SRX-Pro Server
VMS Software Review
VMS Software Reviews
•
•
•
•
•
•
Installing new analog cameras onto the
system
Installing new IP cameras onto the system
Set cameras’ frame rate, resolution, and types
of recordings (motion, sensor, continuous, and
VAR)
Configuring cameras for Intelli-Zone, IntelliGuard, and Video Analytics features
Applying cameras’ features and function
Administrating SRX-Pro
SRX-Pro Server, Hardware Setup
Hardware
• Where do I enter the PTZ ID?
• What is “A/P”?
• How many control inputs and outputs I can
have on an IP system?
• What is “Linked Channel” and “Linked
Control”?
• What is “Spot monitor(s) follow main
screen”?
SRX-Pro Server, Recording/Display Setup
Recording and Displaying Setup
• What are the type of resolutions are
available for analog cameras?
• As I increase the frame rate, will I loose
my resolution?
• What are the file sizes for different frame
rates and resolutions?
• How can I use this to calculate my hard
drive storage requirements?
SRX-Pro Server, Motion Setup
Motion Setup
• What is the significance of “Enable Full
Screen” feature?
• What happens if the motion area is clear?
• What is the purpose of the “Dwell” time?
• How many motion areas can I draw for
one camera?
SRX-Pro Server, Schedule Setup
Schedule Setup
• What are the 4 types of available schedule
setup?
• How many channels of VAR can I have on
a basic unit?
• What is the maximum number of VAR
channels I can have?
SRX-Pro Server, User Management Setup
User Management Setup
• How can I hide a camera from a user?
• How can I disable a setup menu?
• What administrative rights should I provide
to my end-user?
• How many user accounts can I create?
SRX-Pro Server, Server Info
Server Info
• Can I change the IP address for the DVMS
Server from this setup tab?
• What is the difference between SRX-Pro Sever
IP address and public IP address?
• What steps do I need to follow to connect to
SRX-Pro Server using a public IP address or
dynamic IP address?
• Can Server ID be something other than a
number?
• Why do I need to have Server ID?
SRX-Pro Server, System Setup
System Setup
• Why do I need to reboot my SRX-Pro
Server?
• What types of the reboot are available?
• What is “NTP Server List”?
• What is “Activate Sensor Backup” feature
used for?
• When would I use Server Settings Export
and Import?
SRX-Pro Server, IntelliGuard Setup
IntelliGuard Setup
•
•
•
•
What is the purpose of IntelliGuard?
What application is it best to be used for?
How do I activate sound?
Where do I record sound?
SRX-Pro Server, Communication Setup
Communication Setup
• What are the important ports that need to
be configured?
• What is the “CMS Settings” section for?
SRX-Pro Server, Text Overlay Setup
Text Overlay Setup
• What is text overlay?
• How many text overlay areas (boxes) can I
draw?
• Can I have two cash registers on two
same cameras?
• What is “Intelligent Text Overlay”?
SRX-Pro Server, IntelliZone Setup
IntelliZone
• What type of application would I use
IntelliZone?
• For IntelliZone to work properly, what type
of cameras do I need?
• Where do I set preset for my PTZ?
SRX-Pro Server, VideoLogix Setup
VideoLogix Setup
• VideoLogix provides the following:
– Enters Area, Crossed Line, Idles in Area, Missing
from Area, Moves in Direction type alarm
• VisionCount
– DriveThrough, Register, Region and DoorCount
• For Instruction on configuring VideoLogix please
refer SRX-Pro Manual “SRX-Pro Server and
Remote User Manual, v.2.3.pdf” VideoLogix pages 106-115/VisionCount - pages 116-118
• Maximum number of Video Analytics channels
supported by the SRX-Pro Server is 16
SRX-Pro Server, VisionCount Setup
SRX-Pro Server, IP Camera Setup
IP camera setup
• GiPi – what is it?
• Annexxus Finder – what is it for?
• Same IP Address range – why do I need
it?
• What steps I need to follow to configure an
IP camera?
IP Camera Setup
• GiPi: Generic IP Interface
– Interface between different IP cameras and
SRX-Pro software, iDisplay, and Video Pilot
– Each IP camera has its own way of
communication and GiPi allows the
communication between the camera and i3
software
– Please refer to “Master Integration List for IP
Cameras and Encoders” for a complete list of
GiPi-integrated IP cameras
Annexxus Finder
• A software application that
allows the technician to find all
of i³ IP camera and UIO8 on a
network
• Annexxus Finder will also
display a limited number of IP
cameras from other
manufacturers from the GiPi
integration list
• Please follow the instruction
on
“Annexxus_Finder_v.3.0.pdf”
Same IP Address range – why do I
need it?
• Changing IP address on the
Annexxus Camera needs to
have the same range
• The SRX-Pro needs to have
same range to
communicate
• You can add a second IP
address to your network
card to make configuring
your IP Cameras a little
easier under “Advanced
TCP/IP setting”
Adding IP address on SRX-Pro
Software
• For instruction on changing / setting the IP
address for an IP camera, please refer to
the Annexxus Finder Manual,
“Annexxus_Finder_v.3.0.pdf”