without Scratching ..
BOTTOM LINE BENEFITS:
• Only 15 minutes for an average car
• No buckets, hose or sponge required
• No mess to clean up
• Citrus-based formula cleans bugs, tar,
tree sap, bird droppings, water spots
• Just-waxed shiny coating beads water
for 4 weeks
• For paint, chrome or glass
33
Waterless Wash & Shine
WON’T SCRATCH THE FINISH
1. Surrounds
and lifts dirt
particles.
34
2. Wipes off dirt
without
scratching
3. Leaves clean,
shiny, smooth,
protected finish.
SPECIAL REQUESTS
Technology & Products:
 Technology Demo Video’s
 Material Safety Data Sheets
 Technology Specifications and Applications
 Brochures
CONTACT US
 Email:
admin@pro-one.co.za
 Website: www.pro-one.co.za
35