In Vehicle Camera
WIFI Adapter Setup
(listen OR read along)
For Additional Help:
Call 888-286-9829
or
E-mail info@safetytrack.net
or
Visit www.safetytrack.net/camera-wifi-setup
Contents
Slides
•
•
•
•
•
•
•
3-5: Features
6-8: How the Camera Works
9-14: Configuring Server
15-17: Configuring Camera Viewer Software
18-20: Configuring WIFI Adapter Settings
21-23: Configuring Janus Search Software
24-25: Troubleshooting
** Pay close attention to slides 18-20. These steps must be followed
precisely or your WIFI adapter will not work properly.
Safety Track’s In Vehicle Camera
• Small Compact Design
• Impact Resistant Plastic
• Windshield Mount Design
• Locking Security Bracket
• Customizable Profile
• 5 Event Settings
• Events can’t be over written
• Up to 32GB SD Card
• 90 Hours of Record Time
• Night Vision Recording
Features
Install camera to the right of the rear view mirror.
If your vehicle does not have a rear view mirror, place the camera in a
similar position so the front camera can view outward, and the rear
camera can view the vehicle’s cabin.
WIFI Adaptor
Components:
1: Camera
2: WIFI Adapter
3: Cable and WIFI Connector
• With the optional WIFI Adaptor, you can have wireless
downloading of data.
WIFI Diagram
Data travels from the camera, to the WIFI Adapter, and wirelessly
transmits to your computer through its’ router
Camera powers WIFI adapter
Wireless
USB
USB
Cable
Data Flow
Power Flow
Server & Client Configuration
Wireless
Router
Wired
Connection
FTP Server
-orCustomer Computer
Wireless Connections
Vehicle
1
Vehicle
2
Vehicle
3
Vehicle
4
An infinite number of vehicles can be
configured to transmit through a single
router.
Vehicle
5
Vehicle
6
Typical Download Scenario
Once WIFI adapter is installed, vehicle must be at rest for 3
minutes within WIFI router range to download camera data.
Configuration/Installation
We will now begin installing and
configuring the camera’s programs
and server from your computer.
Slides
•
•
•
•
10-13: Configuring Server
14-17: Configuring Camera Viewer Software
18-21: Configuring WIFI Adapter Settings
22-24: Configuring Janus Search Software
Create New Folder in Program Files
Name the folder whatever you’d prefer
Create a ‘New Folder’ in your program files folder located on your
C: drive (you may name this folder anything you like).
This folder is where your camera files will be saved.
Go to: www.safetytrack.net/zftp.exe
Download ZFTP Server
Go to www.safetytrack.net/zftp.exe to download and
install ZFTP Server Suite.
Double click the downloaded file or press ‘ Run ’ and proceed to
the next slide for installation instructions.
Installing ZFTP Server
•
•
•
Step 1: Agree to the Terms
Step 2: Check to install
zFTP Server and
zFTP Server administration
Step 3: Create an administration
password and remember the
password as it will be needed in
future steps
ZFTP Server
(Set up)
Once the ZFTP Server is installed, open the program.
Enter the username ‘Admin’ and the password you chose from
the previous slide.
Once opened, click ‘Setup’, then click ‘Accounts’.
ZFTP Server
User Settings
1. Click ‘Users’,
then click ‘Admin’.
2. Next, Click ‘Add
Resource’ and
locate the folder
you created in
Program Files.
3. Check all of the
boxes under
Files and
Directories
www.safetytrack.net/support/installation
Viewer Download
Go to www.safetytrack.net/downloadviewer.exe to download the
Camera Viewing Software.
When the installation is complete, open the Camera Viewing Software.
Janus Viewer
Vehicle Information
Click ‘User Settings’
Fill in information
Under the ‘Car Info’
tab.
Find Your IP Address
(Command prompt)
Click the ‘Start
Menu’ in the lower
left of your
computer
Click ‘Run’ and
type in ‘cmd’
(if you’re using
windows 7, click
the ‘Start Menu’ and
type ‘cmd’ in the
search box.)
When the
Command Prompt
opens, type in
‘ipconfig’ to find
your IP address.
(sample IP address, yours
will be different)
**Write down/save your IP address number**
WIFI Set Up
While still in the
camera setup menu,
click ‘Wireless’.
Enter your ZFTP
UserID (which is
probably ‘Admin’) and
the ZFTP password
we set up earlier.
Enter your computer’s
IP Address
Wireless Router Info
Enter your router’s
name and password/key.
(configured when you set
up your router, the same
name/password other
wireless devices use)
Set the ‘Auth Mode’ to
‘WPAPSK’
Set the ‘Encryp Type’ to
‘AES’
Press ‘OK’ to save
settings
www.safetytrack.net/support/installation
Janus Search Download
Go to www.safetytrack.net/support/installation
Click ‘Janus Search File’ and follow the download and
installation instructions.
Janus Search Software
After installation, open
the Janus Search
Software
Upon opening, point the
software to the new folder
we created in your
Program Files folder
The Janus Search
Software will organize
these data files so they
may be located with ease
Data Management Software
Example of how the software should look after loading files
Trouble Shooting
Trouble Shooting Cont.